Test report

FCC ID: V5P-D2204GMA

Test Report

Download: PDF
FCCID_4100904

FCC RF Test Report Report No. : FR882223D FCC RF Test Report APPLICANT : PAX Technology Limited EQUIPMENT : Wireless POS Terminal BRAND NAME : PAX MODEL NAME : PAX D220 MARKETING NAME : PAX D220 FCC ID : V5P-D2204GMA STANDARD : FCC Part 15 Subpart C §15.225 CLASSIFICATION : (DXX) Low Power Communication Device Transmitter The product was received on Aug. 22, 2018 and testing was completed on Oct. 11, 2018. We, Sporton International (Shenzhen) Inc., would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International (Shenzhen) Inc., the test report shall not be reproduced except in full. Approved by: Eric Shih / Manager Sporton International (Shenzhen) Inc. 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen City, Guangdong Province 518055, China Sporton International (Shenzhen) Inc. Page Number : 1 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D TABLE OF CONTENTS TABLE OF CONTENTS ...............................................................................................................................................2 REVISION HISTORY....................................................................................................................................................3 SUMMARY OF THE TEST RESULT ...........................................................................................................................4 1. GENERAL DESCRIPTION ......................................................................................................................................5 1.1 Applicant......................................................................................................................................................................... 5 1.2 Manufacturer .................................................................................................................................................................. 5 1.3 Product Feature of Equipment Under Test ..................................................................................................................... 5 1.4 Product Specification of Equipment Under Test ............................................................................................................. 6 1.5 Modification of EUT ........................................................................................................................................................ 6 1.6 Testing Location ............................................................................................................................................................. 7 1.7 Applicable Standards...................................................................................................................................................... 7 2. TEST CONFIGURATION OF EQUIPMENT UNDER TEST ....................................................................................8 2.1 Descriptions of Test Mode .............................................................................................................................................. 8 2.2 Connection Diagram of Test System .............................................................................................................................. 9 2.3 Table for Supporting Units .............................................................................................................................................. 9 2.4 EUT Operation Test Setup ............................................................................................................................................. 9 3. TEST RESULTS .....................................................................................................................................................10 3.1 AC Power Line Conducted Emissions Measurement ................................................................................................... 10 3.2 20dB and 99% OBW Spectrum Bandwidth Measurement............................................................................................ 12 3.3 Frequency Stability Measurement ................................................................................................................................ 13 3.4 Field Strength of Fundamental Emissions and Mask Measurement............................................................................. 14 3.5 Radiated Emissions Measurement ............................................................................................................................... 16 3.6 Antenna Requirements ................................................................................................................................................. 19 4. LIST OF MEASURING EQUIPMENT ....................................................................................................................20 5. UNCERTAINTY OF EVALUATION .......................................................................................................................21 APPENDIX A. TEST RESULTS OF CONDUCTED EMISSION TEST APPENDIX B. TEST RESULTS OF CONDUCTED TEST ITEMS B1. Test Result of 20dB Spectrum Bandwidth B2. Test Result of Frequency Stability APPENDIX C. TEST RESULTS OF RADIATED TEST ITEMS C1. Test Result of Field Strength of Fundamental Emissions C2. Results of Radiated Emissions (9 kHz~30MHz) C3. Results of Radiated Emissions (30MHz~1GHz) APPEDNIX D. SETUP PHOTOGRAPHS Sporton International (Shenzhen) Inc. Page Number : 2 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FR882223D Rev. 01 Initial issue of report Dec. 06, 2018 Sporton International (Shenzhen) Inc. Page Number : 3 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D SUMMARY OF THE TEST RESULT Report FCC Rule Description of Test Result Remark Section Under limit AC Power Line Conducted 3.1 15.207 Complies 7.23 dB at Emissions 11.560MHz 15.215(c) 20dB Spectrum Bandwidth Complies - 3.2 - 99% OBW Spectrum Bandwidth Complies - 3.3 15.225(e) Frequency Stability Complies - Max level Field Strength of Fundamental 3.4 15.225(a)(b)(c) Complies 76.20 dBμV/m at Emissions 13.560 MHz Under limit 3.08 dB at 3.5 15.225(d) & 15.209 Radiated Spurious Emissions Complies 40.670MHz for Quasi-Peak 3.6 15.203 Antenna Requirements Complies - Sporton International (Shenzhen) Inc. Page Number : 4 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D 1. General Description 1.1 Applicant PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong 1.2 Manufacturer PAX Computer Technology (Shenzhen) Co., Ltd. 4/F, No.3 Building, Software Park, Second Central Science-Tech Road, High-Tech industrial Park, Shenzhen, Guangdong, P.R.C. 1.3 Product Feature of Equipment Under Test Product Feature Equipment Wireless POS Terminal Brand Name PAX Model Name PAX D220 Marketing Name PAX D220 FCC ID V5P-D2204GMA LTE/NFC EUT supports Radios application WLAN 2.4GHz 802.11b/g/n HT20 Bluetooth BR/EDR/LE EUT Stage Identical Prototype Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. Sporton International (Shenzhen) Inc. Page Number : 5 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D 1.4 Product Specification of Equipment Under Test Standards-related Product Specification Tx/Rx Frequency Range 13.553 ~ 13.567MHz Channel Number 1 20dBW 2.46 KHz 99%OBW 2.09 KHz Antenna Type Loop Antenna Type of Modulation ASK Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. 1.5 Modification of EUT No modifications are made to the EUT during all test items. Sporton International (Shenzhen) Inc. Page Number : 6 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D 1.6 Testing Location Sporton International (Shenzhen) Inc. is accredited to ISO 17025 by National Voluntary Laboratory Accreditation Program (NVLAP code: 600156-0). Test Site Sporton International (Shenzhen) Inc. 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen City, Guangdong Province 518055, China Test Site Location TEL: +86-755-8637-9589 FAX: +86-755-8637-9595 Sporton Site No. FCC FCC Test Firm Test Site No. designation No. Registration No. TH01-SZ CO01-SZ Test Engineer Sam Zheng Xu Zhang CN5018 337463 Temperature 24~26℃ 22~25℃ Relative Humidity 50~53% 50~55% Test Site Sporton International (Shenzhen) Inc. No. 3 Bldg the third floor of south, Shahe River west, Fengzeyuan Warehouse, Nanshan District, Shenzhen City, Guangdong Province 518055, Test Site Location China TEL: +86-755- 3320-2398 Sporton Site No. FCC designation No. FCC Test Firm Registration No. Test Site No. 03CH04-SZ Test Engineer Xiaoshi Tan CN5019 577730 Temperature 24~25℃ Relative Humidity 48~49% 1.7 Applicable Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  FCC Part 15 Subpart C §15.225  ANSI C63.10-2013 Sporton International (Shenzhen) Inc. Page Number : 7 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D 2. Test Configuration of Equipment Under Test 2.1 Descriptions of Test Mode Investigation has been done on all the possible configurations. The following table is a list of the test modes shown in this test report. Test Items AC Power Line Conducted Emissions Field Strength of Fundamental Emissions 20dB Spectrum Bandwidth Frequency Stability Radiated Emissions 9kHz~30MHz Radiated Emissions 30MHz~1GHz The EUT pre-scanned in four NFC type, A, B, F, V. The worst type (type B) was recorded in this report. Pre-scanned tests, X, Y, Z in three orthogonal panels to determine the final configuration (Z plane as worst plane) from all possible combinations. Test Cases AC Conducted Mode 1 : LTE Cat M1 Band 2 Idle + USB Cable (Charging from Adapter 1) + NFC Tx Emission Remark: For Radiated Test Cases, The tests were performed with Adapter 1 and USB Cable. Sporton International (Shenzhen) Inc. Page Number : 8 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D 2.2 Connection Diagram of Test System 2.3 Table for Supporting Units Item Equipment Trade Name Model Name FCC ID Data Cable Power Cord 1. System Simulator Anritsu MT8820C N/A N/A Unshielded, 1.8 m 2. NFC Card N/A N/A N/A N/A N/A 2.4 EUT Operation Test Setup The EUT was programmed to be in continuously transmitting mode. The ancillary equipment, NFC card, is used to make the EUT (NFC) continuously transmit at 13.56MHz and is placed around 3 cm gap to the EUT. Sporton International (Shenzhen) Inc. Page Number : 9 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D 3. Test Results 3.1 AC Power Line Conducted Emissions Measurement 3.1.1 Limit of AC Conducted Emission For equipment that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits in the following table. Frequency of Emission Conducted Limit (dBμV) (MHz) Quasi-Peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 *Decreases with the logarithm of the frequency. 3.1.2 Measuring Instruments See list of measuring instruments of this test report. 3.1.3 Test Procedures 1. The EUT was placed 0.4 meter from the conducting wall of the shielding room, and it was kept at least 80 centimeters from any other grounded conducting surface. 2. Connect EUT to the power mains through a line impedance stabilization network (LISN). 3. All the support units are connecting to the other LISN. 4. The LISN provides 50 ohm coupling impedance for the measuring instrument. 5. The FCC states that a 50 ohm, 50 microhenry LISN should be used. 6. Both sides of AC line were checked for maximum conducted interference. 7. The frequency range from 150 kHz to 30 MHz was searched. 8. Set the test-receiver system to Peak Detect Function and specified bandwidth (IF Bandwidth = 9kHz) with Maximum Hold Mode. Then measurement is also conducted by Average Detector and Quasi-Peak Detector Function respectively. Sporton International (Shenzhen) Inc. Page Number : 10 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D 3.1.4 Test setup 3.1.5 Test Result of AC Conducted Emission Please refer to Appendix A. Sporton International (Shenzhen) Inc. Page Number : 11 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D 3.2 20dB and 99% OBW Spectrum Bandwidth Measurement 3.2.1 Limit Intentional radiators must be designed to ensure that the 20dB and 99% emission bandwidth in the specific band 13.553~13.567MHz. 3.2.2 Measuring Instruments See list of measuring instruments of this test report. 3.2.3 Test Procedures 1. The spectrum analyzer connected via a receive antenna placed near the EUT in peak Max hold mode. 2. The resolution bandwidth of 1 kHz and the video bandwidth of 3 kHz were used. 3. Measured the spectrum width with power higher than 20dB below carrier. 4. Measured the 99% OBW. 3.2.4 Test Setup 3.2.5 Test Result of Conducted Test Items Please refer to Appendix B. Sporton International (Shenzhen) Inc. Page Number : 12 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D 3.3 Frequency Stability Measurement 3.3.1 Limit The frequency tolerance of the carrier signal shall be maintained within +/- 0.01% (100ppm) of the operating frequency over a temperature variation of -20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. 3.3.2 Measuring Instruments See list of measuring instruments of this test report. 3.3.3 Test Procedures 1. The spectrum analyzer connected via a receive antenna placed near the EUT. 2. EUT have transmitted signal and fixed channelize. 3. Set the spectrum analyzer span to view the entire emissions bandwidth. 4. Set RBW = 1 kHz, VBW = 3 kHz with peak detector and maxhold settings. 6 5. The fc is declaring of channel frequency. Then the frequency error formula is (fc-f)/fc × 10 ppm and the limit is less than ±100ppm. 6. Extreme temperature rule is -20°C~50°C. 3.3.4 Test Setup 3.3.5 Test Result of Conducted Test Items Please refer to Appendix B. Sporton International (Shenzhen) Inc. Page Number : 13 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D 3.4 Field Strength of Fundamental Emissions and Mask Measurement 3.4.1 Limit Rules and specifications FCC CFR 47 Part 15 section 15.225 Description Compliance with the spectrum mask is tested with RBW set to 9kHz. Field Strength Field Strength Field Strength Field Strength Freq. of Emission (MHz) (μV/m) at 30m (dBμV/m) at 30m (dBμV/m) at 10m (dBμV/m) at 3m 1.705~13.110 30 29.5 48.58 69.5 13.110~13.410 106 40.5 59.58 80.5 13.410~13.553 334 50.5 69.58 90.5 13.553~13.567 15848 84.0 103.08 124.0 13.567~13.710 334 50.5 69.58 90.5 13.710~14.010 106 40.5 59.58 80.5 14.010~30.000 30 29.5 48.58 69.5 3.4.2 Measuring Instruments See list of measuring instruments of this test report. Sporton International (Shenzhen) Inc. Page Number : 14 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D 3.4.3 Test Procedures 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the loop receiving antenna mounted antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the receiving antenna was fixed at one meter above ground to find the maximum emissions field strength. 4. For Fundamental emissions, use the receiver to measure QP reading. 5. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 6. Compliance with the spectrum mask is tested with RBW set to 9kHz. Note: Emission level (dBμV/m) = 20 log Emission level (μV/m). 3.4.4 Test Setup For radiated emissions below 30MHz 3.4.5 Test Result of Field Strength of Fundamental Emissions and Mask Please refer to Appendix C. Sporton International (Shenzhen) Inc. Page Number : 15 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D 3.5 Radiated Emissions Measurement 3.5.1 Limit The field strength of any emissions which appear outside of 13.110 ~14.010MHz band shall not exceed the general radiated emissions limits. Frequencies Field Strength Measurement Distance (MHz) (μV/m) (meters) 0.009~0.490 2400/F(kHz) 300 0.490~1.705 24000/F(kHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 3.5.2 Measuring Instruments See list of measuring instruments of this test report. 3.5.3 Measuring Instrument Setting The following table is the setting of receiver. Receiver Parameter Setting Attenuation Auto Frequency Range: 9kHz~150kHz RBW 200Hz for QP Frequency Range: 150kHz~30MHz RBW 9kHz for QP Frequency Range: 30MHz~1000MHz RBW 120kHz for Peak Note: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90 kHz, 110-490 kHz. Radiated emission limits in these two bands are based on measurements employing an average detector. Sporton International (Shenzhen) Inc. Page Number : 16 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D 3.5.4 Test Procedures 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 6. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 7. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the recorded data should be QP measured by receiver. Antenna Requirements Sporton International (Shenzhen) Inc. Page Number : 17 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D 3.5.5 Test Setup For radiated emissions below 30MHz For radiated emissions above 30MHz 3.5.6 Test Result of Radiated Emissions Measurement Please refer to Appendix C. Sporton International (Shenzhen) Inc. Page Number : 18 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D 3.6 Antenna Requirements 3.6.1 Standard Applicable Except for special regulations, the Low-power Radio-frequency Devices must not be equipped with any jacket for installing an antenna with extension cable. An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that the user can replace a broken antenna, but the use of a standard antenna jack or electrical connector is prohibited. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the rule. 3.6.2 Antenna Anti-Replacement Construction An embedded-in antenna design is used. Sporton International (Shenzhen) Inc. Page Number : 19 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D 4. List of Measuring Equipment Calibration Instrument Manufacturer Model No. Serial No. Characteristics Test Date Due Date Remark Date Spectrum Conducted R&S FSV40 101078 9kHz~40GHz Apr. 19, 2018 Oct. 09, 2018 Apr. 18, 2019 Analyzer (TH01-SZ) Ten Billion H2014081 Conducted Thermal Chamber Hongzhangrou LP-150U -40~+150°C Dec. 26, 2017 Oct. 09, 2018 Dec. 25, 2018 803 (TH01-SZ) p AnritsuGPS-3 Conducted DC Power Supply GWINSTEK EM882636 Max 30V Apr. 19, 2018 Oct. 09, 2018 Apr. 18, 2019 030D (TH01-SZ) EMI Test Sep. 23, 2018~ Radiation R&S ESR7 101404 9kHz~7GHz Apr. 19, 2018 Apr. 18, 2019 Receiver Oct. 11, 2018 (03CH04-SZ) Sep. 23, 2018~ Radiation Loop Antenna R&S HFH2-Z2 100354 9kHz~30MHz May 14, 2018 May 13, 2019 Oct. 11, 2018 (03CH04-SZ) Sep. 23, 2018~ Radiation Bilog Antenna TeseQ CBL6111D 41909 30MHz~1GHz Aug. 28, 2018 Aug. 27, 2019 Oct. 11, 2018 (03CH04-SZ) 0.01Hz Sep. 23, 2018~ Radiation Amplifier Burgeon BPA-530 102211 Oct. 19, 2017 Oct. 18, 2018 ~3000MHz Oct. 11, 2018 (03CH04-SZ) 61601000 Sep. 23, 2018~ Radiation AC Power Source Chroma 61601 N/A NCR NCR 1985 Oct. 11, 2018 (03CH04-SZ) Sep. 23, 2018~ Radiation Turn Table EM EM1000 N/A 0~360 degree NCR NCR Oct. 11, 2018 (03CH04-SZ) Sep. 23, 2018~ Radiation Antenna Mast EM EM1000 N/A 1 m~4 m NCR NCR Oct. 11, 2018 (03CH04-SZ) Oct. 10, 2018~ Conduction EMI Receiver R&S ESR7 101630 9kHz~7GHz; Dec. 26, 2017 Dec. 25, 2018 Oct. 11, 2018 (CO01-SZ) Oct. 10, 2018~ Conduction AC LISN EMCO 3816/2SH 00103912 9kHz~30MHz Dec. 26, 2017 Dec. 25, 2018 Oct. 11, 2018 (CO01-SZ) AC LISN Oct. 10, 2018~ Conduction (for auxiliary MessTec 3816/2SH 00103892 9kHz~30MHz Nov. 01, 2017 Oct. 31, 2018 Oct. 11, 2018 (CO01-SZ) equipment) 61602000 Oct. 10, 2018~ Conduction AC Power Source Chroma 61602 100Vac~250Vac Jul. 18, 2018 Jul. 17, 2019 0891 Oct. 11, 2018 (CO01-SZ) NCR: No Calibration Required Sporton International (Shenzhen) Inc. Page Number : 20 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D 5. Uncertainty of Evaluation Uncertainty of Conducted Emission Measurement (150 kHz ~ 30 MHz) Measuring Uncertainty for a Level of Confidence 2.6dB of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (30 MHz ~ 1000 MHz) Measuring Uncertainty for a Level of Confidence 5.1dB of 95% (U = 2Uc(y)) Sporton International (Shenzhen) Inc. Page Number : 21 of 21 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D Appendix A. Test Results of Conducted Emission Test Temperature : 22~25℃ Test Engineer : Xu Zhang Relative Humidity : 50~55% Test Voltage : 120Vac / 60Hz Phase : Line Sporton International (Shenzhen) Inc. Page Number : A1 of A2 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D Temperature : 22~25℃ Test Engineer : Xu Zhang Relative Humidity : 50~55% Test Voltage : 120Vac / 60Hz Phase : Neutral Sporton International (Shenzhen) Inc. Page Number : A2 of A2 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D Appendix B. Test Results of Conducted Test Items B1. Test Result of 20dB Spectrum Bandwidth Test mode NFC Tx Test Frequency (MHz) 13.56 20dB Bandwidth (kHz) 2.46 99% OccupiedBW(kHz) 2.09 fL＞13.553 13.558831 Test Result Frequency range (MHz) fH＜13.567 13.561289 Complies Sporton International (Shenzhen) Inc. Page Number : B1 of B2 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D B2. Test Result of Frequency Stability Voltage vs. Frequency Stability Temperature vs. Frequency Stability Measurement Measurement Voltage (Vdc) Temperature (℃) Frequency (MHz) Frequency (MHz) 3.6 13.560055 -20 13.560070 3.8 13.560060 -10 13.560065 4.25 13.560060 0 13.560065 10 13.560060 20 13.560055 30 13.560070 40 13.560070 50 13.560070 Max.Deviation (MHz) 0.000060 Max.Deviation (MHz) 0.000070 Max.Deviation (ppm) 4.4248 Max.Deviation (ppm) 5.1622 Limit FS < ±100 ppm Limit FS < ±100 ppm Test Result PASS Test Result PASS Sporton International (Shenzhen) Inc. Page Number : B2 of B2 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D Appendix C. Test Results of Radiated Test Items C1. Test Result of Field Strength of Fundamental Emissions Test Mode : NFC Tx Test Frequency (MHz) 13.56 Sporton International (Shenzhen) Inc. Page Number : C1 of C3 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D C2. Results of Radiated Spurious Emissions (9 kHz~30MHz) Test Mode : NFC Tx Polarization : Horizontal Frequency Level Over Limit Read Antenna Cable Ant Table Remark Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 0.01022 52.81 -74.6 127.41 31.75 21 0.06 - - Average 0.06576 54.76 -56.49 111.25 34.19 20.5 0.07 - - Average 0.09096 46.66 -61.77 108.43 25.89 20.7 0.07 - - QP 0.14145 41.61 -62.98 104.59 20.93 20.6 0.08 - - Average 0.51445 42.17 -31.21 73.38 21.66 20.41 0.1 - - QP 2.078 37.43 -32.57 70 16.77 20.55 0.11 - - QP 10.968 34.95 -35.05 70 14.23 20.3 0.42 - - QP 22.174 34.4 -35.6 70 14.55 19.24 0.61 - - QP 25.495 35.32 -34.68 70 14.97 19.65 0.7 - - QP Test Mode : NFC Tx Polarization : Vertical Frequency Level Over Limit Read Antenna Cable Ant Table Remark Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 0.01441 51.42 -73.01 124.43 30.36 21 0.06 - - Average 0.06609 47.29 -63.91 111.2 26.72 20.5 0.07 - - Average 0.09222 38.15 -70.16 108.31 17.38 20.7 0.07 - - QP 0.1284 39.28 -66.15 105.43 18.6 20.6 0.08 - - Average 0.49965 41.26 -32.37 73.63 20.76 20.4 0.1 - - QP 2.282 36.65 -33.35 70 16.03 20.54 0.08 - - QP 9.128 34.73 -35.27 70 14.02 20.39 0.32 - - QP 18.601 33.97 -36.03 70 13.93 19.52 0.52 - - QP 27.725 36.06 -33.94 70 15.91 19.43 0.72 - - QP Note: 1. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 2. Distance extrapolation factor = 40 log (specific distance / test distance) (dB); 3. Limit line = specific limits (dBμV) + distance extrapolation factor. Sporton International (Shenzhen) Inc. Page Number : C2 of C3 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0

FCC RF Test Report Report No. : FR882223D C3. Results of Radiated Spurious Emissions (30MHz~1GHz) Test Mode : NFC Tx Polarization : Horizontal Frequency Level Over Limit Read Antenna Cable Preamp Ant Table Remark Limit Line Level Factor Loss Factor Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( dB ) ( cm ) ( deg ) 67.83 25.73 -14.27 40 44.37 12.44 0.78 31.86 - - Peak 94.99 37.35 -6.15 43.5 52.62 15.45 1.03 31.75 100 75 Peak 122.15 30.37 -13.13 43.5 43.46 17.41 1.15 31.65 - - Peak 207.51 25.57 -17.93 43.5 40.07 15.18 1.63 31.31 - - Peak 787.57 31.81 -14.19 46 31.58 28.27 3.13 31.17 - - Peak 910.76 33.4 -12.6 46 32.02 29.17 3.41 31.2 - - Peak Test Mode : NFC Tx Polarization : Vertical Frequency Level Over Limit Read Antenna Cable Preamp Ant Table Remark Limit Line Level Factor Loss Factor Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( dB ) ( cm ) ( deg ) 30 36.29 -3.71 40 43.21 24.8 0.25 31.97 100 73 QP 40.67 36.92 -3.08 40 48.91 19.56 0.42 31.97 100 95 QP 67.83 35.74 -4.26 40 54.38 12.44 0.78 31.86 - - Peak 101.78 34.07 -9.43 43.5 48.5 16.22 1.07 31.72 - - Peak 149.31 31.8 -11.7 43.5 45.11 16.98 1.26 31.55 - - Peak 474.26 28.45 -17.55 46 34 23.35 2.36 31.26 - - Peak Note: 1. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 2. Emission level (dBμV/m) = 20 log Emission level (μV/m). 3. Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor= Level. Sporton International (Shenzhen) Inc. Page Number : C3 of C3 TEL : +86-755-8637-9589 Report Issued Date : Dec. 06, 2018 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: V5P-D2204GMA Report Template No.: BU5-FR15CNFC Version 2.0


Document Created: 2019-09-09 21:18:55
Document Modified: 2019-09-09 21:18:55
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC