User manual

FCC ID: V5P-D2204GMA

Users Manual

Download: PDF
FCCID_4100906

PAX D220 Mobile Payment Terminal 1. Contents Checklist Mobile Payment Terminal 1 AC Power Adapter 1 Micro USB cable 1 Product Manual 1 2. Installation Micro SAM/SIM Card： a) Remove the bottom cover. b) Insert the Micro SAM/SIM card to the corresponding card slot. 3. Instructions 1) Power ON/OFF Power on: Plug in power adapter, Press Power ON/OFF button for 5 seconds, and then PAX LOGO will display on LCD. Power off: Press Power ON/OFF button for 3 seconds until Shutting down... can be seen. Forced shutdown：Press Power ON/OFF button more than 6 seconds，until the screen no display, that is forced to shut down. 2) IC Card Put IC card chip side upward, push-in IC card slot and to bottom. 3) Contactless Card The card read area is above the LCD, Put the card above the LCD. 4) Battery Charge display Connecting USB port with external adapter can charger battery. And there are charging display. 5) Battery Charge style Please use the original adapter instead of pc usb port if you need to charge. 4. Installation and Usage Tips 1）Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty environment. 2）Forbid non-professional to repair the terminal. 3）Before insert the card, please check internal and around of IC card slot. when you found some suspicious objects , must report to related administrator. 5. Lithium Ion Battery Usage Tips WARNING: 1）Don't use the battery in sunlight or smoke, dust environment. 2）Prohibited to strike, squeeze and tread on battery or throw it into the liquid and fire. 3）If battery is impressive, deformed, damaged or exothermic seriously, please stop using immediately and replace it! 4）If the continuous working time is only half of new one, the battery life may be end. Please

replace t 5) Mus use th specified batry modeland charger, othernisethere will beexplosion 6) Cherging lime can not erceed 24 hous,Ifthe battery is ouof pow,pleaserecharge in ime Avoid damaging the battery in overchargeand overdisharge 7) 1fbe nonuse for long ime, lease rechargethe batley pr 6 months to aveid shortening ts ife 8) Suggest o replaceit when the battry have been usefor 2 years 9) Be sire to filowhe instructionsto Gpose the wasted batlies Tcon shows ==. Do not trow avny, need profesiona eeycing O Class IfEqpipment G Forindoor use oly @ Energy Eficincy Marking AC valage DCvaitage The filltet of e EU declntionof confornity is availableatthe folowing internet addesss hitp Porirepacscom enProductCaspx PMic 2001200000117 FCC Regulations: This device comples with part 15 ofthe FCC Rules. Operation is subjectto the folowing wo condions: (1) This device may not cause harmfulinfeference, and (2) tis device must accept any Inteference received,Including Infeference that may cause undesired operation This device has been tested and found to comply wth the lims for a Class 8 digtal device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonatle protection against hamful Interference in a residental instalation, This equipment generates, uses and can radlated radio frequency energy and, i not instaled and used in accordance with the instructions, may cause harmful interference to rado communications. However, there is no quarartes that interference will not occur in a particular instalation If ts equipment does cause harmfil intrference to radlo or television reception, which can be deternined by turming the equlpment off and on, the user is encouraged to by to conect the Inteference by one or more or the folowing messures

-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. FCC RF Exposure Information (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device is set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage near the body. Although the SAR is determined at the highest certified power level, the actual SAR level of the while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: V5P-D2204GMA For this device, the highest reported SAR value for usage near the body is 0.63 W/kg. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. ISED Notice This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présentappareilestconforme aux CNR Innovation, Sciences et Développementéconomique Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'en IC: 11689A-D2204GMA ISED Radiation Exposure Statement This EUT is in compliance with SAR for general population/uncontrolled exposure limits in ISED RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Cetappareilestconforme aux limitesd'exposition DAS incontrôlée pour la populationgénérale de la norme CNR-102 science de l’innovation et le développementéconomique Canadaet a ététesté en conformité avecles méthodes de mesure et procéduresspécifiéesdans IEEE 1528 et IEC 62209.Cetappareil et saousesantennes ne doiventpas êtreco-localisésoufonctionner en conjonction avec tout autreantenneoutransmetteur. PAX TECHNOLOGY LIMITED reserves the right to change product technology specifications without notifying. PAX TECHNOLOGY LIMITED Manufacturer: PAX Computer Technology (Shenzhen) Co.,Ltd. Address:4/F, No.3 Building, Software Park, Second Central Science-Tech Road, High-Tech Industrial Park, Shenzhen, Guangdong, P.R.C. Tel: 0755-86169630 Fax: 0755-86169634 Website: http://www.pax.com.cn Responsible Party: PAX Technology, Inc.

8880 Freedom Crossing Trail, Building 400, 3rd Floor Suite 300, Jacksonville, Florida, 32256 Nikolai Francis T: (904) 217-6387


Document Created: 2019-06-11 16:42:28
Document Modified: 2019-06-11 16:42:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC