Users Manual

FCC ID: V7TA9

Users Manual

Download: PDF
FCCID_3071832

LED Red Option 2: Solid: The device is starting Blinking Slowly: The device is negotiating with a router/AP Use WPS Button to Extender Your WiFi Detecting signal with auto-extending feature (hasn't developed yet) Blinking quickly: The device is performing WPS negotiation to a router/AP Plug the extender (A9) into an electrical outlet near your wireless router Press the WPS button on your router, and then (within 2 minutes) press the button Green 1 (with WPS enabled). 2 on the extender. Install Guide Solid: Extended successfully, the WiFi signal is strong Orange Wireless N300 Universal Range Extender Solid: Extended successfully, the WiFi signal is poor Blinking: Extended successfully, the WiFi signal is very poor Model: A9 Button Use the end of a paper clip or a similar object to press and hold this button for RST about 8 seconds, and then release it to restore the extender to factory settings. Press The LED indicator on the extender Press this button and then (within 2 minutes) press WPS button on a router/AP will be solid red when it is starting; to establish a WPS connection. and then starts blinking indicating When the LED indicator turns to solid green, successful start. it indicates that a successful WPS connection has been established. Enjoy your WiFi! The extender's WiFi name and password are the same as those of your Option 1: 3 Relocate the extender to other electrical outlet. Observe the LED indicator on the extender to choose an optimum extended location for best WiFi performance. 4 router. Use Web Browser to Extender Your WiFi Internet Poor Signal Blinking Orange Solid Orange Solid Green Plug the extender (A9) into an electrical outlet near Use your computer to search and connect to the extender's Select the WiFi name (SSID) you want to extend, and click 1 your wireless router. 2 WiFi. The default WiFi (SSID: Tenda_XXXXXX) is on the 4 Next. product label on the extender's back panel. www.tendacn.com Made in China Wireless N300 Universal Range Extender Model: A9 WiFi Name: Tenda_666666 Default Access: re.tenda.cn Power: AC100-240V 0.3A 50/60Hz Select WiFi Name > Enter Password WiFi Password: 00000000 MAC: C83A35XXXXXX FCC ID:V7TA9 Please select a WiFi name… IC:9034A-A9 Select WiFi Name Encryption/Signal Strength SSID: Tenda_XXXXXX Recommended S/N: Tenda_666666 extending location Tenda_office Keep moving the extender to outlets Tenda_ceshi closer to the router until the LED indicator Launch a web browser, type the default login domain name on the extender lights solid green. 3 re.tenda.cn or default login IP address 192.168.0.254 into Tenda_ssid The LED indicator on the extender Tenda_1EEFD8 the address bar, and tap Enter on the keyboard. WiFi Name: Tenda_666666 will be solid red when it is starting; Tips 1. You can also log in to the extender's web UI to check the WiFi signal strength WiFi Password: 00000000 and then starts blinking indicating (40%~79% is the optimum extending location). New Tab successful start. Next 2. Keep the extender away from Bluetooth devices, microwave, refrigerator, etc. re.tenda.cn to minimize signal interference. Enter the WiFi password of the selected WiFi name The device is performing extending process. Position the antennas as shown in the figure below for best WiFi performance. 5 (if any), and click Finish. 6 Wait for a moment. 7 Extended successfully. FAQ Be vertical to the ground Q1: I cannot log in to the extender's User Interface, what should I do? A1: Before extending 1.Use your computer to connect to the WiFi name (SSID) on the label of the extender's back panel; 2.Launch a web browser, type 192.168.0.254 or re.tenda.cn into the address bar and tap Enter on Select WiFi Name > Enter Password the keyboard. After extending Base Station WiFi Name: Tenda_666666 1.Use your computer to connect to the extended WiFi name (if you customize the WiFi name of the ........ extender, connect that); Wall Outlet 2.Launch a web browser, type re.tenda.cn into the address bar and tap Enter on the keyboard. √ Set up the extender's WiFi name and Power Strip password to the same as those of the Base Q2: What should I do if my router has no WPS button? Station Extending…Please wait… Extended Successfully! A2: Folow Option 1: Use Web Browser to Extend Your WiFi to set up the extender. The WiFi name of the extender is changed into Back Finish Tenda_666666, Please connect again. CE Mark Warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user should be installed and operated with minimum distance 20cm between the radiator & your body. may be required to take adequate measures. NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable. Tips If you don't want to set up the extender's WiFi name and password to the same as those to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable. of the selected WiFi name, uncheck the option before Set up the extender's WiFi name IC RSS warning and password to the same as those of the Base Station , customize the extender's Declaration of Conformity WiFi name and password, and then click Finish. Industry Canada(RSS-Gen Issue 4) Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD., declares that the radio equipment type A9 is in compliance with This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: Directive 2014/53/EU. Relocate the extender to other electrical outlet. Observe the LED indicator on the Enjoy your WiFi! The extender's WiFi name and password are the same as those of your (1) This device may not cause interference; and 8 extender to choose an optimum extended location for best WiFi performance. 9 router. The full text of the EU declaration of conformity is available at the following internet address: http://www.tendacn.com/en/service/page/ce.htm l (2) This device must accept any interference, including interference that may cause undesired operation of the device. Internet Operate Frequency：2412-2472 MHz EIRP Power(Max.)：19.5 dBm Software Version：V12.01.01.09 Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio Poor Signal exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : Blinking Orange Solid Orange Solid Green (1) l’appareil ne doit pas produire de brouillage; FCC Statement (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS- that may cause undesired operation. 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of Le dispositif rencontre l’exemption des limites courantes d’évaluation dans la section 2.5 de RSS 102 et la conformité à the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential l’exposition de RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur l’exposition et la conformité de rf. WiFi Name: Tenda_666666 WiFi Password: 00000000 installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This accordance with the instructions, may cause harmful interference to radio communications. However, there is no equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference body. Recommended to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged extending location to try to correct the interference by one of the following measures: Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur. Cet Reorient or relocate the receiving antenna. équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre Keep moving the extender to outlets Increase the separation between the equipment and receiver corps closer to the router until the LED indicator Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. on the extender lights solid green. Consult the dealer or an experienced radio/TV technician for help. Technical Support United States Hotline: 1-800-570-5892 Canada Hotline: 1-888-998-8966 HongKong Hotline: 00852-81931998 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance Skype: Tendasz Website: http:// www.tendacn.com E-mail: support@tenda.com.cn WiFi Name: Tenda_666666 could void the user's authority to operate this equipment . Copyright Tips 1. You can also log in to the extender's web UI to check the WiFi signal strength WiFi Password: 00000000 © 2016 Shenzhen Tenda Technology Co., Ltd. All rights reserved. (40%~79% is the optimum extending location). This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other brand and product names 2. Keep the extender away from Bluetooth devices, microwave, refrigerator, etc. to minimize signal interference. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications mentioned herein are trademarks or registered trademarks of their respective holders. Specifications are subject to to this equipment. change without notice. Address Info: 6-8 Floor, Tower E3, NO.1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052 Radiation Exposure Statement


Document Created: 2016-07-13 08:47:41
Document Modified: 2016-07-13 08:47:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC