SAR dipole certificate

FCC ID: V65C5155

RF Exposure Info

Download: PDF
FCCID_1783399

Applicant Kyocera FCC ID:: V65C5155 IC #: 3572A-C5156 Report #: CT-C5156-9D-0712-R0 EXHIBIT 9 APPENDIX D: SAR DIPOLE CALIBRATION CERTIFICATE Total pages including cover page = 27 # 467 # 5d016 # 776 © 2012 Comptest Services LLC Page 1 of 1 SAR Dipole Cert This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Calibration Laboratory of 8 Schweizerischer Kalthrigrdlenst Schmid & Partner Service suisse d‘étalonnage Engineering AG C Servizlo svizzero di teratura Zeughausstrasse 48, 6004 Zurich, Switzerland § Swiss Calibration Service Accredited by the Swiss Accreditation Service (BAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Muftifateral Agreement for the recognition of calibration certificates Object Caltbration procedure(s) Celibration date: This calibration certficate documents the Ireceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with contldence probability are given on the following pages andare part of the certificate. All calibrations have bear conductedin the alosed laboratory facility: environment temperature (22 « 8)°C and hurnidity = 70%. Calibration Equipment used (M&TE crttical for calibration) Cal Date (Certificate No.) —__ Seheduled Calibration ower meter & 2. 1897480704 08—0ct—09 (No. 217—01086) Oct—10 Power sensor HP B481A USsg72or7es 06—0ct—09 (No. 217—01086) Oct—10 Reference 20 dB Aftenuator SN: 5086 (209) 30—Mar—10 (No. 217—01158) Map1i Type—N mismatch combination SN: 5047.2 / o6827 80—Mar—10 (No. 217—01182) Mar—11 Reference Probs ES@DV3 SN: 8205 30—Apr—10 (No. ES3—8206_Apr10) Apr=11 DAE4 l SN: 601 10—Jun—10 (No, BAE4—601_Junt0) June11 Secondary Standards | ID # aall _Gheck Date (in house) . Powarsensor P §481A MY41002317 18—0ct—02 (in house chack Oct—08) in house check: Oct—11 RF generator R&S SMT—06 100008 4—Aug—99 (in house check Oct—08) in house check: Oct—11 Network Analyzer HP 8753E Usazsaosas s4206 18—0ct—01 {in house check Oct—09) in hause cheok: Oct—10 Name Function Calibrated by: j . Approved by: issued: September 3, 2010 tion cerfificate shall not be reproducedexcept in full without mgz__laboratory. Certificate No: DB3SV2—467_Sep10 Page 1 of 9

Catibration Laboratory of Schwelzerischer Kalibrierdienst Schmid & Partner Service sulsse d‘étalonniage Engineering AG Servizio avizzero d taratura Zoughausstrasse /53‘ $004 Zurich, Switzerland Swiss Calibration Service Acoredited by the Swiss Acoreditation Service (SAS) Accreditation No.: SCS 108 The Swise Accreditation Service is ane of the signatories to the EA Multitateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) 1EEE Std 1528—2003, "EER Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) I£C 62208—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) Federal Communications Commission Office of Engineering & Technology (FCC OET}), "Evatuating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compilfance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipote positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power, No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. & SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. Certificate No: DBSSV2—467_Sep10 Page 2 of 9

Measurement Conditions DASY Version DASYS VS2.2 Extrapolation Advanced Extrapolation Phantom Modular Fiat Phantom V4.9 Distance Dipole Center — TSL 15 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 835 MHz +1 MHz Head TSL parameters The following parameters and calculations were applied. . Tarmrrl;ceratura Permittivity Condusctivity Nominal Head TSL parameters 22.0 °C CC 41.5 0,80 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 42.0 26 % _ 0.89 mho/m26 % Head TSL temperature during test (22.2 x 0.2) °C Cl SAR result with Head TSL Condition SAR measured 250 mW input power 2,89 mW / g SAA normalized normalized to 1W 9.56 mw / g SAR for nominal Head TSL parameters normalized to 1W 9.67 mW ig a 17.0 % (k=2) condition 250 mW input power 1.56 mW /g SAR normalized normalized to 1W 8.24 mW / g SAR for nominal Head TSL parameters normallzed to 1W 6.29 mW 7g & 16.5 % (k=2) Certificate No: DBSSV2—467_Sep10 Page 3 of 9

Body TSL parameters The tollowing parameters and calculations were appfi ed. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 55.2 0.97 mhaim (22.0 x 0.2) °C 55.0 + 6 % 0.98 mho/m x 6 % Body TSL temperature during test (22.4 + 0.2) °C SAR result with Body TSL SAFR averaged over 1 om"* (1 g) of Body TSL Condition SAR measured 250 mW input power 2.51 mW / g SAR normalized normalized to 1W 10.0 mW /g SAR for nominal Bady TSL parameters normalized to 1W $.95 mW / g & 17.0 % (Ic=2) SAR averaged over 10 em* (10 g) of Body TSL condition SAR measured 250 mW input power 1.64 mW / g SAR normalized normalized to 1W 6.56 mWw /g SAR for nomjnal Body TSL parameters normalized to 1W 6.82 mW / g a 16.5 % (ke=2) Certificate No: D835V2—46 Sep10 Page 4 of 9

Appendix Antennia Parameters with Head TSL {mpedance, transformed to feed point 49.8 C1 «1.4 |Q Return Loss —37.1 4B Antenna Parameters with Body TSL Impedance, transformed to feed point 45.9 1 — 3.6 |Q Return Loss —24.9 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.392 ns After long termuse with 100OW radiated power, only a slight warming of the dipole near the fesdpoint can be measured. The dipote is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole, The anterinais therefore short—circuited for DC—signals. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manuftactured by SPEAG Manufactured on August 27, 2002 Certificate No: DBSSV2—467,Sep10 Page 5 of 9

DASYS Validation Report for Head TSL Date/Time: 02.09.2010 11:06:42 Test Laboratory: SPEAG, Zurich, Switzerland BUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 — SN:467 Communication System: CW; Frequency: 835 MHz; Duty Cycle: E:1 Medium: HSL900 Medium parameters used: f = 835 MHz; a = 0.89 mho/m; & = 42.1; p = 1000 kg/m" Phantom section: Flat Section Measurement Standard: DASYS (IEBE/EC/ANSI €63.19—2007) DASY3 Configuration: # Probe: ES3DV3 — SN3205; ConvF(6.03, 6.03, 6.03); Calibrated: 30.04.2010 «_ Sensor—Surface; 3mm (Mechantcal Surface Detection) # Electronics: DAE4 Sn601; Calibrated: 10,06,2010 * Phantom: Flat Phantom 4.9L; Type: QD00OP49AA; Serial: 1001 * Measurement SW: DASY52, V52.2 Build 0, Version 52.2.0 (163) * Postprocessing SW: SEMCAD X, V14.2 Build 2, Version 14.2,2 (1685) Pin=250 mW /d=1 5mm, dist=3.Qmm (ES—Probe)/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=Smm Reference Value = 57.4 V/m; Power Drift =0.011 dB Peak SAR (extrapolated) = 3.6 W/kg SAR(I g) = 2.39 mW/g; SAR(10 g) = 1.56 mW/g Maximurvalue of SAR (measured) = 2.79 mW/g 0 dB = 2,79mW/g Cenrtificate No: D835V2~4167_Sep1Q Page 6 of 9

Impedance Measurement Plot for Head TSL 2 Sep 2010 ©9:99+57 19489 pf $45.000 008 MFz UNZ Mart mme Cenrtificate No: D835V2—467,. Sep10 Page 7 of 9

DASYS Validation Report for Body Date/Time: 02.09.2010 14:41 :12 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 835 MHz; Type: D835V2; Serial: DB3SV2 — SN:467 Communication System: CW; Frequency: 835 MHz; Duty Cycle: 1:1 Medium: MSLI0O Mediumparameters used: f= §35 MHz; 0 = 0.98 mbo/m; s, = 55; p = 1000 kg/m" Phantoimn section: Flat Section Measurement Standard; DASY3 (EEE/AEC/ANST €63.19—2007) DASY3 Configuration: * Probe: ES3DV3 — SN3205; ConvP(35.86, 5.86, 5.86); Catibrated: 30,04,2010 ¢ Sensor—Surface; 3mm (Mechanical Surface Detection) e Eilectronics: DA$8601; Calibrated: 10.06.2010 * Phantom: Plat Phantom 4.9L; Type: QD00OP4IAA; Serial: 1001 * Measurement SW: DASY52, V52.2 Build 0, Version $2.2.0 (163) * Postprocessing SW: SEMCAD X, V14.2 Build 2, Version 14.2.2 (1685) Pin250 mW /d=15mm, dist=3.0mm (ES—Probe)/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 56.5 V/m; Power Drift = 0.011 dB Peak SAR (extrapolated) = 3.72 W/kg SAR(L g) = 2.51 mW/g; SAR(1O g) = 1.64 mW/g Maximum value of SAR (measured) = 2.93 mW/g 0 dB = 2.93mW/g Certificate No: D88§V2—467_8ep10 Page 8 of 9

Impedance Measurement Plot for Body TSL 2018 1314§:i12 811 1 t 65 45 45. 2 0 f00 boo MHz CHA M ar Tie 1 Gor Certificate No: DB35V2—467, Sep1Q Page 9 of 9

Calibration Laboratory of 5 Schwelzerischer Katibrierdienst Schmid & Partner c Service sulsse d‘étalonnage Engineering AG Pmennlr Servizic svizzero di taratura Zeughausstrasse 48, 8004 Zurich, Switzerland "/,1/77{\;\\‘; $ Swiss Calibration Service fdhtuale Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilaterat Agreement for the recognition of calibration certificates Object Calibration procedure(s) Caltbration date: This calibration certificate documents the traceabillty to national standards, which realize the physical units of meagurements (81). The measurements and the uncertainties with confidence probability are given onthe following pages and are part of the certificate. All calibrations have been conducted in the clased laboratory facllity: environment temperature (22 & 3)°C and humidity « 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards 10# .... Oertificate No.) Scheduled Cailbrati Power meter EPM—442A GAB7480704 06—Oct—09 (No. 217—01088) Oct10 Powar sensor HP 8481A US$?202783 16—00t—09 (No. 217—01086) Oct10 Reference 20 dB Aftenuator SN: 5086 (209) 30—Mar 10 (No. 217—01358) Mar—11 Type—N mismaish combination SN; 5047.2 / 06327 80—Mar—10 (No. 217—01162) Mare11 Reference Probe ESSDV3 SN: 3208 80—Apr—10 (No, £S3—8205, Apr10) Apre1 DAE4 SN: 601 10—Jun—10 (No. DAE4—601_Jun10) Jun—11 Secondary Standards iD # CheckDate (in house) _______ Scheduled Check Power sensor HP 4814 MYA1002317 18—00t—02 (in house check Oct—08) In house check; Oct—11 RF generator RAS SMT—06 100006 4—Aug—99 (In house check Oct—08) In house check: Oct11 Network Analyzer HP 87586 US37390585 $4206 18—Oct—01 (in house chack Oct—08) In house check: Oct—10 Name Function Signe — Calibrated by: Approved by: Issued: September 7, 2010 te shall not be reproduced except in full without written approval of the laboratory. Certificate No: D1900V2—54016_Sep10 Page 1 of 9

Calibration Laboratory of Schwelzerischer Kafibrierdienst Schmid & Partner Sorvice sulsge d‘étalonnage Enginesring AG Servizio avizzero d} tarature Zeughausstrasse 43, 8004 Zurich, Switzertand * oX w Swiss Calibration Service rlui k Accredited by the Swiss Accreditation Service (SA8) Accreditation No.: SCS 108 The Swiss Accreditation Service is ane of the signatories to the EA Multitateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEERE Std 1528—2003, "IEEE Recommended Practice for Determining the Peak Spatiat— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) 1£C 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)®, February 2005 ¢) Federal Communications Commission Office of Engineering & Technology (FCC OET}), "*Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. e Feed Point Impedanee and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ansures low reflected power, No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. * SAR measured: SAR measured at the stated antenna input power, * SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. a SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. Certiticate No: D1900V2—50016_Sep10 Page 2 of 9

Measurement Conditions DASYsystem configuration, as far as not given on page 1. DASY Version DASYS V52.2 Extrapolation Advanced Extrapolation Phantom Modular F!z;zr Phantom V5.0 CCC Distance Dipole Center — TSL 10 |"nmw with Spacer Zoom St:an Resolution ax, dy, dz =&5 mm _| _ Frequency | _ 1900 MHz +1 MHz =_ Head TSL parameters The following parameters and calculations were applied. hall Temperature Permittivity Conductivity Nominal Head TSL parameters 22‘0”:6’’’’’’ 40.0 1.40 mho/m Measured Head TSH paral;;amrs (22.0 £ 0.2) °C 39.6 x 6‘ %o 1141 mho/m + 6 % Head TSL temperature during test __ (22.4 £0.2) °C «> ~ CC SAR result with Head TSL SAR averaged over 41 cm" (1 g) of Head Tfit Condition SAR measured 250 mW input power WQ\QB mW /g SAR normalized normalized to 1W 39.9 mW /g SAR for nominal Head TSL parameters normalized to 1W 39.6 mW /q « 17.0 % (k=2) SAR averaged over 10 om‘ (10 g) of Head TSL condition SAR measured 250 mW input power 5.19 mW /g SAR normatized normalized to 1W 20.8 mW /g normalized to 1W 20.7 mW /q # 16.5 % (k=2) Certificate No: D+900V2—5d016_Sep10 Page 3 of 9

Body TSL parameters Temperature Permlttlvitly Conductivity |Nominal Body TSL parameters__ 22.0 °C 53.3 1.52 mho/m Measured Body TSL parameters (22.0 x 0.2) °C aa1 *#6to 1.54 mho/m # 6 % Body TSL temperatureduring test (21.9 =0.2) °C Condition TCO SAR measured 250 mW input power 10.1 mwig _ SAR normalized normalized to 1W 40.4 mW / g '%AR for nominal Body TSL parameters normalized to 1W 40.1 mW 7 g £ 17.0 ?‘z‘(kwa) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power ~ SAR normalized _ normalized to 1W 21.4 mV“\fll /9 SAR for nominal Boay / ~—normalized to 1W 21.3 mW / g a 16.5 % (ke2) Certificate No: D1900V2—54016_Sept0 Page 4 of 9

Appendix Antennia Parameters with Head TSL Impedance, transformed to feed point 1.2 0 + 4.4 jf2 Return Loss —27.0 dB Antenna Parameters with Body TSL impedance, transtormed to feed point 46.7 Q + 4.6 JCQ Return Loss +24.6 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.197 ns | After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipote is made of standard semirigid coaxfal cable. The center conductor of the feeding fine is directly conniected to the second arm of the dipole, The antenna is therefore short—cireuited for DC—signals. No excessive force must be applied to the dipole arms, because they might bend or the soidered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by Manufactured on Certificate No: D1900V2—5d0186_Sep1Q Page 5 of 9

DASYS Validation Report for Head TSL Date/Time: 07.09.2010 13:04:41 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 1906 MHz; Type: D1900V2; Serial: D1900V2 — SN:5d016 Communication System: CW; Frequency: 1900 MHz; Duty Cycle: :1 Medium: HSL U12 BB Mediam parameters used: f= 1900 MHz; a = 141 mho/m; ; = 39.6; p = 1000 kg/m'* Phantomsection: Flat Section Measurement Standard: DASYS (IE BE/AEC/ANSI €C63.19—2007) DASYS3 Configuration: «_ Probe: ESSDV3 — SN3205; ConvF(5.09, 5.09, 5.09); Calibrated: 30.04.2010 « Sensor—Surface: 3mm (Mechanical Surface Detection) a Electronics: DAB4 $n601; Calibrated: 10.06.2010 e Measurement SW: DASY52, V52.2 Build 0, Version 52.2.0 (163) + Postprocessing SW: SEMCAD X, V14.2 Build 2, Version 14.2.2 (1685) Pin=250 mW /d=1O0mm, dist=3.0mm (ES—Probey/Zoom Scan (7x7x7) /Cube 0: Measurement grid: dx=Smm, dy=Srmm, dz=5mm Reference Value = 96.8 V/m; Power Drift = 0.036 dB Peak SAR (extrapolated) = 18.3 W/kg SAR(1 g) = 9.98 mW/g; SAR(1O g) = 5.19 mW/g Maximum value of SAR (measured) = 12.3 mW/g (} dB = 12.3mW/g Certificate No: D1900V2—54016_Sep10 Page 6 of 9

Impedance Measurement Plot for Head TSL ? Sep 2010 12111143 SA1t £ou Fs 64 phH 1 990.000 000 NHz &# t1 Cor CHZ Cor fitq 16" Certificate No: D1900V2—5d016_Sep1Q Page 7 of 9

DASYS Validation Report for Body Date/Time: 07.09.23010 13:46:48 Test Laboratory: SPBAG, Zurich, Switzerland DUT: Dipole 1960 MHz; Type: D1900V2; Serial; D1900V2 « SN:50016 Communication System: CW,; Frequency: 1900 MHz; Duty Cycle: 1:1 Medium: MSL U11 BB Medium parameters used: £= 1900 MHz; o = 1.54 mho/m:; s = 53.1; p = 1000 kg/mfi Phantom section: Flat Section Measurement Standard: DASY3 (IEEE/AEC/ANSI C63.19—2007) DASYS Configuration: Probe: ES3DV3 — SN3205; ConvF(4.59, 4.59, 4.59); Calibrated: 30.04.2010 Sensor—Surface: 3mm (Mechanical Surface Detection} Electronics: DAEB4 Sn601; Calibrated: 10.06.2010 Phantom: Flat Phantom 5.0 (back): Type: QDO0OOP5OAA; Serial: 1002 Measurement SW: DASY52, V52.2 Build 0, Version 52.2.0 (163) Postprocessing SW: SEMCAD X, V14.2 Build 2. Version 14.2.2 (1685) Pin=250 mW /d=10mm, dist=3.0mm (ES—Probe)/Zoom Scan (7x7x7) /Cube 0: Measurement grid: dx=Smimn, dy=5mm, dz=Stmim Reference Value = 96.3 V/m; Power Drift = —0.013 dB Peak SAR (extrapolated) = 17.2 W/kg SAR(I g) = 10.1 mW/g; SAR(1O g) = 5.34 mW/g Maximum value of SAR (measured) = 12.7 mW/g 0 dB = 12.7mW/g Certificate No: D1900V2—5d016..Sep10 Page 6 of 9

impedance Measurement Plot for Body TSL ? Sep 2B1G 12:12113 4 pH i A Eim & " \ for Cortificate No: D1900V2—54016_Sep1tO Page 9 of 9

Calibration Laboratory of 8 Schweizerischer Kalibrierdienst Schmid & Partner Service sulase diétalonnage Engineering AG C Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerlend mWt S gwiss Calibration Service "Arlsstyde® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilaters) Agreement for the recognition of calibration certificates Client Kyocera USA Cenicate No: 124500/2—776.Jul12 [CALIBRATION CERTIFICATE Object D2450V2. — SN: 776 Calibration procedure(s) QA CAL—05.v8 Calibration procedure for dipole validation kits above 700. MHz Calibration date: Juny:09; :2012 This calibration certificate documents the traceability to natlonal stendards, which realize the physical units of measurements (S1). The measurements and the uncertaintiss with confidence probability are given on the following pages and are part of the certificate. All calibrations have beenconducted in the closed laboratoryfacility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critcal for cattoration) Primary Standards ID # .._. ate (Certificate No.) Scheduled Caltbration Power meter EPM—442A ©B37480704 05—0ct—11 (No. 217—01451) Oct—12 Power sensor HP 8481A US37202783 06—Oct—11 (No. 217—01461) Oct—12 Reference 20 dB Attenuator SN: 5058 (20K) 27—Mar—12 (No. 217—01580) Apr—18 Type—N miamaich combination SN: 5047.2 / 06327 27—Mar—12 (No, 217—01533) Apt—13 Reference Probe ESSOV3 SN: 3205 30—Dec1 (No. £93—3205_Dect1) Dec—12 DABA4 SN: 801 05—«dun—12 (No. DAE4—901,dunt2) Jun—18 | Secondary Standerds. ID # Check Date (in house) Scheduled Check Power sensor HP 8481A MY41092317 18—Oot—02 (in house check Oct—11) in house cheok: Oct—13 RF generator R&S SMT—06 100006 04—Aug—99 (in house check Oct—11) in house chack: Oct—13 Natwork Analyzer HP 8763E US37300685 $4206 18—00t—01 (Inhouse check Oct—11) In house check: Oat—12 Name Function Signature Calibrated by: ferae ENaouq i cLeboretory Technictan #C ) o {MMM afi“fi%&”&wmw@; Approved by: KatJa:Rokovic Technical:Manager lsgued: July 9, 2012 calibration certit i} not be reproduced excapt in full without written approval of the laboratory. Certificate No: D2450V2—776,Jul12 Page 1 of 8

Calibration Laboratory of § Schwelzerischer Keilbrierdienst Schmid & Partner Service sulsse d‘étalonnage Engineering AG C Servizio svizzero di teratura Zeughausstrasse 43, 5004 Zurich, Switzerland § Swiss Calibration Service Accredited by the Swise Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of callbration certificates Glossary: TSL tissue simulating fiquid ConvE sensitivity in TSL / NORM x.y,z2 N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) {EEE Std 1528—2003, "IEERR Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) 1E2C 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) Federal Communications Commission Office of Engineering & Technotogy (FCC OET), "Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiotfrequency Emissions", Supplement C (Edition G1—01) to Bulletin 65 Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. «* Anterna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle! to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. a SAR measured: SAR measured at the stated antenina input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector, s SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probabitity of approximately 95%. Certificate No: D2450V2—776_Jul12 Page 2 of 8

Messurement Conditions DASY sysiem configuration, as far as not given on page 1. DASY Version DASYS V52.8.1 Extrapolation Advanced Extrapolation Fhantont Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 im Frequency 2450 MHz & 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 30.2 1.80 mho/im Measured Head TSL parameters (22.0 x 0.2) °C 39.9 + 6 % 1.85 mho/m # 6 % Head TSL temperature change during test <6.5 °C wane SAR result with Head TSL SAR averaged over 1 ocm‘ (1 g) of Head TSL Condition SAR measured 250 mW input power 13.4 mW /g SAR for nominal Head TSL parameters normalized to 1W §2.8 mW 1g a 17.0 %(k—2) condition SAR measured 250 mW input power 621 mW /g SAR for nominal Head TSL parameters normalized to 1W 24.6 mW /g « 16.5 %(k=2) Body TSL parameters The fellowing parameters and calculations were applied, Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 51.4 * 6 % 2.01 mho/im « 6 % Body TSL temperature change during test =0.5 °C mn~ a——— SAR result with Body TSL SAFM averaged over 1 ocm‘ (1 g) of Body TSL Condition SAR measured 250 mW input power 13.1 mW /g SAR for nominal Body TSLparameters normalized to 1W 51.4 mW / g & 17.0 % (k=2) SAR averaged over 10 om* (10 g) of Body TSL condition SAF measured 250 mW input power 6.14 mW 7/g SAR for nominal Body TSL parameters normalized to 1W 24.3 mW / g #16.5 % (k=2) Page 3 of 8

Apperncix Antenna Parameters with Head TSL Impedance, transformed to feed point 56.0 £1 + 7.8 J62 Return Loss —20.7 dB Anterina Parameters with Rody TSL tmpedance, transformed to feed point 52.0 t + 8.7 |0 Return Loss «20.3 dB General Antenna Parameters and Design Electrical Delay (one direction) 1158 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipolte is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antennia is therefore short—circulted for DC—signals, On some of the dipoles, smail end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph, The SAR data are not affected by this change. The overall dipole lengthis still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soidered connections near the feedpoint may be damaged. Additional EUT Data Manutactured by sPreac Manutactured on April 04, 2005 Certificate No: D24SOV2—776_Jull2 Page 4 of 8

DASYS5 Validation Report for Head TSL Date: 09.07.2012 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V3 « SN: 776 Communication System: CW; Frequency: 2450 MHz Medium parameters used:; £= 2450 MHz; a = 1.85 mho/m; s = 38.9; p = 1000 kg/m" Phantomsection: Flat Section Measurement Standard: DASY5 (IEEEATEC/ANSI €©63.19—2007) DASY532 Configuration: e Probe: ES3DV3 — SN3205; ConvF(4.45, 4.45, 4.45}; Calibrated: 30.12.2011; e Sensor—Surface: 3mm (Mechanical Surface Detection) * Electronics: DAB4 $n901; Calibrated: 05.06.2012 s Phantom: Flat Phantom 5.0 (front); Type: QD00O0P5OAA; Serial: 1001 «_ DASY52 52.8.1(838), SEMCAD X 14.6.5(6469) Dipole Calibration for Head Tissue/Fin=250 mwW, d=10mm/Zoom Scan (7x‘7x7)/Cube 0: Meagurement grid: dx=S5mm, dy=>mm, dz=5mm Reference Value = 99.995 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 27.568 mW/g SAR(I g) =13.4 mW/g; SAR(IO g) = 6.21 mW/g Maximumvalue of SAR (measured) = 17.2 mW/g 0 dB = 17,2 mW/g =24.71 dB mW/g Cortificate No: D2450V2—776, Jul12 Page 5 of 8

impadance Measurement Plot for Head TSL 9 Jul 2012 B9:58:S A uU Fs a §$@4.34 pH 2 450,000 090 MHz HId CH2 2.099 688NHz i } | H1d | amadices boomapiewed ‘ART 2 250,000 060 MHz sthm t esa.aed nanrhe Certificate No: D2450V2—776_Jult2 Page 6 of 8

DASY5 Validation Report for RBody TSL Date: 09.07.2012 Test Laboratory: SPBAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V3 — SN: 776 Communication System: CW; Frequency: 2450 MHz Medium parameters used: {= 2450 MHz; 0 = 2.01 mho/m; & = 51.4; p = 1000 kg/m‘ Phantom section: Flat Section Measurement Standard: DASY3 (IEER/EC/ANSI €63.19—2007) DASY32 Configuration: e Probe: ES3DV3 — SN3205; ConvP(4,26, 4.26, 4.26); Calibrated: 30.12.2011; e Sensor—Sutface: 3rmim (Mechanical Surface Detection) * Electronics: DAFBA $n901; Calibrated: 05.06.2012 «_ Phantom: Flat Phantom 5.0 (back); Type: QDOOOPSOAA; Serial: 1002 e DASY52 52.8.1(838); SEMCAD X 14.6.5(6469) Dipole Calibration for RBody Tissue/Pin=250 mW , d=10mm/Zoom Scan (7x7«7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 96.076 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 27.051 mW/g SAR(L g) = 13.1 mW/g; SAR(IO g) = 6.14 mW/g Maximum value of SAR (measured) = 17.3 mW/g 2.60 18.20 2400 wesla 0 dB = 17.3 mW/g=24.76 dB mW/g Certificate No: D2450V2—776,_Jull2 Page 7 of 8

Impedance Measurement Plot for Body TSL 9 Jul 2012 B9H5@115 C san G at $1.999 6 2 450,000 000 MHx w De 1 Ca { 1. 1 \ . x fvg \ e 4 16 Hid TNE $14.. LBB.__.__ 9BC n#8O8 .l lll2lll222 48 .2 459.000 009 MHz., Ca M _ i i 4. 4. «] [ i | biP o 4 wb } stop 2 £80.000 oob miz_ Certificate No: D24S50V2—776, Jull2 Page 8 of 3


Document Created: 2012-08-16 16:02:54
Document Modified: 2012-08-16 16:02:54
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC