RF Exposure Information

FCC ID: V7TN60

RF Exposure Info

Download: PDF
FCCID_1764415

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: R1DG120716001-00B FCC §15.407 (f), §2.1091, §1.1307(b) (1) – RF EXPOSURE EVALUATION Applicable Standard According to subpart 15.247(i)and subpart §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range Electric Field Magnetic Field Power Density Averaging Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. Calculated Formulary: Predication of MPE limit at a given distance S = PG/4πR² = power density (in appropriate units, e.g. mW/cm2); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); Calculated Data: Frequency Antenna Gain Conducted Power Evaluation Power MPE Mode Distance Density Limit (MHz) (dBi) (numeric) (dBm) (mW) (cm) (mW/cm2) (mW/cm2) 802.11a 5240 5.0 3.16 12.23 16.71 20 0.0105 1.0 802.11n 5180 5.0 3.16 12.3 16.98 20 0.0107 1.0 ht20 802.11n 5230 5.0 3.16 12 15.85 20 0.0100 1.0 ht40 Result: The device meet FCC MPE at 20cm distance FCC Part 15.407 Page 9 of 78


Document Created: 2012-08-12 16:55:35
Document Modified: 2012-08-12 16:55:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC