SAR plots head

FCC ID: V65S1360

RF Exposure Info

Download: PDF
FCCID_2006275

Applicant: Kyocera FCC ID: V65S1360 Report #: CT- S1360-9B1-0513 EXHIBIT 9 Appendix B1: SAR DISTRIBUTION PLOTS (HEAD) PCS © 2013 Comptest Services LLC Page 1 of 11 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65S1360 Report #: CT- S1360-9B1-0513 Test Laboratory: Comptest/Kyocera Date: 04/30/2013 FCC S1360 CDMA-1900 Left, Ch. 25, Left Cheek Communication System: CDMA-1900, Frequency: 1851.25 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.46 mho/m; εr = 38.8; ρ = 1000 3 kg/m Phantom: SAM_4,Phantom section: Left Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(5.04, 5.04, 5.04), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-1900_Ch25 LC/Area Scan (91x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.860 mW/g CDMA-1900_Ch25 LC/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.95 V/m; Power Drift = -0.196 dB Peak SAR (extrapolated) = 1.28 W/kg SAR(1 g) = 0.818 mW/g; SAR(10 g) = 0.482 mW/g Maximum value of SAR (measured) = 0.897 mW/g CDMA-1900_Ch25 LC/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.95 V/m; Power Drift = -0.196 dB Peak SAR (extrapolated) = 1.22 W/kg SAR(1 g) = 0.764 mW/g; SAR(10 g) = 0.432 mW/g Maximum value of SAR (measured) = 0.856 mW/g 0 dB = 0.860mW/g © 2013 Comptest Services LLC Page 2 of 11 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65S1360 Report #: CT- S1360-9B1-0513 Test Laboratory: Comptest/Kyocera Date: 04/30/2013 FCC S1360 CDMA-1900 Left, Ch. 600, Left Cheek Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: HSL1900,Medium parameters used: f = 1880 MHz; σ = 1.46 mho/m; εr = 38.8; ρ = 1000 kg/m Phantom: SAM_4,Phantom section: Left Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(5.04, 5.04, 5.04), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-1900_CH600 LC/Area Scan (91x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.854 mW/g CDMA-1900_CH600 LC/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.47 V/m; Power Drift = 0.075 dB Peak SAR (extrapolated) = 1.31 W/kg SAR(1 g) = 0.813 mW/g; SAR(10 g) = 0.469 mW/g Maximum value of SAR (measured) = 0.891 mW/g CDMA-1900_CH600 LC/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.47 V/m; Power Drift = 0.075 dB Peak SAR (extrapolated) = 1.24 W/kg SAR(1 g) = 0.698 mW/g; SAR(10 g) = 0.401 mW/g Maximum value of SAR (measured) = 0.859 mW/g 0 dB = 0.860mW/g © 2013 Comptest Services LLC Page 3 of 11 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x,y,z,f0) SAR; Z Scan:Value Along Z, X=0, Y=0 ooo 1.0 0.9 0.8 au—oaioro— 0.7 |—*+—~| ow mWi/g o in m5mm=mommfomfamoooos wes n vencaper h ns wever n rurnene eneane s =

Applicant: Kyocera FCC ID: V65S1360 Report #: CT- S1360-9B1-0513 Test Laboratory: Comptest/Kyocera Date: 04/30/2013 FCC S1360 CDMA-1900 Left, Ch. 1175, Left Cheek Communication System: CDMA-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.46 mho/m; ε r = 38.8; ρ = 1000 3 kg/m Phantom: SAM_4,Phantom section: Left Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(5.04, 5.04, 5.04), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-1900_Ch 1175 LC/Area Scan (91x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.720 mW/g CDMA-1900_Ch 1175 LC/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.15 V/m; Power Drift = -0.156 dB Peak SAR (extrapolated) = 1.12 W/kg SAR(1 g) = 0.685 mW/g; SAR(10 g) = 0.399 mW/g Maximum value of SAR (measured) = 0.744 mW/g 0 dB = 0.720mW/g © 2013 Comptest Services LLC Page 5 of 11 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65S1360 Report #: CT- S1360-9B1-0513 Test Laboratory: Comptest/Kyocera Date: 04/30/2013 FCC S1360 CDMA-1900 Left, Ch. 600, Left Tilt Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: HSL1900,Medium parameters used: f = 1880 MHz; σ = 1.46 mho/m; εr = 38.8; ρ = 1000 kg/m Phantom: SAM_4,Phantom section: Left Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(5.04, 5.04, 5.04), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-1900_CH600 LT/Area Scan (91x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.400 mW/g CDMA-1900_CH600 LT/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.0 V/m; Power Drift = 0.155 dB Peak SAR (extrapolated) = 0.560 W/kg SAR(1 g) = 0.357 mW/g; SAR(10 g) = 0.216 mW/g Maximum value of SAR (measured) = 0.385 mW/g 0 dB = 0.400mW/g © 2013 Comptest Services LLC Page 6 of 11 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65S1360 Report #: CT- S1360-9B1-0513 Test Laboratory: Comptest/Kyocera Date: 04/30/2013 FCC S1360 CDMA-1900 Right, Ch. 25, Right Cheek Communication System: CDMA-1900, Frequency: 1851.25 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.46 mho/m; ε r = 38.8; ρ = 1000 3 kg/m Phantom: SAM_4,Phantom section: Right Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(5.17, 5.17, 5.17), Calibrated: 9/13/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-1900 Ch25 RC/Area Scan (91x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.07 mW/g CDMA-1900 Ch25 RC/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.7 V/m; Power Drift = 0.069 dB Peak SAR (extrapolated) = 1.61 W/kg SAR(1 g) = 1.02 mW/g; SAR(10 g) = 0.561 mW/g Maximum value of SAR (measured) = 1.17 mW/g CDMA-1900 Ch25 RC/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.7 V/m; Power Drift = 0.069 dB Peak SAR (extrapolated) = 1.37 W/kg SAR(1 g) = 0.862 mW/g; SAR(10 g) = 0.467 mW/g Maximum value of SAR (measured) = 0.983 mW/g 0 dB = 1.07mW/g © 2013 Comptest Services LLC Page 7 of 11 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65S1360 Report #: CT- S1360-9B1-0513 Test Laboratory: Comptest/Kyocera Date: 04/30/2013 FCC S1360 CDMA-1900 Right, Ch. 600, Right Cheek Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: HSL1900,Medium parameters used: f = 1880 MHz; σ = 1.46 mho/m; εr = 38.8; ρ = 1000 kg/m Phantom: SAM_4,Phantom section: Right Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(5.17, 5.17, 5.17), Calibrated: 9/13/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 1 deg C, Liquid T = 22.0 CDMA-1900 Ch600 RC/Area Scan (91x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.32 mW/g CDMA-1900 Ch600 RC/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.6 V/m; Power Drift = -0.067 dB Peak SAR (extrapolated) = 1.92 W/kg SAR(1 g) = 1.16 mW/g; SAR(10 g) = 0.620 mW/g Maximum value of SAR (measured) = 1.31 mW/g 0 dB = 1.32mW/g © 2013 Comptest Services LLC Page 8 of 11 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65S1360 Report #: CT- S1360-9B1-0513 © 2013 Comptest Services LLC Page 9 of 11 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65S1360 Report #: CT- S1360-9B1-0513 Test Laboratory: Comptest/Kyocera Date: 04/30/2013 FCC S1360 CDMA-1900 Right, Ch. 1175, Right Cheek Communication System: CDMA-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.46 mho/m; ε r = 38.8; ρ = 1000 3 kg/m Phantom: SAM_4,Phantom section: Right Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(5.17, 5.17, 5.17), Calibrated: 9/13/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C CDMA-1900 Ch1175 RC/Area Scan (91x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.917 mW/g CDMA-1900 Ch1175 RC/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.8 V/m; Power Drift = -0.042 dB Peak SAR (extrapolated) = 1.65 W/kg SAR(1 g) = 0.984 mW/g; SAR(10 g) = 0.518 mW/g Maximum value of SAR (measured) = 1.10 mW/g CDMA-1900 Ch1175 RC/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.8 V/m; Power Drift = -0.042 dB Peak SAR (extrapolated) = 1.39 W/kg SAR(1 g) = 0.790 mW/g; SAR(10 g) = 0.423 mW/g Maximum value of SAR (measured) = 1.03 mW/g 0 dB = 0.917mW/g © 2013 Comptest Services LLC Page 10 of 11 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65S1360 Report #: CT- S1360-9B1-0513 Test Laboratory: Comptest/Kyocera Date: 04/30/2013 FCC S1360 CDMA-1900 Right, Ch. 600, Right Tilt Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: HSL1900,Medium parameters used: f = 1880 MHz; σ = 1.46 mho/m; εr = 38.8; ρ = 1000 kg/m Phantom: SAM_4,Phantom section: Right Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(5.17, 5.17, 5.17), Calibrated: 9/13/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C CDMA-1900 Ch600 RT/Area Scan (91x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.343 mW/g CDMA-1900 Ch600 RT/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.5 V/m; Power Drift = -0.023 dB Peak SAR (extrapolated) = 0.408 W/kg SAR(1 g) = 0.301 mW/g; SAR(10 g) = 0.195 mW/g Maximum value of SAR (measured) = 0.328 mW/g 0 dB = 0.343mW/g © 2013 Comptest Services LLC Page 11 of 11 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


Document Created: 2013-06-21 13:43:55
Document Modified: 2013-06-21 13:43:55
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC