MPE Calculation

FCC ID: UDX-60079010

RF Exposure Info

Download: PDF
FCCID_4121875

RF Exposure Report Report No.: SA180704E03 FCC ID: UDX-60079010 Test Model: MR45-HW Received Date: July 04, 2018 Test Date: Oct. 09 to 11, 2018 Issued Date: Dec. 24, 2018 Applicant: Cisco Systems, Inc. Address: 170 West Tasman Drive, San Jose, CA 95134 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location : E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / 723255 / TW2022 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA180704E03 Page No. 1 / 7 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 6 2.5 Calculation Result of Maximum Conducted Power ............................................................................. 7 Report No.: SA180704E03 Page No. 2 / 7 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued SA180704E03 Original release. Dec. 24, 2018 Report No.: SA180704E03 Page No. 3 / 7 Report Format Version: 6.1.1

1 Certificate of Conformity Product: 4x4 802.11a/b/g/n/ac/ax Access Point Brand: Cisco Test Model: MR45-HW Sample Status: ENGINEERING SAMPLE Applicant: Cisco Systems, Inc. Test Date: Oct. 09 to 11, 2018 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Dec. 24, 2018 Mary Ko / Specialist Approved by : , Date: Dec. 24, 2018 May Chen / Manager Report No.: SA180704E03 Page No. 4 / 7 Report Format Version: 6.1.1

2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time 2 (MHz) Strength (V/m) Strength (A/m) (mW/cm ) (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 2 1.34-30 824/f 2.19/f (180/f )* 30 30-300 27.5 0.073 0.2 30 300-1500 … … f/1500 30 1500-100,000 … … 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula 2 Pd = (Pout*G) / (4*pi*r ) where 2 Pd = power density in mW/cm Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 33cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA180704E03 Page No. 5 / 7 Report Format Version: 6.1.1

2.4 Antenna Gain WLAN Directional gain table – 4TX Directional Antenna Gain Frequency range (GHz) Antenna Type Antenna Connector (dBi) 2.4 ~ 2.4835 7.74 5.15 ~ 5.25 8.40 PIFA i-pex(MHF) 5.725 ~ 5.85 8.11 WLAN Directional gain table – 2TX Frequency range Antenna Combine Directional Antenna Antenna Type Antenna Connector (GHz) Type Gain (dBi) 2.4 ~ 2.4835 2.4G Ant. 1+4 6.12 5.15 ~ 5.25 5.15G Ant. 1+3 6.62 PIFA i-pex(MHF) 5.725 ~ 5.85 5.85G Ant. 3+4 7.27 Bluetooth antenna spec. Antenna Net Gain (dBi) Frequency range (GHz) Antenna Type Antenna Connector 4.24 2.4 ~ 2.4835 PIFA i-pex(MHF) Note: More detailed information, please refer to operating description. Report No.: SA180704E03 Page No. 6 / 7 Report Format Version: 6.1.1

EooE 0 ueonre 2.5 Calculation Result of Maximum Conducted Power Operation E;/:Iuaetrl]zn Max Power Antenna Gain Distance |Power Density Limit Mode (I\C}ILIJ-IZ) Y (mW) (dBi) (cm) (mW/icm?) (mW/icm?) WLAN 2.4GHz 33 0.37869 1 (41X) 2437 872.013 7.74 WLAN 2.4GHz 33 0.15072 1 (218) 2437 503.965 6.12 WLA(';I%SGHZ 2437 258.226 3.70 33 0.04423 1 WLAN 5GHz 0.28944 1 (UNII1}4TX 5200 572.519 8.40 33 WLAN 5GHz 33 0.10371 1 (UNIHIH1}—2TX 5200 309.064 6.62 WLAN 5GHz 0.03997 1 (UNIIH}A1TX 5200 214.783 4.06 33 WLAN 5GHz (UNII—3)—4TX 5745 996.654 8.11 33 0.47131 1 WLAN 5GHz 33 0.23950 1 (UNIl—3)—2TX 5825 614.522 7.27 WLAN 5GHz 0.05505 1 (UNIl—3)1TX 5785 266.686 4.51 33 BT—LE 2402 4.083 4.24 33 0.00079 1 Note: The Max . Power = Max. tune up power including tolerance. Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ...... etc. < 1 CPD = Calculation power density LPD = Limit of power density WLAN 2.4GHz + WLAN 5GHz + Bluetooth = 0.37869 / 1 + 0.47131 / 1 + 0.00079 / 1 = 0.85079 Therefore the maximum calculations of above situations are less than the "1" limit. ——— END ——— Report No.: $A180704E03 Page No. 7/ 7 Report Format Version: 6.1.1


Document Created: 2019-03-23 17:22:19
Document Modified: 2019-03-23 17:22:19
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC