UNII DEVICE DECLARATION LETTER

FCC ID: UZ7MK3190

Cover Letter(s)

Download: PDF
FCCID_1822290

Motorola Solutions, Inc. Company Address :One Motorola Plaza Holtsville, NY 11742‐1300 USA Date :October 12, 2012 DTS‐UNII Device Declaration Letter To whom it may concern : We have declared below featured for FCC equipment authorization, Device FCC ID :UZ7MK3190 (1) DFS Device -- Master , Client with Radar detection capability , ■ Client without radar detection capability , N/A (2) Active / Passive Scanning , adhoc mode accesspoint capability Frequency Band Active Scanning passive scanning Ad Hoc Modeor Access point (MHz) (the device can (where the device is WIFI Direct capability transmit a probe can listen only with no capability (beacon)) probes) 2412 – 2462 MHz ■Yes , No Yes , ■No Yes , ■ No Yes , ■ No 5745 – 5825 MHz Yes , ■ No ■ Yes , No Yes , ■ No Yes , ■ No 5180 – 5240 MHz Yes , ■ No ■ Yes , No Yes , ■ No Yes , ■ No 5260 – 5320 MHz Yes , ■ No ■ Yes , No Yes , ■ No Yes , ■ No 5500 – 5700 MHz Yes , ■ No ■ Yes , No Yes , ■ No Yes , ■ No (3) Country code selection ability - Yes , ■No If yes, pls explain how it was implemented : (pls also help to provide detail of options for each country selection) (4) Meet 15.202 requirement - ■ Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices ■A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply ,■ No Apply , (If apply , pls help to provide explanation on it was implement , and how software was controlled) _____________________ Alan Parrish / Regulatory Compliance Tel: + 44 1256 484304 Email: Alan.Parrish@motorolasolutions.com



Document Created: 2012-10-17 09:34:02
Document Modified: 2012-10-17 09:34:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC