Test Report 15B main

FCC ID: V2TSDHTAG3NFC

Test Report

Download: PDF
FCCID_4508966

TEST REPORT No.: 17-1-0133808T05a-C1 According to: FCC Regulations Part 15B Part 15.109 (Class B limits) ISED-Regulations ICES-003, Issue 6 for WITTE - Velbert GmbH & Co. KG DAG SDH TAG3 NFC Outer Door Handle with NFC FCC ID: V2T-SDHTAG3NFC Laboratory Accreditation and Listings Accredited EMC-Test Laboratory accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: info@cetecom.com • Internet: www.cetecom.com Page 1 of 15 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM

Test Report 17-1-0133808T05a-C1, Page 2 of 15 Table of contents 1. SUMMARY OF TEST RESULTS 3 1.1. TEST OVERVIEW ACCORDING FCC PART 15B 3 2. ADMINISTRATIVE DATA 4 2.1. Identification of the testing laboratory 4 2.2. Test location 4 2.3. Organizational items 4 2.4. Applicant’s details 4 2.5. Manufacturer’s details 4 3. EQUIPMENT UNDER TEST (EUT) 5 3.1. EUT: Type, S/N etc. and short descriptions used in this test report 5 3.2. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions 5 3.3. EUT set-ups 5 3.4. EUT operating modes 5 3.5. Additional declaration and description of EUT 6 3.6. Configuration of cables used for testing 6 4. DESCRIPTION OF TEST SYSTEM SET-UP’S 7 4.1. Test system set-up for radiated electric field measurement 30 MHz to 1 GHz 7 5. MEASUREMENTS 8 5.1. General Limit - Radiated field strength emissions, 30 MHz - 1 GHz 8 5.2. Measurement uncertainties 9 6. ABBREVIATIONS USED IN THIS REPORT 10 7. ACCREDITATION DETAILS OF CETECOM’S LABORATORIES AND TEST SITES 10 8. INSTRUMENTS AND ANCILLARY 11 9. VERSIONS OF TEST REPORTS (CHANGE HISTORY) 15 Table of annex Total pages Annex 1: Measurement diagram, separate document CETECOM-TR17-1-0133808T05a-A1-C1 4 Annex 2: Internal photographs, separate document to be issue by applicant NOT ISSUED Annex 3: External photographs, separate document CETECOM-TR17-1-0133808T05a-A3-C1 6 Annex 4: Test set-up photographs, separate document CETECOM-TR17-1-0133808T05a-A4-C1 3 The listed attachments are an integral part of this report. CETECOM_TR17_1_0133808T05a_C1.docx

Test Report 17-1-0133808T05a-C1, Page 3 of 15 1. Summary of test results The test results apply exclusively to the test samples as presented in this Report. The CETECOM GmbH does not assume responsibility for any conclusions and generalizations taken in conjunction with other specimens or samples of the type of the item presented to tests. Also we refer on special conditions which the applicant should fulfill according §2.927 to §2.948, special focus regarding modification of the equipment and availability of sample equipment for market surveillance tests. The Equipment Under Test (in this report, hereinafter referred as EUT) is a digital device with no support of radiofrequency technologies. A typical operating mode (one or more) as used in the real usage was tested or a special test program simulating this was used. Pls. see chapter Operating-Mode for more details. Following tests have been performed to show compliance with applicable standards as shown in table below: 1.1. TEST OVERVIEW ACCORDING FCC PART 15B No. of References & Limits EUT EUT Diagram Test case Port op- Result set-up group FCC Standard ISED Standard Test limit mode FCC 15.109 Receiver class B limits Cabinet + radiated ICES-003, Issue 3 Interconnec §15.109 1 1 Passed emissions 6 ICES-003, Issue 6, ting cables 30 MHz-1 GHz Chapter 6.2.1, Table 5 Test report CETECOM-TR17-1-0133808T05a-C1 replace test report CETECOM-TR17-1-0133808T05a, issued 2019-10-18. The replaced test report gets invalid herewith. Digital signiert von: CN = Hicham Laayouni email = hicham. Christian Lorenz laayouni@cetecom.com Datum: 2019.11.07 C = DE O = CETECOM 12:19:38 +01'00' 2019.11.07 11:03:11 + 01'00' ...................................................... .................................................... Dipl.-Ing. Christian Lorenz B.Sc. H. Laayouni Responsible for test section Responsible for test report CETECOM_TR17_1_0133808T05a_C1.docx

Test Report 17-1-0133808T05a-C1, Page 4 of 15 2. Administrative Data 2.1. Identification of the testing laboratory Company name: CETECOM GmbH Address: Im Teelbruch 116 45219 Essen - Kettwig Germany Responsible for testing laboratory: Volker Wittmann Deputy: Dipl.-Ing. Niels Jeß 2.2. Test location 2.2.1. Test laboratory “CTC” Company name: see chapter 2.1. Identification of the testing laboratory 2.3. Organizational items Responsible for test report and project leader: B.Sc. H. Laayouni Receipt of EUT: 2019-10-09 Date(s) of test: 2019-10-10 Date of report: 2019-11-07 ----------------------------------------------------------------------------------------------------------------------------------------------------- Version of template: 13.02 2.4. Applicant’s details Applicant’s name: WITTE - Velbert GmbH & Co. KG Address: Höferstraße 3-15 42551, Velbert Germany Contact person: Mr. Kay Lackmann 2.5. Manufacturer’s details Manufacturer’s name: please see applicant´s details Address: please see applicant´s details CETECOM_TR17_1_0133808T05a_C1.docx

Test Report 17-1-0133808T05a-C1, Page 5 of 15 3. Equipment under test (EUT) 3.1. EUT: Type, S/N etc. and short descriptions used in this test report Short S/N HW SW descrip- EUT Type serial number hardware software tion*) status status EUT A DAG SDH TAG3 Outer Door Handle 191004-03 19.45.00 19.28.11 S45 NFC with NFC *) EUT short description is used to simplify the identification of the EUT in this test report. 3.2. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions AE S/N HW SW short Auxiliary Equipment Type serial number hardware software status descrip- status tion *) AE 1 Shield -- 190514_023 -- -- BearingBracket Homologation AE 2 DH Electronic D5-2 D5-2 Electronic DAG SDH Banana to Banana AE 3 Power Cable -- -- -- Cable Yuasa (12V, AE 4 Battery 1807303L -- -- 4AH)/NP4-12S *) AE short description is used to simplify the identification of the auxiliary equipment in this test report. 3.3. EUT set-ups EUT set-up Combination of EUT and AE Remarks no.*) set. 1 EUT A + AE1 + AE2 + AE3 + AE4 -- *) EUT set-up no. is used to simplify the identification of the EUT set-up in this test report. 3.4. EUT operating modes EUT Description of operating Additional information operating modes mode no.*)  EUT Powered on and processor running op. 1 Ping-Mode  Without NFC continuous fire. *) EUT operating mode no. is used to simplify the test report. CETECOM_TR17_1_0133808T05a_C1.docx

Test Report 17-1-0133808T05a-C1, Page 6 of 15 3.5. Additional declaration and description of EUT (Applicant's declaration,  = not selected,  = selected) EUT A  table-top typical use typical operating cycle of EUT.  floor-  portable use  < 0,5 sec. standing  fixed use  :  wall-mounted  vehicular use  not defined Place of use  Residential, commercial and light industry  Industrial environment  vehicular use Highest internal frequency generated by EUT  less than 108 MHz -> up to 1 GHz and required upper frequency of radiated  108 MHz - 500 MHz -> up to 2 GHz disturbance measurement  500 MHz - 1 GHz -> up to 5 or 6 GHz Power line: EUT-grounding: (in case of deviation during tests the  DC  12V  none single details are described on  with power supply chapter 4)  additional: Other Ports possible total cable length shielding connected during test (description of interconnecting cables) Connector 1. Power Cable Banana  < 3m > 3m  screened  yes  : other  unscreened  no Does EUT contain devices susceptible to magnetic fields, e.g. Hall elements, electrodynamics  yes microphones, etc.?  no  yes Is mounting position / usual operating position defined?  no 3.6. Configuration of cables used for testing Cable S/N HW Cable length number Item Type serial number hardware status Cable 1 Power Cable Banana to Banana -- -- 100cm Cable CETECOM_TR17_1_0133808T05a_C1.docx

Test Report 17-1-0133808T05a-C1, Page 7 of 15 4. Description of test system set-up’s 4.1. Test system set-up for radiated electric field measurement 30 MHz to 1 GHz Specification: ANSI C63.4-2014 chapter 8.2.3, ANSI C63.10-2013 chapter 6.5 General Description: Evaluating the field emissions have to be done first by an exploratory emissions measurement and a final measurement for most critical frequencies. The tests are performed in a NSA-compliant semi anechoic room (SAR) recognized by the regulatory commissions. Schematic: Testing method: Exploratory, preliminary measurements Final measurement on critical frequencies The EUT and its associated accessories are placed Based on the exploratory measurements, the most on a non-conductive position manipulator (tipping critical frequencies are re-measured by main- device) of 0.8 m height which is placed on the taining the EUT’s worst-case operation mode, cable turntable. By rotating the turntable (range 0° to position, etc. either on 10m OATS or 3m semi- 360°, step 90°) and the EUT itself either on 3- anechoic room. orthogonal axis (portable equipment) or 2- orthogonal axis (defined operational position of First a frequency zoom around the critical frequency EUT) the emission spectrum and it’s is done to locate the frequency more precisely. After characteristics was recorded with an EMI- this step, for all identified critical frequencies, the receiver, broadband antenna and software. maximum peak was determined. Measurement antenna: horizontal and vertical, Following parameters were varied: the turntable heights: 1,0 m and 1,82 m as worst-case angle continuously in the range 0 to 360 degree, the determined by an exploratory emission EUT itself either over 3-orthogonal axis (not measurements. The results are documented in a defined usage position) or 2-orthogonal axis diagram. Critical frequencies (low margin to (defined usage position). The measurement antenna limit) are saved within a table for further height between 1 m and 4 m. investigations. If various operating modes are supported, further investigations are made to find On the determined worst-case position, a final the worst-case of them. Also the interconnection measurement with necessary bandwidth and cables and equipment position were varied in detector according standard has been carried out. order to maximize the emissions. Formula: EC = ER + AF + CL + DF - GA (1) AF = Antenna factor CL = Cable loss M = LT - EC (2) DF = Distance correction factor (if used) EC = Electrical field – corrected value ER = Receiver reading GA = Gain of pre-amplifier (if used) LT = Limit M = Margin All units are dB-units, positive margin means value is below limit. CETECOM_TR17_1_0133808T05a_C1.docx

Test Report 17-1-0133808T05a-C1, Page 8 of 15 5. Measurements 5.1. General Limit - Radiated field strength emissions, 30 MHz - 1 GHz 5.1.1. Test location and equipment test location  CETECOM Essen (Chapter. 2.2.1)  Please see Chapter. 2.2.2  Please see Chapter. 2.2.3 test site  441 EMI SAR  487 SAR NSA receiver  377 ESCS30  001 ESVS 30  489 ESU 40  620 ESU 26 spectr. analys.  584 FSU  120 FSEM  264 FSEK antenna  574 BTA-L  133 EMCO3115  302 BBHA9170  289 CBL 6141  030 HFH-Z2  477 GPS signalling  392 MT8820A  371 CBT32  547 CMU  594 CMW DC power  Battery Powered  457 EA 3013A  459 EA 2032-50  268 EA- 3050  494 AG6632A  498 NGPE 5.1.2. Requirements/Limits FCC  Part 15 Subpart B, §15.109, class B  Part 15 Subpart C, §15.209 @ frequencies defined in §15.205  RSS-Gen., Issue 5, Chapter 8.9, Table 5+6+7 (licence-exempt radio apparatus)  RSS-Gen., Issue 5, Chapter 7.3, Table 3 (receiver) ISED (IC)  ICES-003, Issue 6, Table 4(class A)/Table 5(Class B)  RSS-247, Issue 2, Chapter 5.5  RSS-247, Issue 2, Chapter 6.2  C63.4-2014 ANSI  C63.10-2013 Radiated emissions limits, 3 meters Frequency [MHz] QUASI Peak [µV/m] QUASI-Peak [dBµV/m] 30 - 88 100 40.0 Limit 88 - 216 150 43.5 216 - 960 200 46.0 above 960 500 54.0 5.1.3. Test condition and measurement test set-up Signal link to test system (if used):  air link  cable connection  none EUT-grounding  none  with power supply  additional connection Equipment set up  table top 0.8m hight  floor standing Climatic conditions Temperature: (22±3°C) Rel. humidity: (40±20)% EMI-Receiver Scan frequency range:  30 – 1000 MHz  other: (Analyzer) Settings Scan-Mode  6 dB EMI-Receiver Mode  3 dB spectrum analyser mode Detector Peak / Quasi-peak RBW/VBW 100 kHz/300 kHz Mode: Repetitive-Scan, max-hold Scan step 80 kHz Sweep-Time Coupled – calibrated display if continuous tx-signal otherwise adapted to EUT’s individual duty-cycle General measurement procedures Please see chapter “Test system set-up for electric field measurement in the range 30 MHz to 1 GHz” 5.1.4. MEASUREMENT RESULTS The results are presented below in summary form only. For more information please consult the diagrams included in annex 1. Dia- Set- OP- Used detector Result Frequency gram up mode Remark range no. no. no. PK AV QP 30 MHz – 1 3.01 1 1 EUT position standing    passed GHz 30 MHz – 1 3.02 1 1 EUT position laying    passed GHz Remark: see diagrams in annex 1 for more details CETECOM_TR17_1_0133808T05a_C1.docx

Test Report 17-1-0133808T05a-C1, Page 9 of 15 5.2. Measurement uncertainties The reported uncertainties are calculated based on the standard uncertainty multiplied with the appropriate coverage factor k, such that a confidence level of approximately 95% is achieved. For uncertainty determination, each component used in the concrete measurement set-up was taken in account and it’s contribution to the overall uncertainty according it’s statistical distribution calculated. Following table shows expectable uncertainties for each measurement type performed. Calculated uncertainty based on a RF-Measurement Reference Frequency range Remarks confidence level of 95% Conducted emissions 9 kHz - 150 kHz 4.0 dB CISPR 16-2-1 - (U CISPR) 150 kHz - 30 MHz 3.6 dB Radiated emissions 30 MHz - 1 GHz 4.2 dB CISPR 16-2-3 E-Field Enclosure 1 GHz - 18 GHz 5.1 dB Disturbance power CISPR 16-2-2 30 MHz - 300 MHz - - Substitution Power Output radiated - 30 MHz - 4 GHz 3.17 dB method Cel- Cel- Set-up No. BT1 W1 W2 -- C1 C2 Power Output conducted - 9 kHz - 12.75 GHz N/A 0.60 0.7 0.25 N/A -- - 12.75 - 26.5GHz N/A 0.82 -- N/A N/A -- Conducted emissions - 9 kHz - 2.8 GHz 0.70 N/A 0.70 N/A 0.69 -- N/A - not on RF-port 2.8 GHz - 12.75GHz 1.48 N/A 1.51 N/A 1.43 -- applicable 12.75 GHz - 18GHz 1.81 N/A 1.83 N/A 1.77 -- 18 GHz - 26.5GHz 1.83 N/A 1.85 N/A 1.79 -- Power density - 1 – 2.8GHz 1.40 dB -- 0.1272 ppm (Delta Marker) Frequency Occupied bandwidth - 9 kHz - 4 GHz error 1.0 dB Power - 0.1272 ppm (Delta Marker) Frequency Emission bandwidth 9 kHz - 4 GHz error - See above: 0.70 dB Power Frequency stability - 9 kHz - 20 GHz 0.0636 ppm - 150 kHz - 30 MHz 5.0 dB Magnetic Radiated emissions 30 MHz - 1 GHz 4.2 dB field - Enclosure 1 GHz - 20 GHz 3.17 dB E-field Substitution Table: measurement uncertainties, valid for conducted/radiated measurements CETECOM_TR17_1_0133808T05a_C1.docx

Test Report 17-1-0133808T05a-C1, Page 10 of 15 6. Abbreviations used in this report The abbreviations ANSI American National Standards Institute AV , AVG, CAV Average detector EIRP Equivalent isotropic radiated power, determined within a separate measurement EGPRS Enhanced General Packet Radio Service EUT Equipment Under Test FCC Federal Communications Commission, USA ISED Innovation, Science and Economic Development IC Industry Canada n.a. not applicable Op-Mode Operating mode of the equipment PK Peak RBW resolution bandwidth RF Radio frequency RSS Radio Standards Specification, Documents from Industry Canada Rx Receiver TCH Traffic channel Tx Transmitter QP Quasi peak detector VBW Video bandwidth ERP Effective radiated power 7. Accreditation details of CETECOM’s laboratories and test sites Ref.- Accreditation Valid for laboratory area or test site No. Certificate Accreditation Body - D-PL- DAkkS, Deutsche All laboratories and test sites of CETECOM GmbH, Essen 12047-01-01 Akkreditierungsstelle GmbH 337 Radiated Measurements 30 MHz to 1 GHz, 3 m / 10 m (OATS) 487 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) FCC, Federal Communications (MRA US-EU 558 Radiated Measurements above 1 GHz, 3 m (FAR) Commission 0003) 348 Mains Ports Conducted Interference Measurements Laboratory Division, USA 348 Telecommunication Ports Conducted Interference Measurem. 337 -- Radiated Measurements 30 MHz to 1 GHz, 3 m / 10 m (OATS) ISED, Industry Canada 487 3462D-2 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) Certification and Engineering 550 3462D-2 Radiated Measurements 1 GHz to 6 GHz, 3 m (SAR) Bureau 558 3462D-3 Radiated Measurements above 1 GHz, 3 m (FAR) 487 R- 4452 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) VCCI, Voluntary Control Council 550 G- 20013 Radiated Measurements 1 GHz to 6 GHz, 3 m (SAR) for Interference by Information 348 C- 20009 Mains Ports Conducted Interference Measurements Technology Equipment, Japan 348 T- 20006 Telecommunication Ports Conducted Interference Measurem. OATS = Open Area Test Site, SAR = Semi Anechoic Room, FAR = Fully Anechoic Room CETECOM_TR17_1_0133808T05a_C1.docx

Test Report 17-1-0133808T05a-C1, Page 11 of 15 8. Instruments and Ancillary The “Ref.-No” in the left column of the following tables allows the clear identification of the laboratory equipment. 8.1.1. Test software and firmware of equipment Ref.-No. Equipment Type Serial-No. Version of Firmware or Software during the test 012 Signal Generator (EMS-cond.) SMY 01 839069/027 Firm.= V 2.02 013 Power Meter (EMS cond.) NRVD 839111/003 Firm.= V 1.51 017 Digital Radiocommunication Tester CMD 60 M 844365/014 Firmware = V 3.52 .22.01.99, DECT = D2.87 13.01.99 RT Harmonics Analyzer dig. 119 B10 G60547 Firm.= V 3.1DHG Flickermeter 261 Thermal Power Sensor NRV-Z55 825083/0008 EPROM-Datum 02.12.04, SE EE 1 B 262 Power Meter NRV-S 825770/0010 Firm.= 2.6 UNIT Firmware= 4.04, SW-Main=4.04, SW-BBP=1.04, 295 Racal Digital Radio Test Set 6103 1572 SW-DSP=1.02, Hardboot=1.02, Softboot=2.02 R&S Test Firmware =3.53 /3.54 (current Testsoftw. f. all 298 Univ. Radio Communication Tester CMU 200 832221/091 band used 323 Digital Radiocommunication Tester CMD 55 825878/0034 Firm.= 3.52 .22.01.99 System EMS 335 CTC-EMS-Conducted - EMC 32 V 8.52 Conducted 340 Digital Radiocommunication Tester CMD 55 849709/037 Firm.= 3.52 .22.01.99 366 Ultra Compact Simulator UCS 500 M4 V0531100594 Firm. UCS 500=001925/3.06a02, rc=ISMIEC 4.10 371 Bluetooth Tester CBT32 100153 CBT V5,30+ SW-Option K55, K57 377 EMI Test Receiver ESCS 30 100160 Firm.= 2.30, OTP= 02.01, GRA= 02.36 378 Broadband RF Field Monitor RadiSense III 03D00013SNO-08 Firm.= V.03D13 389 Digital Multimeter Keithley 2000 0583926 Firm. = A13 (Mainboard) A02 (Display) Firm.= 4.50 #005, IPL=4.01#001,OS=4.02#001, 392 Radio Communication Tester MT8820A 6K00000788 GSM=4.41#013, W-CDMA= 4.54#004, scenario= R&S Test Firmware Base=5.14, Mess-Software= 436 Univ. Radio Communication Tester CMU 200 103083 GSM:5.14 WCDMA:5.14 (current Testsoftw. F. all band System EMI field 441 CTC-SAR-EMI Cable Loss - EMC 32 Version 8.52 (SAR) System EMS field 442 CTC-SAR-EMS - EMC 32 Version 8.40 (SAR) System CTC-FAR- 443 CTC-FAR-EMI-RSE - Spuri 7.2.5 or EMC 32 Ver. 9.15.00 EMI-RSE System-EMS-Field 444 CTC-FAR-EMS field - EMC 32 Version 9.15.00 (FAR) R&S Test Firmware Base=5.14, GSM=5.14 460 Univ. Radio Communication Tester CMU 200 108901 WCDMA=5.14 (current Testsoftw.,f. all band to be used, 489 EMI Test Receiver ESU40 1000-30 Firmware=4.43 SP3, Bios=V5.1-16-3, Spec. =01.00 491 ESD Simulator dito ESD dito dito307022 V 2.30 524 Voltage Drop Simulator VDS 200 0196-16 Software Nr: 000037 Version V4.20a01 526 Burst Generator EFT 200 A 0496-06 Software Nr. 000034 Version V2.32 527 Micro Pulse Generator MPG 200 B 0496-05 Software-Nr. 000030 Version V2.43 528 Load Dump Simulator LD 200B 0496-06 Software-Nr. 000031 Version V2.35a01 R&S Test Firmware Base=5.14, GSM=5.14 546 Univ. Radio Communication Tester CMU 200 106436 WCDMA=5.14 (current Testsoftw.,f. all band to be used R&S Test Firmware Base=V5.1403 (current Testsoftw., 547 Univ. Radio Communication Tester CMU 200 835390/014 f. all band used, GSM = 5.14 WCDMA: = 5.14 584 Spectrum Analyzer FSU 8 100248 2.82_SP3 R&S Test Firmware Base=5.01, GSM=5.02 WCDMA= 597 Univ. Radio Communication Tester CMU 200 100347 not installed, Mainboard= µP1=V.850 607 Signal Generator SMR 20 832033/011 V1.25 620 EMI Test Receiver ESU 26 100362 4.43_SP3 642 Wideband Radio Communication Tester CMW 500 126089 Setup V03.26, Test programm component V03.02.20 670 Univ. Radio Communication Tester CMU 200 106833 µP1 =V8.50, Firmware = V.20 689 Vector Signal Generator SMU200 100970 02.20.360.142 CBT V 5.40, FW: V.2.41 (FPGA Digital, V. 3.09 FPGA 692 Bluetooth Tester CBT 32 100236 RF) 699 Audio Analyzer UPL16 833494/005 3.06 CETECOM_TR17_1_0133808T05a_C1.docx

Test Report 17-1-0133808T05a-C1, Page 12 of 15 8.1.2. Single instruments and test systems Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 005 AC - LISN (50 Ohm/50µH, test site 1) ESH2-Z5 861741/005 Rohde & Schwarz 12 M - 23.05.2020 007 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 892563/002 Rohde & Schwarz 12 M - 23.05.2020 009 Power Meter (EMS-radiated) NRV 863056/017 Rohde & Schwarz 24 M - 23.05.2021 016 Line Impedance Simulating Network Op. 24-D B6366 Spitzenberger+Spies 36 M - 22.05.2022 36/12 020 Horn Antenna 18 GHz (Subst 1) 3115 9107-3699 EMCO - 31.07.2021 M 021 Loop Antenna (H-Field) 6502 9206-2770 EMCO 36 M - 30.05.2021 033 RF-current probe (100kHz-30MHz) ESH2-Z1 879581/18 Rohde & Schwarz 24 M - 23.05.2021 057 relay-switch-unit (EMS system) RSU 494440/002 Rohde & Schwarz pre-m 1a 060 power amplifier (DC-2kHz) PAS 5000 B6363 Spitzenberger+Spies - 3 WRCT 1900/2200-5/40- 066 notch filter (WCDMA; FDD1) 5 Wainwright GmbH 12 M 1g 16.11.2019 10EEK 086 DC - power supply, 0 -10 A LNG 50-10 - Heinzinger Electronic pre-m 2 087 DC - power supply, 0 -5 A EA-3013 S - Elektro Automatik pre-m 2 091 USB-LWL-Converter OLS-1 007/2006 Ing. Büro Scheiba - 4 099 passive voltage probe ESH2-Z3 299.7810.52 Rohde & Schwarz 36 M - 30.05.2021 100 passive voltage probe Probe TK 9416 without Schwarzbeck 36 M - 30.05.2021 110 USB-LWL-Converter OLS-1 - Ing. Büro Scheiba - 4 RT Harmonics Analyzer dig. 119 B10 G60547 BOCONSULT 36 M - 22.05.2022 Flickermeter 133 horn antenna 18 GHz (Meas 1) 3115 9012-3629 EMCO 36 M 1c 10.03.2020 134 horn antenna 18 GHz (Subst 2) 3115 9005-3414 EMCO 36 M - 10.03.2020 248 attenuator SMA 6dB 2W - Radiall pre-m 2 249 attenuator SMA 10dB 10W - Radiall pre-m 2 252 attenuator N 6dB 12W - Radiall pre-m 2 256 attenuator SMA 3dB 2W - Radiall pre-m 2 257 hybrid 4031C 04491 Narda pre-m 2 260 hybrid coupler 4032C 11342 Narda pre-m 2 261 Thermal Power Sensor NRV-Z55 825083/0008 Rohde & Schwarz 24 M - 30.05.2020 262 Power Meter NRV-S 825770/0010 Rohde & Schwarz 24 M - 30.05.2020 265 peak power sensor NRV-Z33, Model 04 840414/009 Rohde & Schwarz 24 M - 30.05.2020 266 Peak Power Sensor NRV-Z31, Model 04 843383/016 Rohde & Schwarz 24 M - 30.05.2020 267 notch filter GSM 850 WRCA 800/960-6EEK 9 Wainwright GmbH pre-m 2 270 termination 1418 N BB6935 Weinschel pre-m 2 271 termination 1418 N BE6384 Weinschel pre-m 2 272 attenuator (20 dB) 50 W Model 47 BF6239 Weinschel pre-m 2 273 attenuator (10 dB) 100 W Model 48 BF9229 Weinschel pre-m 2 274 attenuator (10 dB) 50 W Model 47 (10 dB) 50 W BG0321 Weinschel pre-m 2 275 DC-Block Model 7003 (N) C5129 Weinschel pre-m 2 276 DC-Block Model 7006 (SMA) C7061 Weinschel pre-m 2 279 power divider 1515 (SMA) LH855 Weinschel pre-m 2 AMF-2D-100M4G-35- 287 pre-amplifier 25MHz - 4GHz 379418 Miteq 12 M 1c 16.11.2019 10P 291 high pass filter GSM 850/900 WHJ 2200-4EE 14 Wainwright GmbH 12 M 1c 16.11.2019 298 Univ. Radio Communication Tester CMU 200 832221/091 Rohde & Schwarz pre-m 3 300 AC LISN (50 Ohm/50µH, 1-phase) ESH3-Z5 892 239/020 Rohde & Schwarz 12 M - 22.05.2020 301 attenuator (20 dB) 50W, 18GHz 47-20-33 AW0272 Lucas Weinschel pre-m 2 302 horn antenna 40 GHz (Meas 1) BBHA9170 155 Schwarzbeck 36 M - 14.03.2020 303 horn antenna 40 GHz (Subst 1) BBHA9170 156 Schwarzbeck 36 M - 20.03.2020 331 Climatic Test Chamber -40/+180 Grad HC 4055 43146 Heraeus Vötsch 24 M - 10.01.2021 341 Digital Multimeter Fluke 112 81650455 Fluke 24 M - 30.05.2020 342 Digital Multimeter Voltcraft M-4660A IB 255466 Voltcraft 24 M - 23.05.2021 347 laboratory site radio lab. - - - 5 348 laboratory site EMI conducted - - - 5 354 DC - Power Supply 40A NGPE 40/40 448 Rohde & Schwarz pre-m 2 357 power sensor NRV-Z1 861761/002 Rohde & Schwarz 24 M - 21.05.2021 373 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 100535 Rohde & Schwarz 12 M - 22.05.2020 377 EMI Test Receiver ESCS 30 100160 Rohde & Schwarz 12 M - 22.05.2020 389 Digital Multimeter Keithley 2000 0583926 Keithley pre-m - 392 Radio Communication Tester MT8820A 6K00000788 Anritsu 12 M - 01.07.2020 396 Thermo/Hygrometer Thermo/Hygrometer - Conrad 24 M - 09.01.2021 431 Model 7405 Near-Field Probe Set 9305-2457 EMCO - 4 436 Univ. Radio Communication Tester CMU 200 103083 Rohde & Schwarz 12 M - 25.05.2020 439 UltraLog-Antenna HL 562 100248 Rohde & Schwarz 36 M - 10.03.2020 System CTC-FAR-EMI- ETS-Lindgren / 443 CTC-FAR-EMI-RSE - 12 M 5 16.11.2019 RSE CETECOM WRCT 1850.0/2170.0- Wainwright 448 notch filter WCDMA_FDD II 5 12 M 1c 16.11.2019 5/40-10SSK Instruments GmbH WRCT 824.0/894.0-5/40- 449 notch filter WCDMA FDD V 1 Wainwright 12 M 1c 16.11.2019 8SSK 454 Oscilloscope HM 205-3 9210 P 29661 Hameg - 4 456 DC-Power supply 0-5 A EA 3013 S 207810 Elektro Automatik pre-m 2 459 DC -Power supply 0-5 A , 0-32 V EA-PS 2032-50 910722 Elektro Automatik pre-m 2 CETECOM_TR17_1_0133808T05a_C1.docx

Test Report 17-1-0133808T05a-C1, Page 13 of 15 Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 460 Univ. Radio Communication Tester CMU 200 108901 Rohde & Schwarz 12 M - 30.05.2020 463 Universal source HP3245A 2831A03472 Agilent - 4 466 Digital Multimeter Fluke 112 89210157 Fluke USA 24 M - 30.05.2020 467 Digital Multimeter Fluke 112 89680306 Fluke USA 36 M - 30.05.2021 468 Digital Multimeter Fluke 112 90090455 Fluke USA 36 M - 30.04.2021 477 ReRadiating GPS-System AS-47 - Automotive Cons. Fink - 3 480 power meter (Fula) NRVS 838392/031 Rohde & Schwarz 24 M - 30.05.2021 482 filter matrix Filter matrix SAR 1 - CETECOM (Brl) - 1d AMF-5D-02501800-25- 484 pre-amplifier 2,5 - 18 GHz 1244554 Miteq 12 M - 16.11.2019 10P System CTC NSA-Verification SAR- System EMI field (SAR) ETS Lindgren / 487 - 24 M - 16.04.2021 EMI NSA CETECOM 489 EMI Test Receiver ESU40 1000-30 Rohde & Schwarz 12 M - 30.06.2020 WRCG 1709/1786- 502 band reject filter SN 9 Wainwright pre-m 2 1699/1796- WRCG 824/849-814/859- 503 band reject filter SN 5 Wainwright pre-m 2 60/10SS WRCA 800/960-02/40- 512 notch filter GSM 850 SN 24 Wainwrght 12 M 1c 16.11.2019 6EEK HF Relais Box Keithley 517 relais switch matrix SE 04 Keithley pre-m 2 System 523 Digital Multimeter L4411A MY46000154 Agilent 24 M - 23.05.2021 529 6 dB Broadband resistive power divider Model 1515 LH 855 Weinschel pre-m 2 10 dB Broadband resistive power 530 R 416110000 LOT 9828 - pre-m 2 divider 36/12 549 Log.Per-Antenna HL025 1000060 Rohde & Schwarz - 31.07.2021 M 552 high pass filter 2,8-18GHz WHKX 2.8/18G-10SS 4 Wainwright 12 M 1c 16.11.2019 557 System CTC-OTA-2 R&S TS8991 - Rohde & Schwarz 12 M 5 24.01.2020 36/12 574 Biconilog Hybrid Antenna BTA-L 980026L Frankonia - 03.05.2022 M 584 Spectrum Analyzer FSU 8 100248 Rohde & Schwarz pre-m - 594 Wideband Radio Communication Tester CMW 500 101757 Rohde & Schwarz 12 M - 26.06.2020 597 Univ. Radio Communication Tester CMU 200 100347 Rohde & Schwarz pre-m - 600 power meter NRVD (Reserve) 834501/018 Rohde & Schwarz 24 M - 30.05.2021 602 peak power sensor NRV-Z32 (Reserve) 835080 Rohde & Schwarz 24 M - 611 DC power supply E3632A KR 75305854 Agilent pre-m 2 612 DC power supply E3632A MY 40001321 Agilent pre-m 2 613 Attenuator R416120000 20dB 10W Lot. 9828 Radiall pre-m 2 616 Digitalmultimeter Fluke 177 88900339 Fluke 24 M - 30.05.2020 617 Power Splitter/Combiner ZFSC-2-2-S+ S F987001108 Mini Circuits - 2 618 Power Splitter/Combiner 50PD-634 600994 JFW Industries USA - 2 619 Power Splitter/Combiner 50PD-634 600995 JFW Industries, USA - 3 620 EMI Test Receiver ESU 26 100362 Rohde-Schwarz 12 M - 30.05.2020 621 Step Attenuator 0-139 dB RSP 100017 Rohde & Schwarz pre-m 2 625 Generic Test Load USB Generic Test Load USB - CETECOM - 2 634 Spectrum Analyzer FSM (HF-Unit) 826188/010 Rohde & Schwarz pre-m 2 HDMI cable with 637 High Speed HDMI with Ethernet 1m - KogiLink - 2 Ethernet 1m HDMI cable with 638 HDMI Kabel with Ethernet 1,5 m flach - Reichelt - 2 Ethernet 1,5m 640 HDMI cable 2m rund HDMI cable 2m rund - Reichelt - 2 Certified HDMI cable 641 HDMI cable with Ethernet - PureLink - 2 with 644 Amplifierer ZX60-2534M+ SN865701299 Mini-Circuits - - 670 Univ. Radio Communication Tester CMU 200 106833 Rohde & Schwarz 24 M - 30.05.2020 671 DC-power supply 0-5 A EA-3013S - Elektro Automatik pre-m 2 678 Power Meter NRP 101638 Rohde&Schwarz pre-m - 683 Spectrum Analyzer FSU 26 200571 Rohde & Schwarz 12 M - 30.05.2020 687 Signal Generator SMF 100A 102073 Rohde&Schwarz 12 M - 30.05.2020 688 Pre Amp JS-18004000-40-8P 1750117 Miteq pre-m - 690 Spectrum Analyzer FSU 100302/026 Rohde&Schwarz 24 M - 30.05.2021 691 OSP120 Base Unit OSP120 106833 Rohde & Schwarz 12 M - 30.05.2020 692 Bluetooth Tester CBT 32 100236 Rohde & Schwarz 36 M - 29.05.2020 CTC-Radio Lab 693 TS8997 - Rohde&Schwarz 12 M 5 07.01.2020 1_TS8997 697 Power Splitter ZN4PD-642W-S+ 165001445 Mini-Circuits - 2 701 CMW500 wide. Radio Comm. CMW500 158150 Rohde & Schwarz 24 M - 30.07.2020 MA 4010-KT080-XPET- MA4170-KT100- 703 INNCO Antennen Mast INNCO pre-m - ZSS3 XPET-ZSS3 CO3000/933/384105 INNCO Systems 704 INNCON Controller CO 3000-4port pre-m - 16/L GmBh 711 Harmonic Mixer 90 GHz - 140GHz RPG FS-Z140 101004 RPG 36 M - 22.02.2020 712 Harmonic Mixer 75 GHz - 110GHz FS-Z110 101468 Rohde & Schwarz 36 M - 22.02.2020 713 Harmonic Mixer, 50 GHz - 75GHz FS-Z75 101022 Rohde & Schwarz 24 M - 05.07.2021 714 Signal Analyzer 67GHz FSW67 104023 Rohde & Schwarz 24 M - 04.07.2021 715 Harmonic Mixer, 140 GHz - 220GHz FS-Z220 101009 RPG Radiometer 36 M - 03.08.2020 CETECOM_TR17_1_0133808T05a_C1.docx

Test Report 17-1-0133808T05a-C1, Page 14 of 15 Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due Physics RPG Radiometer 716 Harmonic Mixer 220 GHz to 325 GHZ FS-Z325 101005 36 M - 13.02.2020 Physics 747 Spectrum Analyzer FSU 26 200152 Rohde & Schwarz 12 M - 30.05.2020 748 Pickett-Potter Horn Antenna FH-PP 4060 010001 Radiometer Physiscs 36 M - 750 Pickett-Potter Horn Antenna FH-PP 220 010011 Radiometer Physics 36 M - 751 Digital Optical System optoCAN-FD Transceiver 17-010416 mk-messtechnik GmbH - - 752 Digital Optical System optoCAN-FD Transceiver 17-010083 mk-messtechnik GmbH - - 753 Digital Optical System optoCAN-FD Transceiver 17-010084 mk-messtechnik GmbH - - 754 Digital Optical System optoCAN-FD Transceiver 17-010415 mk-messtechnik GmbH - - optoLAN-100-MAX 755 Digital Optical System 17-010795 mk-messtechnik GmbH - - Transceiver WIDEBAND RADIO 757 CMW500 163673 Rohde&Schwarz 12 M - 30.05.2020 COMMUNICATION Elektro-Automatik 781 Power Supply PS 2042-10 B 2815450369 - - GmbH &Co.KG lektro-Automatik 782 Power Supply PS 2042-10 B 2815450348 - - GmbH &Co.KG 783 Spectrum Analyzer FSU 26 100414 Rohde & Schwarz 12 M - 30.05.2020 784 Power Supply NGSM 32/10 00196 Rohde & Schwarz 12 M - RF Step Attenuator 785 RSP 860712/012 Rohde & Schwarz 12 M - 0…139.9dB 786 SAR Probe ES3DV3 3340 Speag 36 M - 14.02.2021 787 OSP OSP B157WX 101264 Rohde & Schwarz 24 M - 30.05.2020 Seibersdorf 788 Precision Omnidirectional Dipole POD 618 6182558/Q 36 M - 30.06.2021 Labaratories Seibersdorf 789 Precision Omnidirectional Dipole POD 16 162496/Q 36 M - 30.06.2021 Laboratories Antenna System 790 Horn Antenna ASY-SGH-124-SMA 29F14182337 36 M - 08.10.2021 Solutions 791 Pickett-Potter Horn Antenna FH-PP-325 10024 Radiometer Physics 36 M - 792 Pickett-Potter Horn Antenna FH-PP 075 10006 Radiometer Physics 36 M - 793 Pickett-Potter Horn Antenna FH-PP 140 10008 Radiometer Physics 36 M - 794 Pickett-Potter Horn Antenna FH-PP 110 10014 Radiometer Physics 36 M - 795 SGH Antenna SGH-26-WR10 1144 Anteral S.L. 36 M - 798 WR-22 Rectangular Gain Horn SAR-2309-22-S2 13254-01 SAGE Millimeter, Inc. 36 M - 799 Transceiver optoLAN-Gb 18-014746 mk messtechnik pre-m - 801 Spectrum Analyzer FSP 13 100960 Rohde & Schwarz 24 M - 14.01.2021 NARDA Safety 802 Exposure Level Tester ELT-400 O-0026 24 M - 30.01.2021 Solutions Narda Safety Test 803 Probe ELT probe 3cm² O-0026 24 M - 30.01.2021 Solution 805 Thermo-Hygrometer Web-Thermo-Hygrometer 02749814 W&T 24 M - 806 AC2600 Smart Wifi Router Netgear Nighthawk x4S 5K5188590067B Netgear - - Direct Coupler C-05020- 807 Direct Coupler 511 ET Industries - - 10 808 Diode Power Sensor NRV-Z1 829894/001 Rohde & Schwarz 24 M - 24.05.2021 Pasternack Enterprises 809 Standard gain Horn Antenna WR-159 Horn Antenna - - - Inc. CETECOM_TR17_1_0133808T05a_C1.docx

Test Report 17-1-0133808T05a-C1, Page 15 of 15 8.1.3. Legend Note / remarks Calibrated during system calibration: 1a System CTC-SAR-EMS (Ref.-No. 442) 1b System-CTC-EMS-Conducted (Ref.-No. 335) 1c System CTC-FAR-EMI-RSE (Ref.-No . 443) 1d System CTC-SAR-EMI (Ref.-No . 441) 1e System CTC-OATS (EMI radiated) (Ref.-No. 337) 1f System CTC-CTIA-OTA (Ref.-No . 420) 1g System CTC-FAR-EMS (Ref.-No . 444) 2 Calibration or equipment check immediately before measurement 3 Regulatory maintained equipment for functional check or support purpose 4 calibration of this equipment Ancillary equipment without has no effect calibration onmechanical e.g. measuring result equipment or monitoring equipment 5 Test System Interval of calibration 12 M 12 month 24 M 24 month 36 M 36 month 24/12 M Calibration every 24 months, between this every 12 months internal validation 36/12 M Calibration every 36 months, between this every 12 months internal validation Pre-m Check before starting the measurement - Without calibration 9. Versions of test reports (change history) Version Applied changes Date of release -- Initial release 2019-10-18 C1 Removal ISED ID, new references to annexes 2019-11-07 END OF TEST REPORT CETECOM_TR17_1_0133808T05a_C1.docx


Document Created: 2019-11-07 12:19:42
Document Modified: 2019-11-07 12:19:42
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC