MR18_UDX-60026010_FCC Part 2 Report_New Rules_MPE

FCC ID: UDX-60026010

RF Exposure Info

Download: PDF
FCCID_2981596

                                                           RF Exposure Report

                       Report No.: SA130911C29E

                            FCC ID: UDX-60026010

                       Test Model: MR18-HW

                 Received Date: Oct. 05, 2015

                         Test Date: Oct. 13 ~ Nov. 10, 2015

                     Issued Date: Nov. 20, 2015


                         Applicant: Cisco Systems, Inc.

                          Address: 170 West Tasman Drive, San Jose, CA 95134


                        Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

                    Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan,
                                 R.O.C.
                    Lab Address: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City
                                 33383, TAIWAN (R.O.C.)




This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted
only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this
report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product
unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you
provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided,
however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time
shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific
mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report
must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies.



Report No.: SA130911C29E                                             Page No. 1 / 6                                             Report Format Version: 6.1.1
Reference No.: 151005C09


                                                                   Table of Contents
Release Control Record .................................................................................................................................. 3
1         Certificate of Conformity...................................................................................................................... 4
2         RF Exposure .......................................................................................................................................... 5
    2.1      Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5
    2.2      MPE Calculation Formula ................................................................................................................... 5
    2.3      Classification ....................................................................................................................................... 5
3         Calculation Result Of Maximum Conducted Power .......................................................................... 6




Report No.: SA130911C29E                                             Page No. 2 / 6                                              Report Format Version: 6.1.1
Reference No.: 151005C09


                                         Release Control Record


Issue No.             Description                                        Date Issued
SA130911C29E          Original release                                   Nov. 20, 2015




Report No.: SA130911C29E                    Page No. 3 / 6        Report Format Version: 6.1.1
Reference No.: 151005C09


1    Certificate of Conformity


            Product: Wireless 802.11 abgn AP

              Brand: Cisco

        Test Model: MR18-HW

    Sample Status: Engineering sample

          Applicant: Cisco Systems, Inc.

          Test Date: Oct. 13 ~ Nov. 10, 2015

         Standards: FCC Part 2 (Section 2.1091)

                           KDB 447498 D03
                           IEEE C95.1



The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd.,
Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data
evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts
of the measurements of the sample’s EMC characteristics under the conditions specified in this report.




      Prepared by :                                               , Date:       Nov. 20, 2015
                                  Suntee Liu / Specialist




     Approved by :                                                , Date:       Nov. 20, 2015
                                Ken Liu / Senior Manager




Report No.: SA130911C29E                         Page No. 4 / 6                      Report Format Version: 6.1.1
Reference No.: 151005C09


2     RF Exposure
2.1 Limits for Maximum Permissible Exposure (MPE)
    Frequency Range          Electric Field     Magnetic Field       Power Density         Average Time
         (MHz)              Strength (V/m)      Strength (A/m)         (mW/cm2)              (minutes)
                             Limits For General Population / Uncontrolled Exposure

       300-1500                   …                    …                  F/1500                  30

     1500-100,000                 …                    …                   1.0                    30
F = Frequency in MHz

2.2 MPE Calculation Formula
Pd = (Pout*G) / (4*pi*r2)
where
Pd = power density in mW/cm2
Pout = output power to antenna in mW
G = gain of antenna in linear scale
Pi = 3.1416
R = distance between observation point and center of the radiator in cm

2.3 Classification

The antenna of this product, under normal use condition, is at least 23cm away from the body of the user. So,
this device is classified as Mobile Device.




Report No.: SA130911C29E                       Page No. 5 / 6                        Report Format Version: 6.1.1
Reference No.: 151005C09


3       Calculation Result Of Maximum Conducted Power
            Frequency Band      Max Power       Antenna Gain       Distance     Power Density           Limit
 Radio
                (MHz)             (dBm)             (dBi)            (cm)         (mW/cm2)            (mW/cm2)
    1         2412-2462            29.25              7.01            23            0.636                  1

              5180-5240            23.84              7.01            23            0.183                  1
    2
              5745-5825            22.73              9.01            23            0.225                  1

              2412-2462            25.28                2             23            0.080                  1

    3         5180-5240            19.27                2             23            0.020                  1

              5745-5825            16.47                2             23             0.011                 1
Note:
Radio 1 2412-2462MHz Directional gain = 4dBi + 10log(2) = 7.01dBi
Radio 2 5180-5240MHz Directional gain = 4dBi + 10log(2) = 7.01dBi
Radio 2 5745-5825MHz Directional gain = 6dBi + 10log(2) = 9.01dBi

Conclusion:
The formula of calculated the MPE is:
CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1
CPD = Calculation power density
LPD = Limit of power density

Radio 1 + Radio 2 + Radio 3 = 0.636 + 0.225 + 0.080 = 0.941
Therefore all the maximum calculations of above situations are less than the “1” limit.



---END---




Report No.: SA130911C29E                       Page No. 6 / 6                             Report Format Version: 6.1.1
Reference No.: 151005C09



Document Created: 2017-12-04 09:04:45
Document Modified: 2017-12-04 09:04:45

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC