18_A9 RFExp

FCC ID: V7TA9V2

RF Exposure Info

Download: PDF
FCCID_4295456

FCC RF EXPOSURE REPORT FCC ID: V7TA9V2 Project No. : 1901C127 Equipment : Wireless N300 Universal Range Extender Model Name : A9 Series Model : N/A Applicant : SHENZHEN TENDA TECHNOLOGY CO.,LTD Address : 6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052 According: : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 Report No.: BTL-FCCP-2-1901C127 Page 1 of 4 Report Version: R00

1. GENERAL SUMMARY Equipment : Wireless N300 Universal Range Extender Brand Name : Tenda Test Model : A9 Series Model : N/A Applicant : SHENZHEN TENDA TECHNOLOGY CO.,LTD Manufacturer : SHENZHEN TENDA TECHNOLOGY CO.,LTD Address : 6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052 Date of Test : Feb. 25, 2019 ~ Mar. 15, 2019 Test Sample : Engineering Sample No.: D190201575 Standards : FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-2-1901C127) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of A2LA according to the ISO/IEC 17025 quality assessment standard and technical standard(s). Report No.: BTL-FCCP-2-1901C127 Page 2 of 4 Report Version: R00

2. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Antenna Specification: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A Dipole N/A 2.7 2 N/A N/A Dipole N/A 2.7 Note: (1) Antenna Gain=2.7dBi. This EUT supports MIMO 2X2, any transmit signals are correlated with each other, so Directional gain = GANT+10log(N)dBi, that is Directional gain=2.7+ 10log(2)dBi=5.71. (2) Beamforming Gain: 3dB, so Directional gain=2.7+3=5.7. The worst case for 1TX / 2TX as follow: Operating Mode 1TX 2TX TX Mode IEEE 802.11b V (ANT 2) - IEEE 802.11g V (ANT 2) - IEEE 802.11n (HT20) - V (ANT 1 + ANT 2) IEEE 802.11n (HT40) - V (ANT 1 + ANT 2) Report No.: BTL-FCCP-2-1901C127 Page 3 of 4 Report Version: R00

3. TEST RESULTS For 2.4GHz Non-Beamforming: Directional Directional Max. Output Max. Output Power Limit of Power Test Gain Gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 5.71 3.7239 29.17 826.0379 0.61228 1 Complies For 2.4GHz With Beamforming: Directional Directional Max. Output Max. Output Power Limit of Power Test Gain Gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 5.70 3.7154 28.95 785.2356 0.58070 1 Complies Note: The calculated distance is 20 cm. End of Test Report Report No.: BTL-FCCP-2-1901C127 Page 4 of 4 Report Version: R00


Document Created: 2019-05-22 08:38:29
Document Modified: 2019-05-22 08:38:29
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC