RF Exposure Co-Loacation Report

FCC ID: UZ7211486030B

RF Exposure Info

Download: PDF
FCCID_1675788

Supplemental “Transmit Simultaneously” Test Report REPORT NO.: RF111028C08A-3 MODEL NO.: 21-148603-0B FCC ID: UZ7211486030B RECEIVED: Oct. 28, 2011 TESTED: Nov. 25 to 30, 2011 ISSUED: Mar. 09, 2012 APPLICANT: Motorola Solutions, Inc. ADDRESS: 1 Motorola Plaza, Holtsville, NY 11742-1300 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 23 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF111028C08A-3 1 Report Format Version 4.0.0 Reference No.:111125C10

Table of Contents RELEASE CONTROL RECORD .................................................................................................... 3 1. CERTIFICATION ............................................................................................................... 4 2. SUMMARY OF TEST RESULTS........................................................................................ 5 2.1 MEASUREMENT UNCERTAINTY ..................................................................................... 5 3. GENERAL INFORMATION ................................................................................................ 6 3.1 GENERAL DESCRIPTION OF EUT................................................................................... 6 3.2 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL:....................................... 8 3.3 DESCRIPTION OF SUPPORT UNITS ............................................................................... 9 3.4 CONFIGURATION OF SYSTEM UNDER TEST............................................................... 10 4. TEST TYPES AND RESULTS.......................................................................................... 11 4.1 CONDUCTED EMISSION MEASUREMENT.................................................................... 11 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT.................................................. 11 4.1.2 TEST INSTRUMENTS..................................................................................................... 11 4.1.3 TEST PROCEDURES ..................................................................................................... 12 4.1.4 DEVIATION FROM TEST STANDARD............................................................................. 12 4.1.5 TEST SETUP .................................................................................................................. 13 4.1.6 EUT OPERATING CONDITIONS..................................................................................... 13 4.1.7 TEST RESULTS .............................................................................................................. 14 4.2 RADIATED EMISSION MEASUREMENT......................................................................... 16 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT....................................................... 16 4.2.2 TEST INSTRUMENTS..................................................................................................... 17 4.2.3 TEST PROCEDURES ..................................................................................................... 19 4.2.4 DEVIATION FROM TEST STANDARD............................................................................. 19 4.2.5 TEST SETUP .................................................................................................................. 20 4.2.6 EUT OPERATING CONDITIONS..................................................................................... 20 4.2.7 TEST RESULTS .............................................................................................................. 21 4. INFORMATION ON THE TESTING LABORATORIES............................................................... 23 Report No.: RF111028C08A-3 2 Report Format Version 4.0.0 Reference No.:111125C10

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF111028C08A-3 Original release Mar. 09, 2012 Report No.: RF111028C08A-3 3 Report Format Version 4.0.0 Reference No.:111125C10

1. CERTIFICATION PRODUCT : Radio Module BRAND NAME : Motorola MODEL NO. : 21-148603-0B TEST ITEM: ENGINEERING SAMPLE APPLICANT : Motorola Solutions, Inc. TESTED: Nov. 25 to 30, 2011 STANDARDS : FCC Part 15, Subpart C (Section 15.247) ANSI C63.4-2003 ANSI C63.10-2009 The above equipment (Model: 21-148603-0B) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Mar. 09, 2012 ( Midoli Peng, Specialist ) APPROVED BY : , DATE: Mar. 09, 2012 ( May Chen, Deputy Manager ) Report No.: RF111028C08A-3 4 Report Format Version 4.0.0 Reference No.:111125C10

2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: 47 CFR Part 15, Subpart C Standard Test Type and Limit Result Remark Section Meet the requirement of limit Minimum passing 15.207 AC Power Conducted Emission PASS margin is -17.79 dB at 7.168MHz Meet the requirement of Radiated Emissions limit Minimum passing 15.247(d) PASS Limit: Table 15.209 margin is -4.6 dB at 40.78MHz 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Value Conducted emissions 2.45 dB Radiated emissions (30MHz-1GHz) 3.89 dB Radiated emissions (1GHz -18GHz) 2.19 dB Radiated emissions (18GHz -40GHz) 2.56 dB Report No.: RF111028C08A-3 5 Report Format Version 4.0.0 Reference No.:111125C10

3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT Radio Module MODEL NO. 21-148603-0B FCC ID UZ7211486030B POWER SUPPLY DC 3.3V CCK, DQPSK, DBPSK for DSSS MODULATION TYPE 64QAM, 16QAM, QPSK, BPSK for OFDM MODULATION DSSS, OFDM TECHNOLOGY 802.11b: up to11Mbps 802.11g: up to 54Mbps TRANSFER RATE 802.11n (20MHz, 800ns GI): up to 72.2Mbps 802.11n (20MHz, 400ns GI): up to 65Mbps For 15.407 802.11a: 5.18 ~ 5.24GHz, 5.26 ~ 5.32GHz, 5.5~5.58GHz & OPERATING 5.66~5.7GHz FREQUENCY For 15.247 802.11b & 802.11g: 2.412 ~ 2.472GHz 802.11a: 5.745 ~ 5.825GHz For 15.407 16 for 802.11a, 802.11n (20MHz) NUMBER OF CHANNEL For 15.247(2.4GHz) 13 for 802.11b, 802.11g, 802.11n (20MHz) For 15.247(5GHz) 5 for 802.11a, 802.11n (20MHz) For 15.407 802.11a: 102.3mW 802.11n (20MHz): 89.1mW For 15.247(2.4GHz) MAXIMUM OUTPUT 802.11b: 208.9mW POWER 802.11g: 257.0mW 802.11n (20MHz): 251.2mW For 15.247(5GHz) 802.11a: 158.5mW 802.11n (20MHz): 154.9mW ANTENNA TYPE Please see note Report No.: RF111028C08A-3 6 Report Format Version 4.0.0 Reference No.:111125C10

DATA CABLE NA I/O PORTS NA ASSOCIATED DEVICES NA NOTE: 1. There are Bluetooth technology, GPS technology and WLAN technology used for the EUT and the functions of EUT listed as below table: Function Report No. RF111028C08A (FCC Part15C) WLAN RF111028C08A-1(FCC Part15E) Bluetooth RF111028C08A-2 2. The antennas provided to the EUT, please refer to the following table: Peak Cable loss Net Peak No. Type Connector Model Trace Gain (dBi) (dB) Gain (dBi) Reverse ML-2452-APA2-01 2.4GHz : 3 2.4GHz : 0.75 2.4GHz : 2.25 1 Dipole-1 WiFi SMA Rev C 5GHz : 5 5GHz : 1.3 5GHz : 3.7 Reverse 2 Dipole-2 C492-510032-A 1.8 2.35 -0.55 BT SMA Reverse 3 Chip NA - - GPS SMA 3. The EUT was included two SKU, which are identical to each other in all aspects except for the following table: P/N Description SKU #1 21-148603-02 Diversity version with WLAN and BT on SEPARATE RF paths SKU #2 21-148603-04 NON-Diversity version with WLAN and BT on SEPARATE RF paths SKU #1, the worse case one, was chosen for final test. 4. The device can transmit simultaneously on WLAN (5GHz) mode and Bluetooth mode; other modes can't support simultaneously ability. This report was recorded the device transmit simultaneously test data. 5. The EUT is 1 * 1 spatial SISO (1Tx & 1Rx) without beam forming function. 6. The above EUT information was declared by the manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's manual. Report No.: RF111028C08A-3 7 Report Format Version 4.0.0 Reference No.:111125C10

3.2 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL: EUT Applicable to configure Description mode PLC RE<1G RE≥1G - √ √ √ Where PLC: Power Line Conducted Emission RE<1G RE: Radiated Emission below 1GHz RE≥1G: Radiated Emission above 1GHz APCM: Antenna Port Conducted Measurement Note1: Pre-Scan has been conducted to determine the worst case mode from antenna power. Note2: The worst card was found in U727 (Channel Frequency: 1880MHz). POWER LINE CONDUCTED EMISSION TEST:  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. Available Tested Modulation Modulation Data Rate Mode Channel Channel Technology Type (Mbps) 5 GHz 149 to 165 157 OFDM BPSK 6 802.11a + Bluetooth 0 to 78 0 FHSS 8DPSK - RADIATED EMISSION TEST:  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. Available Tested Modulation Modulation Data Rate Mode Channel Channel Technology Type (Mbps) 5 GHz 149 to 165 157 OFDM BPSK 6 802.11a + Bluetooth 0 to 78 0 FHSS 8DPSK - TEST CONDITION: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY PLC 26deg. C, 72%RH 120Vac, 60Hz(system) Andy Ho RE<1G 18deg. C, 64%RH DC 3.3V Nick Chang RE≥1G 19deg. C, 66%RH DC 3.3V Kent Liu Report No.: RF111028C08A-3 8 Report Format Version 4.0.0 Reference No.:111125C10

3.3 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. Product Brand Model No. Serial No. FCC ID NOTEBOOK 1 DELL PP32LA FSLB32S FCC DoC COMPUTER DC POWER 2 Topward 6603D 795558 NA SUPPLY No. Signal cable description 1 USB cable (1.8m with one core) 2 DC line (2m) Note: 1. All power cords of the above support units are unshielded (1.8m). Report No.: RF111028C08A-3 9 Report Format Version 4.0.0 Reference No.:111125C10

3.4 CONFIGURATION OF SYSTEM UNDER TEST For Conducted Emission test: DC line (2m) USB cable (1.8m) 2. DC POWER EUT 1. NOTEBOOK SUPPLY COMPUTER TEST TABLE For other test items: DC line (2m) USB cable (1.8m) 2. DC POWER EUT 1. NOTEBOOK SUPPLY COMPUTER (Under test table) TEST TABLE Report No.: RF111028C08A-3 10 Report Format Version 4.0.0 Reference No.:111125C10

4. TEST TYPES AND RESULTS 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) CONDUCTED LIMIT (dBµV) Quasi-peak Average 0.15-0.5 66 to 56 56 to 46 0.5-5 56 46 5-30 60 50 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 3. All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. 4.1.2 TEST INSTRUMENTS Test date: Nov. 15, 2011 DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver ESCS 30 100375 Mar. 09, 2011 Mar. 08, 2012 Line-Impedance Stabilization Network NSLK8127 8127-522 Sep. 07, 2011 Sep. 06, 2012 (for EUT) Line-Impedance Stabilization Network ESH3-Z5 848773/004 Nov. 01, 2011 Oct. 31, 2012 (for Peripheral) RF Cable (JYEBAO) 5DFB COCCAB-002 Aug. 29, 2011 Aug. 28, 2012 50 ohms Terminator 50 3 Nov. 02, 2011 Nov. 01, 2012 BV Software NA NA NA ADT_Cond_V7.3.7 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. C. 3 The VCCI Con C Registration No. is C-3611. Report No.: RF111028C08A-3 11 Report Format Version 4.0.0 Reference No.:111125C10

4.1.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) were not recorded. 4.1.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF111028C08A-3 12 Report Format Version 4.0.0 Reference No.:111125C10

4.1.5 TEST SETUP V e r tic a l G r o u n d R e f e r e n c e P la n e T e s t R e c e iv e r EUT 40cm 80cm L IS N H o r iz o n t a l G r o u n d R e fe r e n c e P la n e N o t e : 1 .S u p p o r t u n its w e r e c o n n e c te d to s e c o n d L IS N . 2 .B o t h o f L IS N s (A M N ) a r e 8 0 c m fr o m E U T a n d a t le a s t 8 0 fr o m o th e r u n its a n d o th e r m e ta l p la n e s For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 4.1.6 EUT OPERATING CONDITIONS 1. Connect the EUT with the support unit 1 (Notebook Computer) which is placed on a testing table. 2. The communication partner run test program “RTTT.exe” to enable EUT under transmission/receiving condition continuously at specific channel frequency. Report No.: RF111028C08A-3 13 Report Format Version 4.0.0 Reference No.:111125C10

4.1.7 TEST RESULTS PHASE Line (L) 6dB BANDWIDTH 9 kHz Reading Emission Freq. Corr. Limit Margin Value Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.459 0.11 9.81 -5.24 9.92 -5.13 56.72 46.72 -46.79 -51.84 2 2.594 0.24 20.75 11.14 20.99 11.38 56.00 46.00 -35.01 -34.62 3 5.391 0.37 33.67 25.82 34.04 26.19 60.00 50.00 -25.96 -23.81 4 7.168 0.44 34.47 31.74 34.91 32.18 60.00 50.00 -25.09 -17.82 5 9.895 0.55 29.03 25.14 29.58 25.69 60.00 50.00 -30.42 -24.31 6 24.000 0.86 23.56 22.61 24.42 23.47 60.00 50.00 -35.58 -26.53 REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF111028C08A-3 14 Report Format Version 4.0.0 Reference No.:111125C10

PHASE Neutral (N) 6dB BANDWIDTH 9 kHz Reading Emission Freq. Corr. Limit Margin Value Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.384 0.11 9.90 -6.32 10.01 -6.21 58.18 48.18 -48.18 -54.40 2 3.645 0.23 19.22 10.59 19.45 10.82 56.00 46.00 -36.55 -35.18 3 5.242 0.28 34.87 26.45 35.15 26.73 60.00 50.00 -24.85 -23.27 4 7.168 0.33 34.37 31.88 34.70 32.21 60.00 50.00 -25.30 -17.79 5 9.895 0.41 28.13 24.12 28.54 24.53 60.00 50.00 -31.46 -25.47 6 24.000 0.75 28.76 27.88 29.51 28.63 60.00 50.00 -30.49 -21.37 REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF111028C08A-3 15 Report Format Version 4.0.0 Reference No.:111125C10

4.2 RADIATED EMISSION MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT Emissions radiated outside of the specified bands, shall be according to the general radiated limits in 15.209 as following: Frequencies Field strength Measurement distance (MHz) (microvolts/meter) (meters) 0.009-0.490 2400/F(kHz) 300 0.490-1.705 24000/F(kHz) 30 1.705-30.0 30 30 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. 4. Section 15.205 restricted bands of operation shall compliance with the limits in Section 15.209. Report No.: RF111028C08A-3 16 Report Format Version 4.0.0 Reference No.:111125C10

4.2.2 TEST INSTRUMENTS For below 1GHz: Test date: Nov. 26, 2011 DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Agilent E4446A MY48250253 Aug. 29, 2011 Aug. 28, 2012 Spectrum Analyzer Agilent N9039A MY46520310 Aug. 29, 2011 Aug. 28, 2012 Pre-Selector Agilent N5181A MY49060347 July 25, 2011 July 24, 2012 Signal Generator Mini-Circuits ZFL-1000VH2B AMP-ZFL-04 Nov. 15, 2011 Nov. 14, 2012 Pre-Amplifier Agilent Pre-Amplifier 8449B 3008A02465 Feb. 28, 2011 Feb. 27, 2012 SPACEK LABS SLKKa-48-6 9K16 Nov. 15, 2011 Nov. 14, 2012 SCHWARZBECK VULB 9168 9168-361 Apr. 14, 2011 Apr. 13, 2012 Trilog Broadband Antenna AISI AIH.8018 0000220091110 Nov. 22, 2011 Nov. 21, 2012 Horn_Antenna SCHWARZBECK BBHA 9170 9170-424 Oct. 07, 2011 Oct. 06, 2012 Horn_Antenna RF104-205 RF CABLE NA RF104-207 Dec. 28, 2010 Dec. 27, 2011 RF104-202 RF Cable NA CHHCAB_001 Oct. 08, 2011 Oct. 07, 2012 ADT_Radiated_ Software NA NA NA V8.7.05 CT Antenna Tower & NA NA NA NA Turn Table Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in 966 Chamber No. H. 4. The FCC Site Registration No. is 797305. 5. The CANADA Site Registration No. is IC 7450H-3. Report No.: RF111028C08A-3 17 Report Format Version 4.0.0 Reference No.:111125C10

For above 1GHz: Test date: Nov. 30, 2011 DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Agilent E4446A MY48250254 July 12, 2011 July 11, 2012 Spectrum Analyzer Agilent N9039A MY46520311 July 12, 2011 July 11, 2012 Pre-Selector Agilent N5181A MY49060517 July 12, 2011 July 11, 2012 Signal Generator Mini-Circuits ZFL-1000VH2B AMP-ZFL-03 Nov. 15, 2011 Nov. 14, 2012 Pre-Amplifier Agilent Pre-Amplifier 8449B 3008A02578 July 04, 2011 July 03, 2012 SPACEK LABS SLKKa-48-6 9K16 Nov. 15, 2011 Nov. 14, 2012 SCHWARZBECK VULB 9168 9168-360 Apr. 14, 2011 Apr. 13, 2012 Trilog Broadband Antenna AISI AIH.8018 0000320091110 Nov. 14, 2011 Nov. 13, 2012 Horn_Antenna SCHWARZBECK BBHA 9170 9170-424 Oct. 07, 2011 Oct. 06, 2012 Horn_Antenna RF104-201 RF CABLE NA RF104-203 Dec. 27, 2010 Dec. 26, 2011 RF104-204 RF Cable NA CHGCAB_001 Oct. 07, 2011 Oct. 06, 2012 ADT_Radiated_ Software NA NA NA V8.7.05 CT Antenna Tower & NA NA NA NA Turn Table Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in 966 Chamber No. G. 4. The FCC Site Registration No. is 966073. 5. The VCCI Site Registration No. is G-137. 6. The CANADA Site Registration No. is IC 7450H-2. Report No.: RF111028C08A-3 18 Report Format Version 4.0.0 Reference No.:111125C10

4.2.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 10 Hz for Average detection (AV) at frequency above 1GHz. 4.2.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF111028C08A-3 19 Report Format Version 4.0.0 Reference No.:111125C10

4.2.5 TEST SETUP Test Receiver For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 4.2.6 EUT OPERATING CONDITIONS Same as 4.1.6 Report No.: RF111028C08A-3 20 Report Format Version 4.0.0 Reference No.:111125C10

4.2.7 TEST RESULTS BELOW 1GHz DATA： EUT TEST CONDITION MEASUREMENT DETAIL 11a : Ch157 CHANNEL FREQUENCY RANGE Below 1000MHz 8DBPSK : Ch0 DETECTOR INPUT POWER DC 3.3V Quasi-Peak FUNCTION ENVIRONMENTAL 18deg. C, 64%RH TESTED BY Nick Chang CONDITIONS ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 34.26 31.4 QP 40.0 -8.6 1.00 H 237 18.06 13.38 2 216.04 38.6 QP 46.0 -7.4 1.00 H 300 26.63 11.98 3 304.50 41.1 QP 46.0 -4.9 1.00 H 88 25.57 15.50 4 522.06 31.5 QP 46.0 -14.5 1.51 H 249 10.96 20.55 5 604.94 37.2 QP 46.0 -8.8 1.49 H 260 14.88 22.28 6 696.01 31.0 QP 46.0 -15.0 1.01 H 239 7.90 23.06 7 848.66 34.7 QP 46.0 -11.4 1.49 H 358 8.45 26.20 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 40.78 35.4 QP 40.0 -4.6 1.01 V 2 21.23 14.17 2 149.13 28.7 QP 43.5 -14.8 1.01 V 252 14.07 14.62 3 259.27 28.3 QP 46.0 -17.8 1.51 V 304 14.60 13.65 4 334.46 30.2 QP 46.0 -15.8 1.51 V 275 14.06 16.17 5 480.01 27.8 QP 46.0 -18.2 1.01 V 289 8.24 19.58 6 650.06 29.6 QP 46.0 -16.4 1.01 V 291 6.98 22.60 7 848.18 33.3 QP 46.0 -12.7 1.48 V 110 7.14 26.19 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF111028C08A-3 21 Report Format Version 4.0.0 Reference No.:111125C10

ABOVE 1GHz DATA EUT TEST CONDITION MEASUREMENT DETAIL 11a : Ch157 CHANNEL FREQUENCY RANGE 1 ~ 40GHz 8DBPSK : Ch0 DETECTOR Peak (PK) INPUT POWER DC 3.3V FUNCTION Average (AV) ENVIRONMENTAL 19deg. C, 66%RH TESTED BY Kent Liu CONDITIONS ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 4960.00 50.3 PK 74.0 -23.7 1.73 H 122 10.50 39.81 2 4960.00 37.6 AV 54.0 -16.4 1.73 H 122 -2.19 39.81 3 7440.00 55.5 PK 74.0 -18.5 1.36 H 33 8.77 46.74 4 7440.00 42.8 AV 54.0 -11.2 1.36 H 33 -3.98 46.74 5 11570.00 55.5 PK 74.0 -18.6 1.35 H 13 7.26 48.19 6 11570.00 44.6 AV 54.0 -9.4 1.35 H 13 -3.61 48.19 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 4960.00 50.3 PK 74.0 -23.7 1.26 V 287 10.53 39.81 2 4960.00 38.0 AV 54.0 -16.0 1.26 V 287 -1.81 39.81 3 7440.00 57.1 PK 74.0 -16.9 1.11 V 231 10.34 46.74 4 7440.00 47.0 AV 54.0 -7.1 1.11 V 231 0.21 46.74 5 11570.00 55.7 PK 74.0 -18.3 1.51 V 308 7.48 48.19 6 11570.00 44.9 AV 54.0 -9.1 1.51 V 308 -3.26 48.19 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF111028C08A-3 22 Report Format Version 4.0.0 Reference No.:111125C10

4. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. Copies of accreditation and authorization certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5.phtml. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26052943 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety/Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3185050 Email: service.adt@tw.bureauveritas.com Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also. ---END--- Report No.: RF111028C08A-3 23 Report Format Version 4.0.0 Reference No.:111125C10


Document Created: 2012-04-10 14:09:26
Document Modified: 2012-04-10 14:09:26
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC