RF Exposure Exhibit

FCC ID: UFE-ALT240ROB

RF Exposure Info

Download: PDF
FCCID_2910054

TUV Rheinland 762 Park Ave., Youngsville, NC 27596 FCC ID: UFE-ALT240ROB Tel: (919) 554-3668, Fax: (919) 554-3542 RF Exposure - FCC EUT Name: Braava EUT Model: 240jet, 240 FCC ID: UFE-ALT240ROB FCC Title 47, Part 15C, ANSI C63.10:2009 Prepared for: Stephen Pallotta iRobot Corporation 8 Crosby Drive Bedford, MA 01730 USA Tel: 781-430-3284 Fax: 781-430-3999 Prepared by: TUV Rheinland of North America 762 Park Avenue Youngsville, NC 27596 Tel: (919) 554-3668 Fax: (919) 554-3542 http://www.tuv.com/ Report/Issue Date: 11 February 2016 Report Number: Supplement to 31552090.001 - RF Exposure for FCC Report Number: Supplement to 31552090.001 - RF Exposure for FCC Page 1 of 3 EUT: Braava Model: 240jet, 240

TUV Rheinland 762 Park Ave., Youngsville, NC 27596 FCC ID: UFE-ALT240ROB Tel: (919) 554-3668, Fax: (919) 554-3542 1 RF Exposure 1.1 Exposure Requirements – FCC 1.1.1 Test Procedure If the antenna is located > 20cm from the user, then an MPE calculation is acceptable. If the antenna is located < 20cm (portable / mobile / hand-held device) from the user, then SAR evaluation is required. 1.1.2 Evaluation The EUT will be used as a portable device where the antenna could be located less than 20cm from the user, therefore a SAR evaluation is required. 1.1.2.1 SAR Evaluation for FCC FCC KDB # 447498 DO1 V05r02 - Mobile and Portable Device RF Exposure and Procedures and Equipment, Appendix A shows that the SAR Test Exclusion Threshold for a device with a separation distance of 5 mm at 2450 MHz is 10 mW. The minimum power that requires SAR testing with a separation distance of 5mm at 2.445 GHz is 10 mW. The maximum EiRP peak power output of the EUT is: 0.323 mW (See calculation next page). The 0.323 mW EiRP of the EUT is well below the 10 mW power level that requires SAR Testing. 1.1.3 Conclusion The EUT is within the SAR Test Exclusion Threshold. SAR testing is not required for FCC. Note: The 0.323 mW eirp peak power level includes the 100% Duty Cycle factor. This is considered to be the absolute worst case. Report Number: Supplement to 31552090.001 - RF Exposure for FCC Page 2 of 3 EUT: Braava Model: 240jet, 240

TUV Rheinland 762 Park Ave., Youngsville, NC 27596 FCC ID: UFE-ALT240ROB Tel: (919) 554-3668, Fax: (919) 554-3542 1.1.4 Calculated EiRP Level Notes: The EUT does not have a means to make direct measurements. This EiRP calculation was made using the maximum Peak value in section 4.1.5.1 of the test report (Page 11) which is 90.32 dBµV/m at 3m. (Duty Cycle was set at 100% for testing) Per the equation in section 1.3.1 of FCC Document # 412172 D01 Determining ERP and EiRP v01; EiRP = pt x gt = (E x d)2 / 30, where: pt = transmitter output power in watts, gt = Numeric gain of transmitting antenna (unit-less) = 1, (90.32dBµV / 20) E = electric field strength in V/m; E = 10 / 106 = 0.0328 V/m, d = measurement distance in meters; d = 3m, EiRP = (0.0328 x 3)2 / 30 = 0.000323 Watts or 0.323 mW or -4.91 dBm 1.1.1 Antenna Gain: For this equation, the antenna was set to a gain of 0 dBi or numeric gain of 1 (unity gain) in order to take into account the transmitter output power and gain for eirp equivalence. Based on this equation, the stated Maximum peak EiRP of the EUT is 0.323 mW or -4.91 dBm, using 100% Duty Cycle. Report Number: Supplement to 31552090.001 - RF Exposure for FCC Page 3 of 3 EUT: Braava Model: 240jet, 240


Document Created: 2016-02-11 15:55:16
Document Modified: 2016-02-11 15:55:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC