Bluetooth Conducted Report

FCC ID: V65S1360

Test Report

Download: PDF
FCCID_2006001

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 RF Emissions Test Report FCC Part 15.247 For Kyocera Corporation c/o Kyocera Communication Inc. Product: CDMA Cellular Phone Model: S1360 © 2013 Comptest Services LLC Page 1 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 TABLE OF CONTENTS 1 SUMMARY OF TESTING ....................................................................................................... 4 1.1 Bluetooth EDR .................................................................................................................. 4 2 EQUIPMENT UNDER TEST INFORMATION.......................................................................... 5 3 TEST FACILITIES ................................................................................................................... 6 4 TEST SETUP .......................................................................................................................... 6 5 20 dB BANDWIDTH ................................................................................................................ 7 5.1 Test Configuration ............................................................................................................ 7 5.2 20dB Bandwidth Plots and Results ................................................................................... 7 6 CARRIER FREQUENCY SEPARATION ............................................................................... 11 6.1 Test Configuration .......................................................................................................... 11 6.2 Results: Carrier Frequency ............................................................................................. 11 7 NUMBER OF HOPPING FREQUENCIES ............................................................................. 12 7.1 Test Configuration .......................................................................................................... 12 7.2 Results: Number of Hopping Frequencies....................................................................... 12 8 TIME OF OCCUPANCY (DWELL TIME) ............................................................................... 14 8.1 Test Configuration .......................................................................................................... 14 8.2 Results: Dwell Time ........................................................................................................ 14 9 OUTPUT POWER ................................................................................................................. 16 9.1 Test Configuration .......................................................................................................... 16 9.2 Results and Limits: ......................................................................................................... 16 10 BANDEDGE .......................................................................................................................... 17 10.1 Test Configuration .......................................................................................................... 17 10.2 Results: Bandedge ......................................................................................................... 17 11 SPURIOUS RF CONDUCTED EMISSIONS ......................................................................... 24 11.1 Test Configuration .......................................................................................................... 24 11.2 Results: Conducted Spurious Emissions......................................................................... 24 12 AC POWER LINE CONDUCTED EMISSIONS...................................................................... 28 12.1 Test Configuration & Results .......................................................................................... 28 13 RADIATED EMISSIONS ....................................................................................................... 28 13.1 Test Configuration & Results .......................................................................................... 28 14 TEST EQUIPMENT ............................................................................................................... 28 © 2013 Comptest Services LLC Page 2 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 ATTESTATION The tested device complies with the requirements in respect of all parameters subject to the test. The test results and statements relate only to the items tested. The test equipment used was suitable for the tests performed and within manufacturer’s published specifications and operating parameters. The test methods were consistent with the methods described in the relevant standards. Product: CDMA Cellular Phone with Bluetooth Model #: S1360 FCC ID: V65S1360 Tested in accordance with: FCC Part 15.247 Test performed by: Comptest Services LLC Test Requested by: KYOCERA Corporation C/o KYOCERA Communication Inc 9520 Towne Centre Drive San Diego, CA 92121 Date of Test: May 10 – May 15, 2013 Responsible Engineer Reviewed and approved by: Benjamin Nguyen Kelly Hill Benjamin Nguyen Kelly Hill Test Engineer Quality Manager © 2013 Comptest Services LLC Page 3 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 1 SUMMARY OF TESTING 1.1 Bluetooth EDR Section # Rule Part (FCC / IC) Test Description Verdict 5 § 15.247(a)(1) / RSS-210 §A8.1 20 dB Bandwidth Pass 6 § 15.247(a)(1) / RSS-210 §A8.1(2) Carrier Frequency Separation Pass Number of Hopping 7 § 15.247(a)(1)(iii) / RSS-210 §A8.1 (4) Pass Frequencies 8 § 15.247(a)(1)(iii) / RSS-210 §A8.1 (4) Time of Occupancy Pass 9 § 15.247(b)(1) / RSS-210 §A8.4 Conducted Output Power Pass 10 § 15.247(d) / RSS-210 §A8.5 Band-edge Pass 11 § 15.247(d) / RSS-210 §A8.5 Spurious Conducted Emissions Pass 12 § 15.207 / RSS-Gen §A7.2.2 AC Line Conducted Emissions Pass 13 § 15.209 / RSS-210 §A8.5 Spurious Radiated Emissions Pass © 2013 Comptest Services LLC Page 4 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 2 EQUIPMENT UNDER TEST INFORMATION EUT Serial Number: 268435457816732379 Type: [ ] Prototype, [X] Pre-Production, [ ] Production Equipment Category: Portable Bluetooth version: 2.1 +EDR 3.0 + EDR 4.0 + LE Method: Frequency Hopping Spread Spectrum (FHSS) Adaptive Frequency Hopping (AFH) Modulation: BT EDR: GFSK; π/4-DQPSK; 8DPSK TX Frequency (MHz): 2402 to 2480 Channel Numbers: BT EDR: 79 (AFH:  20) Channel Spacing (MHz): BT EDR: 1 Max. Output Power (dBm): 1.88 Antenna: Internal Antenna Gain (dBi): -1.0 (Peak) Remarks:  The Bluetooth module is tested by a Bluetooth Qualification Test Facility and the manufacturer confirm that: o The hopping sequence is pseudorandom o All channels are used equally on average o The receiver input bandwidth equals the transmit bandwidth o The receiver hops in sequence with the transmit signal o Bluetooth Protocol is used and Medium Access Protocol is implemented The device employs Adaptive Frequency Hopping (AFH) which identifies sources of interference namely devices operating in 802.1 WLAN and excludes them from the list of available channels. The process of re-mapping reduces the number of test channels from 79 channels to a minimum number of 20 channels. © 2013 Comptest Services LLC Page 5 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 3 TEST FACILITIES The test sites and measurement facilities used to collect data are located at 8611 Balboa Avenue, San Diego, CA 92123, USA 4 TEST SETUP The Bluetooth RF output of the equipment under test (EUT) was connected to the input of the spectrum analyzer through a RF cable with a specialized RF connector. The amplitude of the spectrum analyzer is corrected for the cable insertion loss and any other applicable losses. A fully charged battery was used as power supply voltage. Spectrum Analyzer Tests were performed at the following channels: Bluetooth Mode: EDR Available Channel: 0 to 78 Tested Channel: 0, 39, 78 Tested Frequency (MHz): 2402, 2441, 2480 © 2013 Comptest Services LLC Page 6 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 5 20 dB BANDWIDTH 5.1 Test Configuration FCC: § 15.247(a)(1) IC: RSS-210 §A8.1 The Bluetooth transmitter was enabled at low, mid, high channels. The automatic bandwidth measurement capability of the spectrum analyzer was used to perform the 20dB-bandwidth measurement at each channel and at each supporting modulation scheme. Spectrum Analyzer Parameters: RBW = 30kHz, VBW = 300kHz, Span=3MHz, Sweep Time = Coupled, Detector=Peak, x dB=-20 Frequencies of Interest: Spectrum was investigated from 2402 MHz – 2480 MHz. Limits: < 1 MHz, unless more than 15 non-overlapping channels are employed. 5.2 20dB Bandwidth Plots and Results Figure Channel Modulation Results 5-1a GFSK 848 kHz 5-1b 0 EDR DQPSK 1.17 MHz 5-2c EDR D8PSK 1.16 MHz 5-2a GFSK 849 kHz 5-2b 39 EDR DQPSK 1.17 MHz 5-2c EDR D8PSK 1.16 MHz 5-3a GFSK 846 kHz 5-3b 78 EDR DQPSK 1.16 MHz 5-3c EDR D8PSK 1.16 MHz © 2013 Comptest Services LLC Page 7 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 Figure 5-1a: 20dB Bandwidth Basic rate, Channel 0. Figure 5-1b: 20dB Bandwidth EDR DQPSK, Channel 0. Figure 5-1c: 20dB Bandwidth EDR D8PSK, Channel 0. © 2013 Comptest Services LLC Page 8 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 Figure 5-2a: 20dB Bandwidth Basic rate, Channel 39. Figure 5-2b: 20dB Bandwidth EDR DQPSK, Channel 39. Figure 5-2c: 20dB Bandwidth EDR D8PSK, Channel 39. © 2013 Comptest Services LLC Page 9 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 Figure 5-3a: 20dB Bandwidth Basic rate, Channel 78. Figure 5-3b: 20dB Bandwidth EDR DQPSK, Channel 78. Figure 5-3c: 20dB Bandwidth EDR D8PSK, Channel 78. © 2013 Comptest Services LLC Page 10 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 6 CARRIER FREQUENCY SEPARATION 6.1 Test Configuration FCC: § 15.247(a)(1) IC: RSS-210 §A8.1(2) The Bluetooth transmitter was set in hopping mode to investigate the carrier frequency separation between mid-channel and its adjacent channels. The carrier frequency separation is independent of modulation and packet length (DH1, DH3, etc.). Limits: a)  25 kHz or 20 dB Bandwidth, whichever is greater b) For FH systems operating in 2400-2483.5MHz and with output power less than 125mW the carrier frequency separation should be greater than 25kHz or 2/3 of 20dB Bandwidth. 6.2 Results: Carrier Frequency Frequency Separation Limits Figure Measured 20dB BW (kHz) Result (kHz) (kHz) 6 1025 1170 780.0 Pass Note: EUT complies with the minimum channel separation requirement when in x/EDR mode using 79 channels and when operating in AFH mode using 20 channels. Figure 6: Carrier Frequency Separation between channels 38, 39 (mid-channel) & 40. © 2013 Comptest Services LLC Page 11 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 7 NUMBER OF HOPPING FREQUENCIES 7.1 Test Configuration FCC: § 15.247(a)(1)(iii) IC: RSS-210 §A8.1(4) The Bluetooth transmitter was set in hopping mode to investigate the number of hopping frequencies. Limits: At least 15 non-overlapping channels 7.2 Results: Number of Hopping Frequencies Figure Channel Plot Description Results 7a Number of Hopping Frequencies (Channels 0-39) 79 Hopping 7b Number of Hopping Frequencies (Channels 39-78) (Channels 0-78) Note: In AFH mode, the device operates using 20 channels so the requirement for minimum number of hopping channels is satisfied. © 2013 Comptest Services LLC Page 12 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 Figure 7a: Number of Hopping Frequencies (Channels 0-39). Figure 7b: Number of Hopping Frequencies (Channels 39-78). © 2013 Comptest Services LLC Page 13 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 8 TIME OF OCCUPANCY (DWELL TIME) 8.1 Test Configuration FCC: § 15.247(a)(1)(iii) IC: RSS-210 §A8.1(4) The Bluetooth transmitter was set in hopping mode to capture one of the transmissions. Dwell Time for any given channel is calculated as follows: Dwell Time = Time Slot Length x Hop Rate x 0.4sec For 1x/EDR mode the hopping rate is 1600 hops/sec for a single slot packet. The worst case hopping rate is 1600/X, where X is the total packet slot including transmit and receive slots in DH packet operation. For example, in DH5 packet there are 5 transmit and 1 receive slot, for a total of 6 slots, the worst case hopping rate is 1600/6= 266.67 hops/sec. For AFH mode the number of channels is reduced to a minimum of 20 channels and the channel hopping rate is reduced by 50%. For example, the worst case hopping rate is 800/6=133.3 hops/sec in DH5 packet with AFH. Below are actual the hop rate for different package operations: Hopping Rate (hops/sec) Mode DH1 DH3 DH5 EDR 800 400 266.7 EDR with AFH 400 200 133.3 Spectrum Analyzer Parameters: RBW = 3MHz, VBW  RBW, Span=0 Hz, Detector=Peak, Sweep time=sufficient enough to capture one transmission. Limits:  0.4 s (within a period of 0.4s x number of hopping channel employed) 8.2 Results: Dwell Time Measured Time Slot Hop Rate Dwell Time Mode Result (mS) (Hops/Sec) (mS) DH1 0.38 800 121.6 Pass DH3 1.64 400 262.4 Pass DH5 2.86 266.67 304.9 Pass DH5 (AFH) 2.86 133.3 152.4 Pass © 2013 Comptest Services LLC Page 14 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 Figure 8-1: Duration of one transmission DH1 (Channel 39). Figure 8-2: Duration of one transmission DH3 (Channel 39). Figure 8-3: Duration of one transmission DH5 (Channel 39). © 2013 Comptest Services LLC Page 15 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 9 OUTPUT POWER 9.1 Test Configuration FCC: § 15.247(b)(1) IC: RSS-210 §A8.4(2) The Bluetooth transmitter was enabled at low, mid and high channels of separately to investigate the peak output power for each channel. Spectrum Analyzer Parameters: RBW = 3MHz, VBW  RBW, Span=10MHz, Sweep Time = Coupled, Detector=Peak Frequencies of Interest: Spectrum was investigated from 2400 MHz – 2483.5 MHz. Limits: < 1 watt (30dBm) for systems using digital modulation 9.2 Results and Limits: Freq (MHz) Channel Modulation Results (dBm) Basic Rate 1.24 2402 0 DQPSK 1.77 D8PSK 1.28 Basic Rate 0.84 2441 39 EDR DQPSK 1.40 EDR D8PSK 0.88 Basic Rate 1.12 2480 78 EDR DQPSK 1.81 EDR D8PSK 1.21 Comments: Pass © 2013 Comptest Services LLC Page 16 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 10 BANDEDGE 10.1 Test Configuration FCC: § 15.247(d) IC: RSS-210 §A8.5 The Bluetooth RF output port of the EUT was directly connected to the input of the spectrum analyzer with sufficient attenuation. Subsequently, the low and high channels of Bluetooth transmitter were enabled separately to investigate the band-edge compliance of conducted emissions. To ensure the band-edge compliance when the channels are hopping, measurements were also conducted at low and high channels in this mode. A fully charged battery was used as supply voltage Spectrum Analyzer Parameters: RBW = 100kHz, VBW = 300kz, Span=10MHz, Sweep Time = Coupled, Detector=Peak, Trace=Max hold Frequencies of Interest: Spectrum was investigated from 2400 MHz – 2483.5 MHz. Limits:  -20 dBc In any 100kHz band, the highest radio frequency power outside the band (2400-2483.5 MHz) is measured to be at least 20 dB below the desired power of intentional radiator within the band. 10.2 Results: Bandedge Figure Channel/Edge Modulation Plot Description Results (dBc) 10-1a Hopping disabled -55.93 Basic Rate 10-1b Hopping enabled -51.66 10-2a Hopping disabled -51.62 0 -- Low Band Edge EDR DQPSK 10-2b Hopping enabled -51.15 10-3a Hopping disabled -51.92 EDR D8PSK 10-3b Hopping enabled -50.88 10-4a Hopping disabled -60.64 Basic Rate 10-4b Hopping enabled -59.95 10-5a Hopping disabled -59.55 78 -- High Band Edge EDR DQPSK 10-5b Hopping enabled -56.74 10-6a Hopping disabled -58.40 EDR D8PSK 10-6b Hopping enabled -57.91 © 2013 Comptest Services LLC Page 17 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 Figure 10-1a: Basic Rate Low band edge with hopping disabled. Figure 10-1b: Basic Rate Low band edge with hopping enabled. © 2013 Comptest Services LLC Page 18 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 Figure 10-2a: EDR DQPSK Low band edge with hopping disabled. Figure 10-2b: EDR DQPSK Low band edge with hopping enabled. © 2013 Comptest Services LLC Page 19 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 Figure 10-3a: EDR D8PSK Low band edge with hopping disabled. Figure 10-3b: EDR D8PSK Low band edge with hopping enabled. © 2013 Comptest Services LLC Page 20 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 Figure 10-4a: Basic Rate High band edge with hopping disabled. Figure 10-4b: Basic Rate High band edge with hopping enabled. © 2013 Comptest Services LLC Page 21 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 Figure 10-5a: EDR DQPSK High band edge with hopping disabled. Figure 10-5b: EDR DQPSK High band edge with hopping enabled. © 2013 Comptest Services LLC Page 22 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 Figure 10-6a: EDR D8PSK High band edge with hopping disabled. Figure 10-6b: EDR D8PSK High band edge with hopping enabled. © 2013 Comptest Services LLC Page 23 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 11 SPURIOUS RF CONDUCTED EMISSIONS 11.1 Test Configuration FCC: § 15.247(d) IC: RSS-210 §A8.5 The Bluetooth RF output port of the EUT was directly connected to the input of the spectrum analyzer with sufficient attenuation. Subsequently, the low, mid and high channels of Bluetooth transmitter were enabled separately and the frequency spectrum was investigated for any spurious emissions. A fully charged battery was used as supply voltage. Spectrum Analyzer Parameters: RBW=1MHz, VBW=1MHz, Span=300kHz, Sweep Time=coupled, Detector=Peak, Trace=Max hold Tests were performed with 1MHz RBW instead of 100kHz to increase the measurement speed. In case emissions are near the limit, the frequencies were investigated with a reduced RBW. Frequencies of Interest: Spectrum was investigated from 30MHz – 25 GHz. Limits: <-20 dBc 11.2 Results: Conducted Spurious Emissions Figure Channel Plot Description Results (dBc) 11-1a Conducted spurious emissions, 30MHz to 8GHz 0 -53.89 11-1b Conducted spurious emissions, 8GHz to 25GHz 11-2a Conducted spurious emissions, 30MHz to 8GHz 39 -54.01 11-2b Conducted spurious emissions, 8GHz to 25GHz 11-3a Conducted spurious emissions, 30MHz to 8GHz 78 -53.70 11-3b Conducted spurious emissions, 8GHz to 25GHz Comments: Spurious RF Conducted Emission testing was performed on the modulation that has the highest conducted power in comparison with the other modulation. © 2013 Comptest Services LLC Page 24 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 Figure 11-1a: Conducted Spurious Emissions (CH 0). Figure 11-1b: Conducted Spurious Emissions (CH 0). © 2013 Comptest Services LLC Page 25 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 Figure 11-2a: Conducted Spurious Emissions (CH 39). Figure 11-2b: Conducted Spurious Emissions (CH 39). © 2013 Comptest Services LLC Page 26 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 Figure 11-3a: Conducted Spurious Emissions (CH 78). Figure 11-3b: Conducted Spurious Emissions (CH 78). © 2013 Comptest Services LLC Page 27 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera COMPTEST FCC ID: V65S1360 Services LLC Report #: CT-S1360-15C-0513-R0 12 AC POWER LINE CONDUCTED EMISSIONS 12.1 Test Configuration & Results FCC: § 15.207 IC: RSS-Gen §A7.2.2 See separate report 13 RADIATED EMISSIONS 13.1 Test Configuration & Results FCC: § 15.209 IC: RSS-210 §A8.5 See separate report 14 TEST EQUIPMENT The test equipment utilized to perform the tests documented in this report has been calibrated in accordance with the manufacturer’s recommendations and is traceable to recognized national standards. Description Manufacturer Model No. Serial No. Cal Due Date Spectrum Analyzer Agilent E4440A MY44303130 12/11/13 © 2013 Comptest Services LLC Page 28 of 28 Bluetooth Report This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


Document Created: 2013-05-20 10:37:01
Document Modified: 2013-05-20 10:37:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC