MX65W_USA_FCC_RF Exposure, Full Band_Safety Final Report

FCC ID: UDX-60047015

RF Exposure Info

Download: PDF
FCCID_2963250

‘. SPORTON International Inc. No, 52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwel—Shan Hsiang, Tao Yuan Hslen, Taiwan, R.0.C. Ph: 886—3—327—3456 / FAX: 886—3—327—0973 / www.sporton.com.tw Project No: CB10501015 Maximum Permissible Exposure Report Applicant‘s company Cisco Systems, Inc. Applicant Address 170 West Tasman Drive, San Jose, CA 95134 USA FCC ID UDX—60047015 Manufacturer‘s company Cisco Systems, Inc. Manufacturer Address 170 West Tasman Drive, San Jose, CA 95134 USA Product Name 802.1 1a/b/g/n/ac Wireless Router Brand Name CiSCO Model No. MXG5W—HW Ref. Standard(s) 47 CFR FCC Part 2 Subpart J, section 2.1091 Received Date Oct. 21, 2015 Final Test Date Dec. 23, 2015 Submission Type Original Equipment Tetng Laboratory 1190 Sam Chen SPORTON INTERNATIONAL INC. Report Format Version: 01 FCC ID : UDX60047015

Report No.: FA5O1504AB Table of Contents 1. GENERAL DESCRIPTION.................................................................................................................................... 1 1.1. EUT General Information .....................................................................................................................................................................1 1.2. Testing Location..................................................................................................................................................................................1 2. MAXIMUM PERMISSIBLE EXPOSURE.................................................................................................................... 2 2.1. Limit of Maximum Permissible Exposure ..............................................................................................................................................2 2.2. MPE Calculation Method ....................................................................................................................................................................2 2.3. Calculated Result and Limit................................................................................................................................................................3 Report Format Version: 01 Page No. : i of ii FCC ID : UDX-60047015 Issued Date : Jan. 08, 2016

Report No.: FA5O1504AB History of This Test Report REPORT NO. VERSION DESCRIPTION ISSUED DATE FA5O1504AB Rev. 01 Initial issue of report Jan. 08, 2016 Report Format Version: 01 Page No. : ii of ii FCC ID : UDX-60047015 Issued Date : Jan. 08, 2016

Report No.: FA5O1504AB 1. GENERAL DESCRIPTION 1.1. EUT General Information RF General Information Frequency Operating Evaluation Range Frequency Modulation Type Mode (MHz) (MHz) 802.11b: DSSS (DBPSK, DQPSK, CCK) 802.11g/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) 2.4GHz WLAN 2400-2483.5 2412-2462 802.11ac: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM) 5150-5250 5180-5240 802.11a/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) 5250-5350 5260-5320 802.11ac: OFDM (BPSK, QPSK, 16QAM, 64QAM, 5GHz WLAN 5470-5725 5500-5720 256QAM) 5725-5850 5745-5825 1.2. Testing Location Testing Location HWA YA ADD : No. 52, Hwa Ya 1st Rd., Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. TEL : 886-3-327-3456 FAX : 886-3-327-0973 JHUBEI ADD : No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. TEL : 886-3-656-9065 FAX : 886-3-656-9085 Report Format Version: 01 Page No. : 1 of 3 FCC ID : UDX-60047015 Issued Date : Jan. 08, 2016

Report No.: FA5O1504AB 2. MAXIMUM PERMISSIBLE EXPOSURE 2.1. Limit of Maximum Permissible Exposure (A) Limits for Occupational / Controlled Exposure Averaging Time Frequency Range Electric Field Magnetic Field Power Density (S) |E|²,|H|² or S (MHz) Strength (E) (V/m) Strength (H) (A/m) (mW/ cm²) (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Averaging Time Frequency Range Electric Field Magnetic Field Power Density (S) |E|²,|H|² or S (MHz) Strength (E) (V/m) Strength (H) (A/m) (mW/ cm²) (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 2.2. MPE Calculation Method The MPE was calculated at 20 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: E (V/m) ＝ 30  P  G Power Density: Pd (W/m²) ＝ E2 d 377 E ＝ Electric field (V/m) P ＝ Peak RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 30  P  G 377  d 2 Report Format Version: 01 Page No. : 2 of 3 FCC ID : UDX-60047015 Issued Date : Jan. 08, 2016

Report No.: FA5O1504AB 2.3. Calculated Result and Limit Exposure Environment: General Population / Uncontrolled Exposure For 5GHz Band (Band 1+Band 4): Antenna Type : Dipole Ant. Conducted Power for IEEE 802.11a: 21.93 dBm Average Output Limit of Antenna Power Distance Test Freq. Composite Power Power Gain Density (S) Test Result (cm) (MHz) Gain (dBi) Density (S) (numeric) (dBm) (mW) (mW/cm²) (mW/cm²) 20 5240 3.30 2.1380 21.9259 155.8098 0.066305 1 Complies For 5GHz Band (Band 2+Band 3): Antenna Type : Dipole Ant. Conducted Power for IEEE 802.11a: 21.88 dBm Average Output Limit of Antenna Power Distance Test Freq. Composite Power Power Gain Density (S) Test Result (cm) (MHz) Gain (dBi) Density (S) (numeric) (dBm) (mW) (mW/cm²) (mW/cm²) 20 5320 3.30 2.1380 21.8812 154.2138 0.065626 1 Complies For 2.4GHz Band: Antenna Type : Dipole Ant. Conducted Power for IEEE 802.11b: 29.79 dBm Average Output Limit of Antenna Power Distance Test Freq. Composite Power Power Gain Density (S) Test Result (cm) (MHz) Gain (dBi) Density (S) (numeric) (dBm) (mW) (mW/cm²) (mW/cm²) 20 2437 2.00 1.5849 29.7917 953.1676 0.300690 1 Complies Conclusion: Both of the WLAN 2.4GHz Band and WLAN 5GHz Band can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.300690 / 1 + 0.066305 / 1 = 0.366995, which is less than “1”. This confirmed that the device complies. Report Format Version: 01 Page No. : 3 of 3 FCC ID : UDX-60047015 Issued Date : Jan. 08, 2016


Document Created: 2016-01-08 17:27:24
Document Modified: 2016-01-08 17:27:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC