RF Exposure Information

FCC ID: UKCAE9W

RF Exposure Info

Download: PDF
FCCID_2331487

RF Exposure Evaluation MPE Evaluation The EUT is a wireless device used in stationary application, at least 20 cm from any body part of the user or nearby persons. For 2.4 GHz radio, the maximum Peak EIRP calculated is -6.4 dBm (0.23 mW); therefore, to comply with RF Exposure requirement, the MPE is calculated. The Power Density can be cacluated using the formula: S = EIRP/ 4πD2 Where: S is Power Density in W/m2 D is the distnace from the antenna It is cosidered that 20 cm is the minimum distance tht user can go closest to the EUT. At 20cm. S =0.00046 W/m2, which is below the MPE limit of 10 W/m2 This equipment consists of an additional RFID radio in conjunction with the 2.4 GHz radio, and supports simultaneous operation. The RFID field stregnth at 3m distance is 54.72dBµV/m. Equivalent to -40.58 dBm EIRP (0.000087mW). Per KDB# 447498 D01 General RF Exposure Guidance guidelines, simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modeled or measured field strengths or power density, is ≤ 1.0. The 2.4 GHz radio power density is 0.00046 W/m2 and RFID power density is 0.0000002 W/m2. The sum of the MPE ratios is ≤ 1.0. The EUT complies with the requirements of KDB# 447498 RF Exposure for simultaneous transmission operations.


Document Created: 2014-07-21 16:15:35
Document Modified: 2014-07-21 16:15:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC