UDX-60024010_Request for C2PC_rev2

FCC ID: UDX-60024010

Cover Letter(s)

Download: PDF
FCCID_3024471

Cisco Systems, Inc. 170 West Tasman Drive, San Jose, CA 95134 USA Date: 27 May 2016 Request for C2PC Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: UDX-60024010 Model: Z1-HW-US Grant Date: October 25th, 2012 Applicant: Cisco Systems, Inc. Dear Examiner, This is to request a Class II permissive change for Z1-HW-US, FCC ID: UDX-60024010, originally granted on October 25th, 2012. The major change filed under this application is: Change #1 Product updated to meet new FCC 15.407 rules for operation in UNII-1 and UNII-3. Product updated to 15.407(b)(4)(ii). Note: UNII B1 output powers were measured as average. All RF parameters for UNII B3 have remained unchanged from the original granted device and comply with the new UNII rules with the exception of OOBE emissions which continue to comply with 15.247 OOBE requirements specified in Part 15E Section 15.407(b)(4)(ii). With regards to PSD, the maximum PSD in 3kHz was -1.279 dBm/3kHz under the original filing dated October 25th, 2012. Scaling the original PSD by 10 log (500kHz/3kHz) results in maximum PSD in 500kHz of 20.940 dBm/500kHz, which is below the 30dBm/500kHz limit for UNII B3. If you have any questions regarding this application, please feel free to contact me. Sincerely, Alexander C. Gioe Hardware Engineering Manager, CNG Cisco Systems, Inc. Tel: +1 415-432-1000 Fax: +1 415 632-5899 compliance@meraki.com


Document Created: 0530-11-02 00:00:00
Document Modified: 0530-11-02 00:00:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC