MPE

FCC ID: UP5-SC-MS33

RF Exposure Info

Download: PDF
FCCID_4189425

Lo CERPASS TECHNOLOGY (SUZHOU) CO., LTD Report No.: SEDL1811121 MPE Report According to FCC Part 2.1091 Applicant : ATBS Technology Co. Address : 3F., No.200, Ganggian Rd., Neihu District, Taipei City 11494, Taiwan. Manufacturer _: ATBS Technology Co. Address : 3F., No.200, Ganggian Rd., Neihu District, Taipei City 11494, Taiwan. Equipment : BLE TPMS Model No. : MS3XX, X=0—9, A—Z, az, or blank FCC ID : UP5—SC—MS33 Test Period : Nov.27, 2018~ Dec.24, 2018 M The test result refers exclusively to the test presented test model / sample., M Without written approval of CERPASS TECHNOLOGY (SUZHOU) CO., LTD. the test reportshall not be reproduced except in full M The EUT is also considered as a kind of computer peripheral, because the connection to computer is necessary for typical use. It has been verified to comply with the requirements of FCC Rules and Regulations Part 15. The test report has been issued separately. M The test report must not be used by the clients to claim product certification approval by any agency of the Government. Approved by: Laboratory Accreditation: Cerpass Technology Corporation Test Laboratory TAF LAB Code: 1439 Cerpass Technology (Suzhou) Co., Ltd. Miro Chueh EMC/RF Manager A2LA LAB Code: 4981.01 Cerpass Technology (Suzhou) Co., Ltd. Issued Date : Feb.27, 2019 Report format Revision 01 Page No. : 1 of 6

CERPASS TECHNOLOGY (SUZHOU) CO., LTD Report No.: SEDL1811121 Radio Frequency Exposure LIMIT For 2.4G Band: According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter. Cerpass Technology (Suzhou) Co., Ltd. Issued Date : Feb.27, 2019 Report format Revision 01 Page No. : 2 of 6

Lo CERPASS TECHNOLOGY (SUZHOU) CO., LTD Report No.: SEDL1811121 EUT Specification EuT BLE TPMS Frequency band J at a—dozon= — 2deo0n2 (Operating) [] WLAN: 5.150GHz ~ 5.250GHz [.] WLAN: 5.745GHz ~ 5.825GHz Device category [] Portable (<20om separation) Mobile (>200m separation) OccupalionaliGontraled exposure (5 — SmWiom®) Exposure classification EJ General PopulationUncontralled exposure 8=tmWen‘) TJ Single antenna [] Multcle antennas Antenna diversity CJ] Tx dversity [J] Ax diversity [] TwR dversity Max. output power for Node Power(dBm) Pewer (mW) 2.AG Band BLE —13.08 0.05 Antenna gain (Mex) OdBi {numeric anterna gain: 1) TJJ NPE Evaluation(Gee Remank 1) Evaluation applied C] SAR Evaluation [] NA Remark: 1. *: Simutancous fransmission is not applcable for this EUT [2— DTS device is not subject to routine AF evaluation; MPE estimate is used to justly the compliance. 3. Formobi or fiedfocation trensmiters, no SAR consideration appld. The maximum power density is 1.0 mWce even it the calculation incicates thatthe power density would be lerger Cergass Technology (Suzhou) Co, Lid. Issued Date Feb27, 2019 Report format Reviion 01 Page No 8ot6

CERPASS TECHNOLOGY (SUZHOU) CO., LTD Report No.: SEDL1811121 SAR exclusion Per FCC KDB 447498 D01v06 section 4.3: 1) For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison 5mm Test Separation Test separation Max. Tune-up Max. Tune-up Test SAR Test Test Mode Frq. (MHz) distance (mm) Power(dBm) Power(mW) threshold (Y/N) Bluetooth 2480 5 -13.08 0 0.02 N Cerpass Technology (Suzhou) Co., Ltd. Issued Date : Feb.27, 2019 Report format Revision 01 Page No. : 4 of 6

CERPASS TECHNOLOGY (SUZHOU) CO., LTD Report No.: SEDL1811121 TEST RESULTS No non-compliance noted. Calculation 30  P  G E2 Given E & S d 3770 Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 30  P  G S 3770d 2 Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields 30  P / 1000  G PG S  0.0796  Equation 1 3770  d / 100 2 d2 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 Cerpass Technology (Suzhou) Co., Ltd. Issued Date : Feb.27, 2019 Report format Revision 01 Page No. : 5 of 6

CERPASS TECHNOLOGY (SUZHOU) CO., LTD Report No.: SEDL1811121 Maximum Permissible Exposure Max. Power Modulation Frequency Max. Conducted Antenna Distance Limit Tune-up density 2 Mode band (MHz) output power(mW) gain (cm) 2 (mW/cm ) Power(mW) (mW/cm ) BLE 2402-2480 0.05 1.26 1 20 0.0003 1 Test engineer: Cerpass Technology (Suzhou) Co., Ltd. Issued Date : Feb.27, 2019 Report format Revision 01 Page No. : 6 of 6


Document Created: 2019-02-27 05:34:12
Document Modified: 2019-02-27 05:34:12
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC