User manual

FCC ID: V5PIM304GBW

Users Manual

Download: PDF
FCCID_4435002

P/N: 200312000000437 Quick Setup Guide Compliance Statements • Reorient or relocate the receiving antenna. Le présent appareil est conforme aux CNR d'Industrie Déclaration d'exposition aux radiations: • Increase the separation between the equipment and Canada applicables aux appareils radio exempts de Cet équipement est conforme aux limites d'exposition receiver. licence. L'exploitation est autorisée aux deux conditions aux rayonnements IC établies pour un environnement FCC COMPLIANCE STATEMENT • Connect the equipment into an outlet on a circuit suivantes: non contrôlé. Cet équipement doit être installé et utilisé IM30 This device complies with Part 15 of the FCC Rules. different from that to which the receiver is connected. 1) l'appareil ne doit pas produire de brouillage, et avec un minimum de 20 cm de distance entre la source Operation is subject to the following two conditions: • Consult the dealer or an experienced radio/TV 2) l'utilisateur de l'appareil doit accepter tout brouillage de rayonnement et votre corps. POS TERMINAL technician for help. radioélectrique subi, même si le brouillage est 1) this device may not cause harmful interference, and PAX TECHNOLOGY LIMITED reserves Caution susceptible d'en compromettre le fonctionnement. Index of Icons the right to change product specifications 2) this device must accept any interference received, without prior notification. including interference that may cause undesired Any changes or modifications not expressly approved by the manufacturer could void the user's authority to This device and its antenna(s) must not be co-located or 7 operation. operating in conjunction with any other antenna or operate this equipment. transmitter, except tested built-in radios. do not throw away, requires professional recycling Warning Radiation Exposure Cet appareil et son antenne ne doivent pas être situés ou This equipment has been tested and found to comply with Class II equipment the limits for a Class B digital device, pursuant to Part 15 This device complies with FCC radiation exposure limits fonctionner en conjonction avec une autre antenne ou un of the FCC Rules. These limits are designed to provide for general environments. autre émetteur, exception faites des radios intégrées qui for indoor use only reasonable protection against harmful interference in a ont été testées. INDUSTRY CANADA STATEMENT residential installation. The Country Code Selection feature is disabled for VI energy efficiency marking (level VI) This device complies with Industry Canada license-exempt products marketed in the US/Canada. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in RSS standard(s).Operation is subject to the following two conditions: La fonction de sélection de l’indicatif du pays est ~ AC voltage accordance with the instructions, may cause harmful désactivée pour les produits commercialisés aux États- DC voltage 1) this device may not cause interference, and interference to radio communications. Unis et au Canada. 2) this device must accept any interference, including However, there is no guarantee that interference will not Radiation Exposure Statement Manufacturer: PAX Computer Technology (Shenzhen) Co., Ltd. interference that may cause undesired operation of Address: 4FL, Building #3, Software Park, 2nd Central Science-Tech RD, occur in a particular installation. If this equipment does This equipment complies with IC radiation exposure limits the device. High-Tech Industrial Park, Shenzhen, Guangdong, PRC cause harmful interference to radio or television set forth for an uncontrolled environment. This Tel: 0755-86169630 Fax: 0755-86169634 reception, which can be determined by turning the equipment should be installed and operated with Website: http://www.pax.com.cn equipment off and on, the user is encouraged to try to minimum distance 20cm between the radiator & your correct the interference by one of the following measures: body. 7 8 9 10

Contents Installation 2) Clearance Holes and Dimensions 2) Environmental Conditions 56.67 Storage Temperature: -30°C~70°C (-22°F~158°F) 105.00 31.50 82.00 Working Temperature: -20°C~70°C (-4F~158°F) The following items are included with your POS 7 1) SAM and SIM Cards Relative Humidity: 5%~95% (no condensation) terminal. If any items are missing, contact your dealer. Maintenance and Usage 107.00 146.00 8 Name Quantity IM30 POS terminal 1 2 9 10 5 IM30 mounting bracket 1 1 11 1) If any cables become damaged, seek a replacement. M4 nuts 4 12 Figure 6: device dimensions (mm) 2) Do not insert unknown materials into any port on 4 M4 screws 4 3 13 3) Recommended Device Installation the IM30, this may cause serious damage to the device. IM30 product manual 1 Figure 4: SAM card mounts (main body) 14 3) If repairs are required, please contact a professional 5 Front Left Right M4 nuts technician instead of attempting them on your own. Product Description M4 screws 4) The IM30 contains tamper-proofing features; these 6 IM30 Figure 5: SAM and SIM card mounts (SAM module) mounting bracket circuits will trigger if the device is disassembled, at 2 which point it will have to be rearmed before the Unscrew the SAM card module and then remove it by device is ready to resume operation. 1. LCD touchscreen 8 prying at the notch set to its side. On the main body of 2. front facing camera Figure 2: Back view the IM30, there are 2 micro-SIM sized SAM card slots. 5) The IM30 is designed for outdoor use; however, during 3. magnetic strip card reader Figure 7: installation and mounting normal use its surface should still be keep clear of dirt 1 Top Open the mount and insert the card into the slot with 4. smart card reader 3 8. SAM card module the clipped corner of the card to the upper right, then Instructions and possible liquid contaminants. 5. code scanning camera 1. RS232-A (device) 6. camera locator light 2. RS232-B (host) 9. USB Type A port (host) lock the mount with the card inside. 6) While the IM30 is designed to resist ingress of dust and 7. status indicator 7 3. auxiliary jack (mic + speaker) 10. USB Type C port (OTG) The SAM card module comes in 3 configurations, the liquids, it is not designed to resist pressurized liquids 8. contactless card interface 4. Ethernet port 11. service button first has no functional card slots, the second has a 1) Switching the device on and off such as water hoses. Keep the back of the device away 4 5 5. digitial I/O 12. reset button mini-SIM sized SIM card slot located to the left, and from dust and liquids as much as possible. 6 6. Executive/MDB port 13. HDMI port Switch on: Link the IM30 to a power source via the 7. 3G/4G antenna 14. MDB port Back Bottom the last has an additional 2 mini-SIM sized SAM card MDB, Executive, or RS232-A ports. 7) Make sure the various cables connect to provide the slots to the right of the SIM card slot. Install the cards Switch off: Disconnect the IM30 from the power appropriate voltages at the proper pins. Figure 1: Front view with the clipped corner facing inwards and to the right. terminal it is connected to. Figure 3: View from all sides 1 2 3 4 5 6

Antenna Manufacturer: PAX Computer Technology(Shenzhen) Co. Ltd. WCDMA Antenna type: External Antenna Antenna gain: WCDMA Band V: 2.3 dBi WCDMA Band II: 2.3 dBi WCDMA Band IV: 2.3 dBi LTE Antenna type: External Antenna Antenna gain: LTE Band 2: 3.4dBi LTE Band 4: 3.4dBi LTE Band 5: 3.4dBi LTE Band 12: 3.4dBi LTE Band 13: 3.4dBi LTE Band 17: 3.4dBi LTE Band 66: 3.4dBi LTE Band 71: 3.4dBi FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with Minimum distances 20 cm between the radiator include antenna & your body.


Document Created: 2019-09-07 08:40:13
Document Modified: 2019-09-07 08:40:13
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC