Test Report 2

FCC ID: UPO302-0006

Test Report

Download: PDF
FCCID_1250190

TEST REPORT FROM RFI GLOBAL SERVICES LTD Test of: 3000 DAS – Coaxial Remote Unit To: FCC Part 27: 2009 Subpart C Test Report Serial No: RFI/RPT2/RP77098JD03A Supersedes Test Report Serial No: RFI/RPT1/RP77098JD03A This Test Report Is Issued Under The Authority of pp Brian Watson, COO Payments and Consultancy: Checked By: R. Graham Date of Issue: 04 March 2010 This report is issued in Adobe Acrobat portable document format (PDF). It is only a valid copy of the report if it is being viewed in PDF format with the following security options not allowed: Changing the document, Selecting text and graphics, Adding or changing notes and form fields. This report may not be reproduced other than in full, except with the prior written approval of RFI Global Services Ltd. The results in this report apply only to the sample(s) tested.

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 This page has been left intentionally blank. Page 2 of 24 RFI Global Services Ltd

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 Table of Contents 1. Customer Information ..................................................................................................................4 2. Summary of Testing .....................................................................................................................5 3. Equipment Under Test (EUT) .......................................................................................................6 4. Operation and Monitoring of the EUT during Testing ...............................................................8 5. Measurements, Examinations and Derived Results ..................................................................9 6. Measurement Uncertainty ..........................................................................................................23 Appendix 1. Test Equipment Used................................................................................................24 RFI Global Services Ltd Page 3 of 24

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 1. Customer Information Company Name: Zinwave Ltd. Address: Harston Mill Harston Cambridge CB22 7GG Page 4 of 24 RFI Global Services Ltd

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 2. Summary of Testing 2.1. General Information Specification Reference: 47CFR27 Specification Title: Code of Federal Regulations Volume 47 (Telecommunications) 2009: Part 27 Subpart H (Miscellaneous Wireless Communication Services) Site Registration: 209735 Location of Testing: RFI Global Services Ltd, Wade Road, Basingstoke, Hampshire, RG24 8AH. Test Dates: 05 February 2010 to 09 February 2010 2.2. Summary of Test Results FCC Reference Measurement Port Type Result (47CFR) FCC 27.50(c)(1) Transmitter Effective Radiated Power (ERP) Antenna Terminals FCC 2.1049 Transmitter Occupied Bandwidth Antenna Terminals FCC 2.1051/27.53(g) Transmitter Conducted Emissions Antenna Terminals (Out of Band) FCC 2.1053/27.53(g) Transmitter Radiated Emissions Enclosure (Out of Band) Key to Results = Complied = Did not comply 2.3. Methods and Procedures Reference: ANSI/TIA-603-C-2004 Title: Land Mobile Communications Equipment, Measurements and performance Standards Reference: ANSI C63.4 (2003) Title: American National Standard Methods of Measurement of Electromagnetic Emissions from Low Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. 2.4. Deviations from the Test Specification The testing has been performed in accordance with the following test plan produced by DheaniSulis for Zinwave for the Part 27, 728 MHz – 763 MHz band only: 3000 DAS: FCC test plan to parts 22H and 27 Document Number: DS09_ZIN_TP02_A; Issue Date: 25 January 2010 RFI Global Services Ltd Page 5 of 24

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 3. Equipment Under Test (EUT) 3.1. Identification of Equipment Under Test (EUT) Description: Distributed Antenna System – Primary Hub Brand Name: Zinwave Model Name or Number: 3000 DAS Part Number: 302-0001 Serial Number: 000006 Hardware Version Number: 3.13 Description: Distributed Antenna System – Remote Unit - Coaxial Brand Name: Zinwave Model Name or Number: Coaxial RU Part Number: 302-0006 Serial Number: 140130000126 FCC ID Number: UPO302-0006 3.2. Support Equipment Description: Distributed Antenna System – Remote Unit - Fibre Brand Name: Zinwave Model Name or Number: Fibre RU Part Number: 302-0007 Serial Number: 310230001218 FCC ID Number: UPO302-0007 Description: Remote Unit – Fibre, Power Supply Unit Brand Name: Ideal Power Model Name or Number: HK-HP-A12 Serial Number: None stated Page 6 of 24 RFI Global Services Ltd

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 3.3. Description of EUT The 3000 Hub and wideband remote unit is a bi-directional wide-band repeater station with a pass band of 136 MHz to 2700 MHz. Signals are transferred between the hub and remote unit via coaxial cable. 3.4. Modifications Incorporated in the EUT No modifications were applied to the EUT during testing. 3.5. Additional Information Related to Testing Power Supply Requirement: 120 V AC, 60 Hz Equipment Category: Control Station Type of Unit: DAS (Distributed Antenna System) Transmit Frequency Range: 728 MHz to 763 MHz Transmit Channels Tested: Channel Bandwidth Modulation Frequency (MHz) (MHz) OFDM 64QAM 5 728.0 OFDM 64QAM 10 728.0 Maximum Power Output (ERP) 28.0 dBm RFI Global Services Ltd Page 7 of 24

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 4. Operation and Monitoring of the EUT during Testing 4.1. Operating Modes The EUT was tested in the following operating mode(s): • . Transmit mode, (maximum output power/gain). 4.2. Configuration and Peripherals The EUT was tested in the following configuration(s): • The EUT comprises of three separate units. One Primary Hub and two Remote Units [1x Fibre Optic, 1x Coaxial Unit]. The primary hub was connected to the remote unit via fibre optic cables and coaxial cables depending on the unit connected. An input signal was fed into the primary hub and was measured from the output of the remote unit. The remote unit was operating at maximum output power with the maximum gain settings allowed. • For radiated emissions testing, the EUT was connected to an input signal. The input level was adjusted to give a signal output level of +20.0 dBm. Testing was performed on both the fibre unit and coaxial units with the antenna ports on the remote units terminated. • For conducted testing, the EUT was connected with one input signal which was fed into the unit with the antenna port on the remote unit used as the measurement point. Measurements were performed on the coaxial unit only. The fibre unit remained terminated throughout the testing. Page 8 of 24 RFI Global Services Ltd

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 5. Measurements, Examinations and Derived Results 5.1. General Comments Measurement uncertainties are evaluated in accordance with current best practice. Our reported expanded uncertainties are based on standard uncertainties, which are multiplied by an appropriate coverage factor to provide a statistical confidence level of approximately 95%. Please refer to Section 6. Measurement Uncertainty for details. RFI Global Services Ltd Page 9 of 24

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 5.2. Test Results 5.2.1. Transmitter Effective Radiated Power (ERP) Test Summary: FCC Part: 27.50 (c) (9) Test Method Used: ANSI TIA-603-C-2004 Section 2 Environmental Conditions: Temperature (°C): 21 Relative Humidity Variation (%): 34 Results: 5 MHz Bandwidth Conducted Declared Frequency RF O/P ERP ERP Limit Margin Antenna Result (MHz) Power (dBm) (dBm) (dB) Gain (dB) (dBm) 728 19.9 8.0 27.9 44.8 16.9 Complied Results: 10 MHz Bandwidth Conducted Declared Frequency RF O/P ERP ERP Limit Margin Antenna Result (MHz) Power (dBm) (dBm) (dB) Gain (dB) (dBm) 728 20.0 8.0 28.0 44.8 16.8 Complied Page 10 of 24 RFI Global Services Ltd

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 5.2.2. Transmitter Occupied Bandwidth Test Summary: FCC Part: 2.1049 Test Method Used: As detailed in ANSI C63.4 Section 13.1.7 and relevant annexes Environmental Conditions: Temperature Variation (°C): 21 Relative Humidity Variation (%): 34 Results: Input Signal 5 MHz Bandwidth Frequency (MHz) Occupied Bandwidth (kHz) 728.000 4989.980 Results: Output Signal 5 MHz Bandwidth Frequency (MHz) Occupied Bandwidth (kHz) 728.000 4989.980 Note(s): 1. In lieu of the test method detailed in ANSI C63.4 Section 13.1.7 the occupied bandwidth was measured using the Occupied Bandwidth function of the spectrum analyser. Input Signal Output Signal NB: The signal level indicated in the ‘Input Signal’ graph above was taken with A1418 (30dB attenuator) removed from the measurement set up. The spectrum analyser reference level offset was not modified to reflect this change as the measurement result is independent of the actual signal level. RFI Global Services Ltd Page 11 of 24

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 5.2.3. Transmitter Occupied Bandwidth (Bandwidth Limitations) Test Summary: FCC Part: 2.1049 Test Method: As detailed in ANSI C63.4 Section 13.1.7 and relevant annexes Environmental Conditions: Temperature (°C): 21 Relative Humidity (%): 34 Results: Input Signal 10 MHz Bandwidth Frequency (MHz) Occupied Bandwidth (kHz) 728.000 9919.840 Results: Output Signal 10 MHz Bandwidth Frequency (MHz) Occupied Bandwidth (kHz) 728.000 9919.840 Note(s): 1. In lieu of the test method detailed in ANSI C63.4 Section 13.1.7 the occupied bandwidth was measured using the Occupied Bandwidth function of the spectrum analyser. Input Signal Output Signal NB: The signal level indicated in the ‘Input Signal’ graph above was taken with A1418 (30dB attenuator) removed from the measurement set up. The spectrum analyser reference level offset was not modified to reflect this change as the measurement result is independent of the actual signal level. Page 12 of 24 RFI Global Services Ltd

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 5.2.4. Transmitter Conducted Emissions (Out of Band) Test Summary: FCC Part: 2.1051 & 27.53 (g) Test Method: As detailed in ANSI C63.4 Section 8 and relevant annexes Environmental Conditions: Temperature (°C): 21 Relative Humidity (%): 34 Results: 5 MHz Bandwidth Peak Emission Limit Margin Frequency (MHz) Result Level (dBm) (dBm) (dB) 1787 -15.3 -13.0 2.3 Complied 2683 -21.3 -13.0 8.3 Complied Results: 10 MHz Bandwidth Peak Emission Limit Margin Frequency (MHz) Result Level (dBm) (dBm) (dB) 1791.227 -17.7 -13.0 4.7 Complied 2681.215 -24.8 -13.0 11.8 Complied Note(s): 1. All other emissions were at least 20 dB below the limit. 2. The emission shown exceeding the limit in the 30 MHz to 1 GHz plot is the 728 MHz fundamental. RFI Global Services Ltd Page 13 of 24

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 Transmitter Conducted Emissions (Out of Band) (continued) 5 MHz Bandwidth Note: These plots are pre-scans and for indication purposes only. For final measurements, see accompanying tables. Page 14 of 24 RFI Global Services Ltd

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 Transmitter Conducted Emissions (Out of Band) (continued) 5 MHz Bandwidth Note: These plots are pre-scans and for indication purposes only. For final measurements, see accompanying tables. RFI Global Services Ltd Page 15 of 24

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 Transmitter Conducted Emissions (Out of Band) (continued) 5 MHz Bandwidth Note: These plots are pre-scans and for indication purposes only. For final measurements, see accompanying tables. Page 16 of 24 RFI Global Services Ltd

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 Transmitter Conducted Emissions (Out of Band) (continued) 10 MHz Bandwidth Note: These plots are pre-scans and for indication purposes only. For final measurements, see accompanying tables. RFI Global Services Ltd Page 17 of 24

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 Transmitter Conducted Emissions (Out of Band) (continued) 10 MHz Bandwidth Note: These plots are pre-scans and for indication purposes only. For final measurements, see accompanying tables Page 18 of 24 RFI Global Services Ltd

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 Transmitter Conducted Emissions (Out of Band) (continued) 10 MHz Bandwidth Note: This plot is for pre-scans and for indication purposes only. For final measurements, see accompanying tables. RFI Global Services Ltd Page 19 of 24

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 5.2.5. Transmitter Radiated Emissions (Out of Band) Test Summary: FCC Part: 2.1053 & 27.53 (g) Test Method: As detailed in ANSI C63.4 Section 8 and relevant annexes Environmental Conditions: Temperature (°C): 21 Relative Humidity (%): 31 Results: Frequency Peak Emission Limit Margin Result (MHz) Level (dBm) (dBm) (dB) Refer to note 1 Note(s): 1. All emissions were greater than 20 dB below the limit. Page 20 of 24 RFI Global Services Ltd

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 Transmitter Radiated Emissions (Out of Band) (continued) Marker 1 [T1] RBW 1 MHz RF Att 10 dB Marker 1 [T1] RBW 1 MHz RF Att 10 dB Ref Lvl -37.37 dBm VBW 3 MHz Ref Lvl -45.96 dBm VBW 3 MHz 0 dBm 976.67334669 MHz SWT 5 ms Unit dBm 0 dBm 3.98797595 GHz SWT 7.5 ms Unit dBm 0 0 A A -10 -10 D1 -13 dBm D1 -13 dBm -20 -20 -30 IN1 -30 IN1 1MAX 1 1MA 1MAX 1MA -40 -40 1 -50 -50 TDF TDF -60 -60 -70 -70 -80 -80 -90 -90 -100 -100 Start 30 MHz 97 MHz/ Stop 1 GHz Start 1 GHz 300 MHz/ Stop 4 GHz Date: 6.FEB.2010 11:54:31 Date: 6.FEB.2010 12:00:14 30 MHz to 1 GHz 1 GHz to 4 GHz Marker 1 [T1] RBW 1 MHz RF Att 10 dB Marker 1 [T1] RBW 1 MHz RF Att 10 dB Ref Lvl -44.72 dBm VBW 3 MHz Ref Lvl -39.32 dBm VBW 3 MHz 0 dBm 6.97394790 GHz SWT 23 ms Unit dBm 0 dBm 12.53106212 GHz SWT 27 ms Unit dBm 0 0 A A -10 -10 D1 -13 dBm D1 -13 dBm -20 -20 -30 IN1 -30 IN1 1MAX 1MA 1MAX 1MA 1 -40 -40 1 -50 -50 TDF TDF -60 -60 -70 -70 -80 -80 -90 -90 -100 -100 Start 4 GHz 400 MHz/ Stop 8 GHz Start 8 GHz 475 MHz/ Stop 12.75 GHz Date: 6.FEB.2010 12:05:13 Date: 6.FEB.2010 12:08:12 4 GHz to 8 GHz 8 GHz to 12.75 GHz Note: These plots are pre-scans and for indication purposes only. For final measurements, see accompanying tables. RFI Global Services Ltd Page 21 of 24

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 Transmitter Radiated Emissions (Out of Band) (continued) Marker 1 [T1] RBW 1 MHz RF Att 10 dB Marker 1 [T1] RBW 1 MHz RF Att 10 dB Ref Lvl -35.91 dBm VBW 3 MHz Ref Lvl -43.68 dBm VBW 3 MHz 0 dBm 17.75801603 GHz SWT 30 ms Unit dBm 0 dBm 18.00000000 GHz SWT 49 ms Unit dBm 0 0 A A -10 -10 D1 -13 dBm D1 -13 dBm -20 -20 -30 IN1 -30 IN1 1MAX 1 1MA 1MAX 1MA -40 -401 -50 -50 TDF TDF -60 -60 -70 -70 -80 -80 -90 -90 -100 -100 Start 12.75 GHz 525 MHz/ Stop 18 GHz Start 18 GHz 850 MHz/ Stop 26.5 GHz Date: 6.FEB.2010 12:10:46 Date: 6.FEB.2010 12:17:12 12.75 GHz to 18 GHz 18 GHz to 26.5 GHz Note: These plots are pre-scans and for indication purposes only. For final measurements, see accompanying tables Page 22 of 24 RFI Global Services Ltd

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 6. Measurement Uncertainty No measurement or test can ever be perfect and the imperfections give rise to error of measurement in the results. Consequently the result of a measurement is only an approximation to the value of the measurand (the specific quantity subject to measurement) and is only complete when accompanied by a statement of the uncertainty of the approximation. The expression of uncertainty of a measurement result allows realistic comparison of results with reference values and limits given in specifications and standards. The uncertainty of the result may need to be taken into account when interpreting the measurement results. The reported expanded uncertainties below are based on a standard uncertainty multiplied by an appropriate coverage factor such that a confidence level of approximately 95% is maintained. For the purposes of this document “approximately” is interpreted as meaning “effectively” or “for most practical purposes”. Confidence Calculated Measurement Type Range Level (%) Uncertainty Effective Radiated Power (ERP) 728 - 763 MHz 95% ±2.94 dB Occupied Bandwidth 728 - 763 MHz 95% ±0.92ppm Conducted Spurious Emissions 9 kHz to 26.5 GHz 95% ± 2.62 dB Radiated Spurious Emissions 30 MHz to 1000 MHz 95% ±3.53 dB Radiated Spurious Emissions 30 MHz to 26.5 GHz 95% ±2.94 dB The methods used to calculate the above uncertainties are in line with those recommended within the various measurement specifications. Where measurement specifications do not include guidelines for the evaluation of measurement uncertainty the published guidance of the appropriate accreditation body is followed. RFI Global Services Ltd Page 23 of 24

TEST REPORT SERIAL NO: RFI/RPT2/RP77098JD03A ISSUE DATE: 04 MARCH 2010 Appendix 1. Test Equipment Used Cal. RFI Date Last Instrument Manufacturer Type No. Serial No. Interval No. Calibrated (Months) A1418 Attenuator HP N/A CSC21296 Calibrated - before use C1263 Cable Rosenberger FA210A1020005050 49316-01 29 Mar 2009 12 C151 Cable Rosenberger UFA210A-1-1181- None 20 Apr 2009 12 70x70 L1000 R&S SFU Rhode and 2110.250K02 100865 Calibrated - Schwarz before use M127 Spectrum Rohde & FSEB 30 842 10 Jul 2009 12 Analyser Schwarz 659/016 M166 Thermometer/ EuroCom None None 30 Apr 2009 12 Barometer/ Hygrometer NB In accordance with UKAS requirements all the measurement equipment is on a calibration schedule. Page 24 of 24 RFI Global Services Ltd


Document Created: 2010-03-04 14:58:28
Document Modified: 2010-03-04 14:58:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC