User manual

FCC ID: UKCWRDP0B

Users Manual

Download: PDF
FCCID_3947674

Installation guide Panel reader Eng Installation guide 10 (25/64") D Installationsanleitung LIGHT AXIS E Guía de instalación Guide d'installation (3/16") F (1-5/8") 4 41 PANEL READER FIXING STICKER 30 P1825 (1-3/16") Length: 3m TM TM 3M SCOTCHLOK BUTT COVER CONNECTOR UY2 (X4) STICKER Eng Installation D Installation E Instalación F Installation 1 METAL 2-a 2-b 3 6 O5 4 5 6 ON ALIGNED 60 min. LIGHT AXIS . METAL min P1825 50 8m ax. Eng Application D Anwendung E Aplicación F Application METAL METAL European view All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any 1/3 225648 -ED0 -12/02/2018 item in this catalog, its design, construction, and/or materials. © 2018 SALTO Systems S.L.

Installation guide Panel reader Eng Electrical characteristics: Operation conditions Cable type and Power Consumption Note1 Min Max Unit max. distances Min Max Unit Temperature -22/-30 158/70 ºF/ºC Reader 150 mA Humidity 35 85 % Cable type Cable type Reader Reader Note 1: Installer must take this data into account RF characteristics UTP Cat5e 2 pairs 279ft AWG24 85m to dimension the CU42xx power supply. Min Cen. Unit Note 2: Not use with Scotchlock butt connector RFID frequency 13.56 Mhz UTP Cat5e 4 pairs 853ft AWG24 + 260m UY2. Bluetooth Smart 2.4 2.445 Ghz SP224861/SP224895 Note 2 frequency SALTO recommends to use on cable per wall Twisted pairs 1312ft reader. AWG18 400m D Elektronische Eigenschaften: Umgebungsbedingungen Verkabelung und max. Stromaufnahme Note1 Min Max Einheit entfernungen Min Max Einheit Temperatur -22/-30 158/70 ºF/ºC Reader 150 mA Feuchtigkeit 35 85 % Cable type Kabeltyp Reader Leser Note1: Bitte beachten Sie die Stromaufnahme bei RF Frequenzen UTP Cat5e 2 pairs 279ft AWG24 85m der Planung des Netzteils für die CU42xx. Min Cen. Unit Einheit Note2: Nicht verwenden mit den Scotchlok RFID frequenz 13.56 Mhz UTP Cat5e 4 pairs 853ft AWG24 + 260m Einzeladerverbinder UY2. Bluetooth Smart 2.4 2.445 Ghz SP224861/SP224895 Note 2 frequenz SALTO empfiehlt die Verwendung einer separaten Twisted pairs 1312ft Leitung je Wandleser. AWG18 400m E Características eléctricas: Condiciones ambientales Tipo de cable y Consumo Nota1 Min Max Unidad distancias max. Min Max Unidad Temperatura -22/-30 158/70 ºF/ºC Lector 150 mA Humedad 35 85 % Cable Cable type type Reader Lector Nota1:El instalador ha de tener en cuenta la RF characteristics UTP Cat5e 2 pairs 279ft AWG24 85m dimensión del alimentador de la CU42xx. Min Cen. Unit Unidad Nota2:No usar el conector Scotchlook butt UY2 Frecuencia RFID 13.56 Mhz UTP Cat5e 4 pairs 853ft AWG24 + 260m con este tipo de cable. Frecuencia 2.4 2.445 Ghz SP224861/SP224895 Note 2 SALTO recomienda utilizar un cable por cada lector Bluetooth Smart Twisted pairs 1312ft mural. AWG18 400m F Caractéristique électronique: Condition de fonctionnement Type de câble Consommation Note1 Min Max Unit Cable type Type de câble Reader Lecteur Min Max Unité Température -22/-30 158/70 ºF/ºC Reader 150 mA Humidité 35 85 % UTP Cat5e 2 pairs 279ft AWG24 85m Note1:L'installateur doit calculer l'alimentation RF characteristics UTP Cat5e 4 pairs 853ft nécessaire pour alimentere la CU42xx. Min Cen. Unit AWG24 + 260m Note2: Ne pas utiliser le connecteur Scotchlok UY2 Fréquence RFID 13.56 Mhz SP224861/SP224895 Note 2 Twisted pairs 1312ft avec ce type de câble. Fréquence 2.4 2.445 Ghz AWG18 400m SALTO recommande d'utiliser un câble pour Bluetooth Smart chaque lecteur mural. European view All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any 2/3 225648 -ED0 -12/02/2018 item in this catalog, its design, construction, and/or materials. © 2018 SALTO Systems S.L.

Installation guide Panel reader Eng Installation example D Installationsbeispiel E Ejemplo de instalación F Exemple d'installation Eng Only connect ti CU42xx D Nur für Steuereinheit CU42xx E Solo conectar a CU42xx F Connecter uniquement CU42xx Eng Same pair D Gleiches Paar E Mismo par Model: CU42E0 F Même paire Eng D E F Power Input: 12VDC-1A B Green Grün Verde Vert 12VDC Input GND ON B A A Yellow Gelb Amarillo Jaune READER 1 Black Schwarz Negro Noir - 12VDC Output (1A) + GND A B BUS485 B + TAMPER READER 2 A - + +V Red Rot Rojo Rouge - + NC TM IN1 TM - RL1 C 3M Scotchlok butt connector UY2. + IN2 NO Eng - + RL2 NC C Crimp with cap side down. IN3 3MTM ScotchlokTM butt Einzeladerverbinder - NO + NC - IN4 RL3 C D + - IN5 NO NC UY2. Mit der Kappe nach unten + - IN6 RL4 C NO E zusammendrücken. TM TM Ethernet 10Base-T Eng Only connect to CU42xx Conector 3M Scotchlok butt UY2. 100Base-TX D Nur für Steuereinheit CU42xx F Crimpar con la tapa hacia abajo. TM E Solo conectar a CU42xx Connecteur 3M Scotchlok TM butt UY2. F Connecter uniquement CU42xx Crêper avec le capuchon vers le bas. Eng Installation example with RJ45 Eng D FInstallationsbeispiel für RJ45 E Ejemplo de instalación RJ45 F Exemple d'installation avec RJ45 Eng Optional Eng Optional D Optioneel D Optioneel Model: CU4200 E Opcional E Opcional F Optionnelle SP224861 SP224895 F Optionnelle Power Input: 12VDC-1A 12VDC Input ON B GND A 12VDC Output (1A) READER 1 - + GND A B BUS485 B A + READER 2 - - TAMPER + Eng Red + NC IN1 - + IN2 RL1 C NO D Rot - NC + - IN3 RL2 C NO E Rojo + - IN4 RL3 NC C F Rouge + NO IN5 - + RL4 NC C Eng Black - IN6 NO D Schwarz E Negro F Noir Eng Minimum distance between readers 20in (50cm). D Mindestabstand zwischen Lesern 20in (50cm). E Distancia mínima entre los lectores 20in (50cm). F Distance minimale entre les lecteurs doit être de 20in (50cm). B A - + European view All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any 3/3 225648 -ED0 -12/02/2018 item in this catalog, its design, construction, and/or materials. © 2018 SALTO Systems S.L.

Installation guide Mullion reader Eng Installation guide D Installationsanleitung E Guía de instalación 34,5 15 (1-3/8") (19/32") F Guide d'installation TORX 20 (x2) (3-15/16") SELF-DRILLING SCREW (2-3/8") 100 60 TM 3M SCOTCHLOK TM BUTT CONNECTOR UY2 (X4) Eng Installation D Installation E Instalación F Installation 1 2 3 O8,5 max. 4 O3,5 max. European view All contents current at time of publication. 1/4 225647-ED.- 12/02/2018 SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. © 2018 SALTO Systems S.L.

Installation guide Mullion reader Eng Electrical characteristics: Operation conditions Cable type and Power Consumption Note1 Min Max Unit max. distances Min Max Unit Temperature -22/-30 158/70 ºF/ºC Reader 195 mA Humidity 35 85 % Cable type Cable type Reader Reader Note 1: Installer must take this data into account RF characteristics UTP Cat5e 2 pairs 213ft AWG24 65m to dimension the CU42xx power supply. Min Cen. Unit Note 2: Not use with Scotchlock butt connector RFID frequency 13.56 Mhz UTP Cat5e 4 pairs 656ft AWG24 + 200m UY2. Bluetooth Smart 2.4 2.445 Ghz SP224861/SP224895 Nota 2 frequency SALTO recommends to use on cable per wall Pares trenzados 984ft reader. AWG18 300m D Elektronische Eigenschaften: Umgebungsbedingungen Verkabelung und max. Stromaufnahme Note1 Min Max Einheit entfernungen Min Max Einheit Temperatur -22/-30 158/70 ºF/ºC Reader 195 mA Feuchtigkeit 35 85 % Cable type Kabeltyp Reader Leser Note1: Bitte beachten Sie die Stromaufnahme bei RF Frequenzen UTP Cat5e 2 pairs 213ft AWG24 65m der Planung des Netzteils für die CU42xx. Min Cen. Unit Einheit Note2: Nicht verwenden mit den Scotchlok RFID frequenz 13.56 Mhz UTP Cat5e 4 pairs 656ft AWG24 + 200m Einzeladerverbinder UY2. Bluetooth Smart 2.4 2.445 Ghz frequenz SP224861/SP224895 Nota 2 SALTO empfiehlt die Verwendung einer separaten Pares trenzados 984ft Leitung je Wandleser. AWG18 300m E Características eléctricas: Condiciones ambientales Tipo de cable y Consumo Nota1 Min Max Unidad distancias max. Min Max Unidad Temperatura -22/-30 158/70 ºF/ºC Lector 195 mA Humedad 35 85 % Cable Cable type type Reader Lector Nota1:El instalador ha de tener en cuenta la RF characteristics UTP Cat5e 2 pairs 213ft AWG24 65m dimensión del alimentador de la CU42xx. Min Cen. Unit Unidad Nota2:No usar el conector Scotchlook butt UY2 Frecuencia RFID 13.56 Mhz UTP Cat5e 4 pairs 656ft AWG24 + 200m con este tipo de cable. Frecuencia 2.4 2.445 Ghz SP224861/SP224895 Nota 2 SALTO recomienda utilizar un cable por cada lector Bluetooth Smart Pares trenzados 984ft mural. AWG18 300m F Caractéristique électronique: Condition de fonctionnement Type de câble Consommation Note1 Min Max Unit Cable type Type de câble Reader Lecteur Min Max Unité Température -22/-30 158/70 ºF/ºC Reader 195 mA Humidité 35 85 % UTP Cat5e 2 pairs 213ft AWG24 65m Note1:L'installateur doit calculer l'alimentation RF characteristics UTP Cat5e 4 pairs 656ft nécessaire pour alimentere la CU42xx. Min Cen. Unit AWG24 + 200m Note2: Ne pas utiliser le connecteur Scotchlok UY2 Fréquence RFID 13.56 Mhz SP224861/SP224895 Nota 2 Pares trenzados 984ft avec ce type de câble. Fréquence 2.4 2.445 Ghz AWG18 300m SALTO recommande d'utiliser un câble pour Bluetooth Smart chaque lecteur mural. European view All contents current at time of publication. 2/4 225647-ED.- 12/02/2018 SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. © 2018 SALTO Systems S.L.

Installation guide E Mullion reader Eng Installationexample D Installationsbeispiel E Ejemplo de instalación F Exemple d'installation Eng Only connect ti CU42xx D Nur für Steuereinheit CU42xx E Solo conectar a CU42xx F Connecter uniquement CU42xx TM TM 3M Scotchlok butt connector UY2. Eng Crimp with cap side down. TM TM 3M Scotchlok butt Einzeladerverbinder D UY2. Mit der Kappe nach unten zusammendrücken. E TM TM Conector 3M Scotchlok butt UY2. F Crimpar con la tapa hacia abajo. TM Connecteur 3M Scotchlok TM butt UY2. Crêper avec le capuchon vers le bas. Eng D E F B Green Grün Verde Vert A Yellow Gelb Amarillo Jaune Black Schwarz Negro Noir +V Red Rot Rojo Rouge Eng Same pair D Gleiches Paar E Mismo par F Même paire Model: CU42E0 Power Input: 12VDC-1A 12VDC Input ON B GND A READER 1 - 12VDC Output (1A) + GND A B BUS485 B A + READER 2 - - TAMPER + + NC - IN1 RL1 C + NO - IN2 NC + RL2 C - IN3 NO Eng Cable connection + NC - IN4 RL3 C D Verdrahtung + - IN5 NO NC E Cableado + - IN6 RL4 C NO F Câblage Ethernet 10Base-T 100Base-TX European view All contents current at time of publication. 3/4 225647-ED.- 12/02/2018 SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. © 2018 SALTO Systems S.L.

Installation guide Mullion reader Eng Installationexample with RJ45 F D Installationsbeispiel für RJ45 E Ejemplo de instalación RJ45 F F Exemple d'installation avec RJ45 Eng Optional Eng Optional D Optioneel D Optioneel Model: CU4200 E Opcional E Opcional F Optionnelle SP224861 SP224895 F Optionnelle Power Input: 12VDC-1A 12VDC Input ON B GND A READER 1 - 12VDC Output (1A) + GND A B BUS485 B A + READER 2 - - TAMPER + Eng Red + NC IN1 - + IN2 RL1 C NO D Rot - NC + - IN3 RL2 C NO E Rojo + - IN4 RL3 NC C F Rouge + - IN5 NO NC Eng Black + RL4 C - IN6 NO D Schwarz E Negro F Noir B A - + Eng Minimum distance between readers 20in (50cm). D Mindestabstand zwischen Lesern 20in (50cm). E Distancia mínima entre los lectores 20in (50cm). F Distance minimale entre les lecteurs doit être de 20in (50cm). European view All contents current at time of publication. 4/4 225647-ED.- 12/02/2018 SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. © 2018 SALTO Systems S.L.

Compliance PRODUCTS DESCRIPTION PRODUCT TECHNOLOGY SOFTWARE BLUETOOTH COMMERCIAL NAME MODEL RFID BLUETOOTH SMART CONTROL MODULE(S) XS4 Wall Reader 2.0 Panel WRDP0B x x 0152 0136 P1825 WRDP0J x x 0153 0136 XS4 Wall Reader 2.0 Mullion WRDM0B x x 0152 0136 P1826 WRDM0J x x 0153 0136 EU COMPLIANCE STATEMENT EN Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU (RED) and 2011/65/EU (RoHS). You will be able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com/certificate ES Por medio de la presente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain) declara que este equipo de control de accesos cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/UE (RED) y 2011/65/UE (RoHS). Podrá encontrar una copia de la declaración de conformidad original en la siguiente dirección de internet: http://www.saltosystems.com/certificate FR Par la présente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spai d la e ue l’appareil équipement pour le cont ôle d’a s est o fo e aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/UE (RED) et 2011/65/UE (RoHS). Vous pouvez télécharger une copie de la d la atio de o fo it o igi ale à t a e s l’ad esse sui a te: http://www.saltosystems.com/certificate DE Hiermit erklärt SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9-20180 Oiartzun-Spain) dass sich das Gerät Zutrittskontrollgeräte im Übereinstimmung mit den grundlegendenAnforderungen und den übrigen einschlägigen Bestimmungen derRichtlinie 2014/53/EU (RED) befindet und 2011/65/EU (RoHS). Eine Kopie der originalen Konformitätserklärung finden Sie auf der folgenden Internetseite: http://www.saltosystems.com/certificate NL Hierbij verklaart SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain) dat het toestel toegangscontroleapparatuur in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 2014/53/EU (RED) en 2011/65/EU (RoHS). U kunt een kopie van de originele verklaring van overeenstemming vinden op het volgende internetadres: http://www.saltosystems.com/certificate PT A SALTO Systems S.L. declara que este equipamento de controlo de acessos está conforme os requisitos essenciais e outras disposições da Diretiva 2014/53/UE (RED) e 2011/65/EU (RoHS). Poderá encontrar uma cópia da declaração de conformidade original na seguinte direção de internet: http://www.saltosystems.com/certificate ELECTRICAL WARNINGS Distance between this device and human body must be higher than 20 cm. FRECUENCY / OUTPUT MAXIMUM POWER TECHNOLOGY OPERATING FRECUENCY OUTPUT MAX. POWER RFID 13.56 MHz +25 dBm Bluetooth Smart 2400 – 2483.5 MHz +8 dBm / + 2.8 dBm MECHANICAL WARNINGS In order to confirm the correct operation of this electronic device, SALTO recommends using it in combination with a lock destined for that use (door mass, frequency of use, fire door, etc) and that is in good operational conditions. The SALTO product should be treated with care during the installation process to avoid any aggressive contact that may damage the unit. It may be necessary to loosen the trims mounting during installation. Do not bring the device into contact with oil, paints or acids. Do not paint the door with the mortise lock or electronic device already mounted on the door. CLEANING THE ELECTRONIC DEVICE: a damp cloth with mild soapy water can be used. Never use abrasive soaps or sprays. For best performance, stainless steel should be cleaned regularly. Note that when the door is closed without the lock having been already programmed, the lock will automatically lock and can only be opened with a Portable Programing Device (PPD). If you have questions or doubts on this, please contact your authorized SALTO supplier. SALTO SYSTEMS S.L. www.saltosystems.com 1/2 xxxxxx-ED.-14/12/2017 Pol. Lanbarren, c/Arkotz nº9, 20180 Oiartzun, Spain. All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.

Compliance LEGAL WARNINGS The user shall be responsible for the correct use and maintenance of the access control equipment according to the instructions herein. SALTO shall not be responsible for any defect, malfunction, loss or damage, whether direct or indirect, caused by or arisen from any improper installation or utilization of the equipment or which contravenes, transgresses or infringes in any manner the abovementioned instructions. SALTO’s lia ilit o e i g the e uip e t is li ited to the a anty provided. The warranty does not cover product failures due to repairs, modifications or product manipulations performed in the access control equipment or in the inner electromechanical structure by anyone other than authorized SALTO dealers or personnel. FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CANADIAN COMPLIANCE STATEMENT This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly app o ed the pa t espo si le fo o plia e ould oid the use ’s autho it to ope ate the e uip e t. Le présent appa eil est o fo e au CNR d’I dust ie Ca ada appli a les au appa eils adio e e pts de li e e. L’e ploitatio est auto is e aux deux conditions suivantes: l’appa eil e doit pas p odui e de ouillage, et l’utilisateu de l’appa eil doit a epte tout ouillage adio le t i ue su i, e si le ouillage est sus epti le d’e compromettre le fonctionnement. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to ICES-003. SALTO SYSTEMS S.L. www.saltosystems.com 2/2 xxxxxx-ED.-14/12/2017 Pol. Lanbarren, c/Arkotz nº9, 20180 Oiartzun, Spain. All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.


Document Created: 2018-07-19 08:41:34
Document Modified: 2018-07-19 08:41:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC