SAR Validation

FCC ID: V65S1360

RF Exposure Info

Download: PDF
FCCID_2006274

Applicant: Kyocera FCC ID: V65S1360 Report #: CT- S1360-9A-0513 EXHIBIT 9 APPENDIX A: SAR VALIDATION PLOTS Validation for HEAD © 2013 Comptest Services LLC Page 1 of 6 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65S1360 Report #: CT- S1360-9A-0513 Test Laboratory: Comptest/Kyocera Date: 04/30/2013 1900Mhz Validation @ 20dBm Probe 1618, DAE 530 and Dipole 5d016 Communication System: CW, Frequency: 1900 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used (interpolated): f = 1900 MHz; σ = 1.46 mho/m; ε r = 38.8; ρ = 1000 3 kg/m Phantom: SAM_4,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(5.17, 5.17, 5.17), Calibrated: 9/13/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 1900MHz Validation @20dBm/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 4.99 mW/g 1900MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 56.9 V/m; Power Drift = -0.044 dB Peak SAR (extrapolated) = 6.46 W/kg SAR(1 g) = 3.94 mW/g; SAR(10 g) = 2.11 mW/g Maximum value of SAR (measured) = 4.41 mW/g 0 dB = 4.99mW/g © 2013 Comptest Services LLC Page 2 of 6 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65S1360 Report #: CT- S1360-9A-0513 © 2013 Comptest Services LLC Page 3 of 6 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65S1360 Report #: CT- S1360-9A-0513 Validation for BODY © 2013 Comptest Services LLC Page 4 of 6 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65S1360 Report #: CT- S1360-9A-0513 Test Laboratory: Comptest/Kyocera Date: 05/01/2013 1900Mhz Validation (Muscle) @ 20dBm Probe 3036, DAE 603 and Dipole 5d016 Communication System: CW, Frequency: 1900 MHz, Duty Cycle: 1:1 3 Medium: M1900,Medium parameters used (interpolated): f = 1900 MHz; σ = 1.55 mho/m; εr = 51.6; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.47, 4.47, 4.47), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C 1900MHz Validation @20dBm/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 5.29 mW/g 1900MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 51.1 V/m; Power Drift = -0.017 dB Peak SAR (extrapolated) = 7.72 W/kg SAR(1 g) = 4.26 mW/g; SAR(10 g) = 2.23 mW/g Maximum value of SAR (measured) = 4.80 mW/g 0 dB = 5.29mW/g © 2013 Comptest Services LLC Page 5 of 6 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x,y,z,f0) SAR; Z Scan:Value Along Z, X=0, Y=0 5.0 ETT 4.5 ,_W"'M PPPEEJ 4.0 eP 3.5 n en mWi/g DJ in / Em Oe 2.0 \ 1.5 \ 1.0 Looo 0.5 \ 1 L__L _ 1__1__| 1__L__| L__L__ 1__L__| L__L _ L__L _ L__ _ —0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 m [' "lbrie epecerepreabrodaiebuepertrtete erreefur me nump rrairtarswire ereiibors perreuin on e urriper ven evrreve en _ 1


Document Created: 2013-06-21 13:42:40
Document Modified: 2013-06-21 13:42:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC