SAR Validation

FCC ID: V65C5215

RF Exposure Info

Download: PDF
FCCID_1969575

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9A-0313 EXHIBIT 9 APPENDIX A: SAR VALIDATION PLOTS Validation for HEAD © 2013 Comptest Services LLC Page 1 of 16 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9A-0313 Test Laboratory: Comptest/Kyocera Date: 03/11/2013 835MHz Validation , Probe #3036, DAE #603, Dipole #467 Communication System: CW, Frequency: 835 MHz, Duty Cycle: 1:1 Medium: Head 835 MHz,Medium parameters used (interpolated): f = 835 MHz; σ = 0.91 mho/m; ε r = 41.2; ρ = 1000 3 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.8, 5.8, 5.8), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 835MHz/Area Scan (51x121x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.05 mW/g 835MHz/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 32.7 V/m; Power Drift = 0.072 dB Peak SAR (extrapolated) = 1.42 W/kg SAR(1 g) = 0.971 mW/g; SAR(10 g) = 0.632 mW/g Maximum value of SAR (measured) = 1.05 mW/g 0 dB = 1.05mW/g © 2013 Comptest Services LLC Page 2 of 16 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x,y,z,f0) SAR; Z Scan:Value Along Z, X=0, Y=0 "O 1 / mWi/g 4 > I al| O & 00 _ |~+*——4._ —*~*[t [' "l nriee eprveeepreabrorraieb uepartrtete Oreues ty naimg erairea arre rrrrirons uerreuin on e vrriper vusevrreveemen _ 1

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9A-0313 Test Laboratory: Comptest/Kyocera Date: 03/18/2013 1900Mhz Validation @ 20dBm Probe 1618, DAE 530 and Dipole 5d016 Communication System: CW, Frequency: 1900 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used (interpolated): f = 1900 MHz; σ = 1.45 mho/m; ε r = 38.7; ρ = 1000 3 kg/m Phantom: SAM_4,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(5.17, 5.17, 5.17), Calibrated: 9/13/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 1900MHz Validation @20dBm/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 4.67 mW/g 1900MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 32.2 V/m; Power Drift = -0.096 dB Peak SAR (extrapolated) = 6.38 W/kg SAR(1 g) = 3.88 mW/g; SAR(10 g) = 2.07 mW/g Maximum value of SAR (measured) = 4.40 mW/g 0 dB = 4.67mW/g © 2013 Comptest Services LLC Page 4 of 16 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x,y,z,f0) SAR; Z Scan:Value Along Z, X=0, Y=0 5.0 4.5 4.0 3.5 3.0 mWi/g 2.5 |__—*I 2.0 1.5 1.0 0.5 0.0 [' "l nriee eprveeepreabrorraieb uepartrtete Oreues ty nuimg erairea arre rrrrirons uerreuin on e vrriper vusevrreveemen _ 1

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9A-0313 Test Laboratory: Comptest/Kyocera Date: 04/01/2013 2450MHz Validation, Probe #3036, DAE #603, Dipole #776 Communication System: CW, Frequency: 2450 MHz, Duty Cycle: 1:1 3 Medium: HSL2450,Medium parameters used: f = 2450 MHz; σ = 1.85 mho/m; εr = 38.1; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.22, 4.22, 4.22), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 2450MHz Validation @20dBm/Area Scan (61x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 7.22 mW/g 2450MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 51.0 V/m; Power Drift = 0.026 dB Peak SAR (extrapolated) = 12.9 W/kg SAR(1 g) = 5.76 mW/g; SAR(10 g) = 2.56 mW/g Maximum value of SAR (measured) = 6.51 mW/g 0 dB = 7.22mW/g © 2013 Comptest Services LLC Page 6 of 16 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9A-0313 © 2013 Comptest Services LLC Page 7 of 16 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9A-0313 Validation for BODY © 2013 Comptest Services LLC Page 8 of 16 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9A-0313 Test Laboratory: Comptest/Kyocera Date: 03/14/2013 835MHz Validation(Muscle), Probe #3036, DAE #603, Dipole #5d016 Communication System: CW, Frequency: 835 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used: f = 835 MHz; σ = 0.95 mho/m; εr = 54.1; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 835MHz Validation @20dBm/Area Scan (61x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.04 mW/g 835MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 32.0 V/m; Power Drift = 0.132 dB Peak SAR (extrapolated) = 1.41 W/kg SAR(1 g) = 0.969 mW/g; SAR(10 g) = 0.642 mW/g Maximum value of SAR (measured) = 1.05 mW/g 0 dB = 1.04mW/g © 2013 Comptest Services LLC Page 9 of 16 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x,y,z,f0) SAR; Z Scan:Value Along Z, X=0, Y=0 1.2 1.1 1.0 0.9 0.8 0.7 J 30.6 € 0.5 0.4 0.3 0.2 0.1 0.0 [ frrive n vepeeve n k uen revi rene k we we on nepvrt neveveneve se wernursepes en e rmereg en en e voverve er es mt« veverbvener e en owe wer n qper t wevet ww n enc vene enea n =]

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9A-0313 Test Laboratory: Comptest/Kyocera Date: 03/21/2013 1900Mhz(Muscle) Validation @ 20dBm Probe 1618, DAE 675 and Dipole 5d016 Communication System: CW, Frequency: 1900 MHz, Duty Cycle: 1:1 3 Medium: M1800,Medium parameters used (interpolated): f = 1900 MHz; σ = 1.55 mho/m; εr = 51.8; ρ = 1000 kg/m Phantom: SAM_4,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(4.42, 4.42, 4.42), Calibrated: 9/13/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 1900MHz(Muscle) Validation @20dBm/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 4.84 mW/g 1900MHz(Muscle) Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 57.3 V/m; Power Drift = 0.132 dB Peak SAR (extrapolated) = 5.78 W/kg SAR(1 g) = 3.91 mW/g; SAR(10 g) = 2.17 mW/g Maximum value of SAR (measured) = 4.48 mW/g 0 dB = 4.84mW/g © 2013 Comptest Services LLC Page 11 of 16 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x,y,z,f0) SAR; Z Scan:Value Along Z, X=0, Y=0 TT 5.5 EOOE 5.0 4.5 rrbcproorp 4.0 3.5 ooo 3.0 W £2.5 oo 2.0 ooo 1.5 uoo 1.0 oonp 0.5 onb —0.0 To [ frrive n vepeeve n k uen revi rene k we we on nepvrt neveveneve se wernursepes en e rmereg en en e ve fne rr e rvenen c uever bvever e wes we wer n qper t weuey ww n evevene enea n =]

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9A-0313 Test Laboratory: Comptest/Kyocera Date: 04/02/2013 2450MHz Validation (Muscle), Probe #3036, DAE #603, Dipole #776 Communication System: CW, Frequency: 2450 MHz, Duty Cycle: 1:1 3 Medium: M2450,Medium parameters used (interpolated): f = 2450 MHz; σ = 1.96 mho/m; ε r = 51.8; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.09, 4.09, 4.09), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C 2450MHz Validation @20dBm/Area Scan (61x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 6.54 mW/g 2450MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 51.7 V/m; Power Drift = 0.193 dB Peak SAR (extrapolated) = 12.1 W/kg SAR(1 g) = 5.57 mW/g; SAR(10 g) = 2.51 mW/g Maximum value of SAR (measured) = 6.36 mW/g 0 dB = 6.54mW/g © 2013 Comptest Services LLC Page 13 of 16 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x,y,z,f0) SAR; Z Scan:Value Along Z, X=0, Y=0 T TT [s——— ~ ETTA & PP P on PP P P JB mWi/g |L_—*+—| r P P U3 // P O DJ or P _ \ et y *Ct 0 |— — Tee *_44* \ 1 1___| 1 1__1__| 1__ _ 1 1__| 1__1__| 1__1__| 1__1__| L__L__| 0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 m [' "l nriee eprveepreabrorraieb uevartrtete Oreues fe nenairoareuieerrrirons uerreuin on e vrriper vusevrreveemen _ 1

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9A-0313 Test Laboratory: Comptest/Kyocera Date: 04/03/2013 2450MHz Validation (Muscle), Probe #3036, DAE #603, Dipole #776 Communication System: CW, Frequency: 2450 MHz, Duty Cycle: 1:1 3 Medium: M2450,Medium parameters used (interpolated): f = 2450 MHz; σ = 1.94 mho/m; εr = 51.9; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.09, 4.09, 4.09), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C 2450MHz Validation @20dBm/Area Scan (61x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 7.06 mW/g 2450MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 48.1 V/m; Power Drift = 0.016 dB Peak SAR (extrapolated) = 12.2 W/kg SAR(1 g) = 5.63 mW/g; SAR(10 g) = 2.54 mW/g Maximum value of SAR (measured) = 6.38 mW/g 0 dB = 7.06mW/g © 2013 Comptest Services LLC Page 15 of 16 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x,y,z,f0) SAR; Z Scan:Value Along Z, X=0, Y=0 6.0 5.5 5.0 4.5 4.0 3.5 J S 3.0 2 2.5 2.0 1.5 1.0 0.5 0.0 I hn rrve n nepeeve n e ver reviv nene k we ue on nepvrt neveve en mt uen uns s er en inore bvrrevin on e viriper vor vermese eeer _ W


Document Created: 2013-04-08 14:50:37
Document Modified: 2013-04-08 14:50:37
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC