users manual

FCC ID: UG9UBHS-LC1

Users Manual

Download: PDF
FCCID_689851

UBHS-LC1 User Manual 11. Our product satisfies Bluetooth Core Specification Version 2.0. Some Bluetooth devices may not be compatible with your headset. For further information about Table of Contents compatibility, please contact the concerned manufacturer, or our customer Caution service center. Package Content Headquarter Customer Service Center Features Company’s Indemnification Ubixon Co., Ltd. Wearing the Headset Manufacturers, Retailers, Agencies are not responsible for any bodily harm, intentional 1344-29 Jungdong B/D 2F, Charging the Headset damages and damages caused by lack of care. Seocho-dong Seocho-gu Seoul, Korea Storing the Headset This User’s Manual was written based on present product specification. TEL: +82-2-582-1115 Pairing All specification may be modified without prior notification. FAX: +82-2-582-0115 Using the Headset to Make Calls e-mail: support@ubixon.net Using the Headset to Listen to Music Package Content http://www.ubixon.net 3D Sound LCD Screen Messages Troubleshooting Headset Specification Caution 1. Do not put the headset near a fire. There is danger of explosion. Headset USB Cable (for recharging) Manual 2. Do not drop or apply excessive force to the headset. It might cause damage. 3. In case of malfunction, do not try to repair yourself. Please contact nearest service center immediately. Features 4. If the headset gets wet, avoid any heat or electrical current, and contact our A/S center or the place of purchase immediately. 5. Keep out of children’s reach. 6. Do not use chemical products (ex: Bleach) to clean the product. 7. Do not use any unauthorized charging device. 8. When storing the product for an extended period of time, store in a dry place and avoid extreme temperatures. 9. In order to avoid any danger caused by radio interference, do not use the headset where its use is forbidden. (1) Right Earphone : Outputs right side sound. 10. If you use any medical device (pacemaker, hearing aids etc…), please consult (2) Left Earphone : Outputs left side sound. the manufacturer of your device to make sure that the correct functioning of (3) Microphone : Intakes the sound. your medical device is not affected by RF energy emitted by the Bluetooth (4) LCD Screen : Information about headset’s status will be displayed Headset. Your doctor may be able to assist you in obtaining this information. (5) 2 Colors LED : Indicates headset’s status.

(6) Power Switch : Use to turn the device on/off. Please fully recharge the battery before first use. (7) USB Port : Allows connecting provided USB cable for recharging. Charging Method: (8) Receivers : Outputs the sound. 1. Turn off the headset. (9) Volume Up : While talking/listening to music, push the button as indicated 2. Use the provided USB Cable to recharge the headset. to increase volume. ※ The average charging time is 2 hours. (10) Volume Down : While talking/listening to music, pull the button as indicated 3. Red LED light flashes when charging and blue light flashes when charging is to lower volume. complete. (11) Talk/3D Sound : Press down the button to start a call, or to choose a 3D 4. Disconnect the headset from the USB cable once the charging is complete. sound effect. 5. When the battery level is low, ‘LOW BATT’ message will appear on LCD screen, (12) Backward : While listening to music, pull the button as indicated to play accompanied by a warning sound the past track. Press and hold the button to rewind (13) Forward/End call : While listening to music, push the button as indicated to play ※Continuous Talk/Music/Standby time: 10Hours/9Hours/150Hours the next track. Press and hold the button to forward. (This data was measured based on manufacturer’s standard. Actual use time may While talking on the phone, push the button as indicated to vary depending on the condition of use) end a call. (14) Play/Pause : While listening to music, press down the button to Caution: Play/Pause. Press and hold the button to terminate playback. 1. Do not use unauthorized charging device. 2. Disconnect the headset from the USB cable once the charging is complete. 3. Battery must be stored between 0℃ ~ 40℃. Wearing the Headset 4. You may not use the headset while it is charging. You can experience innovative portability thanks to Ubixon’s patent technology. 5. The battery included in the headset is an expandable product. Therefore, the life time of the battery will diminish in time. Storing the Headset 1. Please turn off your headset and store in a safe place. 2. Please avoid extreme low/high temperatures and direct sun light when storing the headset. It could diminish the battery life and cause damage to your headset. 3. Please store your headset and other in-box items in a dry place, far from any watery devices. When carrying the headset when talking/listening to music Pairing You MUST pair the headset with any new Bluetooth device before the first use. This step creates a unique link between two Bluetooth devices which allows the use Charging the Headset of the headset without repeating the pairing process for the future use. This product uses a rechargeable Li-Polymer battery. The pairing process may vary depending on the Bluetooth devices. Please consult

- Additional Page - G Caution Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, Including interference that may cause undesired operation. Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/ tv technician for help. G

the device’s user guide for further instruction. Push the ‘End Talk’ button to end the call. Pairing Method: If the person you are talking to hang up first, the call will be automatically 1. Turn off the headset. terminated. 2. Turn on the headset WHILE holding the ‘Talk’ button. Refuse Call 3. While ‘Pairing’ message appears on the LCD screen, release the ‘Talk’ button. When receiving a call, push the ‘End Talk’ button to refuse the call. -> ‘Reject’ -> The standby sound emitted once every 5 seconds indicates that the headset message will appear on LCD screen. is now in Pairing Mode. ※ In order to use this function, your phone must support the ‘Hands free’ profile. ※ The pairing must be completed within 60 seconds. After that, the pairing Transfer Call from Phone to Headset mode will be terminated and you must repeat from step 1. 1. To transfer a call from the phone to the headset, press the ‘Talk’ key -> ‘To 4. Use the phone/MP3 player to search for Bluetooth devices. (Please consult your H.set’ message will appear on LCD screen. phone/MP3 player’s user manual.) 2. Pressing the ‘Talk’ button again will transfer the call from the headset to the 5. Select “Lubix Stereo Headset” among the discovered Bluetooth devices. phone. -> ‘To Phone’ message will appear on LCD screen. 6. When prompted for password, enter 0000. Volume Level 7. ‘Connected’ message will appear on the LCD screen if pairing has been While talking or listening to music, use ‘+’ / ‘-’ buttons to adjust the volume level. successful. -> Volume level is indicated by numbers between 0 and 15. ※ If ‘FailedConn.’ message appears, try again from step 1. Using the Headset to Listen to Music Play/Pause 1. Check to make sure that your headset and your Bluetooth device are paired. If Using the Headset to Make Calls not, you must pair the devices first. (See our pairing section). If the devices are Make Call paired, and the headset was the last device connected to your phone (or MP3 1. Make a new call: enter the desired phone number on your phone, and press player), then pressing any button on the headset will connect your headset to ‘Talk’ button on your headset to start a new call. the counter Bluetooth device. 2. Redial last number: When the ‘Talk’ button is pressed, the last dialed number 2. Launch the music player on your Bluetooth device. will appear on your phone. Pressing the ‘Talk’ button again will connect you to 3. Press ‘▶’ button on the headset to start listening to music. that number. -> ‘Play’ message will appear on LCD screen. 3. Voice dial: Pressing and holding the ‘Talk’ button will launch the voice dialing 4. Use ‘▌▌’ button to pause and ‘▶’ button to resume play. service. -> ‘Play/Pause’ message will appear on LCD screen. ※ In order to use the voice dialing service, your phone must support Volume Level HandsFree profile. Please consult your phone manual for further information. While talking or listening to music, use ‘+’ / ‘-’ buttons to adjust the volume level. Answer Call -> Volume level is indicated by numbers between 0 and 15. 1. When you receive a call, you will hear a ring tone on your headset, and the Song Selection caller’s number will appear on the LCD screen Use ‘|◀◀’ / ‘▶▶|’ buttons to backward/forward songs. 2. Press any button on your headset to answer the call. Answering Call While Listening to Music End Call 1. When you receive a call, music will stop and you will hear a ring tone on your

headset with caller’s number appearing on LCD screen. Phone call related 3D Sound related 2. Press any button to answer the call. Redial Redialing the last number Normal 3. When the call ends, music will resume playing. Phone Num. Caller's phone number Xome Please consult 3D Sound 4. Pressing the ‘End Talk’ button will reject the call, and the music playback will Connected Starting a call Live section of this manual for resume. Disconn. Ending a call Wide details ※ In order to use this function, your phone must support the ‘Hands free’ profile. Reject Refusing to answer a call Mex To H.set Transfer call from phone to headset Battery related To Phone Transfer call from headset to phone Low Batt battery level is low 3D Sound 0~15 Volume level Thanks to our 3D sound technology, you can now enjoy exciting sounds. The following will explain the 4 types of 3D sound that this product supports. Selecting 3D Sound effect Troubleshooting While in Play/Pause mode, press ‘Talk’ button to choose the 3D sound effect of This headset is designed to automatically go off when the your choice. I cannot turn battery level is low. Please recharge your headset before Types of 3D Sound Effect my headset on. using. 3D Sound Effects are programmed in the following order. Each time the ‘Talk’ button is pressed, the next effect will be in use. The name of the effect in use will appear The battery included in the headset is an expandable product. on LCD screen. I don’t get as much Therefore, the operating time of the battery will diminish in 1) Normal: No 3D Sound Effect is applied. talk time as I used to. time. 2) XOME: Sound moves out from head and ears. Feels like using speakers while ※ Battery life will defer depending on the condition of use. using earphones (comfortable listening.) 3) LIVE: Reverberation, live sound as in a concert hall. In order to pair your headset with another device, the device 4) WIDE: Natural and soft reverberation effect with early reflections. must support Bluetooth Headset Profile, or Handsfree Profile. 5) MEX: 3D Spatialization and Bass Boost Therefore, you cannot pair the headset with devices such as regular cordless phones. I cannot pair my Our product satisfies Bluetooth Core Specification Version 2.0. headset to other Some Bluetooth devices may not be compatible with your devices LCD Screen Messages headset. For further information about compatibility, please Message Headset Status Message Headset Status contact the concerned manufacturer, or our customer service UBIXON Headset turned on Music related center. Pairing related Play Music is playing Pairing Searching for connection Play/Pause Headset is in pause mode - The working distance for this headset is 10m from the B.T Conn Trying to connect Backward Searching track backward source. Please make sure you are within this distance. The sound often FailedConn. Connection failed Forward Searching track forward ※ In presence of obstacles (ex: wall) between the source breaks. Connected Connection successful Stop Music is stopped and the headset, the working distance may diminish. Disconn. Connection disabled 0~15 Volume level - Machines such as cordless phones and wireless network

emit radio waves and may interfere with the headset. Please use your headset far from these devices whenever it is possible. My headset doesn’t Please turn off your headset for few seconds before using work correctly. again. ※ For any other problem, please contact our A/S Center, or the place of purchase. Headset Specification Bluetooth Version: V2.0 Class 2 Supported profiles: A2DP, AVRCP, HSP, HFP Frequency spectrum: 2.4GHz Spectrum Operating temperature: -20 ~ +70℃ Operating Time: Talk 10Hours / Music 9Hours Standby time: 150 Hours Working distance: 10m Product Size: 38 x 42 x 13 mm Product Weight: 28g Utility Model 20-0411968 호 Registration Number Patent Application PCT/KR2006/001796 Number


Document Created: 2006-08-03 09:47:46
Document Modified: 2006-08-03 09:47:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC