Test Report

FCC ID: USEZ99MU10

Test Report

Download: PDF
FCCID_2746631

TEST REPORT Test Report No. : UL-RPT-RP77508JD01A V3.0 Manufacturer : Paxton Ltd Model No. : Proximity Mullion Reader / z99-mu10 FCC ID : USEZ99MU10 Technology : RFID – 125 kHz Test Standard(s) : FCC Parts 15.207, 15.209 and 15.215 1. This test report shall not be reproduced in full or partial, without the written approval of UL VS LTD. 2. The results in this report apply only to the sample(s) tested. 3. The sample tested is in compliance with the above standard(s). 4. The test results in this report are traceable to the national or international standards. 5. Version 3.0 supersedes Test Report Serial Number RFI-RPT-RP77508JD01A_V2.0. The original test report was issued under the previous company name of RFI Global Services Ltd. Date of Issue: 15 JULY 2015 Checked by: Ian Watch Senior Engineer, Radio Laboratory Issued by : pp John Newell Quality Manager, UL VS LTD This laboratory is accredited by UKAS. The tests reported herein have been performed in accordance with its terms of accreditation. UL VS LTD Pavilion A, Ashwood Park, Ashwood Way, Basingstoke, Hampshire, RG23 8BG, UK Telephone: +44 (0)1256 312000 Facsimile: +44 (0)1256 312001

TEST REPORT SERIAL NO: UL-RPT-RP77508JD01A V3.0 VERSION 3.0 ISSUE DATE: 15 JULY 2015 This page has been left intentionally blank. Page 2 of 17 UL VS LTD

TEST REPORT SERIAL NO: UL-RPT-RP77508JD01A V3.0 VERSION 3.0 ISSUE DATE: 15 JULY 2015 Table of Contents 1. Customer Information................................................................................................................ 4 2. Summary of Testing................................................................................................................... 5 2.1. General Information 5 2.2. Summary of Test Results 5 2.3. Methods and Procedures 5 2.4. Deviations from the Test Specification 5 3. Equipment Under Test (EUT) .................................................................................................... 6 3.1. Identification of Equipment Under Test (EUT) 6 3.2. Description of EUT 6 3.3. Modifications Incorporated in the EUT 6 3.4. Additional Information Related to Testing 6 3.5. Support Equipment 6 4. Operation and Monitoring of the EUT during Testing ............................................................. 7 4.1. Operating Modes 7 4.2. Configuration and Peripherals 7 5. Measurements, Examinations and Derived Results ................................................................ 8 5.1. General Comments 8 5.2. Test Results 9 5.2.1. Transmitter AC Conducted Spurious Emissions 9 5.2.2. Transmitter Fundamental Field Strength 11 5.2.3. Transmitter Radiated Spurious Emissions 12 5.2.4. Transmitter 20 dB Bandwidth 14 6. Measurement Uncertainty ........................................................................................................15 7. Report Revision History ...........................................................................................................16 Appendix 1. Test Equipment Used ..............................................................................................17 UL VS LTD Page 3 of 17

TEST REPORT SERIAL NO: UL-RPT-RP77508JD01A V3.0 VERSION 3.0 ISSUE DATE: 15 JULY 2015 1. Customer Information Company Name: Paxton Ltd Address: Paxton House Home Farm Brighton Sussex BN1 9HU Page 4 of 17 UL VS LTD

TEST REPORT SERIAL NO: UL-RPT-RP77508JD01A V3.0 VERSION 3.0 ISSUE DATE: 15 JULY 2015 2. Summary of Testing 2.1. General Information Specification Reference: 47CFR15.207, 47CFR15.209 & 47CFR15.215 Specification Title: Code of Federal Regulations Volume 47 (Telecommunications): Part 15 Subpart B (Radio Frequency Devices) ) - Sections 15.207, 15.209 & 15.215 Site Registration: FCC: 209735 Location of Testing: UL VS LTD, Unit 3 Horizon, Wade Road, Kingsland Business Park, Basingstoke, Hampshire, RG24 8AH, United Kingdom Test Dates: 05 May 2010 2.2. Summary of Test Results FCC Reference Measurement Result (47CFR) Part 15.207 Transmitter AC Conducted Spurious Emissions Part 15.209 Transmitter Radiated Spurious Emissions (Fundamental) Part 15.209 Transmitter Radiated Spurious Emissions Part 15.215(c) Transmitter 20 dB Bandwidth Key to Results = Complied = Did not comply 2.3. Methods and Procedures Reference: ANSI C63.4 (2009) Title: American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz Reference: ANSI C63.10 (2009) Title: American National Standard for Testing Unlicensed Wireless Devices 2.4. Deviations from the Test Specification For the measurements contained within this test report, there were no deviations from, additions to, or exclusions from the test specification identified above. UL VS LTD Page 5 of 17

TEST REPORT SERIAL NO: UL-RPT-RP77508JD01A V3.0 VERSION 3.0 ISSUE DATE: 15 JULY 2015 3. Equipment Under Test (EUT) 3.1. Identification of Equipment Under Test (EUT) Brand Name: Proximity Mullion Reader UL Model Name/Number: Proximity mullion reader / z99-mu10 Serial Number: None stated Hardware Version: z-5muu Rev. 2, ppc-5mu Rev. A Software Version: None FCC ID Number: USEZ99MU10 3.2. Description of EUT The equipment under test was a proximity reader for access control. It has functionality for reading tokens with 125 kHz carrier frequencies. 3.3. Modifications Incorporated in the EUT No modifications were applied to the EUT during testing. 3.4. Additional Information Related to Testing Tested Technology: RFID Modulation Type: Amplitude Modulation Transmit / Receive Frequency: 125 kHz 3.5. Support Equipment The following support equipment was used to exercise the EUT during testing: Description: Net2 1 door ACU with 2A PSU in metal cabinet Brand Name: Paxton Access Ltd Model Name or Number: 411-381 Serial Number: Not marked or stated Page 6 of 17 UL VS LTD

TEST REPORT SERIAL NO: UL-RPT-RP77508JD01A V3.0 VERSION 3.0 ISSUE DATE: 15 JULY 2015 4. Operation and Monitoring of the EUT during Testing 4.1. Operating Modes The EUT was tested in the following operating mode(s): • Transceive mode • The reader has only one mode of operation as it is constantly transmitting and receiving when in operation. It does not have a dedicated ‘receive only’ mode. 4.2. Configuration and Peripherals The EUT was tested in the following configuration(s): • Connected to a Paxton Access Net2 1 door ACU with 2A PSU in metal cabinet. This provided power and data connection to the EUT. • AC conducted emissions were performed with the EUT connected to the ACU and the ACU connected to a 120 VAC 60 Hz supply through a LISN. UL VS LTD Page 7 of 17

TEST REPORT SERIAL NO: UL-RPT-RP77508JD01A V3.0 VERSION 3.0 ISSUE DATE: 15 JULY 2015 5. Measurements, Examinations and Derived Results 5.1. General Comments Measurement uncertainties are evaluated in accordance with current best practice. Our reported expanded uncertainties are based on standard uncertainties, which are multiplied by an appropriate coverage factor to provide a statistical confidence level of approximately 95%. Please refer to Section 6 Measurement Uncertainty for details. Page 8 of 17 UL VS LTD

TEST REPORT SERIAL NO: UL-RPT-RP77508JD01A V3.0 VERSION 3.0 ISSUE DATE: 15 JULY 2015 5.2. Test Results 5.2.1. Transmitter AC Conducted Spurious Emissions Test Summary: FCC Part: 15.207 Test Method Used: As detailed in ANSI C63.10 Section 6.2 referencing ANSI C63.4 Environmental Conditions: Temperature (°C): 23 Relative Humidity (%): 31 Results: Quasi Peak Detector Measurements Frequency Line Level Limit Margin Result (MHz) µV) (dBµ µV) (dBµ (dB) 0.424500 Neutral 38.7 57.4 18.7 Complied 0.433500 Neutral 36.9 57.2 20.3 Complied 26.754000 Neutral 38.5 60.0 21.5 Complied 27.006000 Live 38.2 60.0 21.8 Complied 27.253500 Live 39.7 60.0 20.3 Complied 27.505500 Live 39.7 60.0 20.3 Complied 27.753000 Live 40.2 60.0 19.8 Complied 28.005000 Live 40.4 60.0 19.6 Complied 28.252500 Live 39.9 60.0 20.1 Complied 28.504500 Live 40.3 60.0 19.7 Complied Results: Average Detector Measurements Frequency Line Level Limit Margin Result (MHz) µV) (dBµ µV) (dBµ (dB) 27.253500 Live 37.0 50.0 13.0 Complied 27.505500 Live 37.2 50.0 12.8 Complied 27.753000 Live 37.9 50.0 12.1 Complied 28.005000 Live 38.3 50.0 11.7 Complied 28.252500 Live 37.8 50.0 12.2 Complied 28.504500 Live 38.3 50.0 11.7 Complied 28.756500 Live 36.4 50.0 13.6 Complied 29.004000 Live 37.3 50.0 12.7 Complied 29.256000 Live 36.1 50.0 13.9 Complied 29.755500 Live 36.0 50.0 14.0 Complied UL VS LTD Page 9 of 17

TEST REPORT SERIAL NO: UL-RPT-RP77508JD01A V3.0 VERSION 3.0 ISSUE DATE: 15 JULY 2015 Transmitter AC Conducted Spurious Emissions (continued) FCC Part 15.107 Conducted Emissions Class B 80 75 70 65 FCC Part 15 Class B Voltage QP 60 55 FCC Part 15 Class B Voltage AV 50 45 40 35 Level in dBµV 30 25 20 15 10 5 0 -5 -10 -15 -20 150k 300k 400k 500k 800k 1M 2M 3M 4M 5M 6M 8M 10M 20M 30M Frequency in Hz Note: This plot is a pre-scan and for indication purposes only. For final measurements, see accompanying tables. Page 10 of 17 UL VS LTD

TEST REPORT SERIAL NO: UL-RPT-RP77508JD01A V3.0 VERSION 3.0 ISSUE DATE: 15 JULY 2015 5.2.2. Transmitter Fundamental Field Strength Test Summary: FCC Part: 15.209(a) Test Method Used: As detailed in ANSI C63.10 Sections 6.3 and 6.4 referencing ANSI C63.4 Environmental Conditions: Temperature (°C): 23 Relative Humidity (%): 31 Results: Frequency Antenna Q-P Level Limit Margin Result (MHz) Polarity µV/m) (dBµ µV/m) (dBµ (dB) 0.125 45° to EUT 6.9 19.2 (at 300m) 12.3 Complied Note(s): 1. Limits below 30 MHz are specified at a test distance of 30 metres, whilst below 0.49 MHz they are specified at a test distance of 300 metres. However, as specified by FCC Section 15.31 (f)(2), measurements may be performed at a closer distance and the measured level corrected to the specified measurement distance by making the measurements at a minimum of two distances on at least one radial to determine the proper extrapolation factor. 2. A transducer factor on the measuring instrument was used to extrapolate the results at 3 metres to the required test distance. Note: An additional 20 dB has been added to attain the final value shown in the table; this is to account for a transducer factor that was not included during the original measurement. i.e.: -13.1 dBuV/m + 20 dB = 6.9 dBuV/m UL VS LTD Page 11 of 17

TEST REPORT SERIAL NO: UL-RPT-RP77508JD01A V3.0 VERSION 3.0 ISSUE DATE: 15 JULY 2015 5.2.3. Transmitter Radiated Spurious Emissions Test Summary: FCC Part: 15.209 (a) Test Method Used: As detailed in ANSI C63.10 Sections 6.3, 6.4 and 6.5 referencing ANSI C63.4 Frequency Range: 9 kHz to 1000 MHz Environmental Conditions: Temperature (°C): 23 Relative Humidity (%): 31 Results: Electric Field Strength Measurements Frequency Antenna Quasi-Peak Limit Margin Result (MHz) Polarity Level µV/m) (dBµ (dB) µV/m) (dBµ 13.425 45º to EUT 6.4 29.5 23.1 Complied 25.055 90º to EUT 12.1 29.5 17.4 Complied 30.290 Horizontal 14.6 40.0 25.4 Complied Note(s): 1. Limits below 30 MHz are specified at a test distance of 30 metres, whilst below 0.49 MHz they are specified at a test distance of 300 metres. However, as specified by FCC Section 15.31 (f)(2), measurements may be performed at a closer distance and the measured level corrected to the specified measurement distance by making the measurements at a minimum of two distances on at least one radial to determine the proper extrapolation factor. 2. Below 30 MHz a transducer factor on the measuring instrument was used to extrapolate the test results performed at 3 metres to the required test distance. 3. The carrier is shown on the 9 kHz to 150 kHz pre-scan plot at approximately 125 kHz. 4. All other emissions on the 9 kHz to 150 kHz plot were investigated and were found to radiate from the test site turntable motor and therefore ambient. 5. All emissions on the 30 MHz to 1 GHz scan (other than that recorded in the table above) were at least 20 dB below the appropriate specification limit. 6. All emissions on the 9 kHz – 30 MHz pre-scans are low by a factor of 20 dB, due to the absence of a transducer factor at the time of measurement. An additional 20 dB was subsequently added to any emissions observed during these pre-scans for comparisons with the limit, when determining the necessity for final measurements. Page 12 of 17 UL VS LTD

TEST REPORT SERIAL NO: UL-RPT-RP77508JD01A V3.0 VERSION 3.0 ISSUE DATE: 15 JULY 2015 Transmitter Radiated Spurious Emissions (continued) Marker 1 [T1] RBW 300 Hz RF Att 10 dB Marker 1 [T1] RBW 10 kHz RF Att 10 dB Ref Lvl -6.84 dB V/m VBW 1 kHz Ref Lvl 2.80 dB V/m VBW 30 kHz 40 dB* 125.23803043 kHz SWT 8 s Unit dB V/m 60 dB* 13.24501632 MHz SWT 760 ms Unit dB V/m 40 60 10 kHz 1 [T1] 100 kHz dB V/m -6.84 1 MHz 1 [T1]10 MHz 2.80 dB V/m A007FCC A A007FCC A 125.23803043 kHz 13.24501632 MHz 30 50 2 [T1] -1.75 dB V/m 25.31283183 MHz 20 40 10 IN1 30 IN1 1VIEW 1MA 1VIEW 1MA 0 20 1 -10 10 1 TDF TDF -20 0 2 -30 -10 -40 -20 -50 -30 -60 -40 Start 9 kHz Stop 150 kHz Start 150 kHz Stop 30 MHz Title: 77508JD01 Title: 77508JD01 Comment A: SPURIOUS EMISSIONS TX MODE Comment A: SPURIOUS EMISSIONS TX MODE Date: 5.MAY.2010 11:01:59 Date: 5.MAY.2010 10:25:28 FCC Part 15.109 Radiated Emissions Class B 30MHz-1GHz 80 75 70 65 60 55 FCC Part 15 Class B Field Strength QP 3M 50 45 Level in dBµV/m 40 35 30 25 20 15 10 5 0 30M 50M 60M 80M 100M 200M 300M 400M 500M 800M 1G Frequency in Hz Note: These plots are pre-scans and for indication purposes only. For final measurements, see accompanying tables. UL VS LTD Page 13 of 17

TEST REPORT SERIAL NO: UL-RPT-RP77508JD01A V3.0 VERSION 3.0 ISSUE DATE: 15 JULY 2015 5.2.4. Transmitter 20 dB Bandwidth Test Summary: FCC Part: 15.215(c) Test Method Used: As detailed in ANSI C63.10 Section 6.9.1 (see note below) Environmental Conditions: Temperature (°C): 22 Relative Humidity (%): 32 Results: Transmitter 20 dB Bandwidth (Hz) 601 Note(s): 1. It was not possible to measure the 20 dB bandwidth (OBW) using a 3 dB RBW of 1% to 5% of the OBW together with a span of between two and five times the OBW because the test receiver returned an ‘Uncalibrated’ error message on its display. The settings chosen were those closest to those proscribed in ANSI C63.10 Section 6.9.1(b) that returned a calibrated measurement. Delta 1 [T1] RBW 100 Hz RF Att 10 dB Ref Lvl -0.17 dB VBW 300 Hz -20 dBm 601.20240481 Hz SWT 1.5 s Unit dBm -20 A -30 -40 -50 IN1 1VIEW 1MA -60 -70 -80 1 1 D2 -86.1 dBm -90 -100 -110 -120 Center 125 kHz 100 Hz/ Span 1 kHz Title: 77508JD01 Comment A: 20dB BANDWIDTH Date: 5.MAY.2010 15:30:55 Page 14 of 17 UL VS LTD

TEST REPORT SERIAL NO: UL-RPT-RP77508JD01A V3.0 VERSION 3.0 ISSUE DATE: 15 JULY 2015 6. Measurement Uncertainty No measurement or test can ever be perfect and the imperfections give rise to error of measurement in the results. Consequently the result of a measurement is only an approximation to the value of the measured (the specific quantity subject to measurement) and is only complete when accompanied by a statement of the uncertainty of the approximation. The expression of uncertainty of a measurement result allows realistic comparison of results with reference values and limits given in specifications and standards. The uncertainty of the result may need to be taken into account when interpreting the measurement results. The reported expanded uncertainties below are based on a standard uncertainty multiplied by an appropriate coverage factor such that a confidence level of approximately 95% is maintained. For the purposes of this document “approximately” is interpreted as meaning “effectively” or “for most practical purposes”. Confidence Calculated Measurement Type Range Level (%) Uncertainty AC Conducted Spurious Emissions 150 kHz to 30 MHz 95% ±3.25 dB Radiated Spurious Emissions 9 kHz to 30 MHz 95% ±3.53 dB Radiated Spurious Emissions 30 MHz to 1000 MHz 95% ±2.94 dB 20 dB Bandwidth 9 kHz to 150 kHz 95% ±0.92 ppm The methods used to calculate the above uncertainties are in line with those recommended within the various measurement specifications. Where measurement specifications do not include guidelines for the evaluation of measurement uncertainty the published guidance of the appropriate accreditation body is followed. UL VS LTD Page 15 of 17

TEST REPORT SERIAL NO: UL-RPT-RP77508JD01A V3.0 VERSION 3.0 ISSUE DATE: 15 JULY 2015 7. Report Revision History Version Revision Details Number Page No(s) Clause Details 2.0 - - Previous Version 3.0 11 & 12 - Corrected previously reported emissions levels at frequencies < 30 MHz by +20 dB Page 16 of 17 UL VS LTD

TEST REPORT SERIAL NO: UL-RPT-RP77508JD01A V3.0 VERSION 3.0 ISSUE DATE: 15 JULY 2015 Appendix 1. Test Equipment Used Cal. UL Date Last Instrument Manufacturer Type No. Serial No. Interval No. Calibrated (Months) A1829 Pulse Limiter Rhode & Schwarz ESH3-Z2 100671 25 Oct 2009 12 A553 Antenna Chase CBL6111A 1593 16 Mar 2010 12 A649 LISN Rohde & Schwarz ESH3-Z5 825562/008 16 Mar 2010 12 Sonoma G0543 Amplifier 310N 230801 04 Jun 2009 12 Instrument 5m Semi-Anechoic K0001 Rainford EMC N/A N/A 25 Apr 2010 12 Chamber L1001 Test Receiver Rhode & Schwarz ESU26 100239 28 Jan 2010 12 M1273 Test Receiver Rhode & Schwarz ESIB 26 100275 08 Apr 2010 12 M1568 Magnetic Loop Rohde & Schwarz HFH2-Z2 879284/2 14 Jan 2010 12 NB In accordance with UKAS requirements all the measurement equipment is on a calibration schedule. --- END OF REPORT --- UL VS LTD Page 17 of 17


Document Created: 2015-07-15 09:27:49
Document Modified: 2015-07-15 09:27:49
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC