RF Exposure

FCC ID: V7TB6

RF Exposure Info

Download: PDF
FCCID_4352677

Bay Area Compliance Laboratories Corp. (Dongguan)                               Report No.: RDG190521008-00B

FCC §15.407 (f) & §1.1310 & §2.1091- MAXIMUM PERMISSIBLE
EXPOSURE (MPE)
Applicable Standard
According to subpart 15.407(f)and subpart §1.1310, systems operating under the provisions of this
section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy
level in excess of the Commission’s guidelines.

Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091)

                          (B) Limits for General Population/Uncontrolled Exposure
Frequency Range         Electric Field       Magnetic Field        Power Density                Averaging Time
     (MHz)             Strength (V/m)        Strength (A/m)           (mW/cm2)                    (minutes)
    0.3–1.34                 614                   1.63                 *(100)                        30
    1.34–30                 824/f                 2.19/f               *(180/f²)                      30
    30–300                  27.5                  0.073                   0.2                         30
   300–1500                   /                      /                  f/1500                        30
 1500–100,000                 /                      /                    1.0                         30

f = frequency in MHz; * = Plane-wave equivalent power density;

According to §1.1310 and §2.1091 RF exposure is calculated.


Calculation formula:

Prediction of power density at the distance of the applicable MPE limit
S = PG/4R² = power density (in appropriate units, e.g. mW/cm2);
P = power input to the antenna (in appropriate units, e.g., mW);
G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain
factor, is normally numeric gain;
R = distance to the center of radiation of the antenna (appropriate units, e.g., cm);


Calculated Data:

                                             Max. Target Power
                                                                     Evaluation        Power        MPE
       Frequency         Antenna Gain             including
                                                                      Distance        Density       Limit
         Range                                    Tolerance
                                                                       (cm)           (W/m2)       (W/m2)
                      (dBi)    (numeric)     (dBm)       (mW)
       5150-5250       12        15.85          9        7.9433         20.00          0.03          1.0
       5725-5850       12        15.85         20        100.00         20.00          0.32          1.0

Note 1: the Max. Target Power including Tolerance was declared by manufacturer.

Result: Compliance, The device meets MPE requirement for Devices Used by the General Public
(Uncontrolled Environment) at distance ≥20 cm.




                                                                                                    Page 12 of 75



Document Created: 2019-07-11 19:26:59
Document Modified: 2019-07-11 19:26:59

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC