Test report for DXX

FCC ID: V5PS90WCDMA

Test Report

Download: PDF
FCCID_1961862

FCC TEST REPORT Report No. : FR330801 FCC RADIO TEST REPORT according to 47 CFR FCC Part 15 Subpart C § 15.225 Equipment : Wireless POS terminal Brand Name : PAX Model No. : S90 WCDMA Filing Type : New Application Applicant : PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong FCC ID : V5PS90WCDMA Manufacturer PAX Computer Technology (Shenzhen) Co., Ltd. 4/F, No.3 Building, Software Park, Second Central Science-Tech Road, High-Tech industrial Park, Shenzhen, Guangdong, P.R.C. Received Date : Mar. 08, 2013 Final Test Date : May 02, 2013 Statement The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International (KUNSHAN) Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.4-2003 and ANSI C63.10-2009 and 47 CFR FCC Part 15 Subpart C. The test equipment used to perform the test is calibrated and traceable to NML/ROC. SPORTON INTERNATIONAL (KUNSHAN) INC. No. 3-2, PingXiang Road, Kunshan, Jiangsu Province, P.R.C. SPORTON INTERNATIONAL (KUNSHAN) INC. Page No. : i of ii TEL : 86-0512-5790-0158 Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 FCC ID : V5PS90WCDMA

FCC TEST REPORT Report No. : FR330801 Table of Contents 1. SUMMARY OF THE TEST RESULT .......................................................................................................................2 2. GENERAL INFORMATION......................................................................................................................................3 2.1 Product Details .........................................................................................................................................................................................3 2.2 Accessories ..............................................................................................................................................................................................3 2.3 Table for Test Modes ...............................................................................................................................................................................4 2.4 Table for Testing Locations ......................................................................................................................................................................4 2.5 Table for Supporting Units .......................................................................................................................................................................4 2.6 Test Configurations ..................................................................................................................................................................................5 3. TEST RESULT .........................................................................................................................................................6 3.1 AC Power Line Conducted Emissions Measurement ..............................................................................................................................6 3.2 Field Strength of Fundamental Emissions and Mask Measurement......................................................................................................11 3.3 20dB Spectrum Bandwidth Measurement .............................................................................................................................................15 3.4 Radiated Emissions Measurement ........................................................................................................................................................17 3.5 Frequency Stability Measurement .........................................................................................................................................................24 3.6 Antenna Requirements ..........................................................................................................................................................................27 4. LIST OF MEASURING EQUIPMENT ....................................................................................................................28 5. TEST LOCATION ...................................................................................................................................................29 APPENDIX A. PHOTOGRAPHS OF EUT APPENDIX B. SETUP PHOTOGRAPHS SPORTON INTERNATIONAL (KUNSHAN) INC. Page No. : ii of ii TEL : 86-0512-5790-0158 Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 FCC ID : V5PS90WCDMA

FCC TEST REPORT Report No. : FR330801 REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FR330801 Rev. 01 Initial issue of report May 02, 2013 SPORTON INTERNATIONAL (KUNSHAN) INC. Page No. : iii of ii TEL : 86-0512-5790-0158 Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 FCC ID : V5PS90WCDMA

FCC TEST REPORT Report No. : FR330801 CERTIFICATE OF COMPLIANCE according to 47 CFR FCC Part 15 Subpart C § 15.225 Equipment : Wireless POS terminal Brand Name : PAX Model No. : S90 WCDMA Applicant : PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong Sporton International as requested by the applicant to evaluate the EMC performance of the product sample received on Mar. 08, 2013 would like to declare that the tested sample has been evaluated and found to be in compliance with the tested rule parts. The data recorded as well as the test configuration specified is true and accurate for showing the sample’s EMC nature. ____________________________ Jones Tsai / Manager Reviewed Data: Jul. 30, 2004 SPORTON INTERNATIONAL (KUNSHAN) INC. No. 3-2, PingXiang Road, Kunshan, Jiangsu Province, P.R.C. SPORTON INTERNATIONAL (KUNSHAN) INC. Report Format Version: a

FCC RF Test Report Report No. : FR330801 1. SUMMARY OF THE TEST RESULT Applied Standard: 47 CFR FCC Part 15 Subpart C Part FCC Rule IC Rule Description of Test Result Under Limit AC Power Line Conducted 12.20dB at 3.1 15.207 Gen 7.2.2 Complies Emissions 27.130MHz Field Strength of Fundamental 51.10dB at 3.2 15.225(a)(b)(c) A2.6 Complies Emissions 13.560MHz 3.3 2.1049 - 20dB Spectrum Bandwidth Complies 15.225(d) 4.69dB at 3.4 A2.6 Radiated Emissions Complies 15.209 40.670MHz 3.5 15.225(e) A2.6 Frequency Stability Complies 3.6 15.203 - Antenna Requirements Complies Test Items Uncertainty Remark AC Power Line Conducted Emissions ±2.3dB Confidence levels of 95% Field Strength of Fundamental Emissions ±0.8dB Confidence levels of 95% -8 20dB Spectrum Bandwidth / Frequency Stability ±8.5×10 Confidence levels of 95% Radiated / Band Edge Emissions (9kHz~30MHz) ±0.8dB Confidence levels of 95% Radiated Emissions (30MHz~1000MHz) ±1.9dB Confidence levels of 95% Temperature ±0.7℃ Confidence levels of 95% Humidity ±3.2% Confidence levels of 95% DC / AC Power Source ±1.4% Confidence levels of 95% SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 2 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 2. GENERAL INFORMATION 2.1 Product Details For more detailed features description, please refer to the manufacturer’s specifications or user’s manual. Items Description Power Type 9.5Vdc from Adapter 7.4Vdc from Li-ion Battery Modulation ASK Channel Number 1 Channel Band Width (99%) 2.240kHz Max. Field Strength 72.90dBuV/m Test Freq. Range 13.553 ~ 13.567MHz Carrier Frequencies 13.56 MHz (Ch. 1) Antenna PCB Antenna 2.2 Accessories Specification of Accessory Brand Name Huntkey Adapter Model Name ADP036-094B Brand Name IES Battery Model Name 25B1001 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 3 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 2.3 Table for Test Modes Investigation has been done on all the possible configurations for searching the worst cases. The following table is a list of the test modes shown in this test report. Test Items Mode Channel AC Power Line Conducted Emissions CTX - Field Strength of Fundamental Emissions CTX 1 20dB Spectrum Bandwidth CTX 1 Radiated Emissions 9kHz~30MHz CTX 1 Radiated Emissions 9kHz~10th Harmonic 1 CTX Band Edge Emissions Frequency Stability Un-modulation 1 Note: 1, CTX=continuously transmitting. 2, The ancillary equipment, NFC card, is used to make the EUT (NFC) continuously transmit at 13.56MHz and is placed around 3 cm gap to the EUT. 2.4 Table for Testing Locations Test Site No. Site Category Location CO01-SZ Conduction Shen Zhen TH01-KS OVEN Room Kun Shan 03CH01-KS SAC Kun Shan Semi Anechoic Chamber (SAC). 2.5 Table for Supporting Units Support Unit Manufacturer Model FCC ID System Simulator Agilent E5515C N/A DC Power Supply GWINSTEK GPS-3030D N/A RF Card N/A N/A N/A SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 4 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 2.6 Test Configurations <AC Conducted Emissions> Fundamental Emissions and Mask Measurement For radiated emissions 9kHz~30MHz/ For radiated emissions 30MHz~1GHz SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 5 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3. TEST RESULT 3.1 AC Power Line Conducted Emissions Measurement 3.1.1 Limit For a Low-power Radio-frequency device which is designed to be connected to the AC power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed below limits table. Frequency (MHz) QP Limit (dBuV) AV Limit (dBuV) 0.15~0.5 66~56 56~46 0.5~5 56 46 5~30 60 50 3.1.2 Measuring Instruments and Setting Please refer to section 4 of equipments list in this report. The following table is the setting of the receiver. Receiver Parameters Setting Attenuation 10 dB Start Frequency 0.15 MHz Stop Frequency 30 MHz IF Bandwidth 9 KHz 3.1.3 Test Procedures 1. Configure the EUT according to ANSI C63.4. The EUT or host of EUT has to be placed 0.4 meter far from the conducting wall of the shielding room and at least 80 centimeters from any other grounded conducting surface. 2. Connect EUT or host of EUT to the power mains through a line impedance stabilization network (LISN). 3. All the support units are connected to the other LISNs. The LISN should provide 50uH/50ohms coupling impedance. 4. The frequency range from 150 KHz to 30 MHz was searched. 5. Set the test-receiver system to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. 6. The measurement has to be done between each power line and ground at the power terminal. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 6 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3.1.4 Test Setup Layout LEGEND: (1) Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 to 40 cm long. (2) I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. (3) EUT connected to one LISN. Unused LISN measuring port connectors shall be terminated in 50 Ω. LISN can be placed on top of, or immediately beneath, reference ground plane. (3.1) All other equipment powered from additional LISN(s). (3.2) Multiple outlet strip can be used for multiple power cords of non-EUT equipment. (3.3) LISN at least 80 cm from nearest part of EUT chassis. (4) Cables of hand-operated devices, such as keyboards, mice, etc., shall be placed as for normal use. (5) Non-EUT components of EUT system being tested. (6) Rear of EUT, including peripherals, shall all be aligned and flush with rear of tabletop. (7) Rear of tabletop shall be 40 cm removed from a vertical conducting plane that is bonded to the ground plane. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 7 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3.1.5 Test Deviation There is no deviation with the original standard. 3.1.6 EUT Operation during Test The EUT was placed on the test table and programmed in transmitting function. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 8 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3.1.7 Results of AC Power Line Conducted Emissions Measurement Final Test Date Apr. 02, 2013 Test Site No. CO01-SZ Temperature 23~24°C Humidity 48~49% Transmitting Mode Test Engineer Leo Liao Configuration (13.56MHz) Mode GSM850 Idle + NFC Tx + Adapter Line SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 9 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 Neutral Note: Level = Read Level + LISN Factor + Cable Loss. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 10 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3.2 Field Strength of Fundamental Emissions and Mask Measurement 3.2.1 Limit Field strength of fundamental emissions limit: The field strength of fundamental emissions shall not exceed 15848 microvolts/meter at 30 meters. The emissions limit in this paragraph is based on measurement instrumentation employing a QP detector. Frequencies Field Strength Field Strength Field Strength (MHz) (microvolts/meter) (dBμV/m) at 10m (dBμV/m) at 3m 13.553 ~ 13.567MHz 15848 at 30m 103.08 (QP) 124 (QP) Mask limit: Rules and specifications CFR 47 Part 15 section 15.225(a)-(d) Compliance with the spectrum mask is tested using a spectrum analyzer with Description RB set to a 1kHz for the band 13.553~13.567MHz Freq. of Field Strength Field Strength Field Strength Field Strength Emission (dBuV/m) at (dBuV/m) at (dBuV/m) at (uV/m) at 30m (MHz) 30m 10m 3m 1.705~13.110 30 29.5 48.58 69.5 13.110~13.410 106 40.5 59.58 80.5 Limit 13.410~13.553 334 50.5 69.58 90.5 13.553~13.567 15848 84.0 103.08 124.0 13.567~13.710 334 50.5 69.58 90.5 13.710~14.010 106 40.5 59.58 80.5 14.010~30.000 30 29.5 48.58 69.5 3.2.2 Measuring Instruments and Setting Please refer to section 4 of equipments list in this report. The following table is the setting of the receiver. Receiver Parameter Setting Attenuation Auto Center Frequency Fundamental Frequency RB 9 kHz Detector QP SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 11 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3.2.3 Test Procedures 1. Configure the EUT according to ANSI C63.4. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the loop receiving antenna mounted antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the receiving antenna was fixed at one meter above ground to find the maximum emissions field strength. 4. For Fundamental emissions, use the receiver to measure QP reading. 5. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 6. Compliance with the spectrum mask is tested using a spectrum analyzer with RB set to a 1kHz for the band 13.553~13.567MHz. 3.2.4 Test Setup Layout 3.2.5 Test Deviation There is no deviation with the original standard. 3.2.6 EUT Operation during Test The EUT was programmed to be in continuously transmitting mode. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 12 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3.2.7 Test Result of Field Strength of Fundamental Emissions Final Test Date May 02, 2013 Test Site No. 03CH01-KS Temperature 22~23°C Humidity 41% ~ 42% Test Engineer Stone Gu Configurations Ch. 1 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 13 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 Note: Emission level (dBuV/m) = 20 log Emission level (uV/m). Measured distance is 3m. All emissions emit form non-NFC function of digital unintentional emissions. All NFC’s spurious emissions are below 20dB of limits. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 14 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3.3 20dB Spectrum Bandwidth Measurement 3.3.1 Limit Intentional radiators must be designed to ensure that the 20 dB bandwidth of the emissions in the specific band (13.553 ~ 13.567MHz). 3.3.2 Measuring Instruments and Setting Please refer to section 4 of equipments list in this report. The following table is the setting of the spectrum analyzer. Spectrum Parameters Setting Attenuation Auto Span Frequency > 20dB Bandwidth RB 1 kHz VB 1 kHz Detector Peak Trace Max Hold Sweep Time Auto 3.3.3 Test Procedures 1. The transmitter output (antenna port) was connected to the spectrum analyzer in peak hold mode. 2. The resolution bandwidth of 1 kHz and the video bandwidth of 1 kHz were used. 3. Measured the spectrum width with power higher than 20dB below carrier. 3.3.4 Test Setup Layout 3.3.5 Test Deviation There is no deviation with the original standard. 3.3.6 EUT Operation during Test The EUT was programmed to be in continuously transmitting mode. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 15 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3.3.7 Test Result of 20dB Spectrum Bandwidth Final Test Date Apr. 10, 2013 Test Site No. TH01-KS Temperature 23~24°C Humidity 47~48% Test Engineer Lizy Li Configurations Ch. 1 Frequency Frequency 20dB BW 99% OBW Frequency range (MHz) range (MHz) Test Result (kHz) (kHz) fL＞13.553MHz fH＜13.567MHz 13.56 MHz 2.640 2.240 13.55900 13.56164 Complies 20 dB / 99% Bandwidth Plot on 13.56 MHz * RBW 1 kHz Marker 1 [T1 ] * VBW 3 kHz -25.63 dBm Ref 0 dBm * Att 30 dB * SWT 20 ms 13.560360000 MHz 0 ndB [T1] 20.00 dB BW 2.640000000 kHz Temp 1 [T1 ndB] A -10 -45.72 dBm 1 PK * 13.559000000 MHz VIEW -20 Temp 2 [T1 ndB] 1 -45.65 dBm 13.561640000 MHz -30 -40 T1 T2 -50 3DB -60 -70 -80 -90 -100 Center 13.56 MHz 1 kHz/ Span 10 kHz Date: 24.MAR.2013 16:38:09 * RBW 1 kHz Marker 1 [T1 ] * VBW 3 kHz -25.71 dBm Ref 0 dBm * Att 30 dB * SWT 20 ms 13.560360000 MHz 0 OBW 2.240000000 kHz Temp 1 [T1 OBW] -40.03 dBm A -10 13.559220000 MHz 1 PK * Temp 2 [T1 OBW] VIEW -20 -40.47 dBm 1 13.561460000 MHz -30 T1 T2 -40 -50 3DB -60 -70 -80 -90 -100 Center 13.56 MHz 1 kHz/ Span 10 kHz Date: 24.MAR.2013 16:39:13 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 16 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3.4 Radiated Emissions Measurement 3.4.1 Limit The field strength of any emissions which appear outside of 13.553 ~ 13.567MHz band shall not exceed the general radiated emissions limits. Frequencies Field Strength Measurement Distance (MHz) (micorvolts/meter) (meters) 0.009~0.490 2400/F(KHz) 300 0.490~1.705 24000/F(KHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 3.4.2 Measuring Instruments and Setting Please refer to section 4 of equipments list in this report. The following table is the setting of receiver. Receiver Parameter Setting Attenuation Auto Start ~ Stop Frequency 9kHz~150kHz / RB 200Hz for QP Start ~ Stop Frequency 150kHz~30MHz / RB 9kHz for QP Start ~ Stop Frequency 30MHz~1000MHz / RB 120kHz for QP SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 17 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3.4.3 Test Procedures 1. Configure the EUT according to ANSI C63.4. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 6. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 7. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the recorded data should be QP measured by receiver. High – Low scan is not required in this case. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 18 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3.4.4 Test Setup Layout For radiated emissions below 30MHz For radiated emissions above 30MHz 3.4.5 Test Deviation There is no deviation with the original standard. 3.4.6 EUT Operation during Test The EUT was programmed to be in continuously transmitting mode. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 19 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3.4.7 Results of Radiated Emissions (9 kHz~30MHz) Final Test Date Apr. 12, 2013 Test Site No. 03CH01-KS Temperature 23~24°C Humidity 43% ~ 44% Test Engineer Stone Gu Configurations Ch. 1 Horizontal SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 20 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 Vertical Note: 1. Remark 4 is transmitter’s fundamental signal. 2. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. Distance extrapolation factor = 40 log (specific distance / test distance) (dB); Limit line = specific limits (dBuV) + distance extrapolation factor. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 21 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3.4.8 Results for Radiated Emissions (30MHz~1GHz) Final Test Date Apr. 12, 2013 Test Site No. 03CH01-KS Temperature 23~24°C Humidity 43% ~ 44% Test Engineer Stone Gu Configurations Ch. 1 Horizontal SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 22 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 Vertical Note: The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. Emission level (dBuV/m) = 20 log Emission level (uV/m). Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor= Level. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 23 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3.5 Frequency Stability Measurement 3.5.1 Limit The frequency tolerance of the carrier signal shall be maintained within +/- 0.01% (100ppm) of the operating frequency over a temperature variation of -20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. 3.5.2 Measuring Instruments and Setting Please refer to section 4 of equipments list in this report. The following table is the setting of the spectrum analyzer. Spectrum Parameter Setting Attenuation Auto Span Frequency Entire absence of modulation emissions bandwidth RB 1 kHz VB 1 kHz Sweep Time Auto 3.5.3 Test Procedures 1. The transmitter output (antenna port) was connected to the spectrum analyzer. 2. EUT have transmitted absence of modulation signal and fixed channelize. 3. Set the spectrum analyzer span to view the entire absence of modulation emissions bandwidth. 4. Set RBW = 1 kHz, VBW = 1 kHz with peak detector and maxhold settings. 5. fc is declaring of channel frequency. Then the frequency error formula is (fc-f)/fc × 106 ppm and the limit is less than ±100ppm. 6. The test extreme voltage is to change the primary supply voltage from 85 to 115 percent of the nominal value 7. Extreme temperature rule is -20°C~50°C. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 24 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3.5.4 Test Setup Layout 3.5.5 Test Deviation There is no deviation with the original standard. 3.5.6 EUT Operation during Test The EUT was programmed to be in continuously un-modulation transmitting mode. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 25 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3.5.7 Test Result of Frequency Stability Final Test Date Apr. 10, 2013 Test Site No. TH01-KS Temperature 23~24°C Humidity 47~48% Test Engineer Lizy Li Configurations Ch. 1 Voltage vs. Frequency Stability Voltage(V) Measurement Frequency (MHz) 9.5 13.560400 9.0 13.560400 9.975 13.560400 Max. Deviation (MHz) 0.000400 Max. Deviation (ppm) 29.4985 Temperature vs. Frequency Stability Temperature (℃) Measurement Frequency (MHz) -20 13.560400 -10 13.560400 0 13.560360 10 13.560400 20 13.560400 30 13.560400 40 13.560420 50 13.560400 Max. Deviation (MHz) 0.000420 Max. Deviation (ppm) 30.9735 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 26 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 3.6 Antenna Requirements 3.6.1 Limit Except for special regulations, the Low-power Radio-frequency Devices must not be equipped with any jacket for installing an antenna with extension cable. An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that the user can replace a broken antenna, but the use of a standard antenna jack or electrical connector is prohibited. 3.6.2 Antenna Connector Construction Enbedded in Antenna. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 27 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 4. LIST OF MEASURING EQUIPMENT Calibration Instrument Manufacturer Model No. Serial No. Characteristics Test Date Due Date Remark Date Conduction AC LISN EMCO 3816/2SH 00103912 9kHz~30MHz Mar. 28, 2013 Apr. 02, 2013 Mar. 27, 2014 (CO01-SZ) Conduction AC LISN EMCO 3816/2SH 00103892 9kHz~30MHz Mar. 28, 2013 Apr. 02, 2013 Mar. 27, 2014 (CO01-SZ) ESCIO TEST Conduction R&S 1142.8007.03 100724 9K-3GHz Mar. 28, 2013 Apr. 02, 2013 Mar. 27, 2014 Receiver (CO01-SZ) AC Power 616020000891 Conduction Chroma 61602 N/A Nov. 20, 2012 Apr. 02, 2013 Nov. 19, 2013 Source N/A (CO01-SZ) System GSM/WCDMA Conduction Agilent E5515C MY50264168 Sep. 04, 2012 Apr. 02, 2013 Sep. 03, 2013 Simulator /CDMA2000 (CO01-SZ) Spectrum Conducted R&S FSP40 100319 9kHz~40GHz Dec. 29, 2012 Apr. 10, 2013 Dec. 28, 2013 Analyzer (TH01-KS) Conducted Power Meter Agilent E4416A MY45101555 N/A Aug. 22, 2012 Apr. 10, 2013 Aug. 21, 2013 (TH01-KS) Conducted Power Sensor Agilent E9327A MY44421198 N/A Aug. 22, 2012 Apr. 10, 2013 Aug. 21, 2013 (TH01-KS) DC Power Conducted GWINSTEK GPS-3030D E1884515 N/A Aug. 22, 2012 Apr. 10, 2013 Aug. 21, 2013 Supply (TH01-KS) Thermal Conducted Ten Billion TTC-B3S TBN-960502 N/A Dec. 29, 2012 Apr. 10, 2013 Dec. 28, 2013 Chamber (TH01-KS) EMI Test Apr. 12, 2013~ Radiation R&S ESCI 100534 9kHz~3GHz Nov. 08, 2012 Nov. 07, 2013 Receiver May 02, 2013 (03CH01-KS) Spectrum Apr. 12, 2013~ Radiation R&S FSP30 100400 9kHz~30GHz Jun. 01, 2012 May 31, 2013 Analyzer May 02, 2013 (03CH01-KS) Apr. 12, 2013~ Radiation Bilog Antenna SCHAFFNER CBL6112D 23182 25MHz~2GHz Dec. 07, 2012 Dec. 06, 2013 May 02, 2013 (03CH01-KS) HFH2-Z2 Loop Apr. 12, 2013~ Radiation R&S HFH2-Z2 100321 9KHZ-30MHZ Oct. 22, 2012 Oct. 21, 2013 Antenna May 02, 2013 (03CH01-KS) Apr. 12, 2013~ Radiation Amplifier com-power PA-103A 161069 1MHz~1GHz Jun. 01, 2012 May 31, 2013 May 02, 2013 (03CH01-KS) Apr. 12, 2013~ Radiation Amplifier Agilent 8449B 3008A02370 1GHz~26.5GHz Dec. 29, 2012 Dec. 28, 2013 May 02, 2013 (03CH01-KS) SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 28 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 5. TEST LOCATION SHIJR ADD : 6Fl., No. 106, Sec. 1, Shintai 5th Rd., Shijr City, Taipei, Taiwan 221, R.O.C. TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 HWA YA ADD : No. 52, Hwa Ya 1st Rd., Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. TEL : 886-3-327-3456 FAX : 886-3-318-0055 LINKOU ADD : No. 30-2, Dingfu Tsuen, Linkou Shiang, Taipei, Taiwan 244, R.O.C TEL : 886-2-2601-1640 FAX : 886-2-2601-1695 DUNGHU ADD : No. 3, Lane 238, Kangle St., Neihu Chiu, Taipei, Taiwan 114, R.O.C. TEL : 886-2-2631-4739 FAX : 886-2-2631-9740 JUNGHE ADD : 7Fl., No. 758, Jungjeng Rd., Junghe City, Taipei, Taiwan 235, R.O.C. TEL : 886-2-8227-2020 FAX : 886-2-8227-2626 NEIHU ADD : 4Fl., No. 339, Hsin Hu 2nd Rd., Taipei 114, Taiwan, R.O.C. TEL : 886-2-2794-8886 FAX : 886-2-2794-9777 JHUBEI ADD : No.8, Lane 728, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. TEL : 886-3-656-9065 FAX : 886-3-656-9085 KUNSHAN ADD : No. 3-2, PingXiang Road, Kunshan, Jiangsu Province, P.R.C. TEL : +86-0512-5790-0158 FAX : +86-0512-5790-0958 No. 3 Building, the third floor of south, Shahe River west, Fengzeyuan warehouse, SHENZHEN ADD : Nanshan District, Shenzhen, Guangdong, P.R.C. TEL : +86-755- 3320-2398 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 29 of 29 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA

FCC RF Test Report Report No. : FR330801 Appendix A. Photographs of EUT Please refer to Sporton report number EP330801 as below. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : A1 of A1 TEL : 86-0512-5790-0158 Report Issued Date : May 02, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : V5PS90WCDMA


Document Created: 2019-11-02 07:38:14
Document Modified: 2019-11-02 07:38:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC