Test report

FCC ID: V5PD200V4

Test Report

Download: PDF
FCCID_3223862

FCC RF Test Report Report No. : FR6N0307D FCC RF Test Report APPLICANT : PAX Technology Limited EQUIPMENT : Mobile Payment Terminal BRAND NAME : PAX MODEL NAME : D200 MARKETING NAME : D200 FCC ID : V5PD200V4 STANDARD : FCC Part 15 Subpart C §15.225 CLASSIFICATION : (DXX) Low Power Communication Device Transmitter The testing was completed on Nov. 22, 2016. We, SPORTON INTERNATIONAL (SHENZHEN) INC., would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL (SHENZHEN) INC., the test report shall not be reproduced except in full. Prepared by: Eric Shih / Manager Approved by: Jones Tsai / Manager SPORTON INTERNATIONAL (SHENZHEN) INC. 1F & 2F, Building A, Morning Business Center, No. 4003 ShiGu Rd., Xili Town, Nanshan District, Shenzhen, Guangdong, P. R. China SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 1 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D TABLE OF CONTENTS SUMMARY OF THE TEST RESULT ...........................................................................................................................4 1. GENERAL INFORMATION......................................................................................................................................5 1.1 Applicant......................................................................................................................................................................... 5 1.2 Manufacturer .................................................................................................................................................................. 5 1.3 Product Feature of Equipment Under Test ..................................................................................................................... 5 1.4 Product Specification of Equipment Under Test ............................................................................................................. 5 1.5 Modification of EUT ........................................................................................................................................................ 6 1.6 Testing Location ............................................................................................................................................................. 6 1.7 Applicable Standards...................................................................................................................................................... 6 2. TEST CONFIGURATION OF EQUIPMENT UNDER TEST ....................................................................................7 2.1 Descriptions of Test Mode .............................................................................................................................................. 7 2.2 Connection Diagram of Test System .............................................................................................................................. 7 2.3 Table for Supporting Units .............................................................................................................................................. 8 2.4 EUT Operation Test Setup ............................................................................................................................................. 8 3. TEST RESULTS .......................................................................................................................................................9 3.1 AC Power Line Conducted Emissions Measurement ..................................................................................................... 9 3.2 20dB and 99% OBW Spectrum Bandwidth Measurement............................................................................................ 11 3.3 Frequency Stability Measurement ................................................................................................................................ 12 3.4 Field Strength of Fundamental Emissions and Mask Measurement............................................................................. 13 3.5 Radiated Emissions Measurement ............................................................................................................................... 15 3.6 Antenna Requirements ................................................................................................................................................. 18 4. LIST OF MEASURING EQUIPMENT ....................................................................................................................19 APPENDIX A. TEST RESULTS OF CONDUCTED EMISSION TEST APPENDIX B. TEST RESULTS OF CONDUCTED TEST ITEMS B1. Test Result of 20dB Spectrum Bandwidth B2. Test Result of Frequency Stability APPENDIX C. TEST RESULTS OF RADIATED TEST ITEMS C1. Test Result of Field Strength of Fundamental Emissions C2. Results of Radiated Emissions (9 kHz~30MHz) C3. Results of Radiated Emissions (30MHz~1GHz) APPEDNIX D. SETUP PHOTOGRAPHS SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 2 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FR6N0307D Rev. 01 Initial issue of report Dec. 08, 2016 SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 3 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D SUMMARY OF THE TEST RESULT Applied Standard: 47 CFR FCC Part 15 Subpart C / IC RSS-210 issue 9 Part FCC Rule IC Rule Description of Test Result Under Limit AC Power Line Conducted 10.73 dB at 3.1 15.207 RSS-GEN 8.8 Complies Emissions 0.990MHz 15.215(c) - 20dB Spectrum Bandwidth Complies - 3.2 99% OBW Spectrum - RSS-GEN 6.6 Complies - Bandwidth 3.3 15.225(e) B.6 Frequency Stability Complies - Field Strength of 57.63 dB at 3.4 15.225(a)(b)(c) B.6 Complies Fundamental Emissions 13.560 MHz 5.11 dB at 15.225(d) 3.5 B.6 Radiated Emissions Complies 57.160 MHz 15.209 for Quasi-Peak 3.6 15.203 - Antenna Requirements Complies - Test Items Uncertainty Remark AC Power Line Conducted Emissions ±2.5dB Confidence levels of 95% Radiated Emissions (30MHz~1000MHz) ±5.1dB Confidence levels of 95% SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 4 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D 1. GENERAL INFORMATION 1.1 Applicant PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong 1.2 Manufacturer PAX Computer Technology (Shenzhen) Co., Ltd. 4/F, No.3 Building, Software Park, Second Central Science-Tech Road, High-Tech industrial Park, Shenzhen, Guangdong, P.R.C. 1.3 Product Feature of Equipment Under Test Product Feature Equipment Mobile Payment Terminal Brand Name PAX Model Name D200 Marketing Name D200 FCC ID V5PD200V4 GPRS/EGPRS/WCDMA/HSPA/HSPA+ (16QAM uplink is not supported)/NFC EUT supports Radios application WLAN2.4GHz 802.11b/g/n HT20 Bluetooth v3.0+EDR/v4.0 LE Conducted: N/A IMEI Code Conduction: 354524043890848 Radiated: 354524043787499 EUT Stage Production Unit Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. 1.4 Product Specification of Equipment Under Test Standards-related Product Specification Tx/Rx Frequency Range 13.553 ~ 13.567MHz Channel Number 1 20dBW 2.64kHz 99%OBW 2.24kHz Antenna Type Loop Antenna Type of Modulation ASK Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 5 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

womecs. _FCC RF Test Report Report No. : FR6NO307D 1.5 Modification of EUT No modifications are made to the EUT during all test items. 1.6 Testing Location Test Site SPORTON INTERNATIONAL (SHENZHEN) INC. 1F & 2F, Building A, Morning Business Center, No. 4003 ShiGu Rd., Xili Town, Nanshan District, Shenzhen, Guangdong, P. R. China Test Site Location TEL: +86—755—8637—9589 FAX: +86—755—8637—9595 Sporton Site No. Test Site No. THO1—SZ coot—sz Test Engineer Wilson Chen Tao Cheng Temperature 24~26°0 21~230 Relative Humidity 50~53% 41~42% Test Site SPORTON INTERNATIONAL (SHENZHEN) INC. No. 3 Building, the third floor of south, Shahe River west, Fengzeyuan Test Site Location warehouse, Nanshan District, Shenzhen, Guangdong, P. R. China TEL: +86—755—3320—2398 Sporton Site No. FCC/IC Registration No. Test Site No. 03CHO3—S2 Test Engineer Jeff Yao 565805/4086F Temperature 23~250 Relative Humidity 48~52% Note: The test site complies with ANSI C63.4 2014 requirement. 1.7 Applicable Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: + FCC Part 15 Subpart C §15.225 + ANSI C63.10—2013 +. IC RSS—210 Issue 9 +. IC RSS—Gen Issue 4 SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number 6 of 19 TEL: 86—765—8637—9580 Report Issued Date Dec. 08, 2016 PAX Be—rss—sea7—9505 Report Version Rev 01 FG ID VEPD200V4 Report Template No.: BU&FR1SCNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D 2. TEST CONFIGURATION OF EQUIPMENT UNDER TEST 2.1 Descriptions of Test Mode Investigation has been done on all the possible configurations for searching the worst cases. The following table is a list of the test modes shown in this test report. Test Items AC Power Line Conducted Emissions Field Strength of Fundamental Emissions 20dB Spectrum Bandwidth Frequency Stability Radiated Emissions 9kHz~30MHz Radiated Emissions 30MHz~1GHz The EUT pre-scanned in three NFC type, A, B, F. Pre-scanned tests, X, Y, Z in three orthogonal panels to determine the final configuration (Z plane as worst plane) from all possible combinations. 2.2 Connection Diagram of Test System <AC Conducted Emissions> SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 7 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D < For Fundamental Emissions and Mask and Radiated Emissions Measurement > 2.3 Table for Supporting Units Support Unit Manufacturer Model FCC ID System Simulator Anritsu MT8820C N/A WLAN AP D-Link DIR-820L KA2IR820LA1 NOTE BOOK Lenovo E540 FCC DoC Mobile Phone Huawei mate 8 QWSEVA-L09 2.4 EUT Operation Test Setup The EUT was programmed to be in continuously transmitting mode. The ancillary equipment, NFC card, is used to make the EUT (NFC) continuously transmit at 13.56MHz and is placed around 3 cm gap to the EUT. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 8 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D 3. TEST RESULTS 3.1 AC Power Line Conducted Emissions Measurement 3.1.1 Limit of AC Conducted Emission For equipment that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits in the following table. Frequency of Emission Conducted Limit (dBμV) (MHz) Quasi-Peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 *Decreases with the logarithm of the frequency. For terminal test result, the testing follows FCC KDB 174176. 3.1.2 Measuring Instruments See list of measuring instruments of this test report. 3.1.3 Test Procedures 1. The EUT was placed 0.4 meter from the conducting wall of the shielding room, and it was kept at least 80 centimeters from any other grounded conducting surface. 2. Connect EUT to the power mains through a line impedance stabilization network (LISN). 3. All the support units are connecting to the other LISN. 4. The LISN provides 50 ohm coupling impedance for the measuring instrument. 5. The FCC states that a 50 ohm, 50 microhenry LISN should be used. 6. Both sides of AC line were checked for maximum conducted interference. 7. The frequency range from 150 kHz to 30 MHz was searched. 8. Set the test-receiver system to Peak Detect Function and specified bandwidth (IF Bandwidth = 9kHz) with Maximum Hold Mode. Then measurement is also conducted by Average Detector and Quasi-Peak Detector Function respectively. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 9 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D 3.1.4 Test setup 3.1.5 Test Result of AC Conducted Emission Please refer to Appendix A. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 10 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D 3.2 20dB and 99% OBW Spectrum Bandwidth Measurement 3.2.1 Limit Intentional radiators must be designed to ensure that the 20dB and 99% emission bandwidth in the specific band 13.553~13.567MHz. 3.2.2 Measuring Instruments See list of measuring instruments of this test report. 3.2.3 Test Procedures 1. The spectrum analyzer connected via a receive antenna placed near the EUT in peak Max hold mode. 2. The resolution bandwidth of 1 kHz and the video bandwidth of 3 kHz were used. 3. Measured the spectrum width with power higher than 20dB below carrier. 4. Measured the 99% OBW. 3.2.4 Test Setup 3.2.5 Test Result of Conducted Test Items Please refer to Appendix B. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 11 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D 3.3 Frequency Stability Measurement 3.3.1 Limit The frequency tolerance of the carrier signal shall be maintained within +/- 0.01% (100ppm) of the operating frequency over a temperature variation of -20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. 3.3.2 Measuring Instruments See list of measuring instruments of this test report. 3.3.3 Test Procedures 1. The spectrum analyzer connected via a receive antenna placed near the EUT. 2. EUT have transmitted signal and fixed channelize. 3. Set the spectrum analyzer span to view the entire emissions bandwidth. 4. Set RBW = 1 kHz, VBW = 3 kHz with peak detector and maxhold settings. 6 5. The fc is declaring of channel frequency. Then the frequency error formula is (fc-f)/fc × 10 ppm and the limit is less than ±100ppm. 6. Extreme temperature rule is -20°C~50°C. 3.3.4 Test Setup 3.3.5 Test Result of Conducted Test Items Please refer to Appendix C. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 12 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D 3.4 Field Strength of Fundamental Emissions and Mask Measurement 3.4.1 Limit FCC CFR 47 Part 15 section 15.225 Rules and specifications IC RSS-210 B.6 Description Compliance with the spectrum mask is tested with RBW set to 9kHz. Field Strength Field Strength Field Strength Field Strength Freq. of Emission (MHz) (μV/m) at 30m (dBμV/m) at 30m (dBμV/m) at 10m (dBμV/m) at 3m 1.705~13.110 30 29.5 48.58 69.5 13.110~13.410 106 40.5 59.58 80.5 13.410~13.553 334 50.5 69.58 90.5 13.553~13.567 15848 84.0 103.08 124.0 13.567~13.710 334 50.5 69.58 90.5 13.710~14.010 106 40.5 59.58 80.5 14.010~30.000 30 29.5 48.58 69.5 3.4.2 Measuring Instruments See list of measuring instruments of this test report. 3.4.3 Test Procedures 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the loop receiving antenna mounted antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the receiving antenna was fixed at one meter above ground to find the maximum emissions field strength. 4. For Fundamental emissions, use the receiver to measure QP reading. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 13 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D 5. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 6. Compliance with the spectrum mask is tested with RBW set to 9kHz. Note: Emission level (dBμV/m) = 20 log Emission level (μV/m). 3.4.4 Test Setup For radiated emissions below 30MHz 3.4.5 Test Result of Field Strength of Fundamental Emissions and Mask Please refer to Appendix C. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 14 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D 3.5 Radiated Emissions Measurement 3.5.1 Limit The field strength of any emissions which appear outside of 13.110 ~14.010MHz band shall not exceed the general radiated emissions limits. Frequencies Field Strength Measurement Distance (MHz) (μV/m) (meters) 0.009~0.490 2400/F(kHz) 300 0.490~1.705 24000/F(kHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 3.5.2 Measuring Instruments See list of measuring instruments of this test report. 3.5.3 Measuring Instrument Setting The following table is the setting of receiver. Receiver Parameter Setting Attenuation Auto Frequency Range: 9kHz~150kHz RBW 200Hz for QP Frequency Range: 150kHz~30MHz RBW 9kHz for QP Frequency Range: 30MHz~1000MHz RBW 120kHz for Peak Note: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90 kHz, 110-490 kHz. Radiated emission limits in these two bands are based on measurements employing an average detector. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 15 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D 3.5.4 Test Procedures 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 1. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 2. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 3. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 4. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 5. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 6. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the recorded data should be QP measured by receiver. Antenna Requirements SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 16 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D 3.5.5 Test Setup For radiated emissions below 30MHz For radiated emissions above 30MHz 3.5.6 Test Result of Radiated Emissions Measurement Please refer to Appendix C. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 17 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D 3.6 Antenna Requirements 3.6.1 Standard Applicable Except for special regulations, the Low-power Radio-frequency Devices must not be equipped with any jacket for installing an antenna with extension cable. An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that the user can replace a broken antenna, but the use of a standard antenna jack or electrical connector is prohibited. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the FCC rule. 3.6.2 Antenna Anti-Replacement Construction An embedded-in antenna design is used. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 18 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D 4. LIST OF MEASURING EQUIPMENT Calibration Instrument Manufacturer Model No. Serial No. Characteristics Test Date Due Date Remark Date Spectrum Nov. 10, 2016~ Conducted R&S FSP40 100319 9kHz~40GHz Oct. 13, 2016 Oct. 12, 2017 Analyzer Nov. 14, 2016 (TH01-KS) Thermal Ten Billion Nov. 10, 2016~ Conducted LP-150U H2014081803 -40~+150°C Jul. 16, 2016 Jul. 15, 2017 Chamber Hongzhangroup Nov. 14, 2016 (TH01-SZ) EMI Test Nov. 21, 2016~ Radiation KEYSIGHT N9038A MY54450083 20Hz~8.4GHz May 07, 2016 May 06, 2017 Receiver&SA Nov. 22, 2016 (03CH03-SZ) Nov. 21, 2016~ Radiation Loop Antenna R&S HFH2-Z2 100354 9kHz~30MHz May 07, 2016 May 06, 2017 Nov. 22, 2016 (03CH03-SZ) Nov. 21, 2016~ Radiation Bilog Antenna TeseQ CBL6112D 35408 30MHz~2GHz May 21, 2016 May 20, 2017 Nov. 22, 2016 (03CH03-SZ) 0.01Hz Nov. 21, 2016~ Radiation Amplifier Burgeon BPA-530 102210 Oct. 11, 2016 Oct. 10, 2017 ~3000MHz Nov. 22, 2016 (03CH03-SZ) AC Power Nov. 21, 2016~ Radiation Chroma 61601 616010001985 N/A NCR NCR Source Nov. 22, 2016 (03CH03-SZ) Nov. 21, 2016~ Radiation Turn Table EM EM1000 N/A 0~360 degree NCR NCR Nov. 22, 2016 (03CH03-SZ) Nov. 21, 2016~ Radiation Antenna Mast EM EM1000 N/A 1 m~4 m NCR NCR Nov. 22, 2016 (03CH03-SZ) Conduction EMI Receiver R&S ESCI7 100724 9kHz~3GHz Nov. 23, 2015 Nov. 10, 2016 Nov. 22, 2016 (CO01-SZ) Conduction AC LISN EMCO 3816/2SH 00103892 9kHz~30MHz Jan.12, 2016 Nov. 10, 2016 Jan. 11, 2017 (CO01-SZ) AC LISN Conduction (for auxiliary MessTec 3816/2SH 00103912 9kHz~30MHz Jan.12, 2016 Nov. 10, 2016 Jan. 11, 2017 (CO01-SZ) equipment) AC Power Conduction Chroma 61602 616020000891 100Vac~250Vac Jul. 16, 2016 Nov. 10, 2016 Jul. 15, 2017 Source (CO01-SZ) LIT-153 Conduction Pulse Limiter COM-POWER Transient 53139 150kHz~30MHz Oct. 11, 2016 Nov. 10, 2016 Oct. 10, 2017 (CO01-SZ) Limiter NCR: No Calibration Required SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 19 of 19 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D Appendix A. Test Results of Conducted Emission Test Test Mode : NFC Tx Test Voltage : 120Vac / 60Hz GPRS1900 Idle + Bluetooth Link + WLAN Link + USB Cable (Charging from Function Type : Adapter) + NFC Tx (1) with antenna Remark: 13.56MHz is the NFC RF fundamental signal. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : A1 of A4 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D Test Mode : NFC Tx Test Voltage : 120Vac / 60Hz GPRS1900 Idle + Bluetooth Link + WLAN Link + USB Cable (Charging from Function Type : Adapter) + NFC Tx (1) with antenna Remark: 13.56MHz is the NFC RF fundamental signal. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : A2 of A4 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D Test Mode : NFC Tx Test Voltage : 120Vac / 60Hz GPRS1900 Idle + Bluetooth Link + WLAN Link + USB Cable (Charging from Function Type : Adapter) + NFC Tx (2) With dummy load Remark: Only the fundamental NFC signal needs to be retested per C63.4. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : A3 of A4 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D Test Mode : NFC Tx Test Voltage : 120Vac / 60Hz GPRS1900 Idle + Bluetooth Link + WLAN Link + USB Cable (Charging from Function Type : Adapter) + NFC Tx (2) With dummy load Remark: Only the fundamental NFC signal needs to be retested per C63.4. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : A4 of A4 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D Appendix B. Test Results of Conducted Test Items B1. Test Result of 20dB Spectrum Bandwidth Test mode NFC Tx Test Frequency (MHz) 13.56 * RBW 1 kHz Marker 1 [T1 ] * RBW 1 kHz Marker 1 [T1 ] * VBW 3 kHz 3.36 dBm * VBW 3 kHz 2.81 dBm Ref 10 dBm Att 40 dB SWT 20 ms 13.560300000 MHz Ref 10 dBm Att 30 dB SWT 20 ms 13.560300000 MHz 10 ndB [T1] 20.00 dB 10 OBW 2.240000000 kHz 1 1 BW 2.640000000 kHz Temp 1 [T1 OBW] Temp 1 [T1 ndB] A -11.92 dBm A 0 0 SGL SGL -16.78 dBm 13.559140000 MHz 1 PK 1 PK 13.558940000 MHz Temp 2 [T1 OBW] MAXH MAXH T1 T2 -10 Temp 2 [T1 ndB] -10 -11.35 dBm T1 T2 -16.46 dBm 13.561380000 MHz 13.561580000 MHz -20 -20 -30 -30 -40 -40 3DB 3DB -50 -50 -60 -60 -70 -70 -80 -80 -90 -90 Center 13.56 MHz 1 kHz/ Span 10 kHz Center 13.56 MHz 1 kHz/ Span 10 kHz Date: 14.NOV.2016 09:49:15 Date: 11.NOV.2016 17:47:21 20dB Bandwidth (kHz) 2.64 99% OccupiedBW(kHz) 2.24 fL＞13.553 13.55894 Test Result Frequency range (MHz) fH＜13.567 13.56158 Complies SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : B1 of B2 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D B2. Test Result of Frequency Stability Voltage vs. Frequency Stability Temperature vs. Frequency Stability Measurement Measurement Voltage (Vac) Temperature (℃) Frequency (MHz) Frequency (MHz) 120 13.56026 -20 13.56026 102 13.56026 -10 13.56026 138 13.56027 0 13.56027 - - 10 13.56028 - - 20 13.56026 - - 30 13.56026 - - 40 13.56026 - - 50 13.56026 Max.Deviation (MHz) 0.00027 Max.Deviation (MHz) 0.00028 Max.Deviation (ppm) 19.9115 Max.Deviation (ppm) 20.649 Limit FS < ±100 ppm Limit FS < ±100 ppm Test Result PASS Test Result PASS SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : B2 of B2 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D Appendix C. Test Results of Radiated Test Items C1. Test Result of Field Strength of Fundamental Emissions Test Mode : NFC Tx Test Frequency (MHz) 13.56 SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : C1 of C3 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D C2. Results of Radiated Spurious Emissions (9 kHz~30MHz) Test Mode : NFC Tx Polarization : Horizontal Frequency Level Over Limit Read Antenna Cable Ant Table Remark Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 0.02007 44.66 -76.9 121.56 23.51 21 0.15 - - Average 0.07134 44.98 -65.56 110.54 23.73 21.1 0.15 - - Average 0.09519 40.49 -67.54 108.03 19.14 21.2 0.15 - - QP 0.12 33.82 -72.2 106.02 12.57 21.1 0.15 - - Average 0.15 43.96 -60.12 104.08 22.81 21 0.15 - - Average 4.61 34.27 -35.73 70 13.35 20.66 0.26 - - QP 14.064 36.11 -33.89 70 15.39 20.29 0.43 - - QP 18.403 32.77 -37.23 70 12.05 20.24 0.48 - - QP 25.495 32.95 -37.05 70 11.59 20.78 0.58 - - QP Test Mode : NFC Tx Polarization : Vertical Frequency Level Over Limit Read Antenna Cable Ant Table Remark Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 0.02007 44.91 -76.65 121.56 23.76 21 0.15 - - Average 0.06024 43.75 -68.26 112.01 22.5 21.1 0.15 - - Average 0.0951 33.87 -74.17 108.04 12.52 21.2 0.15 - - QP 0.1263 29.16 -76.42 105.58 7.91 21.1 0.15 - - Average 0.15555 42.97 -60.8 103.77 21.82 21 0.15 - - Average 6.506 34.82 -35.18 70 13.89 20.64 0.29 - - QP 13.984 36.74 -33.26 70 16.01 20.31 0.42 - - QP 16.576 33.68 -36.32 70 13.06 20.16 0.46 - - QP 25.04 33.68 -36.32 70 12.22 20.89 0.57 - - QP Note: 1. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 2. Distance extrapolation factor = 40 log (specific distance / test distance) (dB); 3. Limit line = specific limits (dBμV) + distance extrapolation factor. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : C2 of C3 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2

FCC RF Test Report Report No. : FR6N0307D C3. Results of Radiated Spurious Emissions (30MHz~1GHz) Test Mode : NFC Tx Polarization : Horizontal Frequency Level Over Limit Read Antenna Cable Ant Table Remark Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 99.84 33.95 -9.55 43.5 44.76 18.8 0.99 - - Peak 230.79 29.57 -16.43 46 41.56 17.08 1.4 - - Peak 333.61 34.13 -11.87 46 42.81 19.98 1.71 - - Peak 600.36 34.11 -11.89 46 36.76 25.1 2.25 - - Peak 800.18 36.9 -9.1 46 36.61 27.4 2.59 - - Peak 867.11 37.19 -8.81 46 6.24 28.24 2.71 100 0 Peak Test Mode : NFC Tx Polarization : Vertical Frequency Level Over Limit Read Antenna Cable Ant Table Remark Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 57.16 34.89 -5.11 40 50.6 14.06 0.83 125 60 QP 94.99 32.28 -11.22 43.5 43.59 18.3 0.99 - - Peak 133.79 28.04 -15.46 43.5 39.36 18.13 1.15 - - Peak 225.94 24.72 -21.28 46 36.94 16.85 1.4 - - Peak 333.61 27.74 -18.26 46 36.42 19.98 1.71 - - Peak 866.14 34.59 -11.41 46 33.22 28.23 2.71 - - Peak Note: 1. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 2. Emission level (dBμV/m) = 20 log Emission level (μV/m). 3. Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor= Level. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : C3 of C3 TEL : 86-755-8637-9589 Report Issued Date : Dec. 08, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PD200V4 Report Template No.: BU5-FR15CNFC Version 1.2


Document Created: 2017-12-19 04:31:05
Document Modified: 2017-12-19 04:31:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC