CCISE190808701V01

FCC ID: V5PCM204GW

Test Report

Download: PDF
FCCID_4484792

M Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCISE190808701V01 FCC REPORT (WCDMA) Applicant: PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Address of Applicant: Wanchai, Hong Kong Equipment Under Test (EUT) Product Name: Communication Module Model No.: CM20 Trade mark: PAX FCC ID: VSPCM2O04GW FCC CFR Title 47 Part 2 FCC CFR Title 47 Part 22 Subpart H Applicable standards: FCC CFR Title 47 Part 24 Subpart E FCC CFR Title 47 Part 27 Subpart L Date of sample receipt: 23 Aug., 2019 Date of Test: 24 Aug., to 16 Sep., 2019 Date of report issued: 18 Oct., 2019 Test Result: PASS* + In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the preduct in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are refained for 90 days only.

c c I s Report No: CCISE190808701V0O1 2. Version Version No. Date Description 00 17 Sep., 2019 Original 01 18 Oct., 2019 Update page 4, page 26 Tested by: M tlkGe—OU vate: 18 Oct., 2019 Test Engineer Reviewed by: ww¥ M Date: 18 Oct., 2019 Project Engineer Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 30

c c I s Report No: CCISE190808701V01 3. Contents Page 1. COVER PAGE 1 2. VERSION 2 3. CONTENTS 3 4. TEST SUMMARY 4 5. GENERAL INFORMATION 5 5.1 CLIENT INFORMATION :2200 00 0000000 n en en en n n n n n n ns nnnennnennnennnennnennnennne snn enneenneeseeeseeeseeeseeeseeeseeennencernees 5 5.2 GENERAL DESCRIPTION OF E. U.T «225 5.3 TEST MODES ns ecccccncmememees. 7 5.4 DESCRIPTION OF SupPoRt Units 7 5.5 MEASUREMENT UNCERTAINTY. 7 5.6 LABORATORY FACILITY...... 7 5.7 LABORATORY LOCATION 8 5.8 TEST INSTRUMENTS LIST... 8 6. TEST RESULTS 9 6.1 CoONDUCTED QUTPuT PoOWER, ERP AND EIRP .. 6.2 PEAK—TO—AvERAGE POWER RATIO 6.3 OCCUPY BANDWIDTH ..... 6.4 MODULATION CHARACTERISTIC 6.5 OUT OF BAND EMISSION AT ANTENNA TERMINALS 6.6 FIELD STRENGTH OF SPURIOUS RADIATION MEASUREMENT 6.7 FREQUENCY STABILITY V.S. TEMPERATURE MEASUREMENT. 6.8 FREQUENCY STABILITY V.S. VOLTAGE MEASUREMENT ......... 7 TEST SETUP PHOTO 21 8 EUT CONSTRUCTIONAL DETAILS 22 Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 30

CCIS Report No : CCISE190808701V01 4. Test Summary Test Item Section in CFR 47 Result Pass Part 1.1310 RF Exposure (SAR) (Please refer to Part 2.1091 MPE Report) Part 21046 Part 22.913 (a)(5) RF Output Power Pass* Part 24.232 (c) Part 27.50 (d)(4) Part 24.232 (d) Peak—to—Average Power Ratio Pass* Part 27.50(d)(5) Modulation Characteristics Part 2.1047 Pass Part 21049 Part 22.917(b) 99% & —26 dB Occupied Bandwidth Pass* Part 24.238(b) Part 27.53(h) Part 21053 Part 22.917 (a) Out of band emission at antenna terminals Pass* Part 24.238 (a) Part 27.53 (h) Part 22.917 (a) Field strength of spurious radiation Part 24.238 (a) Pass Part 27.53 (h) Part 22.355 Part 24.235 Frequency stability vs. temperature Pass* Part 27.54 Part 2.1055(a)(1)(b) Part 22.355 Part 24.235 Frequency stability vs. voltage Pass* Part 27.54 Part 21055(d)(2) Pass: The EUT complies with the essential requirements in the standard. Pass*: please refer to FCC ID: ZMONLEGG8AMOO, Report No.: FG8O1914—01A. Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 4 of 30

CCIS Report No: CCISE190808701V01 5. General Information 5.1 Client Information Applicant: PAX Technology Limited Address: Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong Manufacturer: PAX Computer Technology (Shenzhen) Co., Ltd. Address: 401—402 No.3 Building, Software Park, Nanshandistrict, Shenzhen, Guangdong, P.R.C. 5.2 General Description of E.U.T. Product Name: Communication Module Model No.: CM20 Operation Frequency range: WCDMA Band V: 826.4MHz—846.6MHz WCDMA Band II: 1852.4 MHz—1907.6 MHz WCDMA Band IV: 1712.4 MHz—1752.6 MHz Modulation type: UMTS: QPSK Antenna type: External Antenna Antenna gain: WCDMA Band V: 0.5 dBi WCDMA Band II: 1.0 dBi WCDMA Band IV: 1.0 dBi Adapter: Model: GLHO901000 Input: AC100—240V, 50/60H2z, 0.5A Output: DC 9.0V, 1.0A Test Sample Condition: The test samples were provided in good working order with no visible defects. Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 5 of 30

c c I s Report No: CCISE190808701V01 Operation Frequency List: WCDMA Band V WCDMA Band 1 Channel Frequency (MHz) Channel Frequency (MHz) 4132 826.40 9262 1852.40 4133 826.60 9263 1852.60 4182 836.40 9399 1879.80 4183 836.60 9400 1880.00 4184 836.80 9401 1880.20 4232 846.40 9537 1907.40 4233 846.60 9538 1907.60 WCDMA Band IV Channel Frequency (MHz) 1312 1712.40 1318 1712.60 1412 1732.40 1413 1732.60 1414 1732.80 1512 1752.40 1513 1752.60 Regards to the operating frequency range over 10 MHz, the Lowest frequency, the middle frequency, and the highest frequency of channel were selected to perform the test, and the selected channel see below: WCDMA Band V WCDMA Band II Channel Frequency(MHz) Channel Frequency(MHz) Lowest 4132 826.40 Lowest 9262 1852.40 Middle 4183 836.60 Middle 9400 1880.00 Highest 4233 846.60 Highest 9538 1907.60 WCDMA Band IV Channel Frequency(MHz) Lowest 1312 1712.40 Middle 1413 1732.60 Highest 1513 1752.60 Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 6 of 30

c c I s Report No: CCISE190808701V01 5.3 Test modes Operating Environment: Temperature: Normal: 15°C ~35°C, Extreme: —30°C ~+50°C Humidity: 20 % ~ 75 % RH Atmospheric Pressure: 1008 mbar Voltage: Nominal: 120Vac, Extreme: Low 102 Vac, High 138 Vac Test mode: RMC mode Keep the EUT communication with simulated station in RMC mode HSDPA Keep the EUT communication with simulated station in HSDPA mode HSUPA Keep the EUT communication with simulated station in HSUPA mode Remark: The EUT has been tested under continuous transmitting mode. Channel Low, Mid and High for each type band with rated data rate were chosen for full testing. The field strength of spurious radiation emission was measured as EUT stand—up position (H mode) and lie down position (E1, E2 mode) for these modes with power adaptor, earphone and Data cable. Just the worst case position (H mode) shown in report. 5.4 Description of Support Units Test Equipment Manufacturer Model No. Serial No. Simulated Station Anritsu MT8820C 6201026545 5.5 Measurement Uncertainty Parameters Expanded Uncertainty Radiated Emission (OkHz ~ 3OMHz) +3.12 dB (k=2) Radiated Emission (3OMHz ~ 1000MHz) +4.32 dB (k=2) Radiated Emission (1GHz ~ 18GHz) +5.38 dB (k=2) Radiated Emission (18GHz ~ 40GHz) +3.36 dB (k=2) 5.6 Laboratory Facility The test facility is recognized, certified, or accredited by the following organizations: ® FCC — Designation No.: CN1211 Shenzhen Zhongjian Nanfang Testing Co., Ltd. has been accredited as a testing laboratory by FCC(Federal Communications Commission). The test firm Registration No. is 727551. ®@ ISED — CAB identifier.: CNOO21 The 3m Semi—anechoic chamber of Shenzhen Zhongjian Nanfang Testing Co., Ltd. has been Registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 10106A—1. © CNAS — Registration No.: CNAS L6048 Shenzhen Zhongjian Nanfang Testing Co., Ltd. is accredited to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration laboratories for the competence of testing. The Registration No. is CNAS L6048. ® A2LA — Registration No.: 4346.01 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. The test scope can be found as below link: https/portal.a2la.org/scopepdf/4346—0 1. pdf Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 7 of 30

CCIS Report No: CCISE190808701V01 5.7 Laboratory Location Shenzhen Zhongjian Nanfang Testing Co., Ltd. Address: No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Tel: +86—755—23118282, Fax: +86—755—23116366 Email: info@ccis—cb.com, Website: http—//www.ccis—cb.com 5.8 Test Instruments list Test Equipment Manufacturer Model No. Serial No. ("(::‘I::(:;) c(:'mD_l;Z_dya;e 3m SAC SAEMC 9m*6m*6m 966 07—22—2017 07—21—2020 BiConiLog Antenna SCHWARZBECK VULB3163 497 03—18—2019 03—17—2020 Biconical Antenna SCHWARZBECK VUBAQ117 359 06—22—2017 06—21—2020 Horn Antenna SCHWARZBECK BBHAY120D 916 03—18—2019 03—17—2020 Horn Antenna SCHWARZBECK BBHA9Y120D 1805 06—22—2017 06—21—2020 Horn Antenna SCHWARZBECK BBHA 9170 BBHAY170582 11—21—2018 11—20—2019 EMI Test Software AUDIX E3 Version: 6.110919b Pre—amplifier HP 8447D 2944409358 03—18—2019 03—17—2020 Pre—amplifier CD PAP—1G18 11804 03—18—2019 03—17—2020 Spectrum analyzer Rohde & Schwarz FSP30 101454 03—18—2019 03—17—2020 Spectrum analyzer Rohde & Schwarz FSP40 100363 11—21—2018 11—20—2019 EMI Test Receiver Rohde & Schwarz ESRPY 101070 03—18—2019 03—17—2020 Spectrum Analyzer Agilent N9020A MY50510123 11—10—2018 11—09—2019 Signal Generator Rohde & Schwarz SMX 835454/016 03—18—2019 03—17—2020 Signal Generator R&S SMR20 1008100050 03—18—2019 03—17—2020 RFE Switch Unit MWRETEST MW200 N/A N/A N/A Test Software MWRETEST MTS8200 Version: 2.0.0.0 Cable ZDECL 2108—NJ—NJ—81 1608458 03—18—2019 03—17—2020 Cable MICRO—COAX MER64G39 K10742—5 03—18—2019 03—17—2020 Cable SUHNER SUCOFLEX100 58193/4PE 03—18—2019 03—17—2020 DC Power Supply XinNuoEr WYK—10020K 1409050110020 10—31—2018 10—30—2019 Temperature Humidity Chamber HengPu HPabs—s00 20140828008 09—24—2018 09—23—2019 ; ; 07—16—2018 07—15—2019 Simulated Station Rohde & Schwarz CMW500 140493 0r—16—2019 07—15—2020 Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 8 of 30

CCIS Report No: CCISE190808701V01 6. Test results 6.1 Conducted Output Power, ERP and EIRP Test Requirement: FCC part 22.913(a)(5), FCC part 24.232(c), FCC part 27.50(d)(4) Test Method: ANSUTIA—603—D 2010 Limit: WCDMA Band V: 7W, WCDMA Band II: 2W, WCDMA Band IV: 1W Test setup: C TCJ ATT System simulator EUT Test Procedure: The transmitter output was connected to a calibrated attenuator, the other end of which was connected to the simulated station. Transmitter output power was read off in dBm. Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Conducted Output Power is Refer to FCC ID: ZMONL668AMOOY, Report Test results: No.: FG8O1914—01A. Only retest ERP and EIRP Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 9 of 30

CCIS Report No: CCISE190808701V01 Measurement Data: Burst Average power (dBm) EUT Mode 4132 4183 4233 826.40 (MHz) 836.60 (MHz) 846.60 (MHz) Subtest 1 22.58 22.52 22.49 UMTS 850 Subtest 2 22.62 22.60 22.54 HSDPA Subtest 3 22.12 22.12 22.04 Subtest 4 22.18 22.12 22.05 Subtest 1 22.31 22.24 22.23 UMTS 850 Subtest 2 22.36 22.38 22.29 DC—HSDPA Subtest 3 21.86 21.85 21.79 Subtest 4 21.88 21.86 21.80 Subtest 1 22.12 22.15 21.90 Subtest 2 21.59 21.37 21.38 UMTS 850 Subtest 3 21.23 20.92 20.96 HSUPA Subtest 4 21.57 21.47 21.52 Subtest 5 22.50 22.20 22.40 UMTS 850 RMC 12.2kbps 23.42 23.59 28.45 Antenna Gain (dBi) 0.5 Max. ERP (dBm) 24.03 ERP Limit (dBm) 38.45 Burst Average power (dBm) EUT Mode 9262 9400 9538 1852.40 (MHz) 1880.00 (MHz) 1907.60 (MHz) Subtest 1 22.87 22.76 22.89 UMTS 1900 Subtest 2 22.88 22.82 22.85 HSDPA Subtest 3 22.40 22.35 22.47 Subtest 4 22.38 22.34 22.45 Subtest 1 22.63 22.52 22.65 UMTS 1900 Subtest 2 22.64 22.57 22.60 DC—HSDPA Subtest 3 22.16 22.10 22.22 Subtest 4 22.14 22.08 22.19 Subtest 1 22.16 22.24 22.18 Subtest 2 21.69 21.70 21.66 UMTS 1900 Subtest 3 21.40 21.31 21.59 HSUPA Subtest 4 21.75 21.66 21.85 Subtest 5 22.80 22.80 22.90 UMTS 1900 RMC 12.2kbps 24.17 24.02 23.78 Antenna Gain (dBi) 1.0 Max. EIRP (dBm) 25.17 EIRP Limit (dBm) 33.00 Note: Burst Average power (dBm) is Refer to FCC ID: ZMONLEESAMOO EIAP (dBm) = Burst Average power(dBm) + Antenna Gain (dB)). EAP (dBm ) = EIRP (dBm) — 2.15 (dB), Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 10 of 30

c c I s Report No: CCISE190808701V01 Burst Average power (dBm) EUT Mode 1312 1412 1513 1712.40 (MHz) 1732.40 (MHz) 1752.60 (MHz) Subtest 1 22.38 22.44 22.41 UMTS 1700 Subtest 2 22.39 22.40 22.35 HSDPA Subtest 3 21.92 21.93 21.88 Subtest 4 21.91 21.92 21.88 Subtest 1 22.12 22.18 22.16 UMTS 1700 Subtest 2 22.12 22.12 22.09 DC—HSDPA Subtest 3 21.65 21.65 21.62 Subtest 4 21.65 21.65 21.62 Subtest 1 21.64 21.84 21.66 Subtest 2 21.02 21.23 21.22 UT'ESU;ZOO Subtest 3 20.93 20.81 20.93 Subtest 4 21.46 21.97 21.21 Subtest 5 22.90 22.30 22.30 UMTS 1700 RMC 12.2bps 23.74 28.63 28.65 Antenna Gain (dBi) 1.0 Max. EIRP (dBm) 24.74 EIRP Limit (dBm) 30.00 Note: Burst Average power (dBm) is Refer to FCC ID: ZMONLEESAMOO EIRP (dBm} = Burst Average power(dBm) + Anterna Gain (dB)). Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 11 of 30

CCIS Report No: CCISE190808701V01 6.2 Peak—to—Average Power Ratio Test Requirement: FCC part 24.232(d), FCC part 27.50(d)(5) Test Method ANSUTIA—603—D 2010 Limit: The peak—to—average ratio (PAR) of the transmission may not exceed 13 ' dB. Test setup: C C System simulator : Splitter 4T EUT C TCJ Spectrum Analyzer Test Procedure: 1 The RF output of the transceiver was connected to a spectrum analyzer through appropriate attenuation. 2 Set the CCDF option in spectrum analyzer, RBW 2 OBW, 3 Set the EUT working in highest power level, measured and recorded the 0.1% as PAPR level. 4 Repeat step 1~3 at other frequency and modulations. Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Refer to FCC ID: ZMONL6G8AMOOY, Report No.: FG8O1914—01A. Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 12 of 30

c c I s Report No: CCISE190808701V01 6.3 Occupy Bandwidth Test Requirement: FCC part 22.917(b), FCC part 24.238(b), FCC Part 27.53(h) Test Method: ANSUTIA—603—D 2010 Test setup: & C System simulator : Splitter 4T EUT C TCJ Spectrum Analyzer Test Procedure: 1. The EUT‘s output RF connector was connected with a short cable to the spectrum analyzer 2. RBW was set to about 1% of emission BW, VBW= 3 times RBW. 3. —26dBe display line was placed on the sereen (or 99% bandwidth), the occupied bandwidth is the delta frequency between the two points where the display line intersects the signal trace. Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Refer to FCC ID: ZMONL668AMOOY, Report No.: FG8O1914—01A. Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 13 of 30

c c I s Report No: CCISE190808701V01 6.4 Modulation Characteristic According to FCC § 2.1047(d), Part 22H & 24E & 27L there is no specific requirement for digital modulation, therefore modulation characteristic is not presented. 6.5 Out of band emission at antenna terminals Test Requirement: FCC part 22.917(a), FCC part 24.238(a), FCC Part 27.53 (h) Test Method: ANSUTIA—603—D 2010 Limit: —13dBm Test setup: & C System simulator : Splitter 4T EUT C TCJ Spectrum Analyzer Test Procedure: 1 The RF output of the transceiver was connected to a spectrum analyzer through appropriate attenuation. 2 The resolution bandwidth of the spectrum analyzer was set at 100 kHz when below 1GHz, 1MHz when above 1 GHz; sufficient scans were taken to show the out of band Emissions if any up to 10th harmonic. 3 For the out of band: Set the RBW=100 kHz, VBW=300 kHz when below 1 GHz, RBW =1 MHz, VBW=3 MHz when above 1 GHz, Start=30MHz, Stop= 10th harmonic. 4 Band Edge Requirements: in the 1 MHz bands immediately outside and adjacent to the frequency block, a resolution bandwidth of at least 1 percent of the emission bandwidth of the fundamental emission of the transmitter may be employed to measure the out of band Emissions. Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Refer to FCC ID: ZMONL668AMOOY, Report No.: FG8O1914—01A. Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 14 of 30

CCIS Report No: CCISE190808701V01 6.6 Field strength of spurious radiation measurement Test Requirement: FCC part 22.917(a), FCC part 24.238(a), FCC part 27.53(h) Test Method: ANSUTIA—603—D 2010 Limit: —13dBm Test setup: Below 1GHz [= Cooe ; i Amtoona | _ ] _ %X monna Tover 1 C| 5t | i I mss [(AAA/AA/J li&:: 24| 1 Ground RetvercePlane sge Generator wet—|amter)— Above 1GHz ) <_| I 4 z> [E A| | | | a estReceri Test Procedure: 1. The EUT was placed on an non—conductive turntable using a non— conductive support. The radiated emission at the fundamental frequency was measured at 3 m with a test antenna and EMI spectrum analyzer. During the tests, the antenna height and the EUT azimuth were varied in order to identify the maximum level of emissions from the EUT. This maximization process was repeated with the EUT positioned in each of its three orthogonal orientations. The frequency range up to tenth harmonic was investigated for each of three fundamental frequency (Jow, middle and high channels). Once spurious emission was identified, the power of the emission was determined using the substitution method. The spurious emissions attenuation was calculated as the difference between radiated power at the fundamental frequency and the spurious emissions frequency. ERP / EIRP = $.G. output (dBm) + Antenna Gain{dB/dBi) — Cable Loss (dB) Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details. Test results: Passed Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 15 of 30

CCIS Report No: CCISE190808701V01 Measurement Data (worst case): WCDMA BAND V 12.2k RMC Lowest channel Spurious Emission 2. Frequency (MHz) —— Limit (dBm) Result Polarization Level (dBm) 1652.80 Vertical —59.12 2479.20 V —51.63 —13.00 Pass 3305.60 V —51.84 1652.80 Horizontal —58.75 2479.20 H —50.71 —13.00 Pass 3305.60 H —51.5 Middle channel Spurious Emission 20. Frequency (MHz) —— Limit (dBm) Result Polarization Level (dBm) 1673.20 Vertical —59.84 2509.80 V —51.48 —13.00 Pass 3346.40 V —51.69 1673.20 Horizontal —58.67 2509.80 H —50.83 —13.00 Pass 3346.40 H —51.34 Highest channel Spurious Emission 2. Frequency (MHz) —— Limit (dBm) Result Polarization Level (dBm) 1693.20 Vertical —59.76 2539.80 V —51.54 —13.00 Pass 3386.40 V —51.73 1693.20 Horizontal —58.69 2539.80 H —50.87 —13.00 Pass 3386.40 H —51.38 Remark: 1. The emission levels of below 1 GHz are very lowerthan the limit and not show in test report. Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 16 of 30

c c I s Report No: CCISE190808701V01 WCDMA Band II 12.2k RMC Lowest channel Spurious Emission Frequency (MHz) —— Limit (dBm) Result Polarization Level (dBm) 3704.80 Vertical —50.13 5557.20 eNCZ V ~44.55 —13.00 Pass 3704.80 Horizontal —49.16 —13.00 Pass 5557.20 H —43.67 Middle channel Spurious Emission Frequency (MHz) —— Limit (dBm) Result Polarization Level (dBm) 3760.00 Vertical —50.16 —13.00 Pass 5640.00 V ~44.87 3760.00 Horizontal —49.23 —13.00 Pass 5640.00 H —43.68 Highest channel Spurious Emission Frequency (MHz) —— Limit (dBm) Result Polarization Level (dBm) 3815.20 Vertical —49.38 —13.00 Pass 5722.80 V —44.89 3815.20 Horizontal —49.37 —13.00 Pass 5722.80 H —43.72 Remark: 1. The emission levels of below 1 GHz are very lowerthan the limit and not show in test report. Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 17 of 30

c c I s Report No: CCISE190808701V01 WCDMA Band IV 12.2k RMC Lowest channel Spurious Emission 20 Frequency (MHz) —— Limit (dBm) Result Polarization Level (dBm) Vertical —48.89 342440 e1c2 —13.00 Pass 5136.60 V —44 Horizontal —47.73 8424.40 —13.00 Pass 5136.60 H —40.35 Middle channel Spurious Emission Frequency (MHz) —— Limit (dBm) Result Polarization Level (dBm) Vertical —48.96 8464.80 —13.00 Pass 5197.20 V —44.24 Horizontal —47.56 3464.80 —13.00 Pass 5197.20 H —40.68 Highest channel Spurious Emission Frequency (MHz) —— Limit (dBm) Result Polarization Level (dBm) Vertical —49.21 8505.20 —13.00 Pass 5257.80 V —44.86 Horizontal —47.58 8505.20 —13.00 Pass 5257.80 H —40.72 Remark: 1. The emission levels of below 1 GHz are very lowerthan the limit and not show in test report. Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 18 of 30

c c I s Report No: CCISE190808701V01 6.7 Frequency stability V.S. Temperature measurement Test Requirement: FCC Part 22.355, FCC Part 24.235, FCC Part 27.54, FCC Part 2.1055(a)(1)(b) Test Method: ANSUTIA—6—3—D 2010 Limit: £2.5 ppm for WCDMA 850 Within authorized band for W1900 and W1700 CUTT D—|_q SS SA Temperature & Humidity Chamber Power Source Test procedure: 1. The equipment under test was connected to an external DC power supply and input rated voltage. 2. RF output was connected to a frequency counter or spectrum analyzer via feed through attenuators. 3. The EUT was placed inside the temperature chamber. 4. Set the spectrum analyzer RBW low enough to obtain the desired frequency resolution and measure EUT 25°C operating frequency as reference frequency. 5. Turn EUT off and set the chamber temperature to —30°C. After the temperature stabilized for approximately 30 minutes recorded the frequency. 6. Repeat step measure with 10°C increased per stage until the highest temperature of +50°C reached Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Refer to FCC ID: ZMONL668AMOOY, Report No.: FG8O1914—01A. Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 19 of 30

c c I s Report No: CCISE190808701V01 6.8 Frequency stability V.S. Voltage measurement Test Requirement: FCC Part 22.355, FCC Part 24.235, FCC Part 27.54, FCC Part 2.1055(d)(2) Test Method: ANSUTIA—603—D 2010 +2.5 ppm for WCDMA 850 Limit: Within authorized band for W1900 and W1700 Test setup: SS I_U Temperature & Humidity Chamber Power Source Test procedure: 1. Set chamber temperature to 25°C. Use a variable DC power source to power the EUT and set the voltage to rated voltage. 2. Set the spectrum analyzer RBW low enough to obtain the desired frequency resolution and recorded the frequency. 3. Reduce the input voltage to specify extreme voltage variation (+/— 15%) and endpoint, record the maximum frequency change. Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Refer to FCC ID: ZMONL6G8AMOO, Report No.: FG8O1914—01A. Shenzhen Zhongfian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 20 of 30

Report No: CCISE190808701V01 Radiated Spurious Emission Below 1GHz Above 1GHz Shenzhen Zhongiian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 21 of 30

c c I s Report No: CCISE190808701V01 8 EUT Constructional Details PE ET ooo T oo YAAA pasnng un PFi sn ooo y sys uce Ns Jnd:JsJuu&sosmocozmobzoe n Ne eSA CAL h s 9N 2 |Il|ll| * m|Q_ UOZ 06 08 0 09 OS or 0t o2 0: 00| 06 o8 oz o9 os or o6 0Z 01 Shenzhen Zhongiian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 22 of 30

c c I s Report No: CCISE190808701V01 001 o1 oz C C 8 ut 8 [3 o5 09 OL us 06 8 8 8 E bouid CC Uss—Host iJ 2& oi ocar) |r||°- Shenzhen Zhongiian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 23 of 30

c c I s Report No: CCISE190808701V01 Oz O€ O# OS 09 0Z | omax Model : CM20 .l Oc uad) LoBbEsr MX Computer Tchnology (Shenthon) o.lad. Leo e o cssc in EW OO C OS s sA d Shenzhen Zhongiian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 24 of 30

c c I s Report No: CCISE190808701V01 06 O82 Oc o9 —Os=oOovr oc ot o. a.a. a eniucmnmnra hoR d6 08 Oc o9 oOs or os otu &\ Shenzhen Zhongiian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 25 of 30

CCGIS Report No: CCISE190808701V01 e d6 OS oLr—og oOs ov ost at a. Shenzhen Zhongiian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 26 of 30

c c I s Report No: CCISE190808701V01 C ied Eonse o6 00Z o1 oz uko ol in OR n3 t P ~0 O i ccA ov os o9 oz uw o6 00L or oz og or os o9 oz os os O w ol OZ O€ Or OS 05 Oz 08 06 pQJ 0% D stt O c css sc Shenzhen Zhongiian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 27 of 30

Report No: CCISE190808701V01 wl uen WOesc 0d sn d " oL Oc O€ Oor os oS oz e CS " ol Oc o€ Oor os os oz Eooo ce Shenzhen Zhongiian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 28 of 30

c c I s Report No: CCISE190808701V01 j =d P [=] eS O e c ho o m o L «J & l e e Oe : PUAES PA e """iith C (PEHTD ©000 nllQ $Ob Oc aicaic sns ac) 08 O 09 OS Or O€f 02 04 Shenzhen Zhongiian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 29 of 30

CCGIS Report No: CCISE190808701V01 Lo : asecouon . 39 $1940—0 ECE 08 Oz 09 OS Oor o€f OZ 04 ------ End of report—————— Shenzhen Zhongiian Nanfang Testing Co., Ltd. Project No.: CCISE1908087 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 30 of 30


Document Created: 2019-10-18 15:59:09
Document Modified: 2019-10-18 15:59:09
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC