Test Report DXX

FCC ID: UZ7ET51CE

Test Report

Download: PDF
FCCID_4334218

FCC RADIO TEST REPORT Report No. : FR911633D FCC RADIO TEST REPORT FCC ID : UZ7ET51CE Equipment : Tablet Brand Name : Zebra Model Name : ET51CE Applicant : Zebra Technologies Corporation 1 Zebra Plaza, Holtsville, NY 11742 Manufacturer : Zebra Technologies Corporation 1 Zebra Plaza, Holtsville, NY 11742 Standard : FCC Part 15 Subpart C §15.225 The product was received on Jan. 16, 2019 and testing was started from May 21, 2019 and completed on Jun. 03, 2019. We, SPORTON INTERNATIONAL INC., EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any agency of government. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Reviewed by: Jones Tsai SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886-3-327-3456 Page Number : 1 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D Table of Contents History of this test report ....................................................................................................................................3 Summary of Test Result......................................................................................................................................4 1. General Description ........................................................................................................................................5 1.1 Product Feature of Equipment Under Test ............................................................................................................. 5 1.2 Product Specification of Equipment Under Test ..................................................................................................... 5 1.3 Modification of EUT ................................................................................................................................................ 5 1.4 Testing Location ..................................................................................................................................................... 6 1.5 Applicable Standards.............................................................................................................................................. 6 2. Test Configuration of Equipment Under Test ...............................................................................................7 2.1 Descriptions of Test Mode ...................................................................................................................................... 7 2.2 Connection Diagram of Test System ...................................................................................................................... 8 2.3 Table for Supporting Units ...................................................................................................................................... 9 2.4 EUT Operation Test Setup ..................................................................................................................................... 9 3. Test Results .................................................................................................................................................. 10 3.1 AC Power Line Conducted Emissions Measurement ........................................................................................... 10 3.2 20dB and 99% OBW Spectrum Bandwidth Measurement.................................................................................... 12 3.3 Frequency Stability Measurement ........................................................................................................................ 13 3.4 Field Strength of Fundamental Emissions and Mask Measurement ..................................................................... 14 3.5 Radiated Emissions Measurement ....................................................................................................................... 16 3.6 Antenna Requirements ......................................................................................................................................... 19 4. List of Measuring Equipment ...................................................................................................................... 20 5. Uncertainty of Evaluation ............................................................................................................................ 21 Appendix A. Test Results of Conducted Emission Test Appendix B. Test Results of Conducted Test Items B1. Test Result of 20dB Spectrum Bandwidth B2. Test Result of Frequency Stability Appendix C. Test Results of Radiated Test Items C1. Test Result of Field Strength of Fundamental Emissions C2. Results of Radiated Emissions (9 kHz~30MHz) C3. Results of Radiated Emissions (30MHz~1GHz) Appendix D. Setup Photographs TEL : 886-3-327-3456 Page Number : 2 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D History of this test report Report No. Version Description Issued Date FR911633D 01 Initial issue of report Jun. 25, 2019 TEL : 886-3-327-3456 Page Number : 3 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D Summary of Test Result Report Ref Std. Result Test Items Remark Clause Clause (PASS/FAIL) Under limit 3.1 15.207 AC Power Line Conducted Emissions Pass 7.73 dB at 13.560MHz 15.215(c) 20dB Spectrum Bandwidth Pass - 3.2 2.1049 99% OBW Spectrum Bandwidth Reporting only - 3.3 15.225(e) Frequency Stability Pass - Max level 3.4 15.225(a)(b)(c) Field Strength of Fundamental Emissions Pass 20.66 dBμV/m at 13.560 MHz Under limit 15.225(d) 3.5 Radiated Spurious Emissions Pass 11.35 dB at 15.209 950.530MHz 3.6 15.203 Antenna Requirements Pass - Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Reviewed by: Wii Chang Report Producer: Ann Lee TEL : 886-3-327-3456 Page Number : 4 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D 1. General Description 1.1 Product Feature of Equipment Under Test Product Feature Equipment Tablet Brand Name Zebra Model Name ET51CE FCC ID UZ7ET51CE NFC WLAN 11a/b/g/n HT20/HT40 EUT supports Radios application WLAN 11ac VHT20/VHT40/VHT80 Bluetooth BR/EDR/LE HW Version DV1 SW Version Android version 8.1.0 FW Version 01-19-08.00-OG-U00-PLT MFD 19MAY01 EUT Stage Identical Prototype Remark: The above EUT's information was declared by manufacturer. Specification of Accessories Spare Standard Battery 24.13Wh Brand Name ZEBRA Model Name BT-000393 Supported Unit Used in Test Configuration and System Cradle (Dock) Brand Name Zebra Part Number CRD-ET5X-1SCG1 Adapter Brand Name Zebra Part Number PWRBGA12V50W0WW DC Cable Brand Name Zebra Part Number CBL-DC-388A1-01 1.2 Product Specification of Equipment Under Test Standards-related Product Specification Tx/Rx Frequency Range 13.553 ~ 13.567MHz Channel Number 1 20dBW 2.64 KHz 99%OBW 2.24 KHz Antenna Type Loop Antenna Type of Modulation ASK Remark: The above EUT's information was declared by manufacturer. 1.3 Modification of EUT No modifications are made to the EUT during all test items. TEL : 886-3-327-3456 Page Number : 5 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

somov «. _FCC RADIO TEST REPORT Report No. : FR911633D 1.4 Testing Location Test Site SPORTON INTERNATIONAL INC. No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.0.C.) Test Site Location TEL: +886—3—327—3456 FAX: +886—3—328—4978 Sporton Site No. Test Site No. THO3—HY COO5—HY Test Engineer Benjamin Lin Eric Jeng Temperature 22~24°C 22~25C Relative Humidity 53~55% 52~55% Note: The test site complies with ANSI C63.4 2014 requirement. Test Site SPORTON INTERNATIONAL INC. No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City, Taiwan (R.0.C.) Test Site Location TEL: +886—3—327—0868 FAX: +886—3—327—0855 Sporton Site No. Test Site No. 03CH11—HY Test Engineer Hao Shu Temperature 21~26°C Relative Humidity 52~57% Note: The test site complies with ANSI C63.4 2014 requirement. FCC designation No.: TW1190 and TWO007 1.5 Applicable Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: + FCC Part 15 Subpart C §15.225 + FCC KDB 414788 DO1 Radiated Test Site v01r01 + ANSI €63.10—2013 TEL : 886—3—327—3456 Page Number : 6 of 21 FAX : 886—3—328—4978 Issued Date : Jun. 25, 2019 Report Template No.: BUS—FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D 2. Test Configuration of Equipment Under Test 2.1 Descriptions of Test Mode Investigation has been done on all the possible configurations. The following table is a list of the test modes shown in this test report. Test Items AC Power Line Conducted Emissions Field Strength of Fundamental Emissions 20dB Spectrum Bandwidth Frequency Stability Radiated Emissions 9kHz~30MHz Radiated Emissions 30MHz~1GHz The EUT pre-scanned in four NFC type, A, B, F, V. The worst type (type F) was recorded in this report. Pre-scanned tests, X, Y, Z in three orthogonal panels to determine the final configuration (Z plane as worst plane) from all possible combinations. Test Cases Mode 1 : WLAN Idle + USB Cable (Type C) + USB (Type C) with LCD Monitor + AC AC Adaptor (PWRBGA12V50W0WW) with DC Cable (CBL-DC-388A1-01) + Conducted Dock (CRD-ET5X-1SCG1) (Charging with EUT) + MPEG4 (Color Bar) + Emission NFC Link + SD Card (Load) TEL : 886-3-327-3456 Page Number : 7 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D 2.2 Connection Diagram of Test System <Radiated Emission Mode> <AC Conducted Emission Mode> TEL : 886-3-327-3456 Page Number : 8 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D 2.3 Table for Supporting Units Item Equipment Trade Name Model Name FCC ID Data Cable Power Cord Bluetooth 1. Sony Ericsson MW600 PY7DDA-2029 N/A N/A Earphone 2. WLAN AP ASUS RT-AC66U MSQ-RTAC66U N/A Unshielded, 1.8 m AC I/P: FCC DoC/ Latitude Unshielded, 1.2 m 3. Notebook DELL Contains FCC ID: N/A E6320 DC O/P: QDS-BRCM1054 Shielded, 1.8 m 4. LCD Monitor DELL P2715Qt FCC DoC Shielded, 1.6m Unshielded,1.8m 5. SD Card SanDisk MicroSD HC FCC DoC N/A N/A 6. NFC Card N/A N/A N/A N/A N/A 2.4 EUT Operation Test Setup The EUT was programmed to be in continuously transmitting mode. The ancillary equipment, NFC card, is used to make the EUT (NFC) continuously transmit at 13.56MHz and is placed around 0 cm gap to the EUT. TEL : 886-3-327-3456 Page Number : 9 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D 3. Test Results 3.1 AC Power Line Conducted Emissions Measurement 3.1.1 Limit of AC Conducted Emission For equipment that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits in the following table. Frequency of Emission Conducted Limit (dBμV) (MHz) Quasi-Peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 *Decreases with the logarithm of the frequency. 3.1.2 Measuring Instruments See list of measuring equipment of this test report. 3.1.3 Test Procedures 1. The EUT was placed 0.4 meter from the conducting wall of the shielding room, and it was kept at least 80 centimeters from any other grounded conducting surface. 2. Connect EUT to the power mains through a line impedance stabilization network (LISN). 3. All the support units are connecting to the other LISN. 4. The LISN provides 50 ohm coupling impedance for the measuring instrument. 5. The FCC states that a 50 ohm, 50 microhenry LISN should be used. 6. Both sides of AC line were checked for maximum conducted interference. 7. The frequency range from 150 kHz to 30 MHz was searched. 8. Set the test-receiver system to Peak Detect Function and specified bandwidth (IF Bandwidth = 9kHz) with Maximum Hold Mode. Then measurement is also conducted by Average Detector and Quasi-Peak Detector Function respectively. TEL : 886-3-327-3456 Page Number : 10 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D 3.1.4 Test setup 3.1.5 Test Result of AC Conducted Emission Please refer to Appendix A. TEL : 886-3-327-3456 Page Number : 11 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D 3.2 20dB and 99% OBW Spectrum Bandwidth Measurement 3.2.1 Limit Intentional radiators must be designed to ensure that the 20dB and 99% emission bandwidth in the specific band 13.553~13.567MHz. 3.2.2 Measuring Instruments See list of measuring instruments of this test report. 3.2.3 Test Procedures 1. The spectrum analyzer connected via a receive antenna placed near the EUT in peak Max hold mode. 2. The resolution bandwidth of 1 kHz and the video bandwidth of 3 kHz were used. 3. Measured the spectrum width with power higher than 20dB below carrier. 4. Measured the 99% OBW. 3.2.4 Test Setup 3.2.5 Test Result of Conducted Test Items Please refer to Appendix B. TEL : 886-3-327-3456 Page Number : 12 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D 3.3 Frequency Stability Measurement 3.3.1 Limit The frequency tolerance of the carrier signal shall be maintained within +/- 0.01% (100ppm) of the operating frequency over a temperature variation of -20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. 3.3.2 Measuring Instruments See list of measuring instruments of this test report. 3.3.3 Test Procedures 1. The spectrum analyzer connected via a receive antenna placed near the EUT. 2. EUT have transmitted signal and fixed channelize. 3. Set the spectrum analyzer span to view the entire emissions bandwidth. 4. Set RBW = 1 kHz, VBW = 3 kHz with peak detector and maxhold settings. 6 5. The fc is declaring of channel frequency. Then the frequency error formula is (fc-f)/fc × 10 ppm and the limit is less than ±100ppm. 6. Extreme temperature rule is -20°C~50°C. 3.3.4 Test Setup 3.3.5 Test Result of Conducted Test Items Please refer to Appendix B. TEL : 886-3-327-3456 Page Number : 13 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D 3.4 Field Strength of Fundamental Emissions and Mask Measurement 3.4.1 Limit Rules and specifications FCC CFR 47 Part 15 section 15.225 Description Compliance with the spectrum mask is tested with RBW set to 9kHz. Field Strength Field Strength Field Strength Field Strength Freq. of Emission (MHz) (μV/m) at 30m (dBμV/m) at 30m (dBμV/m) at 10m (dBμV/m) at 3m 1.705~13.110 30 29.5 48.58 69.5 13.110~13.410 106 40.5 59.58 80.5 13.410~13.553 334 50.5 69.58 90.5 13.553~13.567 15848 84.0 103.08 124.0 13.567~13.710 334 50.5 69.58 90.5 13.710~14.010 106 40.5 59.58 80.5 14.010~30.000 30 29.5 48.58 69.5 3.4.2 Measuring Instruments See list of measuring instruments of this test report. TEL : 886-3-327-3456 Page Number : 14 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D 3.4.3 Test Procedures 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the loop receiving antenna mounted antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the receiving antenna was fixed at one meter above ground to find the maximum emissions field strength. 4. For Fundamental emissions, use the receiver to measure QP reading. 5. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 6. Compliance with the spectrum mask is tested with RBW set to 9kHz. Note: Emission level (dBμV/m) = 20 log Emission level (μV/m). 3.4.4 Test Setup For radiated emissions below 30MHz 3.4.5 Test Result of Field Strength of Fundamental Emissions and Mask Please refer to Appendix C. TEL : 886-3-327-3456 Page Number : 15 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D 3.5 Radiated Emissions Measurement 3.5.1 Limit The field strength of any emissions which appear outside of 13.110 ~14.010MHz band shall not exceed the general radiated emissions limits. Frequencies Field Strength Measurement Distance (MHz) (μV/m) (meters) 0.009~0.490 2400/F(kHz) 300 0.490~1.705 24000/F(kHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 3.5.2 Measuring Instruments See list of measuring instruments of this test report. 3.5.3 Measuring Instrument Setting The following table is the setting of receiver: Receiver Parameter Setting Attenuation Auto Frequency Range: 9kHz~150kHz RBW 200Hz for QP Frequency Range: 150kHz~30MHz RBW 9kHz for QP Frequency Range: 30MHz~1000MHz RBW 120kHz for Peak Note: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90 kHz and 110-490 kHz. Radiated emission limits in these two bands are based on measurements employing an average detector. TEL : 886-3-327-3456 Page Number : 16 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D 3.5.4 Test Procedures 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 6. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 7. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the recorded data should be QP measured by receiver. TEL : 886-3-327-3456 Page Number : 17 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D 3.5.5 Test Setup For radiated emissions below 30MHz For radiated emissions above 30MHz 3.5.6 Test Result of Radiated Emissions Measurement Please refer to Appendix C. Remark: There is a comparison data of both open-field test site and alternative test site - semi-Anechoic chamber according to 414788 D01 Radiated Test Site v01r01, and the result came out very similar. TEL : 886-3-327-3456 Page Number : 18 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D 3.6 Antenna Requirements 3.6.1 Standard Applicable Except for special regulations, the Low-power Radio-frequency Devices must not be equipped with any jacket for installing an antenna with extension cable. An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that the user can replace a broken antenna, but the use of a standard antenna jack or electrical connector is prohibited. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the rule. 3.6.2 Antenna Anti-Replacement Construction An embedded-in antenna design is used. TEL : 886-3-327-3456 Page Number : 19 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

somov «. _FCC RADIO TEST REPORT Report No. : FR911633D 4. List of Measuring Equipment . 20. Calibration Instrument Manufacturer Model No. Serial No.| Characteristics Date Test Date Due Date Remark AC Power Source| ChainTek APC—1000W N/A N/A N/A May 21, 2019 N/A Conduction Y 4* ({coos—Hy) . Rohde & Conduction EMI Test Receiver ESA3 102388 9KHz~3.6GHz Nov. 12, 2018 May 21, 2019 Nov. 11, 2019 Schwarz (GOO5—HY) Rohde & Conduction LISN ENV216 100080 9KHz~30MHz Nov. 14, 2018 May 21, 2019 Nov. 13, 2019 Schwarz (GOO5—HY) ducti LISN Rohde & ENV216 100081 9KHz~30MHz Nov. 09, 2018 May 21, 2019 Nov. 08, 2019 Conduction Schwarz (GOO5—HY) ducti Software Rohde & Schwarz EMCS2 V10.30 N/A N/A N/A May 21, 2019 N/A conduction (GOO5—HY) LF Cable HUBER + RG—214/U LFO1 N/A Dec. 31, 2018 May 21, 2019 Dec. 30, 2019 Conduction SUHNER CC Y 25 tC (COO5—HY) ducti Pulse Limiter Rohde & ESH3—Z2 100851 N/A Dec. 31, 2018 May 21, 2019 Dec. 30, 2019 Conduction Schwarz (GOO5—HY) Software Audix &3 AK—00104 N/A N/A May 21, 2019 N/A Radiation 6.2009—8—24 2 y 25 (0BCH11—HY) w Radiation Amplifier SONOMA 310N 187312 OkHz~1GHz Dec. 04, 2018 May 21, 2019 Dec. 03, 2019 (O3CHA11—HY) CBL 354148AT— Radiati Bilog Antenna TESEQ 6111D&N—6—0 30MHz~1GHz Oct. 13, 2018 May 21, 2019 Oct. 12, 2019 aciation 6 NO602 (O3CH11—HY) Spectrum . MY542004 Radiation Keysight N3010A 10Hz ~ 44GHz Oct. 19, 2018 May 21, 2019 Oct. 18, 2019 Analyzer 86 (O3CH11—HY) AM—BS—4500— Radiation Antenna Mast EMEC S N/A 1~4m N/A May 21, 2019 N/A B (O3CH11—HY) Radiation Turn Table EMEC TT 2000 N/A 0~360 Degree N/A May 21, 2019 N/A (O3CH11—HY) N9038A MY532900 Radiation EMI Test Receiver Keysight N/A Jan. 19, 2019 May 21, 2019 Jan. 18, 2020 (MXE) 45 (O3CH11—HY) Filter Wainwright wHK20/1000 SN2 20M High Pass Sep. 16, 2018 May 21, 2019 Sep. 15, 2019 Radiation 9 C7moss 9 P. !5 Y 25 P tS (O3CH11—HY) Radiati RF Cable HUBER + SucorLEx My9e374 9KHz—30MHz Mar. 14, 2018 May 21, 2019 Mar. 12, 2020 actation SUHNER 104 PE (O3CH11—HY) HUBER + SUCOFLEX MY9837/4 Radiation RF Cable 30M—18G Mar. 14, 2018 May 21, 2019 Mar. 12, 2020 SUHNER 104 PE (O3CH11—HY) Radiati RF Cable HUBER + SucorLEx MY2859/2 30MHz—40GHz Mar. 14, 2018 May 21, 2019 Mar. 12, 2020 actation SUHNER 102 (O3CH11—HY) Rohde & Radiation Loop Antenna HFH2—22 100488 9 kHz~30 MHz Jan. 07, 2019 May 21, 2019 Jan. 06, 2020 Schwarz (O3CH11—HY) F10407004 Conducted AC Power Source| AC POWER AFC—500W 1 50Hz~60Hz Apr. 12, 2019 Jun. 03, 2019 Apr. 11, 2020 (Thoshy) Spectrum Rohde & Conducted FSP30 101329 9kHz~30GHz Jun. 29, 2018 Jun. 03, 2019 Jun. 28, 2019 Analyzer Schwarz (THO3—HY) Temperature . . Conducted ESPEC SU—641 92013721 —30°C. ~70°C Nov. 28, 2018 Jun. 03, 2019 Nov. 27, 2019 Chamber (THO3—HY) TEL : 886—3—327—3456 Page Number : 20 of 21 FAX : 886—3—328—4978 Issued Date : Jun. 25, 2019 Report Template No.: BUS—FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR911633D 5. Uncertainty of Evaluation Uncertainty of Conducted Emission Measurement (150 kHz ~ 30 MHz) Measuring Uncertainty for a Level of Confidence 2.2 of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (9 kHz ~ 30 MHz) Measuring Uncertainty for a Level of Confidence 3.45 of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (30 MHz ~ 1000 MHz) Measuring Uncertainty for a Level of Confidence 5.2 of 95% (U = 2Uc(y)) TEL : 886-3-327-3456 Page Number : 21 of 21 FAX : 886-3-328-4978 Issued Date : Jun. 25, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

seonton cas. FCC RADIO TEST REPORT Report No. : FR911633D Appendix A. Test Results of Conducted Emission Test . L Temperature : 22~25C Test Engineer : |Eric Jeng — —— Relative Humidity : (52~55% Test Voltage : |120Vac / 60Hz Phase : Line 100r 90+ 807 707 "s PB_OP i1 Mamn P brts % 60 [ C — mamy ® . 5 50+ — qL &1 Mlagn Plorls & 2 aot —® |* * 307 + * * L s + s 207 * ¢ 10f 0 150k 30040000 8001M 2M 3M 4M5M6 8 10M 20M 30M Frequency in Hz Final Result Frequency QuasiPeak CAverage Limit Margin Line Filter Cort. (MHz) (dBuV) (dBuV) (dBuV) (dB) (dB) 0.165750 ~— 34.65 55.17 20.52 L1 OFF 19.5 0.165750 48.89 ~> 65.17 16.28 L1 OFF 19.5 0.208500 ~— 26.59 53.27 26.68 L1 OFF 19.5 0.208500 41.01 ~— 63.27 22.26 L1 OFF 19.5 0.396750 ~—— 21.40 49.28 27.88 L1 OFF 19.5 0.396750 33.52 ~— 59.28 25.76 L1 OFF 19.5 0.417750 ~—— 22.77 47.49 24.72 L1 OFF 19.5 0.417750 32.46 ~> 57.49 25.03 L1 OFF 19.5 0.586500 ~— 16.45 46.00 290.55 L1 OFF 19.5 0.586500 23.99 ~> 56.00 32.67 L1 OFF 19.5 7.689750 ~— 24.73 50.00 25.27 L1 OFF 19.7 7.689750 30.13 ~> 60.00 29.87 L1 OFF 19.7 13.560000 ~— 42.48 50.00 7.52 L1 OFF 19.7 13.560000 43.16 ~— 60.00 16.84 L1 OFF 19.7 TEL : 886—3—327—3456 Page Number : A1 of AZ FAX : 886—3—328—4978

somov «. _FCC RADIO TEST REPORT Report No. : FR911633D Temperature : 22~25C Test Engineer : |Eric Jeng Relative Humidity : (52~55% Test Voltage : |120Vac / 60Hz Phase : Neutral 100r 907 807 70¢ Majin P brts 604 Level in dBuV 504 j {ajin Plorts 407 ++ 307 207 10f 0 150k 30040000 8001M 2M 3M 4M5M6 8 10M 20M 30M Frequency in Hz Final Result Frequency QuasiPeak CAverage Limit Margin Line Filter Cort. (MHz) (dBuy) (dBuy) (dBuVv) (dB) (dB) 0.161250 ~—— 34.83 55.40 20.57 N OFF 19.5 0.161250 49.98 ~— 65.40 16.02 N OFF 19.5 0.197250 ~—— 24.07 53.73 29.66 N OFF 19.5 0.197250 40.39 ~— 63.73 23.94 N OFF 19.5 0.244500 ~—— 28.11 51.94 28.83 N OFF 19.5 0.244500 36.77 ~> 61.94 25.17 N OFF 19.5 0.438000 ~— 20.44 47.10 26.66 N OFF 19.5 0.438000 29.07 ~> 57.10 28.03 N OFF 19.5 0.498750 ~— 21.19 46.02 24.83 N OFF 19.5 0.498750 26.71 ~> 56.02 29.91 N OFF 19.5 7.876500 ~—— 26.92 50.00 23.08 N OFF 19.7 7.876500 31.53 ~> 60.00 28.47 N OFF 19.7 13.560000 ~—— 42.63 50.00 7.97 N OFF 19.8 13.560000 43.17 ~— 60.00 16.83 N OFF 19.8 TEL : 886—3—327—3456 Page Number : AZ of AZ FAX : 886—3—328—4978

FCC RADIO TEST REPORT Report No. : FR911633D Appendix B. Test Results of Conducted Test Items B1. Test Result of 20dB Spectrum Bandwidth Test mode NFC Tx Test Frequency (MHz) 13.56 * RBW 1 kHz Marker 1 [T1 ] * RBW 1 kHz Marker 1 [T1 ] * VBW 3 kHz -7.82 dBm * VBW 3 kHz -7.53 dBm Ref 10 dBm * Att 30 dB * SWT 20 ms 13.560080000 MHz Ref 10 dBm * Att 30 dB * SWT 20 ms 13.560100000 MHz 10 ndB [T1] 20.00 dB 10 OBW 2.240000000 kHz BW 2.640000000 kHz Temp 1 [T1 OBW] Temp 1 [T1 ndB] A -22.10 dBm A 0 0 -27.54 dBm 1 13.558940000 MHz 1 1 AP 1 AP 13.558740000 MHz Temp 2 [T1 OBW] VIEW VIEW -10 Temp 2 [T1 ndB] -10 -22.11 dBm -27.83 dBm 13.561180000 MHz 13.561380000 MHz T1 T2 -20 -20 T1 T2 -30 -30 -40 -40 3DB 3DB -50 -50 -60 -60 -70 -70 -80 -80 -90 -90 Center 13.56 MHz 1 kHz/ Span 10 kHz Center 13.56 MHz 1 kHz/ Span 10 kHz Date: 3.JUN.2019 14:37:13 Date: 3.JUN.2019 14:38:58 20dB Bandwidth (kHz) 2.640 99% OccupiedBW(kHz) 2.240 fL＞13.553 13.55874 Test Result Frequency range (MHz) fH＜13.567 13.56138 Complies Remark: Because the measured signal is CW adjusting the RBW per C63.10 would not be practical since measured bandwidth will always follow the RBW and the result will be approximately twice the RBW. TEL : 886-3-327-3456 Page Number : B1 of B3 FAX : 886-3-328-4978

somov «. _FCC RADIO TEST REPORT Report No. : FR911633D B2. Test Result of Frequency Stability B3. Voltage vs. Frequency Stability Temperature vs. Frequency Stability Voltage (Vac) Measurement Temperature (°C) Time Measurement Frequency (MHz) Frequency (MHz) 120 13.560050 —20 0 13.560060 102 13.560060 2 13.560060 138 13.560060 5 13.560060 10 13.560060 —10 0 13.560060 2 13.560060 5 13.560060 10 13.560060 0 0 13.560060 2 13.560060 5 13.560060 10 13.560060 10 0 13.560060 2 13.560060 5 13.560060 10 13.560060 20 0 13.560060 2 13.560060 5 13.560060 10 13.560060 30 0 13.560060 2 13.560060 5 13.560060 10 13.560060 40 0 13.560060 2 13.560060 5 13.560060 10 13.560060 TEL : 886—3—327—3456 Page Number : B2 of B3 FAX : 886—3—328—4978

seonton cas. FCC RADIO TEST REPORT Report No. : FR911633D Voltage vs. Frequency Stability Temperature vs. Frequency Stability Voltage (Vac) Measurement Temperature (C) aine Measurement Frequency (MHz) Frequency (MHz) 50 0 13.560060 2 13.560060 5 13.560060 10 13.560060 Max.Deviation (MHz) 0.000060 Max.Deviation (MHz) 0.000060 Max.Deviation (ppm) 44248 Max.Deviation (ppm) 4.4248 Limit FS < £100 ppm Limit FS < £100 ppm Test Result PASS Test Result PASS TEL : 886—3—327—3456 Page Number : B3 of B3 FAX : 886—3—328—4978

FCC RADIO TEST REPORT Report No. : FR911633D Appendix C. Test Results of Radiated Test Items C1. Test Result of Field Strength of Fundamental Emissions Test Mode : NFC Tx Test Frequency (MHz) 13.56 TEL : 886-3-327-3456 Page Number : C1 of C5 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR911633D C2. Results of Radiated Spurious Emissions (9 kHz~30MHz) Test Mode : NFC Tx Polarization : Horizontal Frequency Level Over Limit Read Antenna Cable Ant Table Remark Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 0.0192 2.3 -39.64 41.94 62.51 19.78 0.01 - - Average 0.06249 -21.15 -52.84 31.69 39.59 19.25 0.01 - - Average 0.0938 -25.12 -53.28 28.16 35.75 19.12 0.01 - - QP 0.14068 -25.83 -50.47 24.64 35.1 19.06 0.01 - - Average 0.15782 -23.84 -47.48 23.64 37.11 19.04 0.01 - - Average 0.81293 8.33 -21.07 29.4 29.13 19.19 0.01 100 0 QP 13.56 20.59 -8.91 29.5 39.27 21.18 0.14 - - QP 15.688 -2.02 -31.52 29.5 16.47 21.36 0.15 - - QP 18.619 -2.11 -31.61 29.5 16.14 21.59 0.16 - - QP 27.02 -1.61 -31.11 29.5 16.43 21.77 0.19 - - QP TEL : 886-3-327-3456 Page Number : C2 of C5 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR911633D Test Mode : NFC Tx Polarization : Vertical Frequency Level Over Limit Read Antenna Cable Ant Table Remark Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 0.01925 1.86 -40.06 41.92 62.07 19.78 0.01 - - Average 0.06249 -30.3 -61.99 31.69 30.44 19.25 0.01 - - Average 0.09378 -33.34 -61.5 28.16 27.53 19.12 0.01 - - QP 0.14068 -33.79 -58.43 24.64 27.14 19.06 0.01 - - Average 0.15544 -27.94 -51.71 23.77 33.01 19.04 0.01 - - Average 1.316 5.74 -19.48 25.22 26.43 19.3 0.01 100 0 QP 8.552 1.49 -28.01 29.5 20.85 20.52 0.12 - - QP 13.56 16.31 -13.19 29.5 34.99 21.18 0.14 - - QP 18.88 -0.65 -30.15 29.5 17.57 21.61 0.17 - - QP 25.66 -2.23 -31.73 29.5 15.82 21.76 0.19 - - QP Note: 1. 13.56 MHz is fundamental signal which can be ignored. 2. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 3. Distance extrapolation factor = 40 log (specific distance / test distance) (dB); 4. Limit line = specific limits (dBμV) + distance extrapolation factor. TEL : 886-3-327-3456 Page Number : C3 of C5 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR911633D C3. Results of Radiated Spurious Emissions (30MHz~1GHz) Test Mode : NFC Tx Polarization : Horizontal Frequency Level Over Limit Read Antenna Cable Preamp Ant Table Remark Limit Line Level Factor Loss Factor Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( dB ) ( cm ) ( deg ) 31.94 21.39 -18.61 40 29.67 23.16 0.78 32.37 - - Peak 40.68 20.75 -19.25 40 33.48 18.7 0.84 32.37 - - Peak 81.36 14.22 -25.78 40 32 13.24 1.19 32.34 - - Peak 133.79 16.26 -27.24 43.5 29.69 17.25 1.51 32.29 - - Peak 559.62 27.77 -18.23 46 30.45 26.05 3.13 32.19 - - Peak 956.35 33.99 -12.01 46 28.6 30.85 4.13 30.83 100 0 Peak TEL : 886-3-327-3456 Page Number : C4 of C5 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR911633D Test Mode : NFC Tx Polarization : Vertical Frequency Level Over Limit Read Antenna Cable Preamp Ant Table Remark Limit Line Level Factor Loss Factor Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( dB ) ( cm ) ( deg ) 35.82 27.94 -12.06 40 38.02 21.35 0.81 32.37 - - Peak 40.68 26.49 -13.51 40 39.22 18.7 0.84 32.37 - - Peak 54.24 20.77 -19.23 40 39.79 12.32 0.96 32.37 - - Peak 67.8 18.64 -21.36 40 37.98 11.83 1.08 32.35 - - Peak 81.36 23.11 -16.89 40 40.89 13.24 1.19 32.34 - - Peak 950.53 34.65 -11.35 46 29.67 30.6 4.12 30.89 100 0 Peak Note: 1. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 2. Emission level (dBμV/m) = 20 log Emission level (μV/m). 3. Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor= Level. TEL : 886-3-327-3456 Page Number : C5 of C5 FAX : 886-3-328-4978


Document Created: 2019-06-27 21:05:39
Document Modified: 2019-06-27 21:05:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC