SAR Validation

FCC ID: V65C5170

RF Exposure Info

Download: PDF
FCCID_1701038

Applicant: Kyocera FCC ID: V65-C5170 IC#: 3572A- C5170 Report #: CT- C5170-9A-0212-R1 EXHIBIT 9 APPENDIX A: SAR VALIDATION PLOTS Validation for HEAD © 2012 Comptest Services LLC Page 1 of 12 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65-C5170 IC#: 3572A- C5170 Report #: CT- C5170-9A-0212-R1 Test Laboratory: Comptest/Kyocera Date: 02/27/2012 1900Mhz Validation @ 20dBm Probe 3036, DAE 675 and Dipole 5d016 Communication System: CW, Frequency: 1900 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used (interpolated): f = 1900 MHz; σ = 1.45 mho/m; ε r = 38.7; ρ = 1000 3 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(5.06, 5.06, 5.06), Calibrated: 5/11/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn675,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C 1900MHz Validation @20dBm/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 4.55 mW/g 1900MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 55.7 V/m; Power Drift = 0.005 dB Peak SAR (extrapolated) = 7.31 W/kg SAR(1 g) = 3.94 mW/g; SAR(10 g) = 2.05 mW/g Maximum value of SAR (measured) = 4.42 mW/g 0 dB = 4.55mW/g © 2012 Comptest Services LLC Page 2 of 12 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST ty < < > > Services LLC SAR(x.y,z,f0) SAR; Z Scan: Value Along Z, X=0, Y=0 4.5 |___——— _'_'_'_'_,_4 TTTT 4.0 T TT T 3.5 |____—— U TT T |____——I Td TT mWig r,,_#“"_‘ ,—/‘. TT TT TT T 1.5 / 1.0 0.5 0.0 0.08 0.10 0.12 0.14 0.16 I hn rive n vepeeve n e ver es frve k n ve n nepr t neveve uen mt uen use pers n e avirp en vr exeves en enz onr e rvvner n wever rerneree wr n vencipee n neves ns =]

Applicant: Kyocera FCC ID: V65-C5170 IC#: 3572A- C5170 Report #: CT- C5170-9A-0212-R1 Test Laboratory: Comptest/Kyocera Date: 04/03/2012 2450MHz Validation, Probe #3078, DAE #530, Dipole #776_040312 Communication System: CW, Frequency: 2450 MHz, Duty Cycle: 1:1 3 Medium: HSL2450,Medium parameters used: f = 2450 MHz; σ = 1.85 mho/m; εr = 37.9; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3078, ConvF(4.36, 4.36, 4.36), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C 2450MHz Validation @20dBm/Area Scan (61x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 7.08 mW/g 2450MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 55.3 V/m; Power Drift = -0.125 dB Peak SAR (extrapolated) = 12.4 W/kg SAR(1 g) = 5.57 mW/g; SAR(10 g) = 2.5 mW/g Maximum value of SAR (measured) = 6.37 mW/g 0 dB = 7.08mW/g © 2012 Comptest Services LLC Page 4 of 12 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x.y,z,f0) SAR; Z Scan: Value Along Z, X=0, Y=0 [' "l riee eprveeepreabrorraieb uepartrtete Oreues ty nuimg erairea arre errrirons uerreuin on e vrriper vusevrreveemen _ W

Applicant: Kyocera FCC ID: V65-C5170 IC#: 3572A- C5170 Report #: CT- C5170-9A-0212-R1 Validation for BODY © 2012 Comptest Services LLC Page 6 of 12 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65-C5170 IC#: 3572A- C5170 Report #: CT- C5170-9A-0212-R1 Test Laboratory: Comptest/Kyocera Date: 02/28/2012 1900MHz Validation (in Muscle), Probe #3078, DAE #530, Dipole #5d016 Communication System: CW, Frequency: 1900 MHz, Duty Cycle: 1:1 3 Medium: M1900,Medium parameters used (interpolated): f = 1900 MHz; σ = 1.53 mho/m; εr = 52.2; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3078, ConvF(4.49, 4.49, 4.49), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C 1900MHz Validation @20dBm/Area Scan (61x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 5.07 mW/g 1900MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 52.8 V/m; Power Drift = 0.025 dB Peak SAR (extrapolated) = 7.42 W/kg SAR(1 g) = 4.11 mW/g; SAR(10 g) = 2.16 mW/g Maximum value of SAR (measured) = 4.65 mW/g 0 dB = 5.07mW/g © 2012 Comptest Services LLC Page 7 of 12 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC SAR(x.y,z,f0) SAR; Z Scan: Value Along Z, X=0, Y=0 4.0 ’\ 3.5 |___————I TT d T 3.0 ___—— TT DJ in fl dEETTOETOTT mWig Do o /‘P___'_,_,_,-o—'"-__" O _z in Or Td _s o |— 0.5 /7 0.0 —|—L—L— 1 _ _ *# ab o ap af ap ap ap ul up ap ap uh up ap ap ib up ub al 0.08 0.10 0.12 0.14 0.16 o o o o o ro o o E o o & [' "l riee eprveeepreabrorraieb uepartrtete Oreues ty naimg erairea arre errrirons uerreuin on e vrriper vusevrreveemen _ W

Applicant: Kyocera FCC ID: V65-C5170 IC#: 3572A- C5170 Report #: CT- C5170-9A-0212-R1 Test Laboratory: Comptest/Kyocera Date: 3/26/2012 1900Mhz Validation (Muscle) @ 20dBm Probe 3036, DAE 675 and Dipole 5d016 Communication System: CW, Frequency: 1900 MHz, Duty Cycle: 1:1 3 Medium: M1800,Medium parameters used (interpolated): f = 1900 MHz; σ = 1.54 mho/m; εr = 51.9; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.57, 4.57, 4.57), Calibrated: 5/11/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn675,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C 1900MHz Validation @20dBm/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 4.91 mW/g 1900MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 54.2 V/m; Power Drift = 0.022 dB Peak SAR (extrapolated) = 7.44 W/kg SAR(1 g) = 4.11 mW/g; SAR(10 g) = 2.15 mW/g Maximum value of SAR (measured) = 4.66 mW/g 0 dB = 4.91mW/g © 2012 Comptest Services LLC Page 9 of 12 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant: Kyocera FCC ID: V65-C5170 IC#: 3572A- C5170 Report #: CT- C5170-9A-0212-R1 Test Laboratory: Comptest/Kyocera Date: 02/29/2012 2450MHz Validation (in Muscle), Probe #3078, DAE #530, Dipole #776 Communication System: CW, Frequency: 2450 MHz, Duty Cycle: 1:1 3 Medium: M2450,Medium parameters used (interpolated): f = 2450 MHz; σ = 2.03 mho/m; εr = 50.3; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3078, ConvF(4.16, 4.16, 4.16), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C 2450MHz Validation @20dBm/Area Scan (61x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 7.17 mW/g 2450MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 52.4 V/m; Power Drift = -0.182 dB Peak SAR (extrapolated) = 12.7 W/kg SAR(1 g) = 5.76 mW/g; SAR(10 g) = 2.59 mW/g Maximum value of SAR (measured) = 6.52 mW/g 0 dB = 7.17mW/g © 2012 Comptest Services LLC Page 10 of 12 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC SAR(x.y,z,f0) SAR; Z Scan: Value Along Z, X=0, Y=0 5.5 TTTTJTETTpTTT T 5.0 |___—_— sot 4.5 |__—— TTTT 3.5 3.0 mWig 2.5 2.0 1.5 1.0 0.5 0.0 |——L—— N‘P‘——M_A-AA---|-|A|--|-|A|--|A|---|-|A| 0.06 0.08 0.10 0.12 0.14 0.16 o o o O o ro O o K m [' "l riee eprveepreabrorraieb uepartrtete Oreues fe nenairoareuieerriirons uerreuin on e vrriper vusevrreveemen _ 1

Applicant: Kyocera FCC ID: V65-C5170 IC#: 3572A- C5170 Report #: CT- C5170-9A-0212-R1 Test Laboratory: Comptest/Kyocera Date: 3/22/2012 2450MHz Validation (in Muscle), Probe #3078, DAE #530, Dipole #776 Communication System: CW, Frequency: 2450 MHz, Duty Cycle: 1:1 3 Medium: M2450,Medium parameters used (interpolated): f = 2450 MHz; σ = 1.98 mho/m; ε r = 50.4; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3078, ConvF(4.16, 4.16, 4.16), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C 2450MHz Validation @20dBm/Area Scan (61x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 7.04 mW/g 2450MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 50.0 V/m; Power Drift = -0.052 dB Peak SAR (extrapolated) = 12.3 W/kg SAR(1 g) = 5.6 mW/g; SAR(10 g) = 2.53 mW/g Maximum value of SAR (measured) = 6.38 mW/g 0 dB = 7.04mW/g © 2012 Comptest Services LLC Page 12 of 12 SAR Validation Plots This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


Document Created: 2012-04-24 10:23:07
Document Modified: 2012-04-24 10:23:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC