HAC T Coil plots

FCC ID: V65C5215

Test Report

Download: PDF
FCCID_1969573

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 EXHIBIT 13 Appendix C: T-COIL DATA PLOT CELL BC-0 © 2013 Comptest Services LLC Page 1 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_C5215_TCoil_CELL-BC0_Ch.1013 z (axial) Communication System: CDMA_Tri_BC0&10, Frequency: 824.7 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_1013/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 51.5 dB ABM1 comp = 4.43 dB A/m BWC Factor = 0.155979 dB Location: 0.8, -19.2, 3.7 mm General Scans_1013/z (axial) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 53.2 dB ABM1 comp = 4.87 dB A/m BWC Factor = 0.155979 dB Location: 1.6, -18.6, 3.7 mm 0 dB = 374.8 © 2013 Comptest Services LLC Page 2 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_CELL-BC0 _Ch. 1013 x (longitudinal) Communication System: CDMA_Tri_BC0&10, Frequency: 824.7 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_1013/x (longitudinal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 34.9 dB ABM1 comp = -9.01 dB A/m BWC Factor = 0.155979 dB Location: -11.2, -25, 3.7 mm General Scans_1013/x (longitudinal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav WC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 36.4 dB ABM1 comp = -6.07 dB A/m BWC Factor = 0.155979 dB Location: -10.7, -21, 3.7 mm 0 dB = 55.8 © 2013 Comptest Services LLC Page 3 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_CELL-BC0 _Ch. 1013 y (transversal) Communication System: CDMA_Tri_BC0&10, Frequency: 824.7 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_1013/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 38.1 dB ABM1 comp = -9.92 dB A/m BWC Factor = 0.155979 dB Location: -4.2, -9.6, 3.7 mm General Scans_1013/y (transversal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 39.1 dB ABM1 comp = -9.02 dB A/m BWC Factor = 0.155979 dB Location: -4.2, -9.9, 3.7 mm 0 dB = 80.4 © 2013 Comptest Services LLC Page 4 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_CELL-BC0_Ch.384 z (axial) Communication System: CDMA_Tri_BC0&10, Frequency: 836.52 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_384/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 56.9 dB ABM1 comp = 4.25 dB A/m BWC Factor = 0.155041 dB Location: 0.4, -18.8, 3.7 mm General Scans_384/z (axial) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 58.3 dB ABM1 comp = 5.59 dB A/m BWC Factor = 0.155041 dB Location: 1.8, -18.9, 3.7 mm 0 dB = 699.2 © 2013 Comptest Services LLC Page 5 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_CELL-BC0 _Ch.384 x (longitudinal) Communication System: CDMA_Tri_BC0&10, Frequency: 836.52 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_384/x (longitudinal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 46.3 dB ABM1 comp = -3.87 dB A/m BWC Factor = 0.155041 dB Location: -8.7, -21.3, 3.7 mm General Scans_384/x (longitudinal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 45.7 dB ABM1 comp = -6.68 dB A/m BWC Factor = 0.155041 dB Location: -10.1, -24.8, 3.7 mm 0 dB = 205.9 © 2013 Comptest Services LLC Page 6 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_CELL-BC0 _Ch.384 y(transversal) Communication System: CDMA_Tri_BC0&10, Frequency: 836.52 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_384/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 43.7 dB ABM1 comp = -7.52 dB A/m BWC Factor = 0.155041 dB Location: -2.5, -25, 3.7 mm General Scans_384/y (transversal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 45.0 dB ABM1 comp = -8.98 dB A/m BWC Factor = 0.155041 dB Location: -5.4, -29, 3.7 mm 0 dB = 153.2 © 2013 Comptest Services LLC Page 7 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_CELL-BC0_Ch. 777 z(axial) Communication System: CDMA_Tri_BC0&10, Frequency: 848.31 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_777/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 56.0 dB ABM1 comp = 5.47 dB A/m BWC Factor = 0.155979 dB Location: 0.4, -17.9, 3.7 mm General Scans_777/z (axial) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 56.4 dB ABM1 comp = 5.60 dB A/m BWC Factor = 0.155979 dB Location: 0.4, -20.7, 3.7 mm 0 dB = 631.3 © 2013 Comptest Services LLC Page 8 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_CELL- BC0_Ch. 777 x(longitudinal) Communication System: CDMA_Tri_BC0&10, Frequency: 848.31 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_777/x (longitudinal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 45.0 dB ABM1 comp = -2.89 dB A/m BWC Factor = 0.155979 dB Location: -8.7, -21.3, 3.7 mm General Scans_777/x (longitudinal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 45.0 dB ABM1 comp = -2.80 dB A/m BWC Factor = 0.155979 dB Location: -8.5, -21.2, 3.7 mm 0 dB = 177.5 © 2013 Comptest Services LLC Page 9 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_CELL- BC0_Ch. 777 y(transveral) Communication System: CDMA_Tri_BC0&10, Frequency: 848.31 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_777/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 44.6 dB ABM1 comp = -5.63 dB A/m BWC Factor = 0.155979 dB Location: -3.7, -25, 3.7 mm General Scans_777/y (transversal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 44.2 dB ABM1 comp = -4.01 dB A/m BWC Factor = 0.155979 dB Location: -0.2, -27.2, 3.7 mm 0 dB = 169.6 © 2013 Comptest Services LLC Page 10 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 CELL-BC10 © 2013 Comptest Services LLC Page 11 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_CELL-BC10_Ch. 476 z(axial) Communication System: CDMA_Tri_BC0&10, Frequency: 817.9 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_476/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 56.2 dB ABM1 comp = 3.98 dB A/m BWC Factor = 0.155979 dB Location: 0.8, -17.9, 3.7 mm General Scans_476/z (axial) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 56.8 dB ABM1 comp = 4.17 dB A/m BWC Factor = 0.155979 dB Location: 1.8, -18.7, 3.7 mm 0 dB = 648.9 © 2013 Comptest Services LLC Page 12 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_CELL-BC10_Ch. 476 x(longitudinal) Communication System: CDMA_Tri_BC0&10, Frequency: 817.9 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_476/x (longitudinal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 45.2 dB ABM1 comp = -5.14 dB A/m BWC Factor = 0.155979 dB Location: -8.7, -21.3, 3.7 mm General Scans_476/x (longitudinal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 45.3 dB ABM1 comp = -5.02 dB A/m BWC Factor = 0.155979 dB Location: -8.5, -21.2, 3.7 mm 0 dB = 182.4 © 2013 Comptest Services LLC Page 13 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_CELL-BC10_Ch. 476 y(transveral) Communication System: CDMA_Tri_BC0&10, Frequency: 817.9 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_476/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 43.0 dB ABM1 comp = -7.47 dB A/m BWC Factor = 0.155979 dB Location: -1.2, -25, 3.7 mm General Scans_476/y (transversal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 44.4 dB ABM1 comp = -6.63 dB A/m BWC Factor = 0.155979 dB Location: -1, -27, 3.7 mm 0 dB = 140.9 © 2013 Comptest Services LLC Page 14 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_CELL-BC10_Ch. 580 z(axial) Communication System: CDMA_Tri_BC0&10, Frequency: 820.5 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_580/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 56.0 dB ABM1 comp = 3.72 dB A/m BWC Factor = 0.155041 dB Location: 2.1, -17.5, 3.7 mm General Scans_580/z (axial) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 57.6 dB ABM1 comp = 4.63 dB A/m BWC Factor = 0.155041 dB Location: 1.8, -18.1, 3.7 mm 0 dB = 632.8 © 2013 Comptest Services LLC Page 15 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_CELL-BC10_Ch. 580 x(longitudinal) Communication System: CDMA_Tri_BC0&10, Frequency: 820.5 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_580/x (longitudinal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 45.2 dB ABM1 comp = -7.58 dB A/m BWC Factor = 0.155041 dB Location: -11.7, -20.4, 3.7 mm General Scans_580/x (longitudinal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 46.3 dB ABM1 comp = -4.65 dB A/m BWC Factor = 0.155041 dB Location: -8.5, -20.4, 3.7 mm 0 dB = 182.1 © 2013 Comptest Services LLC Page 16 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_CELL-BC10_Ch. 580 y(transveral) Communication System: CDMA_Tri_BC0&10, Frequency: 820.5 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_580/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 44.9 dB ABM1 comp = -6.70 dB A/m BWC Factor = 0.155041 dB Location: -1.7, -25, 3.7 mm General Scans_580/y (transversal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 45.0 dB ABM1 comp = -7.64 dB A/m BWC Factor = 0.155041 dB Location: -2.8, -25.4, 3.7 mm 0 dB = 175.6 © 2013 Comptest Services LLC Page 17 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_CELL-BC10_Ch. 684 z(axial) Communication System: CDMA_Tri_BC0&10, Frequency: 823.1 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_684/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 57.8 dB ABM1 comp = 5.49 dB A/m BWC Factor = 0.155041 dB Location: 0.4, -16.7, 3.7 mm General Scans_684/z (axial) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 57.6 dB ABM1 comp = 5.14 dB A/m BWC Factor = 0.155041 dB Location: 1.8, -18.3, 3.7 mm 0 dB = 776.6 © 2013 Comptest Services LLC Page 18 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_CELL-BC10_Ch. 684 x(longitudinal) Communication System: CDMA_Tri_BC0&10, Frequency: 823.1 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_684/x (longitudinal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 45.2 dB ABM1 comp = -5.93 dB A/m BWC Factor = 0.155041 dB Location: -10.4, -20.8, 3.7 mm General Scans_684/x (longitudinal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 45.0 dB ABM1 comp = -6.61 dB A/m BWC Factor = 0.155041 dB Location: -11.5, -21, 3.7 mm 0 dB = 181.0 © 2013 Comptest Services LLC Page 19 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_CELL-BC10_Ch. 684 y(transveral) Communication System: CDMA_Tri_BC0&10, Frequency: 823.1 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_684/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 44.1 dB ABM1 comp = -7.77 dB A/m BWC Factor = 0.155041 dB Location: -3.7, -25, 3.7 mm General Scans_684/y (transversal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 45.3 dB ABM1 comp = -6.19 dB A/m BWC Factor = 0.155041 dB Location: -2.8, -25.4, 3.7 mm 0 dB = 159.5 © 2013 Comptest Services LLC Page 20 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 PCS © 2013 Comptest Services LLC Page 21 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_PCS_Ch. 25 z(axial) Communication System: CDMA-1900, Frequency: 1851.25 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_25/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 55.8 dB ABM1 comp = 4.24 dB A/m BWC Factor = 0.155041 dB Location: 2.9, -19.6, 3.7 mm General Scans_25/z (axial) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 56.8 dB ABM1 comp = 4.59 dB A/m BWC Factor = 0.155041 dB Location: 2, -19.4, 3.7 mm 0 dB = 615.2 © 2013 Comptest Services LLC Page 22 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_PCS_ Ch. 25 x(longitudinal) Communication System: CDMA-1900, Frequency: 1851.25 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_25/x (longitudinal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 44.0 dB ABM1 comp = -5.60 dB A/m BWC Factor = 0.155041 dB Location: -9.2, -21.7, 3.7 mm General Scans_25/x (longitudinal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 44.2 dB ABM1 comp = -6.16 dB A/m BWC Factor = 0.155041 dB Location: -8.3, -24.8, 3.7 mm 0 dB = 157.8 © 2013 Comptest Services LLC Page 23 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_PCS_ Ch. 25 y(transversal) Communication System: CDMA-1900, Frequency: 1851.25 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_25/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 43.7 dB ABM1 comp = -7.46 dB A/m BWC Factor = 0.155041 dB Location: -3.3, -25, 3.7 mm General Scans_25/y (transversal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 43.9 dB ABM1 comp = -6.96 dB A/m BWC Factor = 0.155041 dB Location: -2.4, -26, 3.7 mm 0 dB = 153.9 © 2013 Comptest Services LLC Page 24 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_PCS Ch. 600 z(axial) Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_600/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 56.6 dB ABM1 comp = 3.55 dB A/m BWC Factor = 0.155979 dB Location: 0.8, -17.9, 3.7 mm General Scans_600/z (axial) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 56.7 dB ABM1 comp = 3.67 dB A/m BWC Factor = 0.155979 dB Location: 2.4, -20.7, 3.7 mm 0 dB = 674.0 © 2013 Comptest Services LLC Page 25 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_PCS Ch. 600 x (longitudinal) Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_600/x (longitudinal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 43.8 dB ABM1 comp = -9.85 dB A/m BWC Factor = 0.155979 dB Location: -11.7, -25, 3.7 mm General Scans_600/x (longitudinal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 45.1 dB ABM1 comp = -7.28 dB A/m BWC Factor = 0.155979 dB Location: -11.1, -21, 3.7 mm 0 dB = 154.9 © 2013 Comptest Services LLC Page 26 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_PCS_ Ch. 600 y(transversal) Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_600/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 44.7 dB ABM1 comp = -6.08 dB A/m BWC Factor = 0.155979 dB Location: -1.2, -25, 3.7 mm General Scans_600/y (transversal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155979 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 45.4 dB ABM1 comp = -7.80 dB A/m BWC Factor = 0.155979 dB Location: -4, -26.8, 3.7 mm 0 dB = 172.4 © 2013 Comptest Services LLC Page 27 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_PCS_ Ch.1175 z(axial) Communication System: CDMA-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_1175/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 56.0 dB ABM1 comp = 3.22 dB A/m BWC Factor = 0.155041 dB Location: 0.4, -18.3, 3.7 mm General Scans_1175/z (axial) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 56.9 dB ABM1 comp = 4.28 dB A/m BWC Factor = 0.155041 dB Location: 1.6, -18.9, 3.7 mm 0 dB = 629.9 © 2013 Comptest Services LLC Page 28 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_PCS _Ch. 1175 x(longitudinal) Communication System: CDMA-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_1175/x (longitudinal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 44.8 dB ABM1 comp = -7.08 dB A/m BWC Factor = 0.155041 dB Location: -10, -25, 3.7 mm General Scans_1175/x (longitudinal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 45.7 dB ABM1 comp = -5.31 dB A/m BWC Factor = 0.155041 dB Location: -9.7, -22.6, 3.7 mm 0 dB = 174.6 © 2013 Comptest Services LLC Page 29 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5215 Report #: CT-C5215-13C-0313-R0 Test Laboratory: COMPTEST/KYOCERA Date: 03/13/2013 FCC_ C5215_TCoil_PCS_ Ch. 1175 y(transversal) Communication System: CDMA-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1 3 Medium: T-Coil,Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m Phantom: HAC Test Arch with AMCC,Phantom section: TCoil Section DASY4 Configuration: Probe: AM1DV2 - 1045, , Calibrated: 9/20/2012 Sensor-Surface: 0mm (Fix Surface), Electronics: DAE4 Sn527,Calibrated: 7/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 General Scans_1175/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 44.6 dB ABM1 comp = -8.02 dB A/m BWC Factor = 0.155041 dB Location: -5, -25, 3.7 mm General Scans_1175/y (transversal) fine 2mm 8 x 8/ABM Interpolated SNR(x,y,z) (41x41x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav BWC applied: 0.155041 dB Device Reference Point: 0.000, 0.000, -6.30 mm Cursor: ABM1/ABM2 = 44.7 dB ABM1 comp = -7.82 dB A/m BWC Factor = 0.155041 dB Location: -4, -27.2, 3.7 mm 0 dB = 169.2 © 2013 Comptest Services LLC Page 30 of 30 HAC T-coil Plot This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


Document Created: 2013-04-22 13:25:43
Document Modified: 2013-04-22 13:25:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC