RF exposure info-MPE

FCC ID: V7TPA7

RF Exposure Info

Download: PDF
FCCID_4327443

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE143425 Page: 1 of 4 Maximum Permissible Exposure Evaluation FCC ID: V7TPA7 1. Client Information Applicant : SHENZHEN TENDA TECHNOLOGY CO.,LTD 6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road, Nanshan Address : District, Shenzhen, China. 518052 Manufacturer : SHENZHEN TENDA TECHNOLOGY CO.,LTD 6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road, Nanshan Address : District, Shenzhen, China. 518052 2. General Description of EUT EUT Name : AV 1000 AC Wi-Fi Powerline Extender Models No. : PA7 Brand Name : / Operation Frequency: 2.4G: 802.11b/g/n(HT20): 2412MHz~2462MHz 802.11n(HT40): 2422MHz~2452MHz 5G : U-NII-1: 5150MHz~5250MHz U-NII-3: 5725MHz~5850MHz Number of 2.4G: 802.11b/g/n(HT20): 11channels Channel: 802.11n(HT40): 7channels 5G: U-NII-1: Product 20MHz Bandwidth: 4 channels Description : 40MHz Bandwidth: 2 channels 80MHz Bandwidth: 1 channels U-NII-3: 20MHz Bandwidth: 5 channels 40MHz Bandwidth: 2 channels 80MHz Bandwidth: 1 channels Output Power 802.11b: 10.835 dBm 802.11g: 14.463dBm 802.11n (HT20): 14.776 dBm 802.11n (HT40): 13.680 dBm TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE143425 Page: 2 of 4 5G: U-NII-1: 802.11a: 14.641dBm 802.11n(HT20): 14.522dBm 802.11n(HT40): 14.653dBm 802.11ac(20): 14.763dBm 802.11ac(40): 14.547dBm 802.11ac(80): 14.490dBm U-NII-3: 802.11a: 14.830dBm 802.11n(HT20): 14.853dBm 802.11n(HT40): 15.087dBm 802.11ac(20): 14.756dBm 802.11ac(40):15.050 dBm 802.11ac(80): 15.070dBm 2412MHz~2462MHz:2.3 dBi (PIFA Antenna) Antenna Gain: 5150MHz~5850MHz:4.1 dBi (PIFA Antenna) Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK) 802.11g: QPSK , BPSK, 16QAM , 64QAM with OFDM 802.11n: BPSK , QPSK , 16QAM ,64QAM with OFDM 802.11a: OFDM (QPSK, BPSK, 16QAM) 802.11ac: OFDM (QPSK, BPSK, 16QAM, 64QAM, 256QAM) Bit Rate of 802.11b:11/5.5/2/1 Mbps Transmitter: 802.11g:54/48/36/24/18/12/9/6 Mbps 802.11n:up to 150Mbps 802.11a: 6/9/12/18/24/36/48/54 Mbps 802.11ac: at most 433.3 Mbps Power Rating : Input/Output: AC100V-240V,0.1A,50/60Hz Connecting I/O : Please refer to the User's Manual Port(S) Note:More detail information about Equipment, please refer to User’s manual, more information about the RF，please refer to test report. TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Report No.: TB-MPE143425 Page: 3 of 4 MPE Calculations for WIFI 1. Antenna Gain: 2412MHz~2462MHz:2.3 dBi (PIFA Antenna) 5150MHz~5850MHz:4.1 dBi (PIFA Antenna) 2. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Test Result: Worst Maximum MPE Result Turn-up ANT Power Power Power Distance Frequency Gain Density Mode NTX (dBm) including (cm) (MHz) (dBi) (mW/ cm2) [P] Tolerance [R] [G] [S] (dBm) 2.4G 802.11b 1 2437 10.835 2.3 10±1 20 0.0043 802.11g 1 2462 14.463 2.3 14±1 20 0.0107 802.11n 1 2462 14.776 2.3 14±1 20 0.0107 (HT20) 802.11n 1 2452 13.680 2.3 14±1 20 0.0107 (HT40) 5G U-NII-1 802.11a 1 5200 14.641 4.1 14±1 20 0.0162 802.11n 1 5200 14.522 4.1 14±1 20 0.0162 (HT20) 802.11ac 1 5200 14.763 4.1 14±1 20 0.0162 (HT20) 802.11n 1 5190 14.653 4.1 14±1 20 0.0162 (HT40) 802.11 1 5190 14.547 4.1 14±1 20 0.0162 ac(40) 802.11 1 5210 14.490 4.1 14±1 20 0.0162 ac(80) TB-RF-075-1.0

Report No.: TB-MPE143425 Page: 4 of 4 5G U-NII-3 802.11a 1 5825 14.830 4.1 14±1 20 0.0162 802.11n 1 5825 14.853 4.1 14±1 20 0.0162 (HT20) 802.11ac 1 5825 14.756 4.1 14±1 20 0.0162 (HT20) 802.11n 1 5755 15.087 4.1 15±1 20 0.0204 (HT40) 802.11 1 5755 15.050 4.1 15±1 20 0.0204 ac(40) 802.11 1 5775 15.070 4.1 15±1 20 0.0204 ac(80) Note: (1) NTX= Number of Transmit Antennas (2) RF Output power specifies that Maximum Conducted Peak Output Power for 2.4G and Maximum Conducted Average Output Power for 5G. (3) Maximum Output Power including Turn-up Tolerance was used to calculate MPE. 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range Power density (MHz) (mW/ cm2) 300-1,500 F/1500 1,500-100,000 1.0 For 2.4G: 802.11b/g/n (2412~2462 MHz) 5G: U-NII-1: 5150MHz~5250MHz U-NII-3: 5725MHz~5850MHz MPE limit S: 1 mW/ cm2 The MPE is calculated as 0.01650632mW / cm2 < limit 1 mW / cm2. So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. TB-RF-075-1.0


Document Created: 2019-06-21 10:52:45
Document Modified: 2019-06-21 10:52:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC