Test Report

FCC ID: UU3FC302V

Test Report

Download: PDF
FCCID_3137039

FCC PART 90 TEST REPORT For Shenzhen Friendcom Technology Development Co., Ltd. 6/F, 17 Building, Guangqian Industrial Park, Longzhu Road, Xili Town, Nanshan, Shenzhen, China FCC ID: UU3FC302V Report Type: Product Type: Original Report FC-302V Radio Test Engineer: Simon Wang Report Number: RSZ160811011-00A1 Report Date: 2016-08-25 Bell Hu Reviewed By: RF Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Note: This test report is prepared for the customer shown above and for the equipment described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ160811011-00A1 TABLE OF CONTENTS GENERAL INFORMATION .......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................3 OBJECTIVE ...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S) .............................................................................................................................3 TEST METHODOLOGY ..................................................................................................................................................3 TEST FACILITY .............................................................................................................................................................4 SYSTEM TEST CONFIGURATION ..........................................................................................................................5 DESCRIPTION OF TEST CONFIGURATION ......................................................................................................................5 EUT EXERCISE SOFTWARE ..........................................................................................................................................5 EQUIPMENT MODIFICATIONS .......................................................................................................................................5 SUPPORT EQUIPMENT LIST AND DETAILS ....................................................................................................................5 EXTERNAL I/O CABLE..................................................................................................................................................5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................6 SUMMARY OF TEST RESULTS ...............................................................................................................................7 FCC §15.247 (i) & §1.1307 (b) (1) & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) ..............................8 APPLICABLE STANDARD ..............................................................................................................................................8 RESULT ........................................................................................................................................................................8 FCC §2.1053 & §90.210 - RADIATED SPURIOUS EMISSIONS ............................................................................9 APPLICABLE STANDARD ..............................................................................................................................................9 TEST EQUIPMENT LIST AND DETAILS ...........................................................................................................................9 TEST PROCEDURE ........................................................................................................................................................9 TEST DATA ................................................................................................................................................................10 FCC PART 90 Page 2 of 10

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ160811011-00A1 GENERAL INFORMATION Product Description for Equipment under Test (EUT) The Shenzhen Friendcom Technology Development Co., Ltd.’s product, model number: FC-302V (FCC ID: UU3FC302V) or the "EUT" in this report was a FC-302V Radio, which was measured approximately: 117 mm (L) × 63 mm (W) × 32 mm (H), rated input voltage: DC 12 V. * All measurement and test data in this report was gathered from production sample serial number: 1602630 (Assigned by Applicant). The EUT supplied by the applicant was received on 2016-08-11. Objective This test report is prepared on behalf of Shenzhen Friendcom Technology Development Co., Ltd. in accordance with Part 2 and Part 90 of the Federal Communication Commissions rules. Related Submittal(s)/Grant(s) No related submittal(s). Test Methodology All tests and measurements indicated in this document were performed in accordance with the Code of federal Regulations Title 47 Part 2, Sub-part J as well as the following individual parts: Part 90 – Private Land Mobile Radio Service Applicable Standards: TIA 603-D All emissions measurement was performed and Bay Area Compliance Laboratories Corp. (Shenzhen). The radiated testing was performed at an antenna-to-EUT distance of 3 meters. Measurement uncertainty with radiated emission is 5.91 dB for 30MHz-1GHz.and 4.92 dB for above 1GHz, 1.95dB for conducted measurement. FCC PART 90 Page 3 of 10

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ160811011-00A1 Test Facility The test site used by Bay Area Compliance Laboratories Corp. (Shenzhen) to collect test data is located on the 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China. Test site at Bay Area Compliance Laboratories Corp. (Shenzhen) has been fully described in reports submitted to the Federal Communication Commission (FCC). The details of these reports have been found to be in compliance with the requirements of Section 2.948 of the FCC Rules on October 31, 2013. The facility also complies with the radiated and AC line conducted test site criteria set forth in ANSI C63.4- 2014. The Federal Communications Commission has the reports on file and is listed under FCC Registration No.: 382179. The test site has been approved by the FCC for public use and is listed in the FCC Public Access Link (PAL) database. FCC PART 90 Page 4 of 10

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ160811011-00A1 SYSTEM TEST CONFIGURATION Description of Test Configuration The system was configured for testing in a test mode which has been done in the factory. EUT Exercise Software 1. FC-302 QuickSet En v0.1.11.exe 2. ComMonitor.exe Equipment Modifications No modification was made to the EUT tested. Support Equipment List and Details Manufacturer Description Model Serial Number GWINSTEK DC Power Supply GPS-3030DD N/A N/A 50 ohm Load N/A N/A Friendcom Test jig FC-302-SetBoard V2 N/A External I/O Cable Cable Description Length (m) From/Port To Un-shielding Detachable AC Power Cable 1.5 DC Power Supply Mains Un-shielding Detachable DC Power Cable 1.2 DC Power Supply Test jig Shielding Detachable RF Cable 0.5 EUT Load Un-shielding Detachable RSS 232Cable 0.3 EUT Test jig Shielding Detachable RS232-to-USB Cable 1.5 Test jip PC FCC PART 90 Page 5 of 10

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ160811011-00A1 Block Diagram of Test Setup Mains PC DC power Supply Load Test jig 1.0 Meter EUT Non-Conducting Table 150 cm above Ground Plane 1.5 Meter FCC PART 90 Page 6 of 10

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ160811011-00A1 SUMMARY OF TEST RESULTS FCC Rules Description of Test Results §15.247 (i), §1.1307 (b) Maximum Permissible Exposure(MPE) Compliance (1)& §2.1091 §2.1046;§90.205 RF Output Power Compliance* §2.1047;§90.207 Modulation Characteristic Compliance* §2.1049;§90.209; §90.210 Occupied Bandwidth & Emission Mask Compliance* §2.1051;§90.210 Spurious Emission at Antenna Terminal Compliance* §2.1053;§90.210 Spurious Radiated Emissions Compliance §2.1055;§90.213 Frequency Stability Compliance* §90.214 Transient Frequency Behavior Compliance* Compliance*: Please referred to FCC ID: UU3FC302VD granted on 2016-08-09, report No.: RSZ160629003-00, which was tested by Bay Area Compliance Laboratories Corp. (Shenzhen). The applicant declared that the only difference between the original device (FCC ID: UU3FC302VD) and the EUT is below: The original device, FCC ID: UU3FC302VD, has the 4FSK borad, however, the 4FSK borad was removed from the EUT. All others are same, please refer to EUT photos for the details. FCC PART 90 Page 7 of 10

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ160811011-00A1 FCC §15.247 (i) & §1.1307 (b) (1) & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) Applicable Standard According to subpart 15.247 (i) and subpart 1.1307 (b)(1), 2.1091 systems operating under the provisions of this section shall be operated in a manner that ensures the public is not exposed to RF energy level in excess of the communication guidelines. Limits for General Population/Uncontrolled Exposure Frequency Electric Field Magnetic Field Power Averaging Range Strength Strength Density Time (MHz) (V/m) (A/m) (mW/cm2) (Minutes) 0.3-1.34 614 1.63 *(100) 30 2 1.34-30 824/f 2.19/f *(180/f ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Result Calculated Formulary: Predication of MPE limit at a given distance PG S= 4R 2 S = power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW). G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain. R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) Antenna Gain Conducted Power Evaluation Power Frequency MPE Limit Distance Density (MHz) (dBi) (numeric) (dBm) (mW) (mW/cm2) (cm) (mW/cm2) 136-174 9.0 7.94 37.5 5623.41 150 0.16 0.20 Note: To maintain compliance with the FCC’s RF exposure guidelines, place the equipment at least 150cm from nearby persons. Result: Compliance FCC PART 90 Page 8 of 10

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ160811011-00A1 FCC §2.1053 & §90.210 - RADIATED SPURIOUS EMISSIONS Applicable Standard FCC §2.1053 and §90.210 Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Rohde & Schwarz EMI Test Receiver ESCI 101120 2015-12-15 2016-12-14 HP Amplifier 8447E 1937A01046 2016-05-06 2017-05-06 Sunol Sciences Broadband Antenna JB3 A111513 2014-06-18 2017-06-17 Rohde & Schwarz Signal Analyzer FSIQ26 837405/023 2016-04-27 2017-04-26 Sunol Sciences Horn Antenna DRH-118 A052304 2013-12-01 2016-11-30 HP Synthesized Sweeper 8341B 2624A00116 2016-07-02 2017-07-01 Mini-Circuits Amplifier ZVA-183-S+ 5969001149 2016-04-23 2017-04-23 A.H. System Horn Antenna SAS-200/571 135 2015-08-18 2018-08-17 COM POWER Dipole Antenna AD-100 041000 NCR NCR * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed in accordance to requirements, traceable to National Primary Standards and International System of Units (SI). Test Procedure The transmitter was placed on a wooden turntable, and it was transmitting into a non-radiating load, which was also placed on the turntable. The measurement antenna was placed at a distance of 3 meters from the EUT. During the tests, the antenna height and polarization as well as EUT azimuth were varied in order to identify the maximum level of emissions from the EUT .The test was performed by placing the EUT on 3-orthogonal axis. The frequency range up to teeth harmonic of the fundamental frequency was investigated. Remove the EUT and replace it with substitution antenna. A signal generator was connected to the substitution antenna by a non-radiating cable. The absolute levels of the spurious emissions were measured by the substitution. Spurious emissions in dB =10 1g (TXpwr in Watts/0.001)-the absolute level Spurious attenuation limit in dB =50+10 Log10 (power out in Watts) for EUT with a 12.5 kHz channel bandwidth. Spurious attenuation limit in dB =55+10 Log10 (power out in Watts) for EUT with a 6.25 kHz channel bandwidth. FCC PART 90 Page 9 of 10

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ160811011-00A1 Test Data Environmental Conditions Temperature: 24 ℃ Relative Humidity: 49 % ATM Pressure: 101.0 kPa The testing was performed by Simon Wang on 2016-08-25. Test Mode: Transmitting 30 MHz – 2 GHz: Turn Rx Antenna Substituted FCC Part 90 Receiver Absolute Frequency Table SG Cable Antenna Reading Height Polar Level Limit Margin (MHz) Angle Level Loss Gain (dBμV) (m) (H/V) (dBm) (dBm) (dB) Degree (dBm) (dB) (dB) Analog 155.75 MHz 6.25kHz 311.5 40.54 66 2.1 H -56.5 0.36 0 -56.86 -25 31.86 311.5 37.96 37 2.4 V -59.0 0.36 0 -59.36 -25 34.36 1401.75 51.39 11 1.4 H -57.0 1.20 6.40 -51.80 -25 26.80 1401.75 49.68 324 1.3 V -58.8 1.20 6.40 -53.60 -25 28.60 Analog 155.75 MHz 12.5kHz 311.5 38.8 142 1.5 H -58.2 0.36 0 -58.56 -20 38.56 311.5 37.35 76 1.7 V -59.6 0.36 0 -59.96 -20 39.96 1246 48.72 129 1.0 H -58.5 1.50 6.20 -53.80 -20 33.80 1246 49.65 322 1.1 V -58.7 1.50 6.20 -54.00 -20 34.00 Note: Absolute Level = SG Level - Cable loss + Antenna Gain Margin = Limit- Absolute Level ***** END OF REPORT ***** FCC PART 90 Page 10 of 10


Document Created: 2017-12-14 19:58:25
Document Modified: 2017-12-14 19:58:25
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC