SAR plots body-hotspot

FCC ID: V65C5215

RF Exposure Info

Download: PDF
FCCID_1969277

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 EXHIBIT 9 APPENDIX B3: SAR DISTRIBUTION PLOTS (HOTSPOT) CELL – BC0 © 2013 Comptest Services LLC Page 1 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC C5215 CDMA-800 BC-0 Flat with 1cm Air Space, Front Ch. 1013 Communication System: CDMA-800, Frequency: 824.7 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 824.7 MHz; σ = 0.96 mho/m; εr = 53.8; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-800 FLAT - Front Ch1013/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.697 mW/g CDMA-800 FLAT - Front Ch1013/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 26.3 V/m; Power Drift = -0.068 dB Peak SAR (extrapolated) = 0.829 W/kg SAR(1 g) = 0.647 mW/g; SAR(10 g) = 0.489 mW/g Maximum value of SAR (measured) = 0.684 mW/g 0 dB = 0.697mW/g © 2013 Comptest Services LLC Page 2 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC C5215 CDMA-800 BC-0 Flat with 1cm Air Space, Back Ch. 1013 Communication System: CDMA-800, Frequency: 824.7 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 824.7 MHz; σ = 0.96 mho/m; εr = 53.8; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-800 FLAT Back Ch1013/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.19 mW/g CDMA-800 FLAT Back Ch1013/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 30.9 V/m; Power Drift = 0.073 dB Peak SAR (extrapolated) = 1.50 W/kg SAR(1 g) = 1.12 mW/g; SAR(10 g) = 0.816 mW/g Maximum value of SAR (measured) = 1.19 mW/g CDMA-800 FLAT Back Ch1013/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 30.9 V/m; Power Drift = 0.073 dB Peak SAR (extrapolated) = 1.42 W/kg SAR(1 g) = 0.777 mW/g; SAR(10 g) = 0.498 mW/g Maximum value of SAR (measured) = 1.01 mW/g 0 dB = 1.19mW/g © 2013 Comptest Services LLC Page 3 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x,y,z,f0) SAR; Z Scan:Value Along Z, X=0, Y=0 1.1 1.0 0.9 0.8 0.7 / 0.3 0.2 0.1 —0.0

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC C5215 CDMA-800 BC-0 Flat with 1cm Air Space, Back Ch. 384 Communication System: CDMA-800, Frequency: 836.52 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.96 mho/m; εr = 53.8; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-800 FLAT - Back Ch384/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.14 mW/g CDMA-800 FLAT - Back Ch384/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 30.9 V/m; Power Drift = -0.112 dB Peak SAR (extrapolated) = 1.39 W/kg SAR(1 g) = 1.06 mW/g; SAR(10 g) = 0.775 mW/g Maximum value of SAR (measured) = 1.13 mW/g CDMA-800 FLAT - Back Ch384/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 30.9 V/m; Power Drift = -0.112 dB Peak SAR (extrapolated) = 1.44 W/kg SAR(1 g) = 0.811 mW/g; SAR(10 g) = 0.466 mW/g Maximum value of SAR (measured) = 0.907 mW/g 0 dB = 1.14mW/g © 2013 Comptest Services LLC Page 5 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC C5215 CDMA-800 BC-0 Flat with 1cm Air Space, Back Ch. 777 Communication System: CDMA-800, Frequency: 848.31 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 848.31 MHz; σ = 0.96 mho/m; ε r = 53.8; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-800 FLAT - Back Ch777/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.06 mW/g CDMA-800 FLAT - Back Ch777/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 30.4 V/m; Power Drift = -0.109 dB Peak SAR (extrapolated) = 1.25 W/kg SAR(1 g) = 0.968 mW/g; SAR(10 g) = 0.713 mW/g Maximum value of SAR (measured) = 1.03 mW/g CDMA-800 FLAT - Back Ch777/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 30.4 V/m; Power Drift = -0.109 dB Peak SAR (extrapolated) = 1.46 W/kg SAR(1 g) = 0.805 mW/g; SAR(10 g) = 0.448 mW/g Maximum value of SAR (measured) = 0.878 mW/g 0 dB = 1.06mW/g © 2013 Comptest Services LLC Page 6 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC C5215 CDMA-800 BC-0 Flat with 1cm Air Space, Left Ch. 1013 Communication System: CDMA-800, Frequency: 824.7 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 824.7 MHz; σ = 0.95 mho/m; εr = 54.1; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 Cell Ch1013 FLAT -Left/Area Scan (91x41x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.576 mW/g Cell Ch1013 FLAT -Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 24.3 V/m; Power Drift = -0.009 dB Peak SAR (extrapolated) = 0.738 W/kg SAR(1 g) = 0.535 mW/g; SAR(10 g) = 0.372 mW/g Maximum value of SAR (measured) = 0.571 mW/g 0 dB = 0.576mW/g © 2013 Comptest Services LLC Page 7 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x,y,z,f0) SAR; Z Scan:Value Along Z, X=0, Y=0 sel—} al |® al [\ -/ mWi/g I O C 0.0 42— o4 —, [' "l riee eprcerepreabrordaiebuepertrtete Onreusmy nuimp enairvaarre ererirons perreuin on e orriper ous evrrreve ce _ 1

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC C5215 CDMA-800 BC-0 Flat with 1cm Air Space, Right Ch. 1013 Communication System: CDMA-800, Frequency: 824.7 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 824.7 MHz; σ = 0.95 mho/m; εr = 54.1; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 Cell Ch1013 FLAT - Right/Area Scan (91x41x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.695 mW/g Cell Ch1013 FLAT - Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 27.3 V/m; Power Drift = -0.071 dB Peak SAR (extrapolated) = 0.857 W/kg SAR(1 g) = 0.636 mW/g; SAR(10 g) = 0.450 mW/g Maximum value of SAR (measured) = 0.676 mW/g 0 dB = 0.695mW/g © 2013 Comptest Services LLC Page 9 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC C5215 CDMA-800 BC-0 Flat with 1cm Air Space, Bottom Ch. 1013 Communication System: CDMA-800, Frequency: 824.7 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 824.7 MHz; σ = 0.95 mho/m; εr = 54.1; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CELL Ch1013 FLAT -Bottom/Area Scan (71x41x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.166 mW/g CELL Ch1013 FLAT -Bottom/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.2 V/m; Power Drift = 0.173 dB Peak SAR (extrapolated) = 0.244 W/kg SAR(1 g) = 0.148 mW/g; SAR(10 g) = 0.087 mW/g Maximum value of SAR (measured) = 0.162 mW/g 0 dB = 0.166mW/g © 2013 Comptest Services LLC Page 10 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 CELL - BC10 © 2013 Comptest Services LLC Page 11 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC C5215 CDMA-800 BC-10 Flat with 1cm Air Space, Front Ch. 476 Communication System: Cell BC-10 , Frequency: 820.5 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 820.5 MHz; σ = 0.96 mho/m; εr = 53.8; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C CDMA-800 FLAT - Front Ch580/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.702 mW/g CDMA-800 FLAT - Front Ch580/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 26.6 V/m; Power Drift = -0.098 dB Peak SAR (extrapolated) = 0.861 W/kg SAR(1 g) = 0.663 mW/g; SAR(10 g) = 0.493 mW/g Maximum value of SAR (measured) = 0.697 mW/g 0 dB = 0.702mW/g © 2013 Comptest Services LLC Page 12 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC C5215 CDMA-800 BC-10 Flat with 1cm Air Space, Back Ch. 476 Communication System: Cell BC-10 , Frequency: 817.9 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 817.9 MHz; σ = 0.96 mho/m; εr = 53.8; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-800 FLAT Back Ch476/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.13 mW/g CDMA-800 FLAT Back Ch476/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 29.9 V/m; Power Drift = 0.024 dB Peak SAR (extrapolated) = 1.45 W/kg SAR(1 g) = 1.09 mW/g; SAR(10 g) = 0.790 mW/g Maximum value of SAR (measured) = 1.15 mW/g CDMA-800 FLAT Back Ch476/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 29.9 V/m; Power Drift = 0.024 dB Peak SAR (extrapolated) = 1.26 W/kg SAR(1 g) = 0.739 mW/g; SAR(10 g) = 0.452 mW/g Maximum value of SAR (measured) = 0.802 mW/g 0 dB = 1.13mW/g © 2013 Comptest Services LLC Page 13 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC C5215 CDMA-800 BC-10 Flat with 1cm Air Space, Back Ch. 580 Communication System: Cell BC-10 , Frequency: 820.5 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 820.5 MHz; σ = 0.96 mho/m; εr = 53.8; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-800 FLAT - Back Ch580/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.16 mW/g CDMA-800 FLAT - Back Ch580/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 30.6 V/m; Power Drift = -0.162 dB Peak SAR (extrapolated) = 1.48 W/kg SAR(1 g) = 1.11 mW/g; SAR(10 g) = 0.802 mW/g Maximum value of SAR (measured) = 1.18 mW/g CDMA-800 FLAT - Back Ch580/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 30.6 V/m; Power Drift = -0.162 dB Peak SAR (extrapolated) = 1.27 W/kg SAR(1 g) = 0.741 mW/g; SAR(10 g) = 0.452 mW/g Maximum value of SAR (measured) = 0.805 mW/g 0 dB = 1.16mW/g © 2013 Comptest Services LLC Page 14 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x,y,z,f0) SAR; Z Scan:Value Along Z, X=0, Y=0 T PPETT PPE n eE mWi/g [«=] in / Eon EJ [' "l riee eprcerepreabrordaiebuepertrtete enreues fe nanpenairearuieerrrirons perreuin on e vrriper ous evrrreve ce _ 1

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC C5215 CDMA-800 BC-10 Flat with 1cm Air Space, Back Ch. 684 Communication System: Cell BC-10 , Frequency: 823.1 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 823.1 MHz; σ = 0.96 mho/m; εr = 53.8; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-800 FLAT Back Ch684/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.24 mW/g CDMA-800 FLAT Back Ch684/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 31.7 V/m; Power Drift = -0.175 dB Peak SAR (extrapolated) = 1.53 W/kg SAR(1 g) = 1.15 mW/g; SAR(10 g) = 0.833 mW/g Maximum value of SAR (measured) = 1.21 mW/g CDMA-800 FLAT Back Ch684/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 31.7 V/m; Power Drift = -0.175 dB Peak SAR (extrapolated) = 1.46 W/kg SAR(1 g) = 0.788 mW/g; SAR(10 g) = 0.505 mW/g Maximum value of SAR (measured) = 1.04 mW/g 0 dB = 1.24mW/g © 2013 Comptest Services LLC Page 16 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC C5215 CDMA-800 BC-10 Flat with 1cm Air Space, Left Ch. 580 Communication System: Cell BC-10 , Frequency: 820.5 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 820.5 MHz; σ = 0.95 mho/m; εr = 54.1; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 Cell Ch580 FLAT -Left/Area Scan (91x41x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.542 mW/g Cell Ch580 FLAT -Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 23.4 V/m; Power Drift = 0.002 dB Peak SAR (extrapolated) = 0.684 W/kg SAR(1 g) = 0.498 mW/g; SAR(10 g) = 0.348 mW/g Maximum value of SAR (measured) = 0.531 mW/g 0 dB = 0.542mW/g © 2013 Comptest Services LLC Page 17 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC C5215 CDMA-800 BC-10 Flat with 1cm Air Space, Right Ch. 580 Communication System: Cell BC-10 , Frequency: 820.5 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 820.5 MHz; σ = 0.95 mho/m; εr = 54.1; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 Cell Ch580 FLAT - Right/Area Scan (91x41x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.673 mW/g Cell Ch580 FLAT - Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 27.1 V/m; Power Drift = -0.128 dB Peak SAR (extrapolated) = 0.862 W/kg SAR(1 g) = 0.628 mW/g; SAR(10 g) = 0.445 mW/g Maximum value of SAR (measured) = 0.671 mW/g 0 dB = 0.673mW/g © 2013 Comptest Services LLC Page 18 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/14/2013 FCC C5215 CDMA-800 BC-10 Flat with 1cm Air Space, Bottom Ch. 580 Communication System: Cell BC-10 , Frequency: 820.5 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 820.5 MHz; σ = 0.95 mho/m; εr = 54.1; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.83, 5.83, 5.83), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CELL Ch580 FLAT -Bottom/Area Scan (71x41x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.169 mW/g CELL Ch580 FLAT -Bottom/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.7 V/m; Power Drift = -0.185 dB Peak SAR (extrapolated) = 0.244 W/kg SAR(1 g) = 0.149 mW/g; SAR(10 g) = 0.088 mW/g Maximum value of SAR (measured) = 0.164 mW/g 0 dB = 0.169mW/g © 2013 Comptest Services LLC Page 19 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 PCS © 2013 Comptest Services LLC Page 20 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/21/2013 FCC C5215 PCS Flat with 1cm Air Space, Front Ch. 1175 Communication System: CDMA-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1 Medium: M1800,Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.55 mho/m; εr = 51.8; ρ = 1000 3 kg/m Phantom: SAM_4,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(4.42, 4.42, 4.42), Calibrated: 9/13/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-1900 FLAT - Face Up Ch1175/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.845 mW/g CDMA-1900 FLAT - Face Up Ch1175/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.5 V/m; Power Drift = -0.188 dB Peak SAR (extrapolated) = 0.988 W/kg SAR(1 g) = 0.734 mW/g; SAR(10 g) = 0.479 mW/g Maximum value of SAR (measured) = 0.793 mW/g 0 dB = 0.845mW/g © 2013 Comptest Services LLC Page 21 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/212013 FCC C5215 PCS Flat with 1cm Air Space, Back Ch. 1175 Communication System: CDMA-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1 Medium: M1800,Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.55 mho/m; εr = 51.8; ρ = 1000 3 kg/m Phantom: SAM_4,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(4.42, 4.42, 4.42), Calibrated: 9/13/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 CDMA-1900 FLAT Face Down Ch1175/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.695 mW/g CDMA-1900 FLAT Face Down Ch1175/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.7 V/m; Power Drift = -0.096 dB Peak SAR (extrapolated) = 0.857 W/kg SAR(1 g) = 0.630 mW/g; SAR(10 g) = 0.422 mW/g Maximum value of SAR (measured) = 0.678 mW/g 0 dB = 0.695mW/g © 2013 Comptest Services LLC Page 22 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x,y,z,f0) SAR; Z Scan:Value Along Z, X=0, Y=0 0.18 0. 16 0.14 0.12 mWi/g 0.04 0.02 0.00 wes n vencaper h ns wever n rurnene eneane s =

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/21/2013 FCC C5215 PCS Flat with 1cm Air Space, Left Ch. 1175 Communication System: PCS-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1 Medium: M1800,Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.55 mho/m; ε r = 51.8; ρ = 1000 3 kg/m Phantom: SAM_4,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(4.42, 4.42, 4.42), Calibrated: 9/13/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 PCS Ch1175 FLAT -Left/Area Scan (91x41x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.658 mW/g PCS Ch1175 FLAT -Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 21.4 V/m; Power Drift = -0.070 dB Peak SAR (extrapolated) = 0.823 W/kg SAR(1 g) = 0.589 mW/g; SAR(10 g) = 0.371 mW/g Maximum value of SAR (measured) = 0.640 mW/g 0 dB = 0.658mW/g © 2013 Comptest Services LLC Page 24 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/212013 FCC C5215 PCS Flat with 1cm Air Space, Right Ch. 1175 Communication System: PCS-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1 Medium: M1800,Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.55 mho/m; εr = 51.8; ρ = 1000 3 kg/m Phantom: SAM_4,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(4.42, 4.42, 4.42), Calibrated: 9/13/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 PCS Ch1175 FLAT - Right/Area Scan (91x41x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.126 mW/g PCS Ch1175 FLAT - Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.80 V/m; Power Drift = -0.004 dB Peak SAR (extrapolated) = 0.160 W/kg SAR(1 g) = 0.116 mW/g; SAR(10 g) = 0.074 mW/g Maximum value of SAR (measured) = 0.125 mW/g PCS Ch1175 FLAT - Right/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.80 V/m; Power Drift = -0.004 dB Peak SAR (extrapolated) = 0.151 W/kg SAR(1 g) = 0.109 mW/g; SAR(10 g) = 0.071 mW/g Maximum value of SAR (measured) = 0.119 mW/g 0 dB = 0.126mW/g © 2013 Comptest Services LLC Page 25 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 03/212013 FCC C5215 PCS Flat with 1cm Air Space, Bottom Ch. 1175 Communication System: PCS-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1 Medium: M1800,Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.55 mho/m; ε r = 51.8; ρ = 1000 3 kg/m Phantom: SAM_4,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(4.44, 4.44, 4.44), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/30/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 22.0 PCS Ch1175 FLAT -Bottom/Area Scan (71x41x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.617 mW/g PCS Ch1175 FLAT -Bottom/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.2 V/m; Power Drift = -0.064 dB Peak SAR (extrapolated) = 0.845 W/kg SAR(1 g) = 0.520 mW/g; SAR(10 g) = 0.304 mW/g Maximum value of SAR (measured) = 0.570 mW/g 0 dB = 0.617mW/g © 2013 Comptest Services LLC Page 26 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 WIFI © 2013 Comptest Services LLC Page 27 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 04/02/2013 FCC C5215 WIFI Flat with 1cm Air Space, Front Ch. 6 Communication System: WLAN-2450, Frequency: 2437 MHz, Duty Cycle: 1:1 3 Medium: M2450,Medium parameters used: f = 2400 MHz; σ = 1.96 mho/m; εr = 51.8; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.09, 4.09, 4.09), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C 802.11b 1Mbps ch6 Face UP/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.041 mW/g 802.11b 1Mbps ch6 Face UP/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0.649 V/m; Power Drift = 0.007 dB Peak SAR (extrapolated) = 0.073 W/kg SAR(1 g) = 0.038 mW/g; SAR(10 g) = 0.021 mW/g Maximum value of SAR (measured) = 0.042 mW/g 802.11b 1Mbps ch6 Face UP/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0.649 V/m; Power Drift = 0.007 dB Peak SAR (extrapolated) = 0.072 W/kg SAR(1 g) = 0.034 mW/g; SAR(10 g) = 0.018 mW/g Maximum value of SAR (measured) = 0.037 mW/g 0 dB = 0.041mW/g © 2013 Comptest Services LLC Page 28 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 04/02/2013 FCC C5215 WIFI Flat with 1cm Air Space, Back Ch. 6 Communication System: WLAN-2450, Frequency: 2437 MHz, Duty Cycle: 1:1 3 Medium: M2450,Medium parameters used: f = 2400 MHz; σ = 1.96 mho/m; εr = 51.8; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.09, 4.09, 4.09), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C 802.11b 1Mbps ch6 Face DOWN/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.237 mW/g 802.11b 1Mbps ch6 Face DOWN/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.65 V/m; Power Drift = -0.047 dB Peak SAR (extrapolated) = 0.492 W/kg SAR(1 g) = 0.213 mW/g; SAR(10 g) = 0.093 mW/g Maximum value of SAR (measured) = 0.249 mW/g 0 dB = 0.237mW/g © 2013 Comptest Services LLC Page 29 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x,y,z,f0) SAR; Z Scan:Value Along Z, X=0, Y=0 0.30 + TT TT 0.25 _ |_&a—+*+** 0.20 OTOT P mWi/g o n / O P PP 0.10 / 0.05 \ m 1L__| 1 1 1L__| 1 1L__| 1 1 1 1 I I I 1L__| L__L__ 1 1L__| 0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 m [' "l riee eprceeeprearordaiebuepertrtete errvefur fe eneaireuesrireerniibors pereuin on e uriipe e vun evrreve eeen _ 1

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date: 04/03/2013 FCC C5215 WIFI Flat with 1cm Air Space, Left Ch. 6 Communication System: WLAN-2450, Frequency: 2437 MHz, Duty Cycle: 1:1 3 Medium: M2450,Medium parameters used: f = 2400 MHz; σ = 1.94 mho/m; εr = 51.9; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.09, 4.09, 4.09), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C WLAN Ch6 FLAT - Left/Area Scan (101x41x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.008 mW/g WLAN Ch6 FLAT - Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.73 V/m; Power Drift = -0.067 dB Peak SAR (extrapolated) = 0.016 W/kg SAR(1 g) = 0.00828 mW/g; SAR(10 g) = 0.00416 mW/g Maximum value of SAR (measured) = 0.010 mW/g WLAN Ch6 FLAT - Left/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.73 V/m; Power Drift = -0.067 dB Peak SAR (extrapolated) = 0.010 W/kg SAR(1 g) = 0.00579 mW/g; SAR(10 g) = 0.00286 mW/g Maximum value of SAR (measured) = 0.007 mW/g 0 dB = 0.010mW/g © 2013 Comptest Services LLC Page 31 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65C5215 Report #: CT- C5215-9B3-0313-R0 Test Laboratory: Comptest/Kyocera Date:04/03/2013 FCC C5215 WIFI Flat with 1cm Air Space, Top Ch. 6 Communication System: WLAN-2450, Frequency: 2437 MHz, Duty Cycle: 1:1 3 Medium: M2450,Medium parameters used: f = 2400 MHz; σ = 1.94 mho/m; εr = 51.9; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.09, 4.09, 4.09), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/12/2012 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C WLAN Ch6 FLAT -Top/Area Scan (61x41x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.034 mW/g WLAN Ch6 FLAT -Top/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.91 V/m; Power Drift = 0.173 dB Peak SAR (extrapolated) = 0.055 W/kg SAR(1 g) = 0.030 mW/g; SAR(10 g) = 0.017 mW/g Maximum value of SAR (measured) = 0.033 mW/g 0 dB = 0.034mW/g © 2013 Comptest Services LLC Page 32 of 32 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


Document Created: 2013-04-08 15:25:20
Document Modified: 2013-04-08 15:25:20
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC