HAC TCoil plots

FCC ID: V65S1360

Test Report

Download: PDF
FCCID_2006272

Applicant Kyocera FCC ID:: V65S1360 Report #: CT-S1360-13C-0513-R0 EXHIBIT 13 APPENDIX C: T-COIL DATA PLOT PCS © 2012 Comptest Services LLC Page 1 of 10 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65S1360 Report #: CT-S1360-13C-0513-R0 Test Laboratory: COMPTEST/KYOCERA Date: 05/03/2013 FCC_ S1360_TCoil_PCS_Ch. 25 z(axial) Communication System: CDMA-1900, Frequency: 1851.25 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_25/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 56.5 dB ABM1 comp = 2.88 dB A/m BWC Factor = 0.155041 dB Location: 0.8, -3.8, 3.7 mm General Scans_25/z (axial) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 54.8 dB ABM1 comp = 1.99 dB A/m BWC Factor = 0.155041 dB Location: 4, -0.2, 3.7 mm 0 dB = 668.5 © 2012 Comptest Services LLC Page 2 of 10 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65S1360 Report #: CT-S1360-13C-0513-R0 Test Laboratory: COMPTEST/KYOCERA Date: 05/03/2013 FCC_ S1360_TCoil_PCS_ Ch. 25 x(longitudinal) Communication System: CDMA-1900, Frequency: 1851.25 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_25/x (longitudinal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 50.0 dB ABM1 comp = -6.51 dB A/m BWC Factor = 0.155041 dB Location: -6.7, 0, 3.7 mm General Scans_25/x (longitudinal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 52.2 dB ABM1 comp = -4.89 dB A/m BWC Factor = 0.155041 dB Location: -8.3, -1, 3.7 mm 0 dB = 317.3 © 2012 Comptest Services LLC Page 3 of 10 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65S1360 Report #: CT-S1360-13C-0513-R0 Test Laboratory: COMPTEST/KYOCERA Date: 05/03/2013 FCC_ S1360_TCoil_PCS_ Ch. 25 y(transversal) Communication System: CDMA-1900, Frequency: 1851.25 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_25/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Measure Window Length: 1000ms BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 50.4 dB ABM1 comp = -7.59 dB A/m BWC Factor = 0.155041 dB Location: 4.2, 12.1, 3.7 mm General Scans_25/y (transversal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 50.0 dB ABM1 comp = -8.00 dB A/m BWC Factor = 0.155041 dB Location: 2.2, 8.5, 3.7 mm 0 dB = 330.7 © 2012 Comptest Services LLC Page 4 of 10 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65S1360 Report #: CT-S1360-13C-0513-R0 Test Laboratory: COMPTEST/KYOCERA Date: 05/03/2013 FCC_ S1360_TCoil_PCS Ch. 600 z(axial) Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_600/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 53.2 dB ABM1 comp = -0.232 dB A/m BWC Factor = 0.155979 dB Location: 1.7, -4.2, 3.7 mm General Scans_600/z (axial) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 55.1 dB ABM1 comp = 2.18 dB A/m BWC Factor = 0.155979 dB Location: 4.2, 0.2, 3.7 mm 0 dB = 455.0 © 2012 Comptest Services LLC Page 5 of 10 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65S1360 Report #: CT-S1360-13C-0513-R0 Test Laboratory: COMPTEST/KYOCERA Date: 05/03/2013 FCC_ S1360_TCoil_PCS Ch. 600 x (longitudinal) Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_600/x (longitudinal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 49.6 dB ABM1 comp = -7.15 dB A/m BWC Factor = 0.155979 dB Location: -5.8, -3.8, 3.7 mm General Scans_600/x (longitudinal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 50.3 dB ABM1 comp = -6.15 dB A/m BWC Factor = 0.155979 dB Location: -4.4, -0.2, 3.7 mm 0 dB = 300.6 © 2012 Comptest Services LLC Page 6 of 10 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65S1360 Report #: CT-S1360-13C-0513-R0 Test Laboratory: COMPTEST/KYOCERA Date: 05/03/2013 FCC_ S1360_TCoil_PCS_ Ch. 600 y(transversal) Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_600/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 49.4 dB ABM1 comp = -8.20 dB A/m BWC Factor = 0.155979 dB Location: 7.1, -9.6, 3.7 mm General Scans_600/y (transversal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 50.2 dB ABM1 comp = -7.73 dB A/m BWC Factor = 0.155979 dB Location: 2.2, -10.3, 3.7 mm 0 dB = 296.3 © 2012 Comptest Services LLC Page 7 of 10 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65S1360 Report #: CT-S1360-13C-0513-R0 Test Laboratory: COMPTEST/KYOCERA Date: 05/03/2013 FCC_ S1360_TCoil_PCS_ Ch.1175 z(axial) Communication System: CDMA-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_1175/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 53.8 dB ABM1 comp = 1.63 dB A/m BWC Factor = 0.155041 dB Location: 4.2, -2.9, 3.7 mm General Scans_1175/z (axial) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 54.6 dB ABM1 comp = 1.71 dB A/m BWC Factor = 0.155041 dB Location: 2.2, -0.2, 3.7 mm 0 dB = 487.3 © 2012 Comptest Services LLC Page 8 of 10 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65S1360 Report #: CT-S1360-13C-0513-R0 Test Laboratory: COMPTEST/KYOCERA Date: 05/03/2013 FCC_ S1360_TCoil_PCS _Ch. 1175 x(longitudinal) Communication System: CDMA-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C General Scans_1175/x (longitudinal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 51.3 dB ABM1 comp = -4.98 dB A/m BWC Factor = 0.155041 dB Location: -5.8, -4.2, 3.7 mm General Scans_1175/x (longitudinal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 50.9 dB ABM1 comp = -4.98 dB A/m BWC Factor = 0.155041 dB Location: -6, -2.4, 3.7 mm 0 dB = 366.1 © 2012 Comptest Services LLC Page 9 of 10 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65S1360 Report #: CT-S1360-13C-0513-R0 Test Laboratory: COMPTEST/KYOCERA Date: 05/03/2013 FCC_ S1360_TCoil_PCS_ Ch. 1175 y(transversal) Communication System: CDMA-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C General Scans_1175/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 50.2 dB ABM1 comp = -7.75 dB A/m BWC Factor = 0.155041 dB Location: 0, 8.7, 3.7 mm General Scans_1175/y (transversal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 50.4 dB ABM1 comp = -7.39 dB A/m BWC Factor = 0.155041 dB Location: 2.2, 8.5, 3.7 mm 0 dB = 322.5 © 2012 Comptest Services LLC Page 10 of 10 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


Document Created: 2013-05-15 14:52:54
Document Modified: 2013-05-15 14:52:54
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC