User manual

FCC ID: V5PA60

Users Manual

Download: PDF
FCCID_3890607

A60 Smart Mini Payment Terminal 1. Contents Checklist Please check the components after unpacking. If any one of them is missing, or if there is a page missing from the product manual,ect.,please contact the dealer. Name Qty. Smart Mini Payment Terminal 1 AC Power Adapter 1 Battery 1 Cable 1 Product Manual 1 2. Installation USB port: Connect USB device or PC. SAM/SIM card: ○1 Open the battery cover on the Top of the terminal; ○2 Take out the battery; ○3 Insert SAM/SIM card into the corresponding SAM/SIM card slot. Micro SD card: ○ 1 Open the battery cover on the Top of the terminal; ○ 2 Take out battery; ○ 3 Insert Micro SD card into the corresponding Micro SD card slot. 3. Instruction 1） Power ON/OFF Power on: press and hold the Power button for five seconds until LCD backlight light, the terminal turns on successfully. Power off: press and hold the Power button for three seconds until the shutdown menu appears, tap Shutdown > Click Shutdown, and then “Shutting…” appears, the terminal is being turned off. 2） IC card & Magnetic Stripe Card Put IC card chip side upward and the magnetic stripe face down, then push-in Card slot of bottom. Please push -out the card with a steady speed. 3) Battery charging User can charge the battery with power adapter, and the charging status will be displayed on the LCD. 6）Swiping contactless card Place a contactless card close to the sensor area of swiping which is at the top of the terminal. 4. Installation and Usage Tips 1）Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty environment. 2）Forbid non-professional to repair the terminal. 3）Before insert the card, please check internal and around of IC card slot. when you found some suspicious objects , must report to related administrator. 5. Lithium Ion Battery Usage Tips WARNING: 1）Don't use the battery in sunlight or smoke, dust environment. 2）Prohibited to strike, squeeze and tread on battery or throw it into the liquid and fire. 3）If battery is impressive, deformed, damaged or exothermic seriously, please stop using

immmediately andreplace it 4 1fthe continious working time is only balf of new one, the baterylie may be end. Plese replaceit 5> Must use the specified batry model and chargat,oterise therewillbe explosion 6> Charging ie can not eresed 24 hous,Ifthe batley is outof powar, please recharge in ime Avoid darmaging the batley in overchargeand overdischarge 7> fhe nonuse fr long imlease rechargethe battery per 6 onths to avoidshortening ts ife 8> Suagestto replaceit when the battry have been used for2 years 9> Be suretofolowthe instructionsto Gposethe wasted battries Tcon shows ==. Donot trow avay,needprofessiona eeycling Class IfEqpipment fl Forindoor use only @ Energy Eficincy Marking AC valage DC vaitage TheMADIS plugis used as t dicomected device FCC Regutations: This device comples with part 15 ofthe CC Rules, Operation is supject to the folowing wo conditons: (1) This device may not cause harmful interference, and (2)tis device must accent any Inteference recelved,Including interference that may cause undesired aperation This device has been tested and found to comply with the Imts for a Class 8 digtal device, pursuant to Part 15 of the FCC Rules, These Iits are designed to provide reasonable protection against hamful Interference in a residential instaaion, This equpment generates, uses and can radlated radlo frequency energy and, I notinstaled and used in accordance with the instuctions, may cause harmfulinterference to reco communications. However, there is no guarartee that infeference will not occur in a partcular instalation If ths equipment does cause hamfl infeference to radlo or televison reception, which can be deternined by turning the equipment off and on, the user is encouraged to by to conect the interference by one or more of the folowing measures —Reotent or relocate the recelving antenna ~Ircrease the separaton between the equipment and receiver —Comnectthe equipment nto an outlet on a eircut iferent rom that to which the receiver

is connected. -Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. FCC RF Exposure Information (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device is set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage near the body. Although the SAR is determined at the highest certified power level, the actual SAR level of the while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: V5PA60 For this device, the highest reported SAR value for usage near the body is1.39W/kg. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. ISED Notice This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présentappareilestconforme aux CNR Innovation, Sciences et Développementéconomique Canada applicables aux appareils radio exempts de licence.

L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'en IC: 11689A-A60 ISED Radiation Exposure Statement This EUT is in compliance with SAR for general population/uncontrolled exposure limits in ISED RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Cetappareilestconforme aux limitesd'exposition DAS incontrôlée pour la populationgénérale de la norme CNR-102 science de l’innovation et le développementéconomique Canadaet a ététestéenconformité avecles méthodes de mesure et procéduresspécifiéesdans IEEE 1528 et IEC 62209.Cetappareil et saousesantennes ne doiventpas êtreco-localisésoufonctionnerenconjonction avec tout autreantenneoutransmetteur. PAX TECHNOLOGY LIMITED To know more product details, please visit http://www.pax.com.cn


Document Created: 2019-03-23 07:39:56
Document Modified: 2019-03-23 07:39:56
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC