HAC 13D

FCC ID: V65SCP-27H

Test Report

Download: PDF
FCCID_1073300

FCC ID: V65SCP-27H Exhibit 13 - APPENDIX D HAC T-Coil Data Plots Z (AXIAL) MEASUREMENT: CDMA 800 Channel 1013 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 12/11/2008 Communication System: CDMA; Frequency: 824.7 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH1013/z (axial) rough 50 x 50/ABM Interpolated Signal(x,y,z) (51x51x1): Measurement grid: dx=10mm, dy=10mm Cursor: ABM1 = -7.46 dB A/m BWC Factor = 0.0105903 dB Location: 3, -5, 363.7 mm Scans CH1013/z (axial) 16 x 16/ABM Interpolated Point meas,TCoil on CH1013/z (axial) at max z/ABM Signal(x,y,z) (41x41x1): Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -5.37 dB A/m ABM1 comp = -4.96 dB A/m BWC Factor = 0.0105903 dB BWC Factor = 0.0105036 dB Location: -0.2, -5, 363.7 mm Location: -1, -5, 363.7 mm Point meas,TCoil on CH1013/z (axial) at max z/ABM Point meas,TCoil on CH1013/z (axial) at max z/ABM Noise(x,y,z) (1x1x1): SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -42.6 dB A/m ABM1/ABM2 = 37.7 dB Location: -1, -5, 363.7 mm ABM1 comp = -4.96 dB A/m BWC Factor = 0.0105036 dB Location: -1, -5, 363.7 mm Z (axial) rough 50x50 scan: Z (axial) 16x16scan: 0 dB = 1.00A/m 0 dB = 1.00A/m HAC T-Coil Plots Page 1 of 18 Model: SCP-2700

FCC ID: V65SCP-27H X RADIAL MEASUREMENT: CDMA 800 Channel 1013 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 12/11/2008 Communication System: CDMA; Frequency: 824.7 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH1013/x (longitudinal) 24 x 16/ABM Point meas,TCoil on CH1013/x (longitudinal) at Interpolated Signal(x,y,z) (61x41x1): max x/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -12.6 dB A/m ABM1 comp = -14.9 dB A/m BWC Factor = 0.0105903 dB BWC Factor = 0.0105036 dB Location: -7.8, -5.4, 363.7 mm Location: 11, -9, 363.7 mm Point meas,TCoil on CH1013/x (longitudinal) at Point meas,TCoil on CH1013/x (longitudinal) at max x/ABM Noise(x,y,z) (1x1x1): max x/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -50.9 dB A/m ABM1/ABM2 = 36.0 dB Location: 11, -9, 363.7 mm ABM1 comp = -14.9 dB A/m BWC Factor = 0.0105036 dB X (Radial) 24x16 scan: 0 dB = 1.00A/m HAC T-Coil Plots Page 2 of 18 Model: SCP-2700

FCC ID: V65SCP-27H Y RADIAL MEASUREMENT: CDMA 800 Channel 1013 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 12/11/2008 Communication System: CDMA; Frequency: 824.7 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH1013/y (transversal) 16 x 24/ABM Point meas,TCoil on CH1013/y (transversal) at max Interpolated Signal(x,y,z) (41x61x1): y/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -13.2 dB A/m ABM1 comp = -15.8 dB A/m BWC Factor = 0.0105903 dB BWC Factor = 0.0105036 dB Location: 0.6, -13, 363.7 mm Location: -5, 7, 363.7 mm Point meas,TCoil on CH1013/y (transversal) at max Point meas,TCoil on CH1013/y (transversal) at max y/ABM Noise(x,y,z) (1x1x1): y/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -57.3 dB A/m ABM1/ABM2 = 41.5 dB Location: -5, 7, 363.7 mm ABM1 comp = -15.8 dB A/m BWC Factor = 0.0105036 dB Location: -5, 7, 363.7 mm Y (Radial) 16x24 scan: 0 dB = 1.00A/m HAC T-Coil Plots Page 3 of 18 Model: SCP-2700

FCC ID: V65SCP-27H Z (AXIAL) MEASUREMENT: CDMA 800 Channel 383 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 12/11/2008 008 Communication System: CDMA; Frequency: 836.49 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH383/z (axial) rough 50 x 50/ABM Interpolated Signal(x,y,z) (51x51x1): Measurement grid: dx=10mm, dy=10mm Cursor: ABM1 = -6.11 dB A/m BWC Factor = 0.0106771 dB Location: 1, -5, 363.7 mm Scans CH383/z (axial) 16 x 16/ABM Interpolated Point meas,TCoil on CH383/z (axial) at max z/ABM Signal(x,y,z) (41x41x1): Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -5.79 dB A/m ABM1 comp = -5.65 dB A/m BWC Factor = 0.0106771 dB BWC Factor = 0.0105036 dB Location: -0.2, -9, 363.7 mm Location: -1, -9, 363.7 mm Point meas,TCoil on CH383/z (axial) at max z/ABM Point meas,TCoil on CH383/z (axial) at max z/ABM Noise(x,y,z) (1x1x1): SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -43.5 dB A/m ABM1/ABM2 = 37.8 dB Location: -1, -9, 363.7 mm ABM1 comp = -5.65 dB A/m BWC Factor = 0.0105036 dB Location: -1, -9, 363.7 mm Z (axial) rough 50x50 scan: Z (axial) 16x16scan: 0 dB = 1.00A/m 0 dB = 1.00A/m HAC T-Coil Plots Page 4 of 18 Model: SCP-2700

FCC ID: V65SCP-27H X RADIAL MEASUREMENT: CDMA 800 Channel 383 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 12/11/2008 008 Communication System: CDMA; Frequency: 836.49 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH383/x (longitudinal) 24 x 16/ABM Point meas,TCoil on CH383/x (longitudinal) at max Interpolated Signal(x,y,z) (61x41x1): x/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -12.6 dB A/m ABM1 comp = -12.8 dB A/m BWC Factor = 0.0106771 dB BWC Factor = 0.0105036 dB Location: -9.4, -9, 363.7 mm Location: -9, -9, 363.7 mm Point meas,TCoil on CH383/x (longitudinal) at max Point meas,TCoil on CH383/x (longitudinal) at max x/ABM Noise(x,y,z) (1x1x1): x/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -46.4 dB A/m ABM1/ABM2 = 33.6 dB Location: -9, -9, 363.7 mm ABM1 comp = -12.8 dB A/m BWC Factor = 0.0105036 dB Location: -9, -9, 363.7 mm X (Radial) 24x16 scan: 0 dB = 1.00A/m HAC T-Coil Plots Page 5 of 18 Model: SCP-2700

FCC ID: V65SCP-27H Y RADIAL MEASUREMENT: CDMA 800 Channel 383 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 12/11/2008 008 Communication System: CDMA; Frequency: 836.49 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH383/y (transversal) 16 x 24/ABM Point meas,TCoil on CH383/y (transversal) at max Interpolated Signal(x,y,z) (41x61x1): y/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -12.6 dB A/m ABM1 comp = -14.8 dB A/m BWC Factor = 0.0106771 dB BWC Factor = 0.0105036 dB Location: 3, -13.8, 363.7 mm Location: -5, 3, 363.7 mm Point meas,TCoil on CH383/y (transversal) at max Point meas,TCoil on CH383/y (transversal) at max y/ABM Noise(x,y,z) (1x1x1): y/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -55.6 dB A/m ABM1/ABM2 = 40.8 dB Location: -5, 3, 363.7 mm ABM1 comp = -14.8 dB A/m BWC Factor = 0.0105036 dB Location: -5, 3, 363.7 mm Y (Radial) 16x24 scan: 0 dB = 1.00A/m HAC T-Coil Plots Page 6 of 18 Model: SCP-2700

FCC ID: V65SCP-27H Z (AXIAL) MEASUREMENT: CDMA 800 Channel 777 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 12/11/2008 Communication System: CDMA; Frequency: 848.31 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH777/z (axial) rough 50 x 50/ABM Interpolated Signal(x,y,z) (51x51x1): Measurement grid: dx=10mm, dy=10mm Cursor: ABM1 = -6.39 dB A/m BWC Factor = 0.0109373 dB Location: 3, -5, 363.7 mm Scans CH777/z (axial) 16 x 16/ABM Interpolated Point meas,TCoil on CH777/z (axial) at max z/ABM Signal(x,y,z) (41x41x1): Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -4.97 dB A/m ABM1 comp = -4.99 dB A/m BWC Factor = 0.0109373 dB BWC Factor = 0.0103301 dB Location: -0.6, -5, 363.7 mm Location: -1, -5, 363.7 mm Point meas,TCoil on CH777/z (axial) at max z/ABM Point meas,TCoil on CH777/z (axial) at max z/ABM Noise(x,y,z) (1x1x1): SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -42.1 dB A/m ABM1/ABM2 = 37.1 dB Location: -1, -5, 363.7 mm ABM1 comp = -4.99 dB A/m BWC Factor = 0.0103301 dB Location: -1, -5, 363.7 mm Z (axial) rough 50x50 scan: Z (axial) 16x16scan: 0 dB = 1.00A/m 0 dB = 1.00A/m HAC T-Coil Plots Page 7 of 18 Model: SCP-2700

FCC ID: V65SCP-27H X RADIAL MEASUREMENT: CDMA 800 Channel 777 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 12/11/2008 Communication System: CDMA; Frequency: 848.31 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH777/x (longitudinal) 24 x 16/ABM Point meas,TCoil on CH777/x (longitudinal) at max Interpolated Signal(x,y,z) (61x41x1): x/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -12.1 dB A/m ABM1 comp = -14.5 dB A/m BWC Factor = 0.0109373 dB BWC Factor = 0.0103301 dB Location: -9.4, -5, 363.7 mm Location: 11, -9, 363.7 mm Point meas,TCoil on CH777/x (longitudinal) at max Point meas,TCoil on CH777/x (longitudinal) at max x/ABM Noise(x,y,z) (1x1x1): x/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -50.6 dB A/m ABM1/ABM2 = 36.1 dB Location: 11, -9, 363.7 mm ABM1 comp = -14.5 dB A/m BWC Factor = 0.0103301 dB Location: 11, -9, 363.7 mm X (Radial) 24x16 scan: 0 dB = 1.00A/m HAC T-Coil Plots Page 8 of 18 Model: SCP-2700

FCC ID: V65SCP-27H Y RADIAL MEASUREMENT: CDMA 800 Channel 777 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 012/11/2008 Communication System: CDMA; Frequency: 848.31 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH777/y (transversal) 16 x 24/ABM Point meas,TCoil on CH777/y (transversal) at max Interpolated Signal(x,y,z) (41x61x1): y/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -13.3 dB A/m ABM1 comp = -14.8 dB A/m BWC Factor = 0.0109373 dB BWC Factor = 0.0105036 dB Location: -0.2, -13, 363.7 mm Location: -5, 3, 363.7 mm Point meas,TCoil on CH777/y (transversal) at max Point meas,TCoil on CH777/y (transversal) at max y/ABM Noise(x,y,z) (1x1x1): y/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -55.6 dB A/m ABM1/ABM2 = 40.8 dB Location: -5, 3, 363.7 mm ABM1 comp = -14.8 dB A/m BWC Factor = 0.0105036 dB Location: -5, 3, 363.7 mm Y (Radial) 16x24 scan: 0 dB = 1.00A/m HAC T-Coil Plots Page 9 of 18 Model: SCP-2700

FCC ID: V65SCP-27H Z (AXIAL) MEASUREMENT: CDMA 1900 Channel 25 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 12/14/2008 Communication System: CDMA; Frequency: 1850 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH25/z (axial) rough 50 x 50/ABM Interpolated Signal(x,y,z) (51x51x1): Measurement grid: dx=10mm, dy=10mm Cursor: ABM1 = -6.44 dB A/m BWC Factor = 0.0163141 dB Location: -3, -5, 363.7 mm Scans CH25/z (axial) 16 x 16/ABM Interpolated Point meas,TCoil on CH25/z (axial) at max z/ABM Signal(x,y,z) (41x41x1): Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -4.25 dB A/m ABM1 comp = -4.11 dB A/m BWC Factor = 0.0163141 dB BWC Factor = 0.0155338 dB Location: 3, -5, 363.7 mm Location: -1, -5, 363.7 mm Point meas,TCoil on CH25/z (axial) at max z/ABM Point meas,TCoil on CH25/z (axial) at max z/ABM Noise(x,y,z) (1x1x1): SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -40.6 dB A/m ABM1/ABM2 = 36.5 dB Location: -1, -5, 363.7 mm ABM1 comp = -4.11 dB A/m BWC Factor = 0.0155338 dB Location: -1, -5, 363.7 mm Z (axial) rough 50x50 scan: Z (axial) 16x16scan: 0 dB = 1.00A/m 0 dB = 1.00A/m HAC T-Coil Plots Page 10 of 18 Model: SCP-2700

FCC ID: V65SCP-27H X RADIAL MEASUREMENT: CDMA 1900 Channel 25 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 12/14/2008 Communication System: CDMA; Frequency: 1850 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH25/x (longitudinal) 24 x 16/ABM Point meas,TCoil on CH25/x (longitudinal) at max Interpolated Signal(x,y,z) (61x41x1): x/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -13.0 dB A/m ABM1 comp = -13.8 dB A/m BWC Factor = 0.0163141 dB BWC Factor = 0.0155338 dB Location: 7.4, -5, 363.7 mm Location: 7, -9, 363.7 mm Point meas,TCoil on CH25/x (longitudinal) at max Point meas,TCoil on CH25/x (longitudinal) at max x/ABM Noise(x,y,z) (1x1x1): x/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -49.4 dB A/m ABM1/ABM2 = 35.6 dB Location: 7, -9, 363.7 mm ABM1 comp = -13.8 dB A/m BWC Factor = 0.0155338 dB Location: 7, -9, 363.7 mm X (Radial) 24x16 scan: 0 dB = 1.00A/m HAC T-Coil Plots Page 11 of 18 Model: SCP-2700

FCC ID: V65SCP-27H Y RADIAL MEASUREMENT: CDMA 1900 Channel 25 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 12/14/2008 Communication System: CDMA; Frequency: 1850 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH25/y (transversal) 16 x 24/ABM Point meas,TCoil on CH25/y (transversal) at max Interpolated Signal(x,y,z) (41x61x1): y/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -11.9 dB A/m ABM1 comp = -15.6 dB A/m BWC Factor = 0.0163141 dB BWC Factor = 0.0155338 dB Location: 1.4, -13, 363.7 mm Location: -5, 7, 363.7 mm Point meas,TCoil on CH25/y (transversal) at max Point meas,TCoil on CH25/y (transversal) at max y/ABM Noise(x,y,z) (1x1x1): y/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -56.9 dB A/m ABM1/ABM2 = 41.3 dB Location: -5, 7, 363.7 mm ABM1 comp = -15.6 dB A/m BWC Factor = 0.0155338 dB Location: -5, 7, 363.7 mm Y (Radial) 16x24 scan: 0 dB = 1.00A/m HAC T-Coil Plots Page 12 of 18 Model: SCP-2700

FCC ID: V65SCP-27H Z (AXIAL) MEASUREMENT: CDMA 1900 Channel 600 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 12/14/2008 Communication System: CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH600/z (axial) rough 50 x 50/ABM Interpolated Signal(x,y,z) (51x51x1): Measurement grid: dx=10mm, dy=10mm Cursor: ABM1 = -5.65 dB A/m BWC Factor = 0.0158807 dB Location: -1, -5, 363.7 mm Scans CH600/z (axial) 16 x 16/ABM Interpolated Point meas,TCoil on CH600/z (axial) at max z/ABM Signal(x,y,z) (41x41x1): Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -4.25 dB A/m ABM1 comp = -4.70 dB A/m BWC Factor = 0.0158807 dB BWC Factor = 0.0158807 dB Location: -0.2, -5.4, 363.7 mm Location: -1, -5, 363.7 mm Point meas,TCoil on CH600/z (axial) at max z/ABM Point meas,TCoil on CH600/z (axial) at max z/ABM Noise(x,y,z) (1x1x1): SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -41.8 dB A/m ABM1/ABM2 = 37.1 dB Location: -1, -5, 363.7 mm ABM1 comp = -4.70 dB A/m BWC Factor = 0.0158807 dB Location: -1, -5, 363.7 mm Z (axial) rough 50x50 scan: Z (axial) 16x16scan: 0 dB = 1.00A/m 0 dB = 1.00A/m HAC T-Coil Plots Page 13 of 18 Model: SCP-2700

FCC ID: V65SCP-27H X RADIAL MEASUREMENT: CDMA 1900 Channel 600 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 12/14/2008 Communication System: CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH600/x (longitudinal) 24 x 16/ABM Point meas,TCoil on CH600/x (longitudinal) at max Interpolated Signal(x,y,z) (61x41x1): x/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -13.3 dB A/m ABM1 comp = -14.0 dB A/m BWC Factor = 0.0158807 dB BWC Factor = 0.0158807 dB Location: 7.4, -5, 363.7 mm Location: -5, -9, 363.7 mm Point meas,TCoil on CH600/x (longitudinal) at max Point meas,TCoil on CH600/x (longitudinal) at max x/ABM Noise(x,y,z) (1x1x1): x/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -49.4 dB A/m ABM1/ABM2 = 35.4 dB Location: -5, -9, 363.7 mm ABM1 comp = -14.0 dB A/m BWC Factor = 0.0158807 dB Location: -5, -9, 363.7 mm X (Radial) 24x16 scan: 0 dB = 1.00A/m HAC T-Coil Plots Page 14 of 18 Model: SCP-2700

FCC ID: V65SCP-27H Y RADIAL MEASUREMENT: CDMA 1900 Channel 600 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 12/14/2008 Communication System: CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH600/y (transversal) 16 x 24/ABM Point meas,TCoil on CH600/y (transversal) at max Interpolated Signal(x,y,z) (41x61x1): y/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -12.5 dB A/m ABM1 comp = -15.1 dB A/m BWC Factor = 0.0158807 dB BWC Factor = 0.0158807 dB Location: 2.2, -13, 363.7 mm Location: -5, 7, 363.7 mm Point meas,TCoil on CH600/y (transversal) at max Point meas,TCoil on CH600/y (transversal) at max y/ABM Noise(x,y,z) (1x1x1): y/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -56.8 dB A/m ABM1/ABM2 = 41.7 dB Location: -5, 7, 363.7 mm ABM1 comp = -15.1 dB A/m BWC Factor = 0.0158807 dB Location: -5, 7, 363.7 mm Y (Radial) 16x24 scan: 0 dB = 1.00A/m HAC T-Coil Plots Page 15 of 18 Model: SCP-2700

FCC ID: V65SCP-27H Z (AXIAL) MEASUREMENT: CDMA 1900 Channel 1175 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 12/14/2008 Communication System: CDMA; Frequency: 1910 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH1175/z (axial) rough 50 x 50/ABM Interpolated Signal(x,y,z) (51x51x1): Measurement grid: dx=10mm, dy=10mm Cursor: ABM1 = -5.52 dB A/m BWC Factor = 0.0159674 dB Location: 0, -5, 363.7 mm Scans CH1175/z (axial) 16 x 16/ABM Interpolated Point meas,TCoil on CH1175/z (axial) at max z/ABM Signal(x,y,z) (41x41x1): Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -2.91 dB A/m ABM1 comp = -3.50 dB A/m BWC Factor = 0.0159674 dB BWC Factor = 0.0148402 dB Location: -0.6, -5, 363.7 mm Location: -1, -5, 363.7 mm Point meas,TCoil on CH1175/z (axial) at max z/ABM Point meas,TCoil on CH1175/z (axial) at max z/ABM Noise(x,y,z) (1x1x1): SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -40.9 dB A/m ABM1/ABM2 = 37.4 dB Location: -1, -5, 363.7 mm ABM1 comp = -3.50 dB A/m BWC Factor = 0.0148402 dB Location: -1, -5, 363.7 mm Z (axial) rough 50x50 scan: Z (axial) 16x16scan: 0 dB = 1.00A/m 0 dB = 1.00A/m HAC T-Coil Plots Page 16 of 18 Model: SCP-2700

FCC ID: V65SCP-27H X RADIAL MEASUREMENT: CDMA 1900 Channel 1175 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 12/14/2008 Communication System: CDMA; Frequency: 1910 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH1175/x (longitudinal) 24 x 16/ABM Point meas,TCoil on CH1175/x (longitudinal) at Interpolated Signal(x,y,z) (61x41x1): max x/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -11.5 dB A/m ABM1 comp = -16.3 dB A/m BWC Factor = 0.0159674 dB BWC Factor = 0.0148402 dB Location: -9, -5, 363.7 mm Location: 11, -9, 363.7 mm Point meas,TCoil on CH1175/x (longitudinal) at Point meas,TCoil on CH1175/x (longitudinal) at max x/ABM Noise(x,y,z) (1x1x1): max x/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -49.2 dB A/m ABM1/ABM2 = 32.9 dB Location: 11, -9, 363.7 mm ABM1 comp = -16.3 dB A/m BWC Factor = 0.0148402 dB Location: 11, -9, 363.7 mm X (Radial) 24x16 scan: 0 dB = 1.00A/m HAC T-Coil Plots Page 17 of 18 Model: SCP-2700

FCC ID: V65SCP-27H Y RADIAL MEASUREMENT: CDMA 1900 Channel 1175 Equipment Setting: DUT: SCP-2700; Type: Cellular Phone ; Serial Number: 0450; Date: 12/14/2008 Communication System: CDMA; Frequency: 1910 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH1175/y (transversal) 16 x 24/ABM Point meas,TCoil on CH1175/y (transversal) at max Interpolated Signal(x,y,z) (41x61x1): y/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -12.1 dB A/m ABM1 comp = -15.9 dB A/m BWC Factor = 0.0159674 dB BWC Factor = 0.0148402 dB Location: -1.4, -12.6, 363.7 mm Location: -1, 7, 363.7 mm Point meas,TCoil on CH1175/y (transversal) at max Point meas,TCoil on CH1175/y (transversal) at max y/ABM Noise(x,y,z) (1x1x1): y/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -54.6 dB A/m ABM1/ABM2 = 38.8 dB Location: -1, 7, 363.7 mm ABM1 comp = -15.9 dB A/m BWC Factor = 0.0148402 dB Location: -1, 7, 363.7 mm Y (Radial) 16x24 scan: 0 dB = 1.00A/m HAC T-Coil Plots Page 18 of 18 Model: SCP-2700


Document Created: 2008-12-19 16:09:36
Document Modified: 2008-12-19 16:09:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC