sar plots

FCC ID: V65OASY1

RF Exposure Info

Download: PDF
FCCID_1594460

The Testcenter facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-01. Appendix for the Report Dosimetric Assessment of the Kyocera F42 (FCC ID: V65OASY1) According to the FCC Requirements SAR Distribution Plots November 24, 2011 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer KYOCERA Corporation 2-1-1 Kagahara, Tsuzuki-ku, 224-8502 Yokohama-shi Japan The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 1 of 19

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 2 of 19 Table of Contents 1 SAR DISTRIBUTION PLOTS, PCS 1900, HEAD ....................................................................................... 3 2 SAR DISTRIBUTION PLOTS, PCS/GPRS 1900, BODY........................................................................... 7 3 SAR DISTRIBUTION PLOTS, IEEE 802.11 B, BODY ............................................................................. 12 4 SAR Z-AXIS SCANS (VALIDATION) ......................................................................................................... 17 5 SAR Z-AXIS SCANS (MEASUREMENTS) ................................................................................................ 18

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 3 of 19 1 SAR Distribution Plots, PCS 1900, Head Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: F42_yplm_1.da4 DUT: Kyocera; Type: F42; Serial: 004401564900005 Program Name: PCS 1900 Communication System: PCS 1900; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 1880 MHz; σ = 1.4 mho/m; εr = 40.8; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.07, 8.07, 8.07); Calibrated: 26.09.2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 21.09.2011 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Cheek Left/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.509 mW/g Cheek Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.27 V/m; Power Drift = -0.028 dB Peak SAR (extrapolated) = 0.880 W/kg SAR(1 g) = 0.495 mW/g; SAR(10 g) = 0.286 mW/g Maximum value of SAR (measured) = 0.539 mW/g Fig. 1: SAR distribution for PCS 1900, channel 661, cheek position, left side of head (November 11, 2011; Ambient Temperature: 22.1° C; Liquid Temperature: 21.7° C).

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 4 of 19 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: F42_yplm_2.da4 DUT: Kyocera; Type: F42; Serial: 004401564900005 Program Name: PCS 1900 Communication System: PCS 1900; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 1880 MHz; σ = 1.4 mho/m; εr = 40.8; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.07, 8.07, 8.07); Calibrated: 26.09.2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 21.09.2011 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Tilted Left/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.341 mW/g Tilted Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.5 V/m; Power Drift = -0.025 dB Peak SAR (extrapolated) = 0.587 W/kg SAR(1 g) = 0.345 mW/g; SAR(10 g) = 0.197 mW/g Maximum value of SAR (measured) = 0.374 mW/g Fig. 2: SAR distribution for PCS 1900, channel 661, tilted position, left side of head (November 11, 2011; Ambient Temperature: 22.1° C; Liquid Temperature: 21.7° C).

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 5 of 19 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: F42_yprm_1.da4 DUT: Kyocera; Type: F42; Serial: 004401564900005 Program Name: PCS 1900 Communication System: PCS 1900; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 1880 MHz; σ = 1.4 mho/m; εr = 40.8; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.07, 8.07, 8.07); Calibrated: 26.09.2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 21.09.2011 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Cheek Right/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.738 mW/g Cheek Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.75 V/m; Power Drift = -0.012 dB Peak SAR (extrapolated) = 1.21 W/kg SAR(1 g) = 0.774 mW/g; SAR(10 g) = 0.463 mW/g Maximum value of SAR (measured) = 0.855 mW/g Fig. 3: SAR distribution for PCS 1900, channel 661, cheek position, right side of head (November 11, 2011; Ambient Temperature: 22.1° C; Liquid Temperature: 21.7° C).

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 6 of 19 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: F42_yprm_2.da4 DUT: Kyocera; Type: F42; Serial: 004401564900005 Program Name: PCS 1900 Communication System: PCS 1900; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 1880 MHz; σ = 1.4 mho/m; εr = 40.8; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.07, 8.07, 8.07); Calibrated: 26.09.2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 21.09.2011 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Tilted Right/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.265 mW/g Tilted Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.7 V/m; Power Drift = -0.029 dB Peak SAR (extrapolated) = 0.390 W/kg SAR(1 g) = 0.248 mW/g; SAR(10 g) = 0.150 mW/g Maximum value of SAR (measured) = 0.272 mW/g Fig. 4: SAR distribution for PCS 1900, channel 661, tilted position, right side of head (November 11, 2011; Ambient Temperature: 22.1° C; Liquid Temperature: 21.7° C).

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 7 of 19 2 SAR Distribution Plots, PCS/GPRS 1900, Body Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: F42_yphm_1_dspl_up_gprs_15mm.da4 DUT: Kyocera; Type: F42; Serial: 004401564900005 Program Name: GPRS 1900 Communication System: GPRS 1900; Frequency: 1880 MHz;Duty Cycle: 1:2.66 Medium parameters used: f = 1880 MHz; σ = 1.5 mho/m; εr = 53.2; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.03, 8.03, 8.03); Calibrated: 26.09.2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 21.09.2011 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Body Worn/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.298 mW/g Body Worn/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.22 V/m; Power Drift = 0.071 dB Peak SAR (extrapolated) = 0.448 W/kg SAR(1 g) = 0.274 mW/g; SAR(10 g) = 0.166 mW/g Maximum value of SAR (measured) = 0.294 mW/g Fig. 5: SAR distribution for GPRS 1900 (Class 11), channel 661, body worn configuration without accessory, display towards the phantom, 15 mm distance (November 11, 2011; Ambient Temperature: 21.8° C; Liquid Temperature: 21.6° C).

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 8 of 19 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: F42_yphm_2_dspl_down_gprs_15mm.da4 DUT: Kyocera; Type: F42; Serial: 004401564900005 Program Name: GPRS 1900 Communication System: GPRS 1900; Frequency: 1880 MHz;Duty Cycle: 1:2.66 Medium parameters used: f = 1880 MHz; σ = 1.5 mho/m; εr = 53.2; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.03, 8.03, 8.03); Calibrated: 26.09.2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 21.09.2011 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Body Worn/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.318 mW/g Body Worn/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.67 V/m; Power Drift = 0.128 dB Peak SAR (extrapolated) = 0.512 W/kg SAR(1 g) = 0.296 mW/g; SAR(10 g) = 0.174 mW/g Maximum value of SAR (measured) = 0.322 mW/g Fig. 6: SAR distribution for GPRS 1900 (Class 11), channel 661, body worn configuration without accessory, display towards the ground, 15 mm distance (November 11, 2011; Ambient Temperature: 21.8° C; Liquid Temperature: 21.6° C).

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 9 of 19 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: F42_yphm_1_dspl_up_15mm_hs.da4 DUT: Kyocera; Type: F42; Serial: 004401564900005 Program Name: PCS 1900 Communication System: PCS 1900; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 1880 MHz; σ = 1.5 mho/m; εr = 53.2; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.03, 8.03, 8.03); Calibrated: 26.09.2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 21.09.2011 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Body Worn/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.235 mW/g Body Worn/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.26 V/m; Power Drift = -0.185 dB Peak SAR (extrapolated) = 0.392 W/kg SAR(1 g) = 0.240 mW/g; SAR(10 g) = 0.145 mW/g Maximum value of SAR (measured) = 0.260 mW/g Fig. 7: SAR distribution for PCS 1900, channel 661, body worn configuration with attached headset, display towards the phantom, 15 mm distance (November 11 , 2011; Ambient Temperature: 21.8° C; Liquid Temperature: 21.6° C).

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 10 of 19 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: F42_yphm_2_dspl_down_15mm_hs.da4 DUT: Kyocera; Type: F42; Serial: 004401564900005 Program Name: PCS 1900 Communication System: PCS 1900; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 1880 MHz; σ = 1.5 mho/m; εr = 53.2; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.03, 8.03, 8.03); Calibrated: 26.09.2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 21.09.2011 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Body Worn/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.264 mW/g Body Worn/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.12 V/m; Power Drift = 0.166 dB Peak SAR (extrapolated) = 0.413 W/kg SAR(1 g) = 0.240 mW/g; SAR(10 g) = 0.141 mW/g Maximum value of SAR (measured) = 0.262 mW/g Fig. 8: SAR distribution for PCS 1900, channel 661, body worn configuration with attached headset, display towards the ground, 15 mm distance (November 11, 2011; Ambient Temperature: 21.8° C; Liquid Temperature: 21.6° C).

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 11 of 19 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: F42_yphm_2_dspl_down_gprs_10mm.da4 DUT: Kyocera; Type: F42; Serial: 004401564900005 Program Name: GPRS 1900 Communication System: GPRS 1900; Frequency: 1880 MHz;Duty Cycle: 1:2.66 Medium parameters used: f = 1880 MHz; σ = 1.5 mho/m; εr = 53.2; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(8.03, 8.03, 8.03); Calibrated: 26.09.2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 21.09.2011 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Body Worn/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.578 mW/g Body Worn/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.70 V/m; Power Drift = -0.052 dB Peak SAR (extrapolated) = 0.999 W/kg SAR(1 g) = 0.547 mW/g; SAR(10 g) = 0.308 mW/g Maximum value of SAR (measured) = 0.598 mW/g Fig. 9: SAR distribution for GPRS 1900 (Class 11), channel 661, body worn configuration, display towards the ground, 10 mm distance (November 11, 2011; Ambient Temperature: 21.8° C; Liquid Temperature: 21.6° C).

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 12 of 19 3 SAR Distribution Plots, IEEE 802.11 b, Body Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: F42_ywhm_1_dspl_up_15mm_b.da4 DUT: Kyocera; Type: F42; Serial: 004401564900005 Program Name: IEEE 802.11 b Communication System: 2.4 GHz; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2437 MHz; σ = 1.96 mho/m; εr = 53.2; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(7.42, 7.42, 7.42); Calibrated: 26.09.2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 21.09.2011 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Body Worn/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.015 mW/g Body Worn/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.01 V/m; Power Drift = 0.093 dB Peak SAR (extrapolated) = 0.035 W/kg SAR(1 g) = 0.016 mW/g; SAR(10 g) = 0.00776 mW/g Maximum value of SAR (measured) = 0.018 mW/g Fig. 10: SAR distribution for b-mode, channel 6, body worn configuration without accessory, display towards the phantom, 15 mm distance (November 14, 2011; Ambient Temperature: 22.0° C; Liquid Temperature: 21.6° C).

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 13 of 19 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: F42_ywhh_2_dspl_down_15mm_b.da4 DUT: Kyocera; Type: F42; Serial: 004401564900005 Program Name: IEEE 802.11 b Communication System: 2.4 GHz; Frequency: 2462 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2462 MHz; σ = 2 mho/m; εr = 53.3; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(7.42, 7.42, 7.42); Calibrated: 26.09.2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 21.09.2011 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Body Worn/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.014 mW/g Body Worn/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.37 V/m; Power Drift = 0.128 dB Peak SAR (extrapolated) = 0.045 W/kg SAR(1 g) = 0.017 mW/g; SAR(10 g) = 0.00764 mW/g Maximum value of SAR (measured) = 0.019 mW/g Fig. 11: SAR distribution for b-mode, channel 11, body worn configuration without accessory, display towards the ground, 15 mm distance (November 14, 2011; Ambient Temperature: 22.0° C; Liquid Temperature: 21.6° C).

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 14 of 19 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: F42_ywhm_1_dspl_up_15mm_g.da4 DUT: Kyocera; Type: F42; Serial: 004401350042053 Program Name: IEEE 802.11 g Communication System: 2.4 GHz; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2437 MHz; σ = 1.96 mho/m; εr = 53.2; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(7.42, 7.42, 7.42); Calibrated: 26.09.2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 21.09.2011 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Body Worn/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.017 mW/g Body Worn/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.94 V/m; Power Drift = 0.146 dB Peak SAR (extrapolated) = 0.042 W/kg SAR(1 g) = 0.016 mW/g; SAR(10 g) = 0.00718 mW/g Maximum value of SAR (measured) = 0.018 mW/g Fig. 12: SAR distribution for g-mode, channel 6, body worn configuration without accessory, display towards the phantom, 15 mm distance (November 14, 2011; Ambient Temperature: 22.0° C; Liquid Temperature: 21.6° C).

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 15 of 19 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: F42_ywhh_2_dspl_down_15mm_g.da4 DUT: Kyocera; Type: F42; Serial: 004401350042053 Program Name: IEEE 802.11 g Communication System: 2.4 GHz; Frequency: 2462 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2462 MHz; σ = 2 mho/m; εr = 53.3; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(7.42, 7.42, 7.42); Calibrated: 26.09.2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 21.09.2011 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Body Worn/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.017 mW/g Body Worn/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.46 V/m; Power Drift = 0.064 dB Peak SAR (extrapolated) = 0.039 W/kg SAR(1 g) = 0.018 mW/g; SAR(10 g) = 0.00833 mW/g Maximum value of SAR (measured) = 0.020 mW/g Fig. 13: SAR distribution for g-mode, channel 11, body worn configuration without accessory, display towards the ground, 15 mm distance (November 14, 2011; Ambient Temperature: 22.0° C; Liquid Temperature: 21.6° C).

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 16 of 19 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: F42_ywhh_2_dspl_down_15mm_n.da4 DUT: Kyocera; Type: F42; Serial: 004401350042053 Program Name: IEEE 802.11 n Communication System: 2.4 GHz; Frequency: 2462 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2462 MHz; σ = 2 mho/m; εr = 53.3; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 - SN3536; ConvF(7.42, 7.42, 7.42); Calibrated: 26.09.2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 21.09.2011 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Body Worn/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.018 mW/g Body Worn/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.38 V/m; Power Drift = 0.191 dB Peak SAR (extrapolated) = 0.035 W/kg SAR(1 g) = 0.016 mW/g; SAR(10 g) = 0.00755 mW/g Maximum value of SAR (measured) = 0.017 mW/g Fig. 14: SAR distribution for n-mode, channel 11, body worn configuration without accessory, display towards the ground, 15 mm distance (November 14, 2011; Ambient Temperature: 22.0° C; Liquid Temperature: 21.6° C).

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 17 of 19 4 SAR Z-axis Scans (Validation) Fig. 15: SAR versus liquid depth, 1900 MHz, head (PCS 1900) (November 11, 2011; Ambient Temperature: 22.3° C; Liquid Temperature: 21.8° C). Fig. 16: SAR versus liquid depth, 1900 MHz, body (GPRS 1900) (November 11, 2011; Ambient Temperature: 21.8° C; Liquid Temperature: 21.6° C).

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 18 of 19 Fig. 17: SAR versus liquid depth, 2450 MHz, body (IEEE 802.11) (November 14, 2011; Ambient Temperature: 22.0° C; Liquid Temperature: 21.6° C). 5 SAR Z-axis Scans (Measurements) The following pictures show the plots of SAR versus liquid depth for the worst case values. Fig. 18: SAR versus liquid depth, head: PCS 1900, channel 661, cheek position, right side of head (November 11, 2011; Ambient Temperature: 22.1° C; Liquid Temperature: 21.7° C).

SAR_Report_7layers_6620_872_FCC_1900_2450_Plots_F42 Page 19 of 19 Fig. 19: SAR versus liquid depth, body: GPRS 1900 (Class 11), channel 661, display towards the ground (November 11, 2011; Ambient Temperature: 21.8° C; Liquid Temperature: 21.6° C). Fig. 20: SAR versus liquid depth, body: 802.11 g, channel 11, display towards the ground (November 14, 2011; Ambient Temperature: 22.0° C; Liquid Temperature: 21.6° C).


Document Created: 2011-11-28 19:37:59
Document Modified: 2011-11-28 19:37:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC