Transmit Simultaneous Report

FCC ID: UDX-60079010

Test Report

Download: PDF
FCCID_4121874

Supplemental “Transmit Simultaneously” Test Report Report No.: RF180704E03-3 FCC ID: UDX-60079010 Test Model: MR45-HW Received Date: July 04, 2018 Test Date: Aug. 29 to 30, 2018 Issued Date: Dec. 24, 2018 Applicant: Cisco Systems, Inc. Address: 170 West Tasman Drive, San Jose, CA 95134 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / 723255 / TW2022 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF180704E03-3 Page No. 1 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.1.1 Test Mode Applicability and Tested Channel Detail ............................................................................ 11 3.2 Description of Support Units ............................................................................................................. 13 3.2.1 Configuration of System under Test .................................................................................................. 14 4 Test Types and Results ...................................................................................................................... 16 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 16 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 16 4.1.2 Test Instruments ................................................................................................................................ 17 4.1.3 Test Procedures ................................................................................................................................. 18 4.1.4 Deviation from Test Standard ............................................................................................................ 18 4.1.5 Test Setup .......................................................................................................................................... 19 4.1.6 EUT Operating Conditions................................................................................................................. 20 4.1.7 Test Results ....................................................................................................................................... 21 4.2 Conducted Emission Measurement .................................................................................................. 24 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 24 4.2.2 Test Instruments ................................................................................................................................ 24 4.2.3 Test Procedures ................................................................................................................................. 25 4.2.4 Deviation from Test Standard ............................................................................................................ 25 4.2.5 Test Setup .......................................................................................................................................... 25 4.2.6 EUT Operating Conditions................................................................................................................. 25 4.2.7 Test Results ....................................................................................................................................... 26 5 Pictures of Test Arrangements .......................................................................................................... 28 Appendix – Information on the Testing Laboratories ................................................................................ 29 Report No.: RF180704E03-3 Page No. 2 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

Release Control Record Issue No. Description Date Issued RF180704E03-3 Original release. Dec. 24, 2018 Report No.: RF180704E03-3 Page No. 3 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

1 Certificate of Conformity Product: 4x4 802.11a/b/g/n/ac/ax Access Point Brand: Cisco Test Model: MR45-HW Sample Status: ENGINEERING SAMPLE Applicant: Cisco Systems, Inc. Test Date: Aug. 29 to 30, 2018 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) 47 CFR FCC Part 15, Subpart E (Section 15.407) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Dec. 24, 2018 Mary Ko / Specialist Approved by : , Date: Dec. 24, 2018 May Chen / Manager Report No.: RF180704E03-3 Page No. 4 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

2 Summary of Test Results 47 CFR FCC Part 15, Subpart C, E (SECTION 15.247, 15.407) FCC Test Item Result Remarks Clause 15.207 Meet the requirement of limit. AC Power Conducted PASS Minimum passing margin is -4.71dB at 15.407(b)(6) Emission 0.37656MHz. 15.205 / 15.209 / 15.247(d) Radiated Emissions and Band Meet the requirement of limit. Edge Measurement PASS Minimum passing margin is -6.9dB at 15.407(b) 85.41MHz. (1/2/3/4(i/ii)/6) 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) Conducted Emissions at mains ports 150kHz ~ 30MHz 1.84 dB Radiated Emissions up to 1 GHz 30MHz ~ 1GHz 5.53 dB 1GHz ~ 6GHz 5.08 dB Radiated Emissions above 1 GHz 6GHz ~ 18GHz 4.98 dB 18GHz ~ 40GHz 5.19 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF180704E03-3 Page No. 5 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

3 General Information 3.1 General Description of EUT Product 4x4 802.11a/b/g/n/ac/ax Access Point Brand Cisco Test Model MR45-HW Status of EUT ENGINEERING SAMPLE Power Supply Rating 12Vdc from power adapter or 55Vdc from PoE WLAN: CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM Modulation Type 256QAM for OFDM in 11ac mode and VHT (20/40) mode in 2.4GHz 1024QAM for OFDMA in 11ax HE mode BT-LE: GFSK WLAN: DSSS, OFDM, OFDMA Modulation Technology BT-LE: DTS WLAN: 802.11b: up to 11Mbps 802.11a/g: up to 54Mbps Transfer Rate 802.11n: up to 600Mbps 802.11ac: up to 1733.3Mbps 802.11ax: up to 2401.9Mbps BT-LE: Up to 1Mbps WLAN: 2.4GHz: 2.412 ~ 2.462GHz Operating Frequency 5GHz: 5.18~ 5.24GHz, 5.745 ~ 5.825GHz BT-LE: 2.402 ~ 2.480GHz WLAN: 2.4GHz: 802.11b, 802.11g, 802.11n (HT20), VHT20, 802.11ax (HE20): 11 802.11n (HT40), VHT40, 802.11ax (HE40): 7 5GHz: Number of Channel 802.11a, 802.11n (HT20), 802.11ac (VHT20), 802.11ax (HE20): 9 802.11n (HT40), 802.11ac (VHT40), 802.11ax (HE40): 4 802.11ac (VHT80), 802.11ax (HE80): 2 802.11ac (VHT80+80), 802.11ax (HE80+80): 1 set BT-LE: 40 Antenna Type Refer to Note Antenna Connector Refer to Note Accessory Device Adapter x 1 (option) Data Cable Supplied NA Report No.: RF180704E03-3 Page No. 6 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

Note: 1. The EUT has below radios as following table: Radio 1 Radio 2 Radio 3 Radio 4 WLAN (2.4GHz) WLAN (5GHz) 2.4GHz / 5GHz Scanning (only RX) Bluetooth 2. Simultaneously transmission condition. Condition Technology 1 WLAN (2.4GHz) WLAN (5GHz) Bluetooth Note: The emission of the simultaneous operation has been evaluated and no non-compliance was found. 3. The EUT must be supplied with a power adapter or POE as following table: Adapter (Option) No. Brand Model No. Spec. Input: 100-240Vac, 0.8A, 50/60Hz 1 UMEC MA-PWR-30W-US Output: 12Vdc, 2.5A DC Output cable: Unshielded, 1.4m Input: 100-240Vac, 1.0A, 50/60Hz 2 Ktec KSAS0361200250HU Output: 12Vdc, 2.5A DC Output cable: Unshielded, 1.8m POE (Only for test not for sale) No. Brand Model No. Spec. Input: 100-240Vac, 1.5A, 50-60Hz 1 CISCO MA-INJ-5 Output: 55Vdc, 0.63A Input: 100-240Vac, 0.67A, 50/60Hz 2 CISCO MA-INJ-4 Output: 55Vdc, 0.6A Note: 1. From the above conditions, the conducted emissions worse case was found in POE No. 1. Therefore only the test data of the mode was recorded in this report. 2. From the above conditions, the radiated emissions worse case was found in Adapter No. 2. Therefore only the test data of the mode was recorded in this report. Report No.: RF180704E03-3 Page No. 7 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

4. The antennas provided to the EUT, please refer to the following table: WLAN Directional gain table – 4TX Directional Antenna Gain Frequency range (GHz) Antenna Type Antenna Connector (dBi) 2.4 ~ 2.4835 7.74 5.15 ~ 5.25 8.40 PIFA i-pex(MHF) 5.725 ~ 5.85 8.11 WLAN Directional gain table – 2TX Frequency range Antenna Combine Directional Antenna Antenna Type Antenna Connector (GHz) Type Gain (dBi) 2.4 ~ 2.4835 2.4G Ant. 1+4 6.12 5.15 ~ 5.25 5.15G Ant. 1+3 6.62 PIFA i-pex(MHF) 5.725 ~ 5.85 5.85G Ant. 3+4 7.27 Bluetooth antenna spec. Antenna Net Gain (dBi) Frequency range (GHz) Antenna Type Antenna Connector 4.24 2.4 ~ 2.4835 PIFA i-pex(MHF) Note: More detailed information, please refer to operating description. Report No.: RF180704E03-3 Page No. 8 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

5. The EUT incorporates a MIMO function. Radio 1 - 2.4GHz Band MODULATION MODE DATA RATE (MCS) TX & RX CONFIGURATION 802.11b 1 ~ 11Mbps 4TX 4RX 802.11g 6 ~ 54Mbps 4TX 4RX MCS 0~7 4TX 4RX MCS 8~15 4TX 4RX 802.11n (HT20) MCS 16~23 4TX 4RX MCS 24~31 4TX 4RX MCS 0~7 4TX 4RX MCS 8~15 4TX 4RX 802.11n (HT40) MCS 16~23 4TX 4RX MCS 24~31 4TX 4RX MCS 0~8, Nss=1 4TX 4RX MCS 0~8, Nss=2 4TX 4RX VHT20 MCS 0~9, Nss=3 4TX 4RX MCS 0~8, Nss=4 4TX 4RX MCS 0~9, Nss=1 4TX 4RX MCS 0~9, Nss=2 4TX 4RX VHT40 MCS 0~9, Nss=3 4TX 4RX MCS 0~9, Nss=4 4TX 4RX MCS 0~11, Nss=1 4TX 4RX MCS 0~11, Nss=2 4TX 4RX 802.11ax (HE20) MCS 0~11, Nss=3 4TX 4RX MCS 0~11, Nss=4 4TX 4RX MCS 0~11, Nss=1 4TX 4RX MCS 0~11, Nss=2 4TX 4RX 802.11ax (HE40) MCS 0~11, Nss=3 4TX 4RX MCS 0~11, Nss=4 4TX 4RX Radio 2 - 5GHz Band MODULATION MODE DATA RATE (MCS) TX & RX CONFIGURATION 802.11a 6 ~ 54Mbps 4TX 4RX MCS 0~7 4TX 4RX MCS 8~15 4TX 4RX 802.11n (HT20) MCS 16~23 4TX 4RX MCS 24~31 4TX 4RX MCS 0~7 4TX 4RX MCS 8~15 4TX 4RX 802.11n (HT40) MCS 16~23 4TX 4RX MCS 24~31 4TX 4RX MCS 0~8, Nss=1 4TX 4RX MCS 0~8, Nss=2 4TX 4RX 802.11ac (VHT20) MCS 0~9, Nss=3 4TX 4RX MCS 0~8, Nss=4 4TX 4RX MCS 0~9, Nss=1 4TX 4RX MCS 0~9, Nss=2 4TX 4RX 802.11ac (VHT40) MCS 0~9, Nss=3 4TX 4RX MCS 0~9, Nss=4 4TX 4RX MCS 0~9, Nss=1 4TX 4RX MCS 0~9, Nss=2 4TX 4RX 802.11ac (VHT80) MCS 0~9, Nss=3 4TX 4RX MCS 0~9, Nss=4 4TX 4RX Report No.: RF180704E03-3 Page No. 9 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

802.11ac MCS 0~9, Nss=1 2TX+2TX 2RX+2RX (VHT80+VHT80) MCS 0~9, Nss=2 2TX+2TX 2RX+2RX MCS 0~11, Nss=1 4TX 4RX MCS 0~11, Nss=2 4TX 4RX 802.11ax (HE20) MCS 0~11, Nss=3 4TX 4RX MCS 0~11, Nss=4 4TX 4RX MCS 0~11, Nss=1 4TX 4RX MCS 0~11, Nss=2 4TX 4RX 802.11ax (HE40) MCS 0~11, Nss=3 4TX 4RX MCS 0~11, Nss=4 4TX 4RX MCS 0~11, Nss=1 4TX 4RX MCS 0~11, Nss=2 4TX 4RX 802.11ax (HE80) MCS 0~11, Nss=3 4TX 4RX MCS 0~11, Nss=4 4TX 4RX 802.11ax MCS 0~11, Nss=1 2TX+2TX 2RX+2RX (HE80+HE80) MCS 0~11, Nss=2 2TX+2TX 2RX+2RX Note: 1. All of modulation mode support beamforming function except 802.11a/b/g modulation mode. 2. The EUT support Beamforming and non-beamforming mode, therefore both mode were investigated and the worst case scenario was identified. The worst case data were presented in test report. 3. The modulation and bandwidth are similar for 802.11n mode for 20MHz (40MHz) and 802.11ac/ax mode for 20MHz (40MHz/80MHz), therefore investigated worst case to representative mode in test report. Radio 3 - Scanning (only RX) 2.4GHz MODULATION MODE RX CONFIGURATION 802.11b 1RX 802.11g 1RX 802.11n (HT20) 1RX 802.11n (HT40) 1RX VHT20 1RX VHT40 1RX 5GHz MODULATION MODE RX CONFIGURATION 802.11a 1RX 802.11n (HT20) 1RX 802.11n (HT40) 1RX 802.11ac (VHT20) 1RX 802.11ac (VHT40) 1RX 802.11ac (VHT80) 1RX 6. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF180704E03-3 Page No. 10 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

3.1.1 Test Mode Applicability and Tested Channel Detail EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE1G RE<1G PLC - √ √ √ 4TX (PLC: POE mode; RE: adapter mode) RE1G: Radiated Emission above 1GHz & Where RE<1G: Radiated Emission below 1GHz Bandedge Measurement PLC: Power Line Conducted Emission NOTE: 1. The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on X-plane (below 1GHz) & Z-plane (above 1GHz). Radiated Emission Test (Above 1GHz): Following channel(s) was (were) selected for the final test as listed below. Non-Beamforming Mode AVAILABLE MODULATION MODE TESTED CHANNEL MODULATION TYPE CHANNEL TECHNOLOGY 802.11g 1 to 11 6 OFDM BPSK + 36 to 48 802.11ax (HE20) 149 OFDMA BPSK 149 to 165 + BT-LE 0 to 39 0 - GFSK Radiated Emission Test (Below 1GHz): Following channel(s) was (were) selected for the final test as listed below. Non-Beamforming Mode AVAILABLE MODULATION MODE TESTED CHANNEL MODULATION TYPE CHANNEL TECHNOLOGY 802.11g 1 to 11 6 OFDM BPSK + 36 to 48 802.11ax (HE20) 149 OFDMA BPSK 149 to 165 + BT-LE 0 to 39 0 - GFSK Power Line Conducted Emission Test: Following channel(s) was (were) selected for the final test as listed below. Non-Beamforming Mode AVAILABLE MODULATION MODE TESTED CHANNEL MODULATION TYPE CHANNEL TECHNOLOGY 802.11g 1 to 11 6 OFDM BPSK + 36 to 48 802.11ax (HE20) 149 OFDMA BPSK 149 to 165 + BT-LE 0 to 39 0 - GFSK Report No.: RF180704E03-3 Page No. 11 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

Test Condition: INPUT POWER APPLICABLE TO ENVIRONMENTAL CONDITIONS TESTED BY (System) RE1G 23deg. C, 67%RH 120Vac, 60Hz Weiwei Lo RE<1G 22deg. C, 68%RH 120Vac, 60Hz Frank Chuang PLC 25deg. C, 75%RH 120Vac, 60Hz Frank Chuang Report No.: RF180704E03-3 Page No. 12 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

3.2 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Laptop DELL E6420 B92T3R1 FCC DoC Provided by Lab B. POE Adapter CISCO MA-INJ-5 NA NA Supplied by client Note: 1. All power cords of the above support units are non-shielded (1.8m). ID Descriptions Qty. Length (m) Shielding (Yes/No) Cores (Qty.) Remarks 1. RJ-45 Cable 1 10 No 0 Provided by Lab 2. DC Cable 1 1.8 No 0 Supplied by client 3. RJ-45 Cable 1 0.5 No 0 Provided by Lab Note: The core(s) is(are) originally attached to the cable(s). Report No.: RF180704E03-3 Page No. 13 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

3.2.1 Configuration of System under Test POE mode: Report No.: RF180704E03-3 Page No. 14 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

Adapter mode: Report No.: RF180704E03-3 Page No. 15 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 Note: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Limits of unwanted emission out of the restricted bands Applicable To Limit 789033 D02 General UNII Test Procedure Field Strength at 3m New Rules v02r01 PK:74 (dBµV/m) AV:54 (dBµV/m) Equivalent Field Strength at Frequency Band Applicable To EIRP Limit 3m 5150~5250 MHz 15.407(b)(1) 5250~5350 MHz 15.407(b)(2) PK:-27 (dBm/MHz) PK:68.2(dBµV/m) 5470~5725 MHz 15.407(b)(3) *1 *1 PK:-27 (dBm/MHz) PK: 68.2(dBµV/m) *2 *2 PK:10 (dBm/MHz) PK:105.2 (dBµV/m) 15.407(b)(4)(i) *3 *3 5725~5850 MHz PK:15.6 (dBm/MHz) PK: 110.8(dBµV/m) *4 *4 PK:27 (dBm/MHz) PK:122.2 (dBµV/m) 15.407(b)(4)(ii) Emission limits in section 15.247(d) *2 *1 below the band edge increasing linearly to 10 beyond 75 MHz or more above of the band edge. dBm/MHz at 25 MHz above. *3 *4 below the band edge increasing linearly to a level from 5 MHz above or below the band edge of 15.6 dBm/MHz at 5 MHz above. increasing linearly to a level of 27 dBm/MHz at the band edge. Note: The following formula is used to convert the equipment isotropic radiated power (eirp) to field strength: 1000000 30 P E= µV/m, where P is the eirp (Watts). 3 Report No.: RF180704E03-3 Page No. 16 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

4.1.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver Agilent N9038A MY50010156 July 12, 2018 July 11, 2019 Pre-Amplifier EMCI EMC001340 980142 Feb. 09, 2018 Feb. 08, 2019 Loop Antenna(*) EM-6879 264 Dec. 16, 2016 Dec. 15, 2018 Electro-Metrics RF Cable NA LOOPCAB-001 Jan. 15, 2018 Jan. 14, 2019 RF Cable NA LOOPCAB-002 Jan. 15, 2018 Jan. 14, 2019 Pre-Amplifier Mini-Circuits ZFL-1000VH2B AMP-ZFL-05 May 05, 2018 May 04, 2019 Trilog Broadband Antenna VULB 9168 9168-361 Nov. 29, 2017 Nov. 28, 2018 SCHWARZBECK RF Cable 8D 966-3-1 Mar. 20, 2018 Mar. 19, 2019 RF Cable 8D 966-3-2 Mar. 20, 2018 Mar. 19, 2019 RF Cable 8D 966-3-3 Mar. 20, 2018 Mar. 19, 2019 Fixed attenuator UNAT-5+ PAD-3m-3-01 Oct. 03, 2017 Oct. 02, 2018 Mini-Circuits Horn_Antenna BBHA9120-D 9120D-406 Dec. 12, 2017 Dec. 11, 2018 SCHWARZBECK Pre-Amplifier EMC12630SE 980384 Jan. 29, 2018 Jan. 28, 2019 EMCI RF Cable EMC104-SM-SM-1200 160922 Jan. 29, 2018 Jan. 28, 2019 RF Cable EMC104-SM-SM-2000 150317 Jan. 29, 2018 Jan. 28, 2019 RF Cable EMC104-SM-SM-5000 150322 Jan. 29, 2018 Jan. 28, 2019 Spectrum Analyzer N9030A MY54490679 July 23, 2018 July 22, 2019 Keysight Pre-Amplifier EMC184045SE 980386 Jan. 29, 2018 Jan. 28, 2019 EMCI Horn_Antenna BBHA 9170 BBHA9170608 Dec. 14, 2017 Dec. 13, 2018 SCHWARZBECK RF Cable EMC102-KM-KM-1200 160924 Jan. 29, 2018 Jan. 28, 2019 Attenuator STI02-3310-10 013 Feb. 12, 2018 Feb. 11, 2019 STI Software ADT_Radiated_V8.7.08 NA NA NA Antenna Tower & Turn Table MF-7802 MF780208406 NA NA Max-Full Boresight Antenna Fixture FBA-01 FBA-SIP01 NA NA Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. *The calibration interval of the above test instruments is 24 months and the calibrations are traceable to NML/ROC and NIST/USA. 3. The test was performed in 966 Chamber No. 3. 4. The CANADA Site Registration No. is 20331-1 5. Loop antenna was used for all emissions below 30 MHz. 6. Tested Date: Aug. 29 to 30, 2018 Report No.: RF180704E03-3 Page No. 17 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF180704E03-3 Page No. 18 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF180704E03-3 Page No. 19 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Connected the EUT with the Laptop which is placed on remote site. b. Controlling software (QSPR (5.0-00161)) has been activated to set the EUT on specific status. Report No.: RF180704E03-3 Page No. 20 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

4.1.7 Test Results Above 1GHz Data DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 40GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 4804.00 44.3 PK 74.0 -29.7 1.84 H 296 42.7 1.6 2 4804.00 32.1 AV 54.0 -21.9 1.84 H 296 30.5 1.6 3 4874.00 41.2 PK 74.0 -32.8 1.77 H 276 39.6 1.6 4 4874.00 31.2 AV 54.0 -22.8 1.77 H 276 29.6 1.6 5 7311.00 44.6 PK 74.0 -29.4 1.34 H 343 36.9 7.7 6 7311.00 34.0 AV 54.0 -20.0 1.34 H 343 26.3 7.7 7 11490.00 41.2 PK 74.0 -32.8 1.63 H 249 28.9 12.3 8 11490.00 30.4 AV 54.0 -23.6 1.63 H 249 18.1 12.3 9 #17235.00 43.5 PK 68.2 -24.7 2.26 H 144 28.2 15.3 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 4804.00 39.1 PK 74.0 -34.9 1.65 V 10 37.5 1.6 2 4804.00 28.1 AV 54.0 -25.9 1.65 V 10 26.5 1.6 3 4874.00 39.3 PK 74.0 -34.7 1.19 V 265 37.7 1.6 4 4874.00 30.6 AV 54.0 -23.4 1.19 V 265 29.0 1.6 5 7311.00 42.4 PK 74.0 -31.6 1.63 V 360 34.7 7.7 6 7311.00 32.4 AV 54.0 -21.6 1.63 V 360 24.7 7.7 7 11490.00 40.6 PK 74.0 -33.4 1.33 V 193 28.3 12.3 8 11490.00 31.4 AV 54.0 -22.6 1.33 V 193 19.1 12.3 9 #17235.00 41.6 PK 68.2 -26.6 1.79 V 259 26.3 15.3 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF180704E03-3 Page No. 21 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

Below 1GHz Data: DETECTOR FREQUENCY RANGE 9kHz ~ 1GHz Quasi-Peak (QP) FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 111.58 31.3 QP 43.5 -12.2 1.50 H 74 41.7 -10.4 2 161.36 31.5 QP 43.5 -12.0 1.50 H 76 39.5 -8.0 3 226.93 33.5 QP 46.0 -12.5 1.50 H 267 44.1 -10.6 4 296.80 31.7 QP 46.0 -14.3 1.00 H 67 38.7 -7.0 5 324.81 30.8 QP 46.0 -15.2 1.00 H 232 36.8 -6.0 6 675.39 31.1 QP 46.0 -14.9 2.00 H 0 29.6 1.5 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF180704E03-3 Page No. 22 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

DETECTOR FREQUENCY RANGE 9kHz ~ 1GHz Quasi-Peak (QP) FUNCTION ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 85.41 33.1 QP 40.0 -6.9 2.00 V 360 46.7 -13.6 2 116.33 31.5 QP 43.5 -12.0 1.00 V 3 41.4 -9.9 3 150.69 30.8 QP 43.5 -12.7 1.00 V 83 38.3 -7.5 4 226.81 28.0 QP 46.0 -18.0 1.00 V 239 38.7 -10.7 5 300.00 28.2 QP 46.0 -17.8 2.00 V 360 35.2 -7.0 6 644.37 31.6 QP 46.0 -14.4 2.00 V 188 30.4 1.2 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF180704E03-3 Page No. 23 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Conducted Limit (dBuV) Frequency (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver ESCS 30 847124/029 Nov. 01, 2017 Oct. 31, 2018 R&S Line-Impedance Stabilization Network (for ESH3-Z5 848773/004 Nov. 15, 2017 Nov. 14, 2018 EUT) R&S Line-Impedance Stabilization Network ENV216 100072 June 04, 2018 June 03, 2019 (for Peripheral) R&S 50 ohms Terminator N/A EMC-04 Nov. 01, 2017 Oct. 31, 2018 RF Cable 5D-FB COCCAB-001 Sep. 29, 2017 Sep. 28, 2018 Fixed attenuator STI02-2200-10 003 Mar. 16, 2018 Mar. 15, 2019 EMCI Software BVADT_Cond_ NA NA NA BVADT V7.3.7.4 Note: 1. The calibration interval of the above test instruments are 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Conduction 1. 3. Tested Date: Aug. 29, 2018 Report No.: RF180704E03-3 Page No. 24 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. Note: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP) and average detection (AV) at frequency 0.15MHz-30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane Test Receiver EUT 40cm 80cm LISN Horizontal Ground Reference Plane Note: 1.Support units were connected to second LISN. For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as 4.1.6. Report No.: RF180704E03-3 Page No. 25 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

4.2.7 Test Results Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15391 10.04 39.19 35.54 49.23 45.58 65.79 55.79 -16.56 -10.21 2 0.37656 10.10 33.92 33.54 44.02 43.64 58.35 48.35 -14.33 -4.71 3 0.83750 10.14 31.76 28.81 41.90 38.95 56.00 46.00 -14.10 -7.05 4 1.21484 10.16 32.72 30.42 42.88 40.58 56.00 46.00 -13.12 -5.42 5 16.50391 10.91 29.76 23.68 40.67 34.59 60.00 50.00 -19.33 -15.41 6 25.46484 11.15 30.20 29.46 41.35 40.61 60.00 50.00 -18.65 -9.39 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF180704E03-3 Page No. 26 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.17734 9.95 28.87 18.33 38.82 28.28 64.61 54.61 -25.79 -26.33 2 0.27500 9.98 26.46 22.26 36.44 32.24 60.97 50.97 -24.53 -18.73 3 1.21484 10.04 28.39 26.24 38.43 36.28 56.00 46.00 -17.57 -9.72 4 1.49609 10.05 27.01 23.31 37.06 33.36 56.00 46.00 -18.94 -12.64 5 16.11719 10.71 28.58 22.54 39.29 33.25 60.00 50.00 -20.71 -16.75 6 25.45703 10.93 30.02 28.75 40.95 39.68 60.00 50.00 -19.05 -10.32 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF180704E03-3 Page No. 27 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF180704E03-3 Page No. 28 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF180704E03-3 Page No. 29 / 29 Report Format Version: 6.1.1 Reference No.: 180704E02


Document Created: 2019-03-23 18:40:10
Document Modified: 2019-03-23 18:40:10
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC