18_i24 RFExp

FCC ID: V7TI24

RF Exposure Info

Download: PDF
FCCID_4193060

FCC RF EXPOSURE REPORT FCC ID: V7TI24 Project No. : 1901C087 Equipment : AC1200 Wave2 Gigabit Access Point Test Model : i24 Series Model : N/A Applicant : SHENZHEN TENDA TECHNOLOGY CO.,LTD Address : 6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052 According: : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 Report No.: BTL-FCCP-3-1901C087 Page 1 of 5 Report Version: R00

1. GENERAL SUMMARY Equipment : AC1200 Wave2 Gigabit Access Point Brand Name : Tenda Test Model : i24 Series Model : N/A Applicant : SHENZHEN TENDA TECHNOLOGY CO.,LTD Manufacturer : SHENZHEN TENDA TECHNOLOGY CO.,LTD Address : 6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052 Date of Test : Jan. 18, 2019~Feb. 23, 2019 Test Sample : Engineering Sample No.: D190100581 Standards : FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-3-1901C087) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of A2LA according to the ISO/IEC 17025 quality assessment standard and technical standard(s). Report No.: BTL-FCCP-3-1901C087 Page 2 of 5 Report Version: R00

2. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Antenna Specification: For WLAN 2.4G: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A Internal N/A 2.7 2 N/A N/A Internal N/A 3 Note: (1) The EUT incorporates a MIMO function. Physically, the EUT provides two completed transmitters and receivers (2T2R),any transmit signals are correlated with each other, so Directional gain =10log[(10G1/20+10G2/20+...10GN/20)2/N]dBi, that is Directional gain= 10log[(102.7/20+103/20)2/2]dBi =5.86 . (2) Beamorming Gain: 3dB. Directional gain=3+3=6 For RLAN 5G: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A Internal N/A 4.5 2 N/A N/A Internal N/A 4.5 Note: The EUT incorporates a MIMO function. Physically, the EUT provides two completed transmitters and receivers (2T2R), all transmit signals are completely correlated, so, (1) For Non Beamforming function, Directional gain=GANT+Array Gain, For power spectral density measurements, Array Gain=10log(NANT/NSS) dB Directional gain=4.50+10log(2/1) =7.51dBi. So, the UNII-1 power density limit is 17-(7.51-6)=15.49 the UNII-3 power density limit is 30-(7.51-6)=28.49 (2) For Beamforming function, Beamforming gain: 3dB, So, Directional gain=3+4.50=7.50dBi. Then, the output power limit is 30-7.50+6=28.50, the UNII-1 power density limit is 17-(7.50-6)=15.50, the UNII-3 power density limit is 30-(7.50-6)=28.50. Report No.: BTL-FCCP-3-1901C087 Page 3 of 5 Report Version: R00

3. TEST RESULTS WLAN 2.4G Non-Beamforming: Directional Directional Peak Output Power Limit of Power Peak Output Test gain gain Power Density (S) Density (S) Power (dBm) Result (dBi) (numeric) (mW) (mW/cm2) (mW/cm2) 5.86 3.8548 27.16 519.9960 0.39898 1 Complies WLAN 2.4G Beamforming: Directional Directional Peak Output Power Limit of Power Peak Output Test gain gain Power Density (S) Density (S) Power (dBm) Result (dBi) (numeric) (mW) (mW/cm2) (mW/cm2) 6 3.9811 26.61 458.1419 0.36304 1 Complies 5G Band UNII-1 Non-Beamforming: Max Max Directional Directional Power Limit of Power Conducted Conducted Test gain gain Density (S) Density (S) Output Power Output Power Result (dBi) (numeric) (mW/cm2) (mW/cm2) (dBm) (mW) 7.51 5.6364 26.99 500.0345 0.56098 1 Complies 5G Band UNII-1 Beamforming: Max Max Directional Directional Power Limit of Power Conducted Conducted Test gain gain Density (S) Density (S) Output Power Output Power Result (dBi) (numeric) (mW/cm2) (mW/cm2) (dBm) (mW) 7.50 5.6234 26.81 479.7334 0.53697 1 Complies 5G Band UNII-3 Non-Beamforming: Max Max Directional Directional Power Limit of Power Conducted Conducted Test gain gain Density (S) Density (S) Output Power Output Power Result (dBi) (numeric) (mW/cm2) (mW/cm2) (dBm) (mW) 7.51 5.6364 26.34 430.5266 0.48300 1 Complies 5G Band UNII-3 Beamforming: Max Max Directional Directional Power Limit of Power Conducted Conducted Test gain gain Density (S) Density (S) Output Power Output Power Result (dBi) (numeric) (mW/cm2) (mW/cm2) (dBm) (mW) 7.50 5.6234 26.29 425.5984 0.47638 1 Complies Report No.: BTL-FCCP-3-1901C087 Page 4 of 5 Report Version: R00

For the max simultaneous transmission MPE: Power Density (S) Power Density (S) Limit of Power (mW/cm2) (mW/cm2) Total Density (S) Test Result 2.4G 5G (mW/cm2) 0.39898 0.56098 0.95996 1 Complies Note: the calculated distance is 20 cm. End of Test Report Report No.: BTL-FCCP-3-1901C087 Page 5 of 5 Report Version: R00


Document Created: 2019-07-05 02:05:03
Document Modified: 2019-07-05 02:05:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC