Users Manual

FCC ID: UKCAE9W

Users Manual

Download: PDF
FCCID_2331478

Installation guide AELEMENT ANSI Lock AE i 0 xxx... series Eng Installation guide (NO electronic privacy ) E Guía de instalación F Guide d'installation 1" 1-25/32" (25.5) (45) 2-9/16" 19/32" (65) (15) 2-5/8" (67) 4-9/16" (116) ***** OUTSIDE INSIDE EXTERIOR INTERIOR EXTERIEUR INTERIEUR * Only for doors > 2-9/16" thickness * *Solo para puertas > 65mm de espesor *Uniquement pour portes > 65 mm d' épaisseur 5 6 9 7 8 10 Only SALTO spindle Solo cuadradillos SALTO Seulement carrés SALTO The mounting with other spindles voids the guaranty. El montaje de otros cuadradillos anula la garantia. Le montage d'autres carrés annulera le garantie. 11 Ou Ex tside ter ior 4 t* In Int side eri or 3 1 2 Recommendation for Customer’s lever set installation on SALTO AElement. See : 4MO01300 Recomendaciones para la instalación de manillas Cliente en SALTO AElement. NOTE: Screws and spindles are included in the box of the reader. Ver: 4MO01300 NOTA:Los tornillos y cuadradillos estan incluidos en la caja del lector. Recommandation pour l’installation des béquilles client sur Salto AElement. (mm) NOTE: Les vis et les carrés sont inclus dans la boite du lecteur. Voir: 4MO01300 220511-ED. 27/09/2012 Installation guide AELEMENT ANSI LOCK All contents current at time of publication. © 2011 SALTO Syst ems S.L. 1/4 SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.

Installation guide AELEMENT ANSI Lock 1 2 1,25" - 1.125" 4-3/4" 120,65 1,25" (32) -(28.6) (120.65) (32) 0,219" ) (19 LY OUTSIDE INSIDE (5,5) " ON 3/4 IDE C L O S IN 2-7/16" (61.9) (40.9) 1.61" (142.65) O3 5.616" (O1 /8" 4,875" 0) (124) C 3-1/2" (203.2) L 6-9/16" (166.7) (89) C OF OF L 8" LOCK STRIKE C L (42.45) 1.671" OF (60.85) (50.8) 2.395" LEVER 2" 1.625" (41) 1.125" (28.5) C L OF 1-1/8" LOCK INSIDE 1-1/16" MIN (O10 " O1 25) O3/8 (27) ) (28.6) (O " Cut Strike, Lock Case Mecanizado cerradero, caja cerradura 3 4 1/4" " (6.35) 2-3/4" /16 O9 14) 1-7/16" (70) (36.5) (O 16" OUTSIDE INSIDE O9/ 14) (O 8-5/16" (211.1) ø9/16"( ø14) HOLE (50.8) ONLY INSIDE 2" ø9/16 (ø14)AGUJERO SOLO POR EL INTERIOR C C L L OF OF LOCK LOCK C L OF LEVER C L OF LOCK TEMPLATE OUTSIDE PLANTILLA INSIDE EXTERIOR Eng NOTE FOR D RILLING MA RKS INTERIOR EXTERIEUR USE TEMPLATE ONLY BY INSIDE INTERIEUR E NOTA , PARA MARCAR LOS AGUJEROS USAR LA PLANTILLA SOLO POR EL INTERIOR F POUR MARQUER LES JOINTS DE PERÇAGE, N'UTILISER LE GABARIT QUE DU CÔTÉ INTERIEUR. The groove must be on the same side than the grub screw. 5 La ranura en el lado del prisionero. 6 La rainure doit être du côté de la vis Metal door Wood door Puerta metalica Puerta madera Porte metallique Porte en bois Only SALTO spindle Solo cuadradillos SALTO * CORTE CUT Seulement carrés SALTO INSIDE INTERIOR 220511-ED. 27/09/2012 Installation guide AELEMENT ANSI LOCK INTERIEUR * All contents current at time of publication. © 2011 SALTO Syst ems S.L. 2/4 SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.

Installation guide AELEMENT ANSI Lock 7 8 REMOVE QUITAR RETIRER INSIDE INTERIOR OUTSIDE INSIDE INTERIEUR EXTERIOR INTERIOR EXTERIEUR INTERIEUR = 9 10 2 = 1 Aligned OUTSIDE & INSIDE Screw driver Alinear PZ2 EXTERIOR - INTERIOR READER CABLE AT THIS PO INT DO NOT 11 12 CABLE LECTOR Eng CLOSE THE DOO R PROGRAM THE L OCK FIRST NO CIERRE L A PUERTA. Only LR03 E PROGRAMAR ANTES LA Batteries CERRADURA TÜRE NICHT S CHLIESSEN. WIRELESS CABLE D ZUERST SCHLOSS (OPTIONAL) PROGRAMMIEREN NE PAS FERMEZ LA P ORTE F DE PROGRAMMER L A SERRURE Fasten with screw to keep it aligned PRIMA DI CHIUDERE LA P ORTA, Fijar el tornillo para mantener el alineamiento I Fixer la vis pour assurer l'alignement . PROGRAMMARE LA LOCK CABLE SERRATURA CABLE CERRADURA follow user manual 13 a 14 b Screw driver Torx T10 TAMPER 220511-ED. 27/09/2012 Installation guide AELEMENT ANSI LOCK All contents current at time of publication. © 2011 SALTO Syst ems S.L. 3/4 SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.

Installation guide AELEMENT ANSI Lock AE i 1 xxx... series Eng Installation guide (With electronic privacy ) E Guía de instalación F Guide d'installation 1" (25.5) 1-25/32" 2-9/16" 19/32" (45) (65) (15) 2-5/8" (67) 4-9/16" (116) ***** * Only for doors > 2-9/16" thickness * *Solo para puertas > 65mm de espesor *Uniquement pour portes > 65 mm d' épaisseur OUTSIDE INSIDE EXTERIOR INTERIOR EXTERIEUR INTERIEUR 5 6 9 7 8 12 PRIVACY CABLE CABLE PRIVACIDAD 4 3 Only SALTO spindle Solo cuadradillos SALTO Seulement carrés SALTO NOTE: Screws and spindles are included in the box of the reader. The mounting with other spindles voids the guaranty. NOTA:Los tornillos y cuadradillos estan incluidos en la caja del lector. 1 El montaje de otros cuadradillos anula la garantia. 2 Le montage d'autres carrés annulera le garantie. NOTE: Les vis et les carrés sont inclus dans la boite du lecteur. Eng D Konformitätserklärung Hiermit erklärt Salto Systems S.L. (Pol. Lanbarren C/Arkotz, 9 – 20180 Oiartzun Declaration of conformity – Spanien – UID-Nr. B20708517), dass sich dieses Produkt in By means of the present Salto Systems S.L. (Pol. Lanbarren C/Arkotz, 9 - Übereinstimmung mit den grundlegenden Anforderungen und den relevanten 20180 Oiartzun - Spain - CIF B20708517), declares that this equipment fulfills Vorschriften der Richtline 1999/5/EG bzw. 89/336/EWG befindet. Die Kopie der the essential requirements and any other applicable or indispensable Konformitätserklärung im Originalwortlaut ist auf folgender Website zu finden: dispositions of the Directive 1999/5/CE or the Directive 89/336/EEC. You will be http: http://www.saltosystems.com able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com Alle Proximity-Modelle sind “Receiver class 3”. All proximity models are "Receiver class 3". I Dichiarazione di conformità Con la presente Salto Systems S.L (Pol.Lanbarren C/Arkotz, 9 – 20180 Oiartzun – Spain – CIF B20708517), dichiara che questa apparecchiatura è E Declaración de conformidad Por medio de la presente Salto Systems S.L. (Pol. Lanbarren C/Arkotz, 9 - 20180 conforme ai Oiartzun – Spain - CIF B20708517), declara que este equipo cumple con los requisiti essenziali ed a qualsiasi disposizione applicabile o esigibile in riferimento requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles alla direttiva 1999/5/CE e della direttiva 89/336/EEC. È possibile trovare una copia de la Directiva 1999/5/CE o la Directiva 89/336/EEC. Podrá encontrar una copia originale della dichiarazione di conformità al seguente indirizzo internet de la declaración de conformidad original en la siguiente dirección de Internet: http:/www.saltosystems.com http://www.saltosystems.com Tutti i modelli di prossimità sono “Receiver Class 3” Todos los modelos de proximidad son “Receiver class 3”. F Déclaration de conformité ONLY FOR PROXIMITY MODELS Par le biais de celle-ci, Salto Systems S.L. (Pol. Lanbarren C/Arkotz, 9 - 20180 This device complies with Part 15 of the FCC Rules and with Industry Oiartzun – Spain - CIF B20708517), déclare être conforme aux normes essentielles et Canada licence-exempt RSS standard(s). n’importe quelles autres dispositions applicable et exigibles des Directives 1999/5/CE Operation is subject to the following two conditions: (1) this device ou 89/336/EEC. Vous pourrez trouver une copie de la déclaration de conformité may not cause harmful interference, and (2) this device must originale sur le site internet suivant: http://www.saltosystems.com accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly Tous les modèles de proximité sont “Receiver class 3”. approved by the party responsible for compliance could void the user's authority to operate the equipment. 220511-ED. 27/09/2012 Installation guide AELEMENT ANSI LOCK All contents current at time of publication. © 2011 SALTO Syst ems S.L. 4/4 SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials. www.saltosystems.com

FCC Compliance Statements (FCCID: UKCAE9, UKCAE9W, UKCL90, UKCG90, UKCRPOE, UKCNRF, UKCR485, UKCA9XX, UKCA9XW) This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Canadian Compliance Statement (IC: 10088A-AE9, 10088A-AE9W, 10088A-L90, 10088A-G90, 10088A-RPOE, 10088A-NRF, 10088A-R485, 10088A-A9XX, 10088A-A9XW) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. EU Compliance Statement EN Hereby, Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC (R&TEE). You will be able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com/declarations ES Por medio de la presente Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain) declara que este equipo de control de accesos cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE (R&TEE). Podrá encontrar una copia de la declaración de conformidad original en la siguiente dirección de internet: http://www.saltosystems.com/declarations FR Par la présente Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain) déclare que l'appareil access control equipment est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/CE (R&TEE). You will be able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com/declarations DE Hiermit erklärt Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain), dass sich das Gerät access control equipment in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG (R&TEE). You will be able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com/declarations DU Hierbij verklaart Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain)dat het toestel access control equipment in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG (R&TEE). You will be able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com/declarations Mechanical Warnings In order to assure a good performance for the device, Salto recommends to use a certified mortise lock and make sure that it is in good condition. Do not knock the device while mounting, if necessary, loose the trims fixation. Do not bring the device into contact with oil, paints or acids. Do not paint the door with the mortise lock fixed to the door. CLEANING THE ELECTRONIC FURNITURE: You can use a damp cloth from soapy water. Never use abrassive soaps or sprays.It is important to clean stainless steel regularly. Legal Warnings SALTO shall not be liable for any losses, personal damages or claims arising out of, or in connection with t he wrong fitting of the cylinders o r bad programming that can cause blocking of entries and exits i.e. blocking entrance, exit of Injured or people in danger. Do you have the programming keys or management software (not included in this box)? If not, then take note that when the door is closed without having been programmed it will automatically lock, and can only be opened with a Portable Programing Device. If in any doubt, please contact your supplier or visit our Web site: www.saltosystems.com According to the fourth point on the SALTO SYSTEMS LIMITED WARRANTY document, the warranty does not cover product failures due to repair installations, modifications or improper service performed by non-Salto authorised persons. The user is not allowed to disassemble the inner electromechanic structure in the SALTO furniture. (for instance, loosening the torx screws) In the case of a user intended intervention at the inner parts, the user will lose any warranty right from SALTO. N20371 Copyright © 2013 SALTO Systems ED0 - 221405


Document Created: 2014-07-21 09:54:38
Document Modified: 2014-07-21 09:54:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC