SAR Plots Body

FCC ID: V65C5170

RF Exposure Info

Download: PDF
FCCID_1701065

Applicant Kyocera FCC ID: V65C5170 Report #: CT-C5170-9B2-0212-R0 EXHIBIT 9 APPENDIX B2: SAR DISTRIBUTION PLOTS (BODY) PCS © 2012 Comptest Services LLC Page 1 of 8 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID: V65C5170 Report #: CT-C5170-9B2-0212-R0 Test Laboratory: Comptest/Kyocera Date: 02/28/2012 FCC C5170 PCS Flat with 15mm Air Space, Face Down Ch. 600 Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 Medium: M1900,Medium parameters used: f = 1880 MHz; σ = 1.53 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3078, ConvF(4.49, 4.49, 4.49), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C CDMA-1900 FLAT - Face Down Ch600/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.631 mW/g CDMA-1900 FLAT - Face Down Ch600/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.1 V/m; Power Drift = -0.024 dB Peak SAR (extrapolated) = 0.947 W/kg SAR(1 g) = 0.583 mW/g; SAR(10 g) = 0.358 mW/g Maximum value of SAR (measured) = 0.632 mW/g 0 dB = 0.631mW/g © 2012 Comptest Services LLC Page 2 of 8 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST C Services LLC SAR(x.y.z.f0) SAR; Z Scan: Value Along Z, X=0, Y=0 20.08 — \ 0.04 — \ 0.02 — 0_007 1 i1 _ m*w i i i i 1—el.al |ools al ul ol 0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16

Applicant Kyocera FCC ID: V65C5170 Report #: CT-C5170-9B2-0212-R0 Test Laboratory: Comptest/Kyocera Date: 02/28/2012 FCC C5170 PCS Flat with 15mm Air Space, Face Up Ch. 600 Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 Medium: M1900,Medium parameters used: f = 1880 MHz; σ = 1.53 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3078, ConvF(4.49, 4.49, 4.49), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C CDMA-1900 FLAT - Face Up Ch600/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.421 mW/g CDMA-1900 FLAT - Face Up Ch600/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.78 V/m; Power Drift = 0.003 dB Peak SAR (extrapolated) = 0.595 W/kg SAR(1 g) = 0.380 mW/g; SAR(10 g) = 0.237 mW/g Maximum value of SAR (measured) = 0.409 mW/g 0 dB = 0.421mW/g © 2012 Comptest Services LLC Page 4 of 8 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID: V65C5170 Report #: CT-C5170-9B2-0212-R0 WLAN © 2012 Comptest Services LLC Page 5 of 8 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID: V65C5170 Report #: CT-C5170-9B2-0212-R0 Test Laboratory: Comptest/Kyocera Date: 05/15/2012 FCC C5170 WLAN Flat with 15mm Air Space, Face Down Ch. 11 Communication System: WLAN-2450, Frequency: 2462 MHz, Duty Cycle: 1:1 Medium: M2450,Medium parameters used: f = 2500 MHz; σ = 2.01 mho/m; εr = 51; ρ = 1000 kg/m3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3078, ConvF(4.16, 4.16, 4.16), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature:Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C Ch 2450 ch11 Face DOWN/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.037 mW/g Ch 2450 ch11 Face DOWN/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.06 V/m; Power Drift = -0.076 dB Peak SAR (extrapolated) = 0.046 W/kg SAR(1 g) = 0.025 mW/g; SAR(10 g) = 0.013 mW/g Maximum value of SAR (measured) = 0.027 mW/g Ch 2450 ch11 Face DOWN/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.06 V/m; Power Drift = -0.076 dB Peak SAR (extrapolated) = 0.041 W/kg SAR(1 g) = 0.022 mW/g; SAR(10 g) = 0.012 mW/g Maximum value of SAR (measured) = 0.024 mW/g 0 dB = 0.024mW/g © 2012 Comptest Services LLC Page 6 of 8 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x,y,z,f0) SAR; Z Scan: Value Along Z, X—0, Y=0 0.030 e mm 0.025 _ |_2e++*] 0.020 a soo15 / E 0.010 0.005 " : ; | f ; 0.000

Applicant Kyocera FCC ID: V65C5170 Report #: CT-C5170-9B2-0212-R0 Test Laboratory: Comptest/Kyocera Date: 02/29/2012 FCC C5170 WiFi Flat with 15mm Air Space, Face Up Ch. 11 Communication System: WLAN-2450, Frequency: 2462 MHz, Duty Cycle: 1:1 Medium: M2450,Medium parameters used: f = 2500 MHz; σ = 2.03 mho/m; εr = 50.3; ρ = 1000 kg/m3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3078, ConvF(4.16, 4.16, 4.16), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C Ch 2450 ch11 Face UP-/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.236 mW/g Ch 2450 ch11 Face UP-/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0.647 V/m; Power Drift = -0.043 dB Peak SAR (extrapolated) = 0.662 W/kg SAR(1 g) = 0.047 mW/g; SAR(10 g) = 0.00778 mW/g Maximum value of SAR (measured) = 0.297 mW/g 0 dB = 0.236mW/g © 2012 Comptest Services LLC Page 8 of 8 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


Document Created: 2012-05-15 17:23:25
Document Modified: 2012-05-15 17:23:25
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC