18_A301 RFExp

FCC ID: V7TA301V4

RF Exposure Info

Download: PDF
FCCID_4506943

3UL Report No.: BTL—FCCP—2—1909C113 FCC RF EXPOSURE REPORT FCC ID: V7ZTA3O1V4 Project No. 1909C113 Equipment N300 Mini WiFi Range Extender Brand Name Tenda Test Model A301 Series Model N/A Applicant SHENZHEN TENDA TECHNOLOGY CO.,LTD Address 6—8 Floor, Tower E3, No. 1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052 Manufacturer SHENZHEN TENDA TECHNOLOGY CO.,LTD Address 6—8 Floor, Tower E3, No. 1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052 Date of Receipt Sep. 19, 2019 Date of Test Sep. 19, 2019 ~ Oct. 19, 2019 Issued Date Oct. 23, 2019 Report Version ROO Test Sample Engineering Sample No.: DG201909206 Standard(s) FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. yan tnt,. TOn Jtes Mb inHa Prepared by : Vincent Tan 27&# m\ x [ACCREDITED) Te & Approved by : Ethan Ma * "thid anhs* * Certificate #5123.02 Add: No.3, Jinshagang 1st Road, Shixia, Dalang Town,Dongguan, Guangdong, China. Tel: +86—769—8318—3000 Web: www.newbtl.com Page 1 of 4

Report No.: BTL-FCCP-2-1909C113 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue Oct. 23, 2019 Page 2 of 4

3UL Report No.: BTL—FCCP—2—1909C113 1. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Antenna Specification: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 Eflda= N/A Dipole N/A 3.46 2 Eflda= N/A Dipole N/A 3.46 Note: The EUT incorporates a MIMO function. Physically, the EUT provides two completed transmitters and receivers (2T2R), any transmit signals are correlated with each other, so Directional gain = Gay;+10log(N)dBi, that is Directional gain=3.46+10log(2)dBi=6.47. So, the output power limit is 30—6.47+6=29.53 the power spectral density limit is 8—6.47+6=7.53 Table for Antenna Configuration: Operating Mode TX Mode 1TX 2TX IEEE 802.11b V (Ant. 1) — IEEE 802.11g V (Ant. 1) — IEEE 802.11n(20 MHz) V (Ant. 1 + Ant. 2) IEEE 802.11n(40 MHz) V (Ant. 1 + Ant. 2) Page 3 of 4

Report No.: BTL-FCCP-2-1909C113 2. TEST RESULTS Tune up tolerance(dBm) 2.4GHz 1.5 Directional Directional Max. Output Max. Output Power Limit of Power Test Gain Gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 6.47 4.4361 30.32 1076.4652 0.95050 1 Complies Note: The calculated distance is 20 cm. Output power including tune up tolerance(tune up tolerance: 1.5 dBm). End of Test Report Page 4 of 4


Document Created: 2019-11-07 22:24:46
Document Modified: 2019-11-07 22:24:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC