SAR plots - body

FCC ID: V65C5155

RF Exposure Info

Download: PDF
FCCID_1783397

Applicant Kyocera FCC ID:: V65C5155 Report #: CT- C5156-9B2-0712-R0 EXHIBIT 9 APPENDIX B2: SAR DISTRIBUTION PLOTS (BODY) CELL-BC 0 © 2012 Comptest Services LLC Page 1 of 20 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5155 Report #: CT- C5156-9B2-0712-R0 Test Laboratory: Comptest/Kyocera Date: 07/18/2012 FCC C5156 CDMA-800 BC-0 Flat with 15mm Air Space, Face Down Ch. 384, Closed Communication System: CDMA-800, Frequency: 836.52 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.94 mho/m; ε r = 54.6; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(6.21, 6.21, 6.21), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/27/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 22.0 CDMA-800 FLAT - Face Down Ch384/Area Scan (61x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.750 mW/g CDMA-800 FLAT - Face Down Ch384/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 26.7 V/m; Power Drift = 0.063 dB Peak SAR (extrapolated) = 0.893 W/kg SAR(1 g) = 0.700 mW/g; SAR(10 g) = 0.505 mW/g Maximum value of SAR (measured) = 0.741 mW/g 0 dB = 0.750mW/g © 2012 Comptest Services LLC Page 2 of 20 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5155 Report #: CT- C5156-9B2-0712-R0 © 2012 Comptest Services LLC Page 3 of 20 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5155 Report #: CT- C5156-9B2-0712-R0 Test Laboratory: Comptest/Kyocera Date: 07/18/2012 FCC C5156 CDMA-800 BC-0 Flat with 15mm Air Space, Face Up Ch. 384, Closed Communication System: CDMA-800, Frequency: 836.52 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.94 mho/m; ε r = 54.6; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(6.21, 6.21, 6.21), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/27/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 T = 22.0 CDMA-800 FLAT - Face Up Ch384 Closed/Area Scan (61x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.462 mW/g CDMA-800 FLAT - Face Up Ch384 Closed/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.1 V/m; Power Drift = 0.092 dB Peak SAR (extrapolated) = 0.541 W/kg SAR(1 g) = 0.440 mW/g; SAR(10 g) = 0.329 mW/g Maximum value of SAR (measured) = 0.467 mW/g 0 dB = 0.462mW/g © 2012 Comptest Services LLC Page 4 of 20 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5155 Report #: CT- C5156-9B2-0712-R0 Test Laboratory: Comptest/Kyocera Date: 07/18/2012 FCC C5156 CDMA-800 BC-0 Flat with 15mm Air Space, Face Down Ch. 384, Open Communication System: CDMA-800, Frequency: 836.52 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.94 mho/m; ε r = 54.6; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(6.21, 6.21, 6.21), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/27/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 22.0 CDMA-800 FLAT - Face Down Ch384/Area Scan (81x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.743 mW/g CDMA-800 FLAT - Face Down Ch384/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 25.3 V/m; Power Drift = -0.004 dB Peak SAR (extrapolated) = 0.914 W/kg SAR(1 g) = 0.703 mW/g; SAR(10 g) = 0.494 mW/g Maximum value of SAR (measured) = 0.751 mW/g 0 dB = 0.743mW/g © 2012 Comptest Services LLC Page 5 of 20 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x.y,z,f0) SAR; Z Scan: Value Along Z, X=0, Y=0 0.7 CT |aer***" TT 0.6 / 0.5 L* 0.4 & [ 2 L 0.3—|— T 0.2—|— \\ 0.0 4 *~*t—— aa e y c a uh _1 1___| _1 _1 1__L__| 1__1 1 1 1__L _ 1__L _ L__ _ 0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 m

Applicant Kyocera FCC ID:: V65C5155 Report #: CT- C5156-9B2-0712-R0 Test Laboratory: Comptest/Kyocera Date: 07/18/2012 FCC C5156 CDMA-800 BC-0 Flat with 15mm Air Space, Face Up Ch. 384, Open Communication System: CDMA-800, Frequency: 836.52 MHz, Duty Cycle: 1:1 3 Medium: M800,Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.94 mho/m; ε r = 54.6; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(6.21, 6.21, 6.21), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/27/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 22.0 CDMA-800 FLAT - Face Up Ch384/Area Scan (81x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.555 mW/g CDMA-800 FLAT - Face Up Ch384/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 15.0 V/m; Power Drift = 0.041 dB Peak SAR (extrapolated) = 0.663 W/kg SAR(1 g) = 0.516 mW/g; SAR(10 g) = 0.365 mW/g Maximum value of SAR (measured) = 0.552 mW/g 0 dB = 0.555mW/g © 2012 Comptest Services LLC Page 7 of 20 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5155 Report #: CT- C5156-9B2-0712-R0 PCS © 2012 Comptest Services LLC Page 8 of 20 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5155 Report #: CT- C5156-9B2-0712-R0 Test Laboratory: Comptest/Kyocera Date: 07/17/2012 FCC C5156 PCS Flat with 15mm Air Space, Face Down Ch. 600, Closed Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: M1800,Medium parameters used: f = 1880 MHz; σ = 1.52 mho/m; εr = 51.7; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(4.44, 4.44, 4.44), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/27/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C CDMA-1900 FLAT - Face Down Ch600/Area Scan (61x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.832 mW/g CDMA-1900 FLAT - Face Down Ch600/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.8 V/m; Power Drift = -0.042 dB Peak SAR (extrapolated) = 1.14 W/kg SAR(1 g) = 0.750 mW/g; SAR(10 g) = 0.466 mW/g Maximum value of SAR (measured) = 0.809 mW/g 0 dB = 0.832mW/g © 2012 Comptest Services LLC Page 9 of 20 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST es d Services LLC Interpolated SAR(x.y,z,f0) e SAR; Z Scan: Value Along Z, X=0, Y=0 I 0.25 0.20 0.15 mWi/g 0.10 \ 0.05 \ f6rive n vepeeve n e uen reai rene k we ue n nepurt neveveneve se werrurvepees in e rnaripanvareae [v ---------------------- en ner evevav en bwe e e eb revwer 6 urver evever ev wet we werbrpur ib neves w mev o n burnene "—"-J-‘ enea ns

Applicant Kyocera FCC ID:: V65C5155 Report #: CT- C5156-9B2-0712-R0 Test Laboratory: Comptest/Kyocera Date: 07/17/2012 FCC C5156 PCS Flat with 15mm Air Space, Face Up Ch. 600, Closed Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: M1800,Medium parameters used: f = 1880 MHz; σ = 1.52 mho/m; εr = 51.7; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(4.44, 4.44, 4.44), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/27/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C CDMA-1900 FLAT - Face Up Ch600 Closed/Area Scan (61x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.505 mW/g CDMA-1900 FLAT - Face Up Ch600 Closed/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.18 V/m; Power Drift = 0.063 dB Peak SAR (extrapolated) = 1.44 W/kg SAR(1 g) = 0.485 mW/g; SAR(10 g) = 0.139 mW/g Maximum value of SAR (measured) = 0.462 mW/g CDMA-1900 FLAT - Face Up Ch600 Closed/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.18 V/m; Power Drift = 0.063 dB Peak SAR (extrapolated) = 0.622 W/kg SAR(1 g) = 0.423 mW/g; SAR(10 g) = 0.275 mW/g Maximum value of SAR (measured) = 0.456 mW/g 0 dB = 0.505mW/g Test Laboratory: Comptest/Kyocera Date: 07/17/2012 © 2012 Comptest Services LLC Page 11 of 20 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5155 Report #: CT- C5156-9B2-0712-R0 FCC C5156 PCS Flat with 15mm Air Space, Face Down Ch. 600, Open Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: M1800,Medium parameters used: f = 1880 MHz; σ = 1.52 mho/m; εr = 51.7; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(4.44, 4.44, 4.44), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/27/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C CDMA-1900 FLAT - Face Down Ch600/Area Scan (81x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.516 mW/g CDMA-1900 FLAT - Face Down Ch600/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.5 V/m; Power Drift = -0.172 dB Peak SAR (extrapolated) = 0.740 W/kg SAR(1 g) = 0.482 mW/g; SAR(10 g) = 0.304 mW/g Maximum value of SAR (measured) = 0.517 mW/g CDMA-1900 FLAT - Face Down Ch600/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.5 V/m; Power Drift = -0.172 dB Peak SAR (extrapolated) = 0.535 W/kg SAR(1 g) = 0.379 mW/g; SAR(10 g) = 0.252 mW/g Maximum value of SAR (measured) = 0.408 mW/g 0 dB = 0.516mW/g © 2012 Comptest Services LLC Page 12 of 20 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5155 Report #: CT- C5156-9B2-0712-R0 © 2012 Comptest Services LLC Page 13 of 20 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5155 Report #: CT- C5156-9B2-0712-R0 Test Laboratory: Comptest/Kyocera Date: 07/17/2012 FCC C5156 PCS Flat with 15mm Air Space, Face Up Ch. 600, Open Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: M1800,Medium parameters used: f = 1880 MHz; σ = 1.52 mho/m; εr = 51.7; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1618, ConvF(4.44, 4.44, 4.44), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/27/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C CDMA-1900 FLAT - Face Up Ch600/Area Scan (81x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.330 mW/g CDMA-1900 FLAT - Face Up Ch600/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.41 V/m; Power Drift = 0.035 dB Peak SAR (extrapolated) = 0.470 W/kg SAR(1 g) = 0.312 mW/g; SAR(10 g) = 0.205 mW/g Maximum value of SAR (measured) = 0.333 mW/g CDMA-1900 FLAT - Face Up Ch600/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.41 V/m; Power Drift = 0.035 dB Peak SAR (extrapolated) = 0.452 W/kg SAR(1 g) = 0.296 mW/g; SAR(10 g) = 0.193 mW/g Maximum value of SAR (measured) = 0.315 mW/g 0 dB = 0.330mW/g © 2012 Comptest Services LLC Page 14 of 20 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5155 Report #: CT- C5156-9B2-0712-R0 WIFI © 2012 Comptest Services LLC Page 15 of 20 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5155 Report #: CT- C5156-9B2-0712-R0 Test Laboratory: Comptest/Kyocera Date: 08/07/2012 FCC C5156 WiFi Flat with 15mm Air Space, Face Down Ch.6, Closed Communication System: WLAN-2450, Frequency: 2437 MHz, Duty Cycle: 1:1 3 Medium: M2450,Medium parameters used: f = 2400 MHz; σ = 1.92 mho/m; εr = 52.8; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.09, 4.09, 4.09), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/27/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C Ch 2450 ch6 Face DOWN/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.101 mW/g Ch 2450 ch6 Face DOWN/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.20 V/m; Power Drift = -0.020 dB Peak SAR (extrapolated) = 0.209 W/kg SAR(1 g) = 0.094 mW/g; SAR(10 g) = 0.049 mW/g Maximum value of SAR (measured) = 0.103 mW/g Ch 2450 ch6 Face DOWN/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.20 V/m; Power Drift = -0.020 dB Peak SAR (extrapolated) = 0.170 W/kg SAR(1 g) = 0.070 mW/g; SAR(10 g) = 0.030 mW/g Maximum value of SAR (measured) = 0.095 mW/g 0 dB = 0.101mW/g © 2012 Comptest Services LLC Page 16 of 20 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x.y,z,f0) SAR; Z Scan: Value Along Z, X=0, Y=0 0.11 EEETTT 0.10 EPE 0.09 Eebep 0.08 eE 0.07 orenpreepprebe & Ed OEmerneprone 0.02 0.01 0.00 EiE wr n vencipee n neves ns biuthindiienibdbar |

Applicant Kyocera FCC ID:: V65C5155 Report #: CT- C5156-9B2-0712-R0 Test Laboratory: Comptest/Kyocera Date: 08/07/2012 FCC C5156 WiFi Flat with 15mm Air Space, Face Up Ch.6, Closed Communication System: WLAN-2450, Frequency: 2437 MHz, Duty Cycle: 1:1 3 Medium: M2450,Medium parameters used: f = 2400 MHz; σ = 1.92 mho/m; εr = 52.8; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.09, 4.09, 4.09), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/27/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C Ch 2450 ch6 Face UP-/Area Scan (71x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.001 mW/g Ch 2450 ch6 Face UP-/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0.354 V/m; Power Drift = 0.123 dB Peak SAR (extrapolated) = 0.242 W/kg SAR(1 g) = 0.021 mW/g; SAR(10 g) = 0.00344 mW/g Maximum value of SAR (measured) = 0.161 mW/g 0 dB = 0.001mW/g © 2012 Comptest Services LLC Page 18 of 20 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5155 Report #: CT- C5156-9B2-0712-R0 Test Laboratory: Comptest/Kyocera Date: 08/07/2012 FCC C5156 WiFi Flat with 15mm Air Space, Face Down Ch.6, Open Communication System: WLAN-2450, Frequency: 2437 MHz, Duty Cycle: 1:1 3 Medium: M2450,Medium parameters used: f = 2400 MHz; σ = 1.92 mho/m; εr = 52.8; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.09, 4.09, 4.09), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/27/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C Ch 2450 ch6 Face DOWN/Area Scan (91x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.044 mW/g Ch 2450 ch6 Face DOWN/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0.960 V/m; Power Drift = -0.053 dB Peak SAR (extrapolated) = 0.086 W/kg SAR(1 g) = 0.00286 mW/g; SAR(10 g) = 0.000426 mW/g Maximum value of SAR (measured) = 0.049 mW/g Ch 2450 ch6 Face DOWN/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0.960 V/m; Power Drift = -0.053 dB Peak SAR (extrapolated) = 0.223 W/kg SAR(1 g) = 0.025 mW/g; SAR(10 g) = 0.00345 mW/g Maximum value of SAR (measured) = 0.132 mW/g 0 dB = 0.044mW/g Test Laboratory: Comptest/Kyocera Date: 08/07/2012 © 2012 Comptest Services LLC Page 19 of 20 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant Kyocera FCC ID:: V65C5155 Report #: CT- C5156-9B2-0712-R0 FCC C5156 WiFi Flat with 15mm Air Space, Face Up Ch.6, Open Communication System: WLAN-2450, Frequency: 2437 MHz, Duty Cycle: 1:1 3 Medium: M2450,Medium parameters used: f = 2400 MHz; σ = 1.92 mho/m; εr = 52.8; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.09, 4.09, 4.09), Calibrated: 5/29/2012 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn603,Calibrated: 9/27/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C Ch 2450 ch6 Face Up-/Area Scan (91x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.111 mW/g Ch 2450 ch6 Face UP-/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.34 V/m; Power Drift = 0.063 dB Peak SAR (extrapolated) = 0.116 W/kg SAR(1 g) = 0.00241 mW/g; SAR(10 g) = 0.000645 mW/g Maximum value of SAR (measured) = 0.110 mW/g Ch 2450 ch6 Face UP-/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.34 V/m; Power Drift = 0.063 dB Peak SAR (extrapolated) = 0.254 W/kg SAR(1 g) = 0.030 mW/g; SAR(10 g) = 0.00345 mW/g Maximum value of SAR (measured) = 0.131 mW/g 0 dB = 0.111mW/g © 2012 Comptest Services LLC Page 20 of 20 SAR Plots Body This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


Document Created: 2012-08-20 15:33:28
Document Modified: 2012-08-20 15:33:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC