RF test report_BT

FCC ID: UIDW31

Test Report

Download: PDF
FCCID_4146032

I seonron I cas. FCC RADIO TEST REPORT Report No. : FR842742—01AC FCC RADIO TEST REPORT FCC ID : UIDW31 Equipment : Wireless Router Brand Name : ARRIS Model Name : W31, W30 Applicant : ARRIS 3871 Lakefield Drive Suite 300,Suwanee, Georgia, 30024 United States Manufacturer : ARRIS 3871 Lakefield Drive Suite 300,Suwanee, Georgia, 30024 United States Standard : 47 CFRFCC Part 15.247 The product was received on Jul. 18, 2018, and testing was started from Dec. 21, 2018 and completed on Dec. 24, 2018. We, SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.10—2013 and shown compliance with the applicable technical standards. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any agency of government. The test results in this variant report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Approved by: Sam Chen SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886—3—656—9065 Page Number ; 1 of 18 FAX : 886—3—656—9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version _: 01

FCC RADIO TEST REPORT Report No. : FR842742-01AC Table of Contents History of this test report .................................................................................................................................3 Summary of Test Result...................................................................................................................................4 1 General Description .............................................................................................................................5 1.1 Information..............................................................................................................................................5 1.2 Testing Applied Standards .....................................................................................................................9 1.3 Testing Location Information ..................................................................................................................9 1.4 Measurement Uncertainty ......................................................................................................................9 2 Test Configuration of EUT .................................................................................................................10 2.1 The Worst Case Measurement Configuration ......................................................................................10 2.2 EUT Operation during Test ..................................................................................................................11 2.3 Accessories ..........................................................................................................................................11 2.4 Support Equipment...............................................................................................................................11 2.5 Test Setup Diagram .............................................................................................................................12 3 Transmitter Test Result .....................................................................................................................14 3.1 AC Power-line Conducted Emissions ..................................................................................................14 3.2 Emissions in Restricted Frequency Bands...........................................................................................16 4 Test Equipment and Calibration Data ..............................................................................................18 Appendix A. Test Results of AC Power-line Conducted Emissions Appendix B. Test Results of Emissions in Restricted Frequency Bands Appendix C. Test Photos Photographs of EUT v01 TEL : 886-3-656-9065 Page Number : 2 of 18 FAX : 886-3-656-9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR842742-01AC History of this test report Report No. Version Description Issued Date FR842742-01AC 01 Initial issue of report Jan. 07, 2019 TEL : 886-3-656-9065 Page Number : 3 of 18 FAX : 886-3-656-9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR842742-01AC Summary of Test Result Report Ref Std. Result Test Items Remark Clause Clause (PASS/FAIL) 1.1.2 15.203 Antenna Requirement PASS - 3.1 15.207 AC Power-line Conducted Emissions PASS - 3.2 15.247(d) Emissions in Restricted Frequency Bands PASS - Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: 1. The test configuration, test mode and test software were written in this test report are declared by the manufacturer. 2. The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Reviewed by: Sam Chen Report Producer: Cindy Peng TEL : 886-3-656-9065 Page Number : 4 of 18 FAX : 886-3-656-9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR842742-01AC 1 General Description 1.1 Information 1.1.1 RF General Information Frequency Range (MHz) Bluetooth Version Ch. Frequency (MHz) Channel Number 2400-2483.5 BR / EDR 2402-2480 0-78 [79] Band Mode BWch (MHz) Nant 2.4-2.4835GHz BT-BR(1Mbps) 1 1TX 2.4-2.4835GHz BT-EDR(2Mbps) 1 1TX 2.4-2.4835GHz BT-EDR(3Mbps) 1 1TX Note:  Bluetooth BR uses a GFSK (1Mbps).  Bluetooth EDR uses a combination of π/4-DQPSK (2Mbps) and 8DPSK (3Mbps).  Bluetooth BR/EDR uses as a system using FHSS modulation.  BWch is the nominal channel bandwidth.  Nss-Min is the minimum number of spatial streams.  Nant is the number of outputs. e.g., 2(2, 3) means have 2 outputs for port 2 and port 3. 2 means have 2 outputs for port 1 and port 2. TEL : 886-3-656-9065 Page Number : 5 of 18 FAX : 886-3-656-9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR842742-01AC 1.1.2 Antenna Information Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 PEGATRON RFPCA2620-01_Rev02 Dual band PCB dipole antenna I-PEX 2 PEGATRON RFPCA2620-02_Rev02 Dual band PCB dipole antenna I-PEX 3 PEGATRON RFPCA2620-03_Rev01 Dual band PCB dipole antenna I-PEX 4 PEGATRON RFPCA2620-04_Rev02 Dual band PCB dipole antenna I-PEX 5 PEGATRON RFPCA2307-02 Rev02 PCB dipole antenna I-PEX Note 6 PEGATRON RFPCA2211-03 Rev01 PCB dipole antenna I-PEX 7 PEGATRON RFPCA2211-04 Rev02 PCB dipole antenna I-PEX 8 PEGATRON RFPCA1806-03 Rev01 PCB dipole antenna I-PEX 9 PEGATRON RFPCA3508-05_Rev02 PCB antenna I-PEX 10 PEGATRON RFPCA1806-03 Rev01 PCB dipole antenna I-PEX Note: Uncorrelated (dBi) Correlated (dBi) (dBi) Ant. Port 5GHz Band 5GHz Band 5GHz Band 5GHz Band 2.4GHz 2.4GHz Bluetooth 1~2 3~4 1~2 3~4 1 1 4.22 5.71 - 5.35 6.23 - 2 2 4.22 5.71 - 5.35 6.23 - 3 3 4.22 5.71 - 5.35 6.23 - 4 4 4.22 5.71 - 5.35 6.23 - 5 1 - - 5.82 - - 6.93 - 6 2 - - 5.82 - - 6.93 - 7 3 - - 5.82 - - 6.93 - 8 4 - - 5.82 - - 6.93 - 9 1 - - - - - - 4.12 10 - - 5.23 5.23 - - - - Note 1: The above information was declared by manufacturer. Note 2: The EUT has ten antennas. For Radio 1 WLAN 2.4GHz Functions For IEEE 802.11b/g/n/ac/ax mode (4TX, 4RX): Port 1, Port 2, Port 3 and Port 4 could transmit/receive simultaneously. WLAN 5GHz Functions (1RX): Ant. 10 only supports the antenna receive function. TEL : 886-3-656-9065 Page Number : 6 of 18 FAX : 886-3-656-9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR842742-01AC For Radio 3 WLAN 5GHz Band 1~2 Functions For IEEE 802.11a/n/ac/ax mode (4TX, 4RX): Port 1, Port 2, Port 3 and Port 4 could transmit/receive simultaneously. For Radio 2 WLAN 5GHz Band 3~4 Functions For IEEE 802.11a/n/ac/ax mode (4TX, 4RX): Port 1, Port 2, Port 3 and Port 4 could transmit/receive simultaneously. For Radio 4 Bluetooth Functions (1TX, 1RX): Only Port 1 could transmit/receive simultaneously. 1.1.3 Table for Radio Type Radio No. 2.4GHz 5GHz Band 1~2 5GHz Band 3~4 Bluetooth Radio 1 V Only RX function Only RX function - Radio 2 - - V - Radio 3 - V - - Radio 4 - - - V 1.1.4 EUT Operational Condition EUT Power Type From power adapter Test Software Version Telnet v1.27.2 1.1.5 Table for EUT Functions Type of Function 2.4GHz 5GHz Band 1~2 5GHz Band 3~4 Master (AP Router) V V V Master (Extender) - - V Bridge (Client without radar detection) - - V Client without radar detection - - V 1.1.6 Table for Multiple Listing The model names in the following table are all refer to the identical product. Model Name Color of Device’s Bottom W31 Matte Black W30 Silver From the above models, model name “W31” was selected as representative model for the test and its data was recorded in this report. TEL : 886-3-656-9065 Page Number : 7 of 18 FAX : 886-3-656-9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR842742-01AC 1.1.7 Table for Class II Change This product is an extension of original one reported under Sporton project number: FR842742AC Below is the table for the change of the product with respect to the original one. Modifications Performance Checking 1. AC Power-line Conducted Emissions. 1. Adding an adapter (Model Name: NBS42D120350VU). 2. Emissions in Restricted Frequency Bands Below 1GHz. 2. Adding the 802.11ax mode for WLAN 2.4GHz and WLAN 5GHz. 3. Adding the 160MHz. 4. Adding the WLAN 5GHz band 2 and band 3 (5250~5350 MHz, 5470~5725 MHz) for this device. 5. Updating the WIFI chip (BCM43684KRFBG) version to It doesn't need to verify Bluetooth test. B1 from A1. The difference between A1 (original) and B1 (new) as below: (1) No functional RF changes versus A1. (2) MAC/PHY related bug fixes and optimizations. (3) Power and yield optimizations. 6. Updating the 802.11ac data rate and data modulation of WLAN 2.4GHz to “MCS 0-11, 1024QAM” from “MCS It doesn't affect the test result. 0-9, 256QAM”. 7. Adding the Master (Extender), Bridge (Client without radar detection) and Client without radar detection It doesn't need to verify RF test. modes for WLAN 5GHz band 3 and band 4 (5470~5725 MHz, 5725~5850 MHz). 8. Changing the internal structure of housing. 9. Changing the housing color to black from white. 10. Removing USB port. 11. Changing the equipment name to “Wireless Router” It does not affect the test. from “W31”. Based on the modification above. 12. Adding a new model name “W30” which the color of device’s bottom is silver. TEL : 886-3-656-9065 Page Number : 8 of 18 FAX : 886-3-656-9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR842742-01AC 1.2 Testing Applied Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  47 CFR FCC Part 15  FCC KDB 558074 D01 v05 1.3 Testing Location Information Testing Location HWA YA ADD : No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886-3-327-3456 FAX : 886-3-327-0973 JHUBEI ADD : No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. TEL : 886-3-656-9065 FAX : 886-3-656-9085 Test Condition Test Site No. Test Engineer Test Environment Test Date Radiated Below 1GHz 03CH01-CB Stim Sung 22°C / 54% Dec. 24, 2018 AC Conduction CO02-CB Ryo Fan 22°C / 58% Dec. 21, 2018 Test site Designation No. TW0006 with FCC. Test site registered number IC 4086D with Industry Canada. 1.4 Measurement Uncertainty ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2) Test Items Uncertainty Remark Conducted Emission (150kHz ~ 30MHz) 2.0 dB Confidence levels of 95% Radiated Emission (30MHz ~ 1,000MHz) 3.6 dB Confidence levels of 95% TEL : 886-3-656-9065 Page Number : 9 of 18 FAX : 886-3-656-9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR842742-01AC 2 Test Configuration of EUT 2.1 The Worst Case Measurement Configuration The Worst Case Mode for Following Conformance Tests Tests Item AC power-line conducted emissions Condition AC power-line conducted measurement for line and neutral CTX There are four modes as below: Mode 1: EUT - Radio 1 (WLAN 2.4GHz) Operating Mode Mode 2: EUT - Radio 3 (WLAN 5GHz Band 1~2) Mode 3: EUT - Radio 2 (WLAN 5GHz Band 3~4) Mode 4: EUT - Radio 4 (Bluetooth) The worst case was found from Mode 2 of original test. So the measurement will follow this same test configuration. 1 EUT - Radio 3 (WLAN 5GHz Band 1~2) + Adapter 2 The Worst Case Mode for Following Conformance Tests Tests Item Emissions in Restricted Frequency Bands Test Condition Radiated measurement If EUT consist of multiple antenna assembly (multiple antenna are used in EUT regardless of spatial multiplexing MIMO configuration), the radiated test should be performed with highest antenna gain of each antenna type. CTX There are four modes as below: Mode 1: EUT in Y axis - Radio 1 (WLAN 2.4GHz) Operating Mode < 1GHz Mode 2: EUT in Y axis - Radio 3 (WLAN 5GHz Band 1~2) Mode 3: EUT in Y axis - Radio 2 (WLAN 5GHz Band 3~4) Mode 4: EUT in Y axis - Radio 4 (Bluetooth) The worst case was found from Mode 1 of original test. So the measurement will follow this same test configuration. 1 EUT in Y axis - Radio 1 (WLAN 2.4GHz) + Adapter 2 The Worst Case Mode for Following Conformance Tests Tests Item Simultaneous Transmission Analysis - Co-location RF Exposure Evaluation Operating Mode Radio 1 (WLAN 2.4GHz) + Radio 3 (WLAN 5GHz Band 1~2) + Radio 2 (WLAN 1 5GHz Band 3~4) + Radio 4 (Bluetooth) Refer to Sporton Test Report No.: FA842742-01 for Co-location RF Exposure Evaluation. Note 1: The EUT can only be used at Y axis position. TEL : 886-3-656-9065 Page Number : 10 of 18 FAX : 886-3-656-9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR842742-01AC 2.2 EUT Operation during Test The EUT was programmed to be in continuously transmitting mode. 2.3 Accessories Accessories Equipment No. Brand Name Model Name P/N Rating Name INPUT: 100-120V ~, 60Hz, 0.9A Max 1 Adapter 1 APD WA-36L12FU AREP05681 OUTPUT: 12V, 3A NBS42D120 INPUT: 100-120V ~, 50/60Hz, 1.0A 2 Adapter 2 NetBit AREP05751 350VU OUTPUT: 12.0V, 3.5A 2.4 Support Equipment For Test Site No: CO02-CB Support Equipment No. Equipment Brand Name Model Name FCC ID 1 NB DELL E6430 N/A For Test Site No: 03CH01-CB Support Equipment No. Equipment Brand Name Model Name FCC ID 1 NB DELL E4300 N/A TEL : 886-3-656-9065 Page Number : 11 of 18 FAX : 886-3-656-9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR842742-01AC 2.5 Test Setup Diagram Test Setup Diagram – AC Line Conducted Emission Test Item Connection Shielded Length 1 Power cable No 1.8m 2 RJ-45 cable No 10m 3 RJ-45 cable*3 No 1.5m TEL : 886-3-656-9065 Page Number : 12 of 18 FAX : 886-3-656-9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR842742-01AC Test Setup Diagram - Radiated Test Item Connection Shielded Length 1 Power cable No 1.8m 2 RJ-45 cable No 10m TEL : 886-3-656-9065 Page Number : 13 of 18 FAX : 886-3-656-9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR842742-01AC 3 Transmitter Test Result 3.1 AC Power-line Conducted Emissions 3.1.1 AC Power-line Conducted Emissions Limit AC Power-line Conducted Emissions Limit Frequency Emission (MHz) Quasi-Peak Average 0.15-0.5 66 - 56 * 56 - 46 * 0.5-5 56 46 5-30 60 50 Note 1: * Decreases with the logarithm of the frequency. 3.1.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. 3.1.3 Test Procedures Test Method  Refer as ANSI C63.10-2013, clause 6.2 for AC power-line conducted emissions. TEL : 886-3-656-9065 Page Number : 14 of 18 FAX : 886-3-656-9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR842742-01AC 3.1.4 Test Setup AC Power-line Conducted Emissions 1—Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 cm to 40 cm long. 2—The I/O cables that are not connected to an accessory shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. 3—EUT connected to one LISN. Unused LISN measuring port connectors shall be terminated in 50 Ω loads. LISN may be placed on top of, or immediately beneath, reference ground plane. 3.1—All other equipment powered from additional LISN(s). 3.2—A multiple-outlet strip may be used for multiple power cords of non-EUT equipment. 3.3—LISN at least 80 cm from nearest part of EUT chassis. 4—Non-EUT components of EUT system being tested. 5—Rear of EUT, including peripherals, shall all be aligned and flush with edge of tabletop. 6—Edge of tabletop shall be 40 cm removed from a vertical conducting plane that is bonded to the ground plane. 7—Antenna can be integral or detachable. If detachable, then the antenna shall be attached for this test. 3.1.5 Test Result of AC Power-line Conducted Emissions Refer as Appendix A TEL : 886-3-656-9065 Page Number : 15 of 18 FAX : 886-3-656-9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR842742-01AC 3.2 Emissions in Restricted Frequency Bands 3.2.1 Emissions in Restricted Frequency Bands Limit Restricted Band Emissions Limit Frequency Range (MHz) Field Strength (uV/m) Field Strength (dBuV/m) Measure Distance (m) 0.009~0.490 2400/F(kHz) 48.5 - 13.8 300 0.490~1.705 24000/F(kHz) 33.8 - 23 30 1.705~30.0 30 29 30 30~88 100 40 3 88~216 150 43.5 3 216~960 200 46 3 Above 960 500 54 3 Note 1: Test distance for frequencies at or above 30 MHz, measurements may be performed at a distance other than the limit distance provided they are not performed in the near field and the emissions to be measured can be detected by the measurement equipment. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor of 20 dB/decade (inverse of linear distance for field-strength measurements, inverse of linear distance-squared for power-density measurements). Note 2: Test distance for frequencies at below 30 MHz, measurements may be performed at a distance closer than the EUT limit distance; however, an attempt should be made to avoid making measurements in the near field. When performing measurements below30 MHz at a closer distance than the limit distance, the results shall be extrapolated to the specified distance by either making measurements at a minimum of two or more distances on at least one radial to determine the proper extrapolation factor or by using the square of an inverse linear distance extrapolation factor (40 dB / decade). The test report shall specify the extrapolation method used to determine compliance of the EUT. Note 3: Using the distance of 1m during the test for above 18 GHz, and the test value to correct for the distance factor at 3m. 3.2.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. 3.2.3 Test Procedures Test Method  The average emission levels shall be measured in [hopping duty factor].  Refer as ANSI C63.10; clause 6.10.3 band-edge testing shall be performed at the lowest frequency channel and highest frequency channel within the allowed operating band.  For the transmitter unwanted emissions shall be measured using following options below:  Refer as ANSI C63.10, clause 4.1.4.2.1 QP value.  Refer as ANSI C63.10, clause 4.1.4.2.2 measurement procedure peak.  Refer as ANSI C63.10, clause 4.1.4.2.4 average value of hopping pulsed emissions. TEL : 886-3-656-9065 Page Number : 16 of 18 FAX : 886-3-656-9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR842742-01AC 3.2.4 Test Setup Emissions in Restricted Frequency Bands 9kHz ~30MHz 30MHz~1GHz 3.2.5 Emissions in Restricted Frequency Bands (Below 30MHz) All amplitude of spurious emissions that are attenuated by more than 20 dB below the permissible value has no need to be reported. The radiated emissions were investigated from 9 kHz or the lowest frequency generated within the device, up to the 10 harmonic or 40 GHz, whichever is appropriate. 3.2.6 Test Result of Emissions in Restricted Frequency Bands Refer as Appendix B TEL : 886-3-656-9065 Page Number : 17 of 18 FAX : 886-3-656-9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR842742-01AC 4 Test Equipment and Calibration Data Calibration Calibration Instrument Manufacturer Model No. Serial No. Characteristics Remark Date Due Date Conduction LISN Schwarzbeck NSLK 8127 8127650 9kHz ~ 30MHz Nov. 21, 2018 Nov. 20, 2019 (CO02-CB) Conduction LISN Schwarzbeck NSLK 8127 8127478 9kHz ~ 30MHz Nov. 05, 2018 Nov. 04, 2019 (CO02-CB) Conduction EMI Receiver Agilent N9038A MY52260140 9kHz ~ 8.4GHz Jan. 17, 2018 Jan. 16, 2019 (CO02-CB) 0.15MHz ~ Conduction COND Cable Woken Cable 2 Nov. 06, 2018 Nov. 05, 2019 30MHz (CO02-CB) Conduction Software Audix E3 6.120210n - N.C.R. N.C.R. (CO02-CB) Radiation Loop Antenna Teseq HLA 6120 24155 9kHz - 30 MHz Mar. 16, 2018 Mar. 15, 2019 (03CH01-CB) BILOG ANTENNA TESEQ & CBL6112D & 37880 & Radiation 20MHz ~ 2GHz Aug. 27, 2018 Aug. 26, 2019 with 6dB Attenuator EMCI N-6-06 AT-N0609 (03CH01-CB) Radiation Pre-Amplifier EMCI EMC330N 980332 20MHz ~ 3GHz May 02, 2018 May 01, 2019 (03CH01-CB) Radiation Spectrum analyzer R&S FSP40 100080 9kHz~40GHz Oct. 03, 2018 Oct. 02, 2019 (03CH01-CB) Radiation EMI Test Receiver R&S ESCS 100359 9kHz ~ 2.75GHz Jul. 03, 2018 Jul. 02, 2019 (03CH01-CB) Low Radiation RF Cable-low Woken N/A 30 MHz ~ 1 GHz Oct. 08, 2018 Oct. 07, 2019 Cable-16+17 (03CH01-CB) Note: Calibration Interval of instruments listed above is one year. N.C.R. means Non-Calibration required. TEL : 886-3-656-9065 Page Number : 18 of 18 FAX : 886-3-656-9085 Issued Date : Jan. 07, 2019 Report Template No.: CB Ver1.0 Report Version : 01

AC Power-line Conducted Emissions Result Appendix A Summary Mode Result Type Freq Level Limit Margin Factor Condition (Hz) (dBuV) (dBuV) (dB) (dB) Mode 1 Pass AV 280.5k 22.55 50.80 -28.25 10.05 Neutral SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory Page No. : 1 of 3

seontom can. mmaane Mode 1 &7 LimP® [ To PC IA/ s uma[ s w [A ) Fal 5 zo 10— 0 & 1 the tth Tpe h Tevl ~Limk Margin Facer Condiion Comment Raw —AF commurs t (an en (@) ) Cmm ) ) & (rrask aset cies gsze 1006 Line — 1935 oo as se7 w wask zen sies ard 1006 line > resr on ons ser o amse —(rero sace oane toos Line > reos —loor on (ser ay amse aiis sese on_ toos line > mas oor on (ser o mes mm eore ons food line > rers loor ons (ser w mesk mise soze ards 1004 Line > mas loor ons (ser o asee asze sere onie roo% Line > isan loor on (ser ay asee reas aare saaso roon Lie en en oan ons nar o arem iist soco 2e tozr line > 13s oms |om sms w areem tosr soco 4033 tozr Line > oas —lars —|om —sms o sazeam reco enc ar9n 1oag line > Teo lom —|omn ass w rareom mar 3000 sees 1040 line > ose —lom —|oz ass

seontom can. mmaane Mode 1 &7 LimP® [ To4 re [A s uma[ s w [A ) a 5 2o 10— 0 1 tth Tpe h Tevl ~Limk Margin Facer Condiion Comment Raw —AF commurs t (an en (@) ) Cmm ) ) & [oosk 2805 cior 3u9e 1006 Newtal > 168 o5 on se7 w roosk 2220 siot 3i 1006 Newtal > Tess oos on ser o rx mers eace uns 1006 Newal . rer0 loos one ser w aik ruas sace 3tes 1006 Newal > mas ons on ser o mask reas soso on24 1005 Newal > roar loos ons (ser ay aease aass soso sagas toos Newal Weee teso oos on3 9a7 o mm mas seoo zar Tott Newal mse ons {ore ser w Tss 1es0 dsoo 2000 101 Newal _ ars —loos —|oie sar o nazom zose seno usds 109 Newall — roas loos ons (see w rezam rosr as0o azss 1000 Newtal _.> sae —lom on lsee o imazam inge —eoco 4220 1036 Newall — Te —loae —|ozs sse w isazem 1ogs 5000 391 1036 Newtal > ass —loas —|ozs sse o mamh rear soco 41B 1057 Newal / Tro —|oas —|oas sar w mamM mse —so00 3648 1057 Newal _ ass ogs |ozs sar

RSE below 1GHz Result Appendix B RSE below 1GHz Result Operating Mode 1 Polarization Vertical Operating Function CTX Note 1: “>20dB” means emission levels that exceed the level of 20 dB below the applicable limit. Note 2: “N/F” means Nothing Found emissions (No emissions were detected.) SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory Page No. : 1 of 2

RSE below 1GHz Result Appendix B RSE below 1GHz Result Operating Mode 1 Polarization Horizontal Operating Function CTX Note 1: “>20dB” means emission levels that exceed the level of 20 dB below the applicable limit. Note 2: “N/F” means Nothing Found emissions (No emissions were detected.) SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory Page No. : 2 of 2


Document Created: 2019-03-23 22:13:59
Document Modified: 2019-03-23 22:13:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC