SAR plots body - hotspot

FCC ID: V65C5215

RF Exposure Info

Download: PDF
FCCID_1969590

                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0


EXHIBIT 9 APPENDIX B3: SAR DISTRIBUTION PLOTS (HOTSPOT)


                                           CELL – BC0




© 2013 Comptest Services LLC                         Page 1 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/14/2013

FCC C5215 CDMA-800 BC-0 Flat with 1cm Air Space, Front Ch. 1013
Communication System: CDMA-800, Frequency: 824.7 MHz, Duty Cycle: 1:1
                                                                                                            3
Medium: M800,Medium parameters used (interpolated): f = 824.7 MHz; σ = 0.96 mho/m; εr = 53.8; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

CDMA-800 FLAT - Front Ch1013/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.697 mW/g

CDMA-800 FLAT - Front Ch1013/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 26.3 V/m; Power Drift = -0.068 dB
Peak SAR (extrapolated) = 0.829 W/kg
SAR(1 g) = 0.647 mW/g; SAR(10 g) = 0.489 mW/g
Maximum value of SAR (measured) = 0.684 mW/g




                                    0 dB = 0.697mW/g




© 2013 Comptest Services LLC                         Page 2 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/14/2013

FCC C5215 CDMA-800 BC-0 Flat with 1cm Air Space, Back Ch. 1013
Communication System: CDMA-800, Frequency: 824.7 MHz, Duty Cycle: 1:1
                                                                                                            3
Medium: M800,Medium parameters used (interpolated): f = 824.7 MHz; σ = 0.96 mho/m; εr = 53.8; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

CDMA-800 FLAT Back Ch1013/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 1.19 mW/g

CDMA-800 FLAT Back Ch1013/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 30.9 V/m; Power Drift = 0.073 dB
Peak SAR (extrapolated) = 1.50 W/kg
SAR(1 g) = 1.12 mW/g; SAR(10 g) = 0.816 mW/g
Maximum value of SAR (measured) = 1.19 mW/g

CDMA-800 FLAT Back Ch1013/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 30.9 V/m; Power Drift = 0.073 dB
Peak SAR (extrapolated) = 1.42 W/kg
SAR(1 g) = 0.777 mW/g; SAR(10 g) = 0.498 mW/g
Maximum value of SAR (measured) = 1.01 mW/g




                                    0 dB = 1.19mW/g




© 2013 Comptest Services LLC                         Page 3 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


       COMPTEST
            Services LLC

                     Interpolated SAR(x,y,z,f0)
                     SAR; Z Scan:Value Along Z, X=0, Y=0
 1.1

 1.0

0.9

0.8

0.7
        /




0.3

0.2

0.1

—0.0


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/14/2013

FCC C5215 CDMA-800 BC-0 Flat with 1cm Air Space, Back Ch. 384
Communication System: CDMA-800, Frequency: 836.52 MHz, Duty Cycle: 1:1
                                                                                                             3
Medium: M800,Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.96 mho/m; εr = 53.8; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

CDMA-800 FLAT - Back Ch384/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 1.14 mW/g

CDMA-800 FLAT - Back Ch384/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 30.9 V/m; Power Drift = -0.112 dB
Peak SAR (extrapolated) = 1.39 W/kg
SAR(1 g) = 1.06 mW/g; SAR(10 g) = 0.775 mW/g
Maximum value of SAR (measured) = 1.13 mW/g

CDMA-800 FLAT - Back Ch384/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 30.9 V/m; Power Drift = -0.112 dB
Peak SAR (extrapolated) = 1.44 W/kg
SAR(1 g) = 0.811 mW/g; SAR(10 g) = 0.466 mW/g
Maximum value of SAR (measured) = 0.907 mW/g




                                    0 dB = 1.14mW/g




© 2013 Comptest Services LLC                         Page 5 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/14/2013

FCC C5215 CDMA-800 BC-0 Flat with 1cm Air Space, Back Ch. 777
Communication System: CDMA-800, Frequency: 848.31 MHz, Duty Cycle: 1:1
                                                                                                              3
Medium: M800,Medium parameters used (interpolated): f = 848.31 MHz; σ = 0.96 mho/m; ε r = 53.8; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

CDMA-800 FLAT - Back Ch777/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 1.06 mW/g

CDMA-800 FLAT - Back Ch777/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 30.4 V/m; Power Drift = -0.109 dB
Peak SAR (extrapolated) = 1.25 W/kg
SAR(1 g) = 0.968 mW/g; SAR(10 g) = 0.713 mW/g
Maximum value of SAR (measured) = 1.03 mW/g

CDMA-800 FLAT - Back Ch777/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 30.4 V/m; Power Drift = -0.109 dB
Peak SAR (extrapolated) = 1.46 W/kg
SAR(1 g) = 0.805 mW/g; SAR(10 g) = 0.448 mW/g
Maximum value of SAR (measured) = 0.878 mW/g




                                    0 dB = 1.06mW/g




© 2013 Comptest Services LLC                         Page 6 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/14/2013

FCC C5215 CDMA-800 BC-0 Flat with 1cm Air Space, Left Ch. 1013
Communication System: CDMA-800, Frequency: 824.7 MHz, Duty Cycle: 1:1
                                                                                                            3
Medium: M800,Medium parameters used (interpolated): f = 824.7 MHz; σ = 0.95 mho/m; εr = 54.1; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

Cell Ch1013 FLAT -Left/Area Scan (91x41x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.576 mW/g

Cell Ch1013 FLAT -Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 24.3 V/m; Power Drift = -0.009 dB
Peak SAR (extrapolated) = 0.738 W/kg
SAR(1 g) = 0.535 mW/g; SAR(10 g) = 0.372 mW/g
Maximum value of SAR (measured) = 0.571 mW/g




                                    0 dB = 0.576mW/g




© 2013 Comptest Services LLC                         Page 7 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                   COMPTEST
                          Services LLC

                                          Interpolated SAR(x,y,z,f0)
                                         SAR; Z Scan:Value Along Z, X=0, Y=0



         sel—}
         al |®
         al [\
                    -/
 mWi/g

               I
         O
         C




         0.0                                                                                   42—        o4 —,




[' "l riee eprcerepreabrordaiebuepertrtete Onreusmy nuimp enairvaarre ererirons perreuin on e orriper ous evrrreve ce _ 1


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/14/2013

FCC C5215 CDMA-800 BC-0 Flat with 1cm Air Space, Right Ch. 1013
Communication System: CDMA-800, Frequency: 824.7 MHz, Duty Cycle: 1:1
                                                                                                            3
Medium: M800,Medium parameters used (interpolated): f = 824.7 MHz; σ = 0.95 mho/m; εr = 54.1; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

Cell Ch1013 FLAT - Right/Area Scan (91x41x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.695 mW/g

Cell Ch1013 FLAT - Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 27.3 V/m; Power Drift = -0.071 dB
Peak SAR (extrapolated) = 0.857 W/kg
SAR(1 g) = 0.636 mW/g; SAR(10 g) = 0.450 mW/g
Maximum value of SAR (measured) = 0.676 mW/g




                                    0 dB = 0.695mW/g




© 2013 Comptest Services LLC                         Page 9 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/14/2013

FCC C5215 CDMA-800 BC-0 Flat with 1cm Air Space, Bottom Ch. 1013
Communication System: CDMA-800, Frequency: 824.7 MHz, Duty Cycle: 1:1
                                                                                                            3
Medium: M800,Medium parameters used (interpolated): f = 824.7 MHz; σ = 0.95 mho/m; εr = 54.1; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

CELL Ch1013 FLAT -Bottom/Area Scan (71x41x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.166 mW/g

CELL Ch1013 FLAT -Bottom/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 11.2 V/m; Power Drift = 0.173 dB
Peak SAR (extrapolated) = 0.244 W/kg
SAR(1 g) = 0.148 mW/g; SAR(10 g) = 0.087 mW/g
Maximum value of SAR (measured) = 0.162 mW/g




                                    0 dB = 0.166mW/g




© 2013 Comptest Services LLC                        Page 10 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0



                                           CELL - BC10




© 2013 Comptest Services LLC                        Page 11 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/14/2013

FCC C5215 CDMA-800 BC-10 Flat with 1cm Air Space, Front Ch. 476
Communication System: Cell BC-10 , Frequency: 820.5 MHz, Duty Cycle: 1:1
                                                                                                            3
Medium: M800,Medium parameters used (interpolated): f = 820.5 MHz; σ = 0.96 mho/m; εr = 53.8; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C

CDMA-800 FLAT - Front Ch580/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.702 mW/g

CDMA-800 FLAT - Front Ch580/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 26.6 V/m; Power Drift = -0.098 dB
Peak SAR (extrapolated) = 0.861 W/kg
SAR(1 g) = 0.663 mW/g; SAR(10 g) = 0.493 mW/g
Maximum value of SAR (measured) = 0.697 mW/g




                                    0 dB = 0.702mW/g




© 2013 Comptest Services LLC                        Page 12 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/14/2013

FCC C5215 CDMA-800 BC-10 Flat with 1cm Air Space, Back Ch. 476
Communication System: Cell BC-10 , Frequency: 817.9 MHz, Duty Cycle: 1:1
                                                                                                            3
Medium: M800,Medium parameters used (interpolated): f = 817.9 MHz; σ = 0.96 mho/m; εr = 53.8; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

CDMA-800 FLAT Back Ch476/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 1.13 mW/g

CDMA-800 FLAT Back Ch476/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 29.9 V/m; Power Drift = 0.024 dB
Peak SAR (extrapolated) = 1.45 W/kg
SAR(1 g) = 1.09 mW/g; SAR(10 g) = 0.790 mW/g
Maximum value of SAR (measured) = 1.15 mW/g

CDMA-800 FLAT Back Ch476/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 29.9 V/m; Power Drift = 0.024 dB
Peak SAR (extrapolated) = 1.26 W/kg
SAR(1 g) = 0.739 mW/g; SAR(10 g) = 0.452 mW/g
Maximum value of SAR (measured) = 0.802 mW/g




                                    0 dB = 1.13mW/g




© 2013 Comptest Services LLC                        Page 13 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/14/2013

FCC C5215 CDMA-800 BC-10 Flat with 1cm Air Space, Back Ch. 580
Communication System: Cell BC-10 , Frequency: 820.5 MHz, Duty Cycle: 1:1
                                                                                                            3
Medium: M800,Medium parameters used (interpolated): f = 820.5 MHz; σ = 0.96 mho/m; εr = 53.8; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

CDMA-800 FLAT - Back Ch580/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 1.16 mW/g

CDMA-800 FLAT - Back Ch580/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 30.6 V/m; Power Drift = -0.162 dB
Peak SAR (extrapolated) = 1.48 W/kg
SAR(1 g) = 1.11 mW/g; SAR(10 g) = 0.802 mW/g
Maximum value of SAR (measured) = 1.18 mW/g

CDMA-800 FLAT - Back Ch580/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 30.6 V/m; Power Drift = -0.162 dB
Peak SAR (extrapolated) = 1.27 W/kg
SAR(1 g) = 0.741 mW/g; SAR(10 g) = 0.452 mW/g
Maximum value of SAR (measured) = 0.805 mW/g




                                    0 dB = 1.16mW/g




© 2013 Comptest Services LLC                        Page 14 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                         COMPTEST
                               Services LLC

                                         Interpolated SAR(x,y,z,f0)
                                         SAR; Z Scan:Value Along Z, X=0, Y=0
                 T
                 PPETT
                 PPE
                 n eE
 mWi/g
         [«=]
            in




                           /
                 Eon
                 EJ




[' "l riee eprcerepreabrordaiebuepertrtete enreues fe nanpenairearuieerrrirons perreuin on e vrriper ous evrrreve ce _ 1


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/14/2013

FCC C5215 CDMA-800 BC-10 Flat with 1cm Air Space, Back Ch. 684
Communication System: Cell BC-10 , Frequency: 823.1 MHz, Duty Cycle: 1:1
                                                                                                            3
Medium: M800,Medium parameters used (interpolated): f = 823.1 MHz; σ = 0.96 mho/m; εr = 53.8; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

CDMA-800 FLAT Back Ch684/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 1.24 mW/g

CDMA-800 FLAT Back Ch684/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 31.7 V/m; Power Drift = -0.175 dB
Peak SAR (extrapolated) = 1.53 W/kg
SAR(1 g) = 1.15 mW/g; SAR(10 g) = 0.833 mW/g
Maximum value of SAR (measured) = 1.21 mW/g

CDMA-800 FLAT Back Ch684/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 31.7 V/m; Power Drift = -0.175 dB
Peak SAR (extrapolated) = 1.46 W/kg
SAR(1 g) = 0.788 mW/g; SAR(10 g) = 0.505 mW/g
Maximum value of SAR (measured) = 1.04 mW/g




                                    0 dB = 1.24mW/g




© 2013 Comptest Services LLC                        Page 16 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/14/2013

FCC C5215 CDMA-800 BC-10 Flat with 1cm Air Space, Left Ch. 580
Communication System: Cell BC-10 , Frequency: 820.5 MHz, Duty Cycle: 1:1
                                                                                                            3
Medium: M800,Medium parameters used (interpolated): f = 820.5 MHz; σ = 0.95 mho/m; εr = 54.1; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

Cell Ch580 FLAT -Left/Area Scan (91x41x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.542 mW/g

Cell Ch580 FLAT -Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 23.4 V/m; Power Drift = 0.002 dB
Peak SAR (extrapolated) = 0.684 W/kg
SAR(1 g) = 0.498 mW/g; SAR(10 g) = 0.348 mW/g
Maximum value of SAR (measured) = 0.531 mW/g




                                    0 dB = 0.542mW/g




© 2013 Comptest Services LLC                        Page 17 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/14/2013

FCC C5215 CDMA-800 BC-10 Flat with 1cm Air Space, Right Ch. 580
Communication System: Cell BC-10 , Frequency: 820.5 MHz, Duty Cycle: 1:1
                                                                                                            3
Medium: M800,Medium parameters used (interpolated): f = 820.5 MHz; σ = 0.95 mho/m; εr = 54.1; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

Cell Ch580 FLAT - Right/Area Scan (91x41x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.673 mW/g

Cell Ch580 FLAT - Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 27.1 V/m; Power Drift = -0.128 dB
Peak SAR (extrapolated) = 0.862 W/kg
SAR(1 g) = 0.628 mW/g; SAR(10 g) = 0.445 mW/g
Maximum value of SAR (measured) = 0.671 mW/g




                                     0 dB = 0.673mW/g




© 2013 Comptest Services LLC                        Page 18 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/14/2013

FCC C5215 CDMA-800 BC-10 Flat with 1cm Air Space, Bottom Ch. 580
Communication System: Cell BC-10 , Frequency: 820.5 MHz, Duty Cycle: 1:1
                                                                                                            3
Medium: M800,Medium parameters used (interpolated): f = 820.5 MHz; σ = 0.95 mho/m; εr = 54.1; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

CELL Ch580 FLAT -Bottom/Area Scan (71x41x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.169 mW/g

CELL Ch580 FLAT -Bottom/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 11.7 V/m; Power Drift = -0.185 dB
Peak SAR (extrapolated) = 0.244 W/kg
SAR(1 g) = 0.149 mW/g; SAR(10 g) = 0.088 mW/g
Maximum value of SAR (measured) = 0.164 mW/g




                                    0 dB = 0.169mW/g




© 2013 Comptest Services LLC                        Page 19 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0


                                                   PCS




© 2013 Comptest Services LLC                        Page 20 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/21/2013

FCC C5215 PCS Flat with 1cm Air Space, Front Ch. 1175
Communication System: CDMA-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1
Medium: M1800,Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.55 mho/m; εr = 51.8; ρ = 1000
     3
kg/m
Phantom: SAM_4,Phantom section: Flat Section
DASY4 Configuration:
Probe: ET3DV6 - SN1618, ConvF(4.42, 4.42, 4.42), Calibrated: 9/13/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn530,Calibrated: 5/30/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

CDMA-1900 FLAT - Face Up Ch1175/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.845 mW/g

CDMA-1900 FLAT - Face Up Ch1175/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 11.5 V/m; Power Drift = -0.188 dB
Peak SAR (extrapolated) = 0.988 W/kg
SAR(1 g) = 0.734 mW/g; SAR(10 g) = 0.479 mW/g
Maximum value of SAR (measured) = 0.793 mW/g




                                    0 dB = 0.845mW/g




© 2013 Comptest Services LLC                        Page 21 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/212013

FCC C5215 PCS Flat with 1cm Air Space, Back Ch. 1175
Communication System: CDMA-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1
Medium: M1800,Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.55 mho/m; εr = 51.8; ρ = 1000
     3
kg/m
Phantom: SAM_4,Phantom section: Flat Section
DASY4 Configuration:
Probe: ET3DV6 - SN1618, ConvF(4.42, 4.42, 4.42), Calibrated: 9/13/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn530,Calibrated: 5/30/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

CDMA-1900 FLAT Face Down Ch1175/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.695 mW/g

CDMA-1900 FLAT Face Down Ch1175/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 10.7 V/m; Power Drift = -0.096 dB
Peak SAR (extrapolated) = 0.857 W/kg
SAR(1 g) = 0.630 mW/g; SAR(10 g) = 0.422 mW/g
Maximum value of SAR (measured) = 0.678 mW/g




                                    0 dB = 0.695mW/g




© 2013 Comptest Services LLC                        Page 22 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                COMPTEST
                   Services LLC

                            Interpolated SAR(x,y,z,f0)
                            SAR; Z Scan:Value Along Z, X=0, Y=0
        0.18

        0. 16

        0.14

        0.12
mWi/g




        0.04

        0.02

        0.00




                                                                  wes   n vencaper h ns wever n rurnene eneane s   =


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/21/2013

FCC C5215 PCS Flat with 1cm Air Space, Left Ch. 1175
Communication System: PCS-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1
Medium: M1800,Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.55 mho/m; ε r = 51.8; ρ = 1000
     3
kg/m
Phantom: SAM_4,Phantom section: Flat Section
DASY4 Configuration:
Probe: ET3DV6 - SN1618, ConvF(4.42, 4.42, 4.42), Calibrated: 9/13/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn530,Calibrated: 5/30/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

PCS Ch1175 FLAT -Left/Area Scan (91x41x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.658 mW/g

PCS Ch1175 FLAT -Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 21.4 V/m; Power Drift = -0.070 dB
Peak SAR (extrapolated) = 0.823 W/kg
SAR(1 g) = 0.589 mW/g; SAR(10 g) = 0.371 mW/g
Maximum value of SAR (measured) = 0.640 mW/g




                                    0 dB = 0.658mW/g




© 2013 Comptest Services LLC                        Page 24 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/212013

FCC C5215 PCS Flat with 1cm Air Space, Right Ch. 1175
Communication System: PCS-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1
Medium: M1800,Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.55 mho/m; εr = 51.8; ρ = 1000
     3
kg/m
Phantom: SAM_4,Phantom section: Flat Section
DASY4 Configuration:
Probe: ET3DV6 - SN1618, ConvF(4.42, 4.42, 4.42), Calibrated: 9/13/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn530,Calibrated: 5/30/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

PCS Ch1175 FLAT - Right/Area Scan (91x41x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.126 mW/g

PCS Ch1175 FLAT - Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 6.80 V/m; Power Drift = -0.004 dB
Peak SAR (extrapolated) = 0.160 W/kg
SAR(1 g) = 0.116 mW/g; SAR(10 g) = 0.074 mW/g
Maximum value of SAR (measured) = 0.125 mW/g

PCS Ch1175 FLAT - Right/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 6.80 V/m; Power Drift = -0.004 dB
Peak SAR (extrapolated) = 0.151 W/kg
SAR(1 g) = 0.109 mW/g; SAR(10 g) = 0.071 mW/g
Maximum value of SAR (measured) = 0.119 mW/g




                                    0 dB = 0.126mW/g




© 2013 Comptest Services LLC                        Page 25 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 03/212013

FCC C5215 PCS Flat with 1cm Air Space, Bottom Ch. 1175
Communication System: PCS-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1
Medium: M1800,Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.55 mho/m; ε r = 51.8; ρ = 1000
     3
kg/m
Phantom: SAM_4,Phantom section: Flat Section
DASY4 Configuration:
Probe: ET3DV6 - SN1618, ConvF(4.44, 4.44, 4.44), Calibrated: 9/19/2011
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn530,Calibrated: 5/30/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8                           22.0

PCS Ch1175 FLAT -Bottom/Area Scan (71x41x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.617 mW/g

PCS Ch1175 FLAT -Bottom/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 20.2 V/m; Power Drift = -0.064 dB
Peak SAR (extrapolated) = 0.845 W/kg
SAR(1 g) = 0.520 mW/g; SAR(10 g) = 0.304 mW/g
Maximum value of SAR (measured) = 0.570 mW/g




                                    0 dB = 0.617mW/g




© 2013 Comptest Services LLC                        Page 26 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0


                                                   WIFI




© 2013 Comptest Services LLC                        Page 27 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 04/02/2013

FCC C5215 WIFI Flat with 1cm Air Space, Front Ch. 6
Communication System: WLAN-2450, Frequency: 2437 MHz, Duty Cycle: 1:1
                                                                                             3
Medium: M2450,Medium parameters used: f = 2400 MHz; σ = 1.96 mho/m; εr = 51.8; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(4.09, 4.09, 4.09), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C

802.11b 1Mbps ch6 Face UP/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.041 mW/g

802.11b 1Mbps ch6 Face UP/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 0.649 V/m; Power Drift = 0.007 dB
Peak SAR (extrapolated) = 0.073 W/kg
SAR(1 g) = 0.038 mW/g; SAR(10 g) = 0.021 mW/g
Maximum value of SAR (measured) = 0.042 mW/g

802.11b 1Mbps ch6 Face UP/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 0.649 V/m; Power Drift = 0.007 dB
Peak SAR (extrapolated) = 0.072 W/kg
SAR(1 g) = 0.034 mW/g; SAR(10 g) = 0.018 mW/g
Maximum value of SAR (measured) = 0.037 mW/g




                                0 dB = 0.041mW/g




© 2013 Comptest Services LLC                        Page 28 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 04/02/2013

FCC C5215 WIFI Flat with 1cm Air Space, Back Ch. 6
Communication System: WLAN-2450, Frequency: 2437 MHz, Duty Cycle: 1:1
                                                                                             3
Medium: M2450,Medium parameters used: f = 2400 MHz; σ = 1.96 mho/m; εr = 51.8; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(4.09, 4.09, 4.09), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C

802.11b 1Mbps ch6 Face DOWN/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.237 mW/g

802.11b 1Mbps ch6 Face DOWN/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 4.65 V/m; Power Drift = -0.047 dB
Peak SAR (extrapolated) = 0.492 W/kg
SAR(1 g) = 0.213 mW/g; SAR(10 g) = 0.093 mW/g
Maximum value of SAR (measured) = 0.249 mW/g




                                  0 dB = 0.237mW/g




© 2013 Comptest Services LLC                        Page 29 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                  COMPTEST                      Services LLC

                                                                         Interpolated SAR(x,y,z,f0)
                                                                     SAR; Z Scan:Value Along Z, X=0, Y=0
    0.30
                   +
           TT
           TT




    0.25
                    _ |_&a—+*+**




    0.20
           OTOT
           P
 mWi/g
    o
     n



                                       /
           O
           P
           PP




    0.10
                                       /




    0.05                                       \




           m                   1L__|       1          1   1L__|          1   1L__|          1   1   1          1   I   I          I   1L__|          L__L__          1   1L__|

                  0.00                         0.02               0.04               0.06               0.08               0.10               0.12            0.14               0.16
                                                                                                        m




[' "l riee eprceeeprearordaiebuepertrtete errvefur fe eneaireuesrireerniibors pereuin on e uriipe e vun evrreve eeen _ 1


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date: 04/03/2013

FCC C5215 WIFI Flat with 1cm Air Space, Left Ch. 6
Communication System: WLAN-2450, Frequency: 2437 MHz, Duty Cycle: 1:1
                                                                                             3
Medium: M2450,Medium parameters used: f = 2400 MHz; σ = 1.94 mho/m; εr = 51.9; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(4.09, 4.09, 4.09), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C

WLAN Ch6 FLAT - Left/Area Scan (101x41x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.008 mW/g

WLAN Ch6 FLAT - Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 1.73 V/m; Power Drift = -0.067 dB
Peak SAR (extrapolated) = 0.016 W/kg
SAR(1 g) = 0.00828 mW/g; SAR(10 g) = 0.00416 mW/g
Maximum value of SAR (measured) = 0.010 mW/g

WLAN Ch6 FLAT - Left/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 1.73 V/m; Power Drift = -0.067 dB
Peak SAR (extrapolated) = 0.010 W/kg
SAR(1 g) = 0.00579 mW/g; SAR(10 g) = 0.00286 mW/g
Maximum value of SAR (measured) = 0.007 mW/g




                                     0 dB = 0.010mW/g




© 2013 Comptest Services LLC                        Page 31 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


                                                                         Applicant:   Kyocera
                                                                          FCC ID:     V65C5215
                                                                         Report #:    CT- C5215-9B3-0313-R0

Test Laboratory: Comptest/Kyocera                                                              Date:04/03/2013

FCC C5215 WIFI Flat with 1cm Air Space, Top Ch. 6
Communication System: WLAN-2450, Frequency: 2437 MHz, Duty Cycle: 1:1
                                                                                             3
Medium: M2450,Medium parameters used: f = 2400 MHz; σ = 1.94 mho/m; εr = 51.9; ρ = 1000 kg/m
Phantom: SAM 12,Phantom section: Flat Section
DASY4 Configuration:
Probe: ES3DV3 - SN3036, ConvF(4.09, 4.09, 4.09), Calibrated: 5/29/2012
Sensor-Surface: 4mm (Mechanical Surface Detection),
Electronics: DAE4 Sn603,Calibrated: 9/12/2012
Measurement SW: DASY4, V4.7 Build 80
Postprocessing SW: SEMCAD, V1.8 Build 186
Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C

WLAN Ch6 FLAT -Top/Area Scan (61x41x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 0.034 mW/g

WLAN Ch6 FLAT -Top/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 3.91 V/m; Power Drift = 0.173 dB
Peak SAR (extrapolated) = 0.055 W/kg
SAR(1 g) = 0.030 mW/g; SAR(10 g) = 0.017 mW/g
Maximum value of SAR (measured) = 0.033 mW/g




                                    0 dB = 0.034mW/g




© 2013 Comptest Services LLC                        Page 32 of 32                                SAR Plots Head
    This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.



Document Created: 2013-04-08 15:25:20
Document Modified: 2013-04-08 15:25:20

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC