Test Report

FCC ID: UCE312057A

Test Report

Download: PDF

FCCID_2671097

TEST REPORT SERIAL NO: UL-RPT-RP90385JD12A V2.0

VERSION 2.0 ISSUE DATE: 18 JUNE 2015

Table of Contents
1. Customer Information................................................................................................................ 4
2. Summary of Testing................................................................................................................... 5
2.1. General Information 5
2.2. Summary of Test Results 5
2.3. Methods and Procedures 6
2.4. Deviations from the Test Specification 6
3. Equipment Under Test (EUT) .................................................................................................... 7
3.1. Identification of Equipment Under Test (EUT) 7
3.2. Description of EUT 7
3.3. Modifications Incorporated in the EUT 7
3.4. Additional Information Related to Testing 8
3.5. Support Equipment 8
4. Operation and Monitoring of the EUT during Testing ............................................................. 9
4.1. Operating Modes 9
4.2. Configuration and Peripherals 9
5. Measurements, Examinations and Derived Results ...............................................................10
5.1. General Comments 10
5.2. Test Results 11
5.2.1. Receiver/Idle Mode AC Conducted Spurious Emissions 11
5.2.2. Receiver/Idle Mode Radiated Spurious Emissions 14
5.2.3. Transmitter AC Conducted Spurious Emissions 17
5.2.4. Transmitter Fundamental Field Strength 20
5.2.5. Transmitter Radiated Spurious Emissions 22
5.2.6. Transmitter Band Edge Radiated Emissions 24
5.2.7. Transmitter 20 dB Bandwidth 26
5.2.8. Transmitter Frequency Stability (Temperature & Voltage Variation) 27
6. Measurement Uncertainty ........................................................................................................29
7. Report Revision History ...........................................................................................................30

UL VS LTD Page 3 of 30

TEST REPORT SERIAL NO: UL-RPT-RP90385JD12A V2.0

VERSION 2.0 ISSUE DATE: 18 JUNE 2015

1. Customer Information
Company Name: Panasonic Mobile Communications Development of Europe Ltd
Address: Panasonic House
Willoughby Road
Bracknell
Berkshire
RG12 8FP
United Kingdom

Page 4 of 30 UL VS LTD

TEST REPORT SERIAL NO: UL-RPT-RP90385JD12A V2.0

VERSION 2.0 ISSUE DATE: 18 JUNE 2015

2.3. Methods and Procedures

Reference: ANSI C63.4 (2009)
Title: American National Standard for Methods of Measurement of Radio-Noise
Emissions from Low-Voltage Electrical and Electronic Equipment in the Range
of 9 kHz to 40 GHz
Reference: ANSI C63.10 (2009)
Title: American National Standard for Testing Unlicensed Wireless Devices

2.4. Deviations from the Test Specification

For the measurements contained within this test report, there were no deviations from, additions to, or
exclusions from the test specification identified above.

Page 6 of 30 UL VS LTD

TEST REPORT SERIAL NO: UL-RPT-RP90385JD12A V2.0

VERSION 2.0 ISSUE DATE: 18 JUNE 2015

4. Operation and Monitoring of the EUT during Testing
4.1. Operating Modes

The EUT was tested in the following operating mode(s):
• Receiver/Idle mode.
• Constantly transmitting at full power with a modulated carrier in RFID test mode.

4.2. Configuration and Peripherals

The EUT was tested in the following configuration(s):
• The RFID transmitter test mode was enabled by means of bespoke software provided by the
Customer.
• Receiver idle/standby mode radiated spurious emission tests were performed with the AC Charger
and PHF connected to the EUT as this was found to be the worst case during pre-scans. All
accessories were individually connected and measurements made during pre-scans to determine
the worst case combination.
• Transmitter radiated spurious emission tests were performed with the AC Charger and PHF
connected to the EUT as this was found to be the worst case during pre-scans. All appropriate
accessories were individually connected and measurements made during pre-scans to determine
the worst case combination.
• Testing at voltage extremes was performed using a dummy battery supplied by the Customer.
• AC conducted emissions tests were performed with the EUT connected to the AC charger. The AC
charger was connected to a 120 VAC 60 Hz single phase supply via a LISN.

UL VS LTD Page 9 of 30

TEST REPORT SERIAL NO: UL-RPT-RP90385JD12A V2.0

VERSION 2.0 ISSUE DATE: 18 JUNE 2015

5. Measurements, Examinations and Derived Results
5.1. General Comments
Measurement uncertainties are evaluated in accordance with current best practice. Our reported expanded
uncertainties are based on standard uncertainties, which are multiplied by an appropriate coverage factor to
provide a statistical confidence level of approximately 95%. Please refer to Section 6: Measurement
Uncertainties for details.
In accordance with UKAS requirements all the measurement equipment is on a calibration schedule. All
equipment was within the calibration period on the date of testing.

Page 10 of 30 UL VS LTD

TEST REPORT SERIAL NO: UL-RPT-RP90385JD12A V2.0

VERSION 2.0 ISSUE DATE: 18 JUNE 2015

5.2. Test Results
5.2.1. Receiver/Idle Mode AC Conducted Spurious Emissions
Test Summary:
Test Engineer: David Doyle Test Date: 15 November 2012
Test Sample IMEI: 353740050011927

FCC Reference: Part 15.107(a)
Test Method Used: As detailed in ANSI C63.10 Section 6.2 referencing ANSI C63.4

Environmental Conditions:

Temperature (°C): 21
Relative Humidity (%): 41

Results: Live / Quasi Peak
Frequency Line Level Limit Margin Result
(MHz) µV)
(dBµ µV)
(dBµ (dB)
0.479 Live 42.3 56.4 14.1 Complied
2.558 Live 34.6 56.0 21.4 Complied
4.259 Live 36.0 56.0 20.0 Complied
4.493 Live 37.9 56.0 18.1 Complied
5.325 Live 36.5 60.0 23.5 Complied
5.694 Live 36.2 60.0 23.8 Complied

Results: Live / Average

Frequency Line Level Limit Margin Result
(MHz) µV)
(dBµ µV)
(dBµ (dB)
0.474 Live 35.9 46.4 10.5 Complied
2.832 Live 33.4 46.0 12.6 Complied
4.335 Live 28.8 46.0 17.2 Complied
4.515 Live 30.6 46.0 15.4 Complied
5.357 Live 29.4 50.0 20.6 Complied
5.681 Live 29.9 50.0 20.1 Complied

UL VS LTD Page 11 of 30

TEST REPORT SERIAL NO: UL-RPT-RP90385JD12A V2.0

VERSION 2.0 ISSUE DATE: 18 JUNE 2015

Receiver/Idle Mode AC Conducted Spurious Emissions (continued)
Results: Neutral / Quasi Peak

Frequency Line Level Limit Margin Result
(MHz) µV)
(dBµ µV)
(dBµ (dB)
0.209 Neutral 34.6 63.3 28.7 Complied
2.004 Neutral 22.1 56.0 33.9 Complied
2.526 Neutral 23.7 56.0 32.3 Complied
3.539 Neutral 28.8 56.0 27.2 Complied
4.812 Neutral 36.7 56.0 19.3 Complied
5.240 Neutral 36.4 60.0 23.6 Complied
5.645 Neutral 36.2 60.0 23.8 Complied

Results: Neutral / Average

Frequency Line Level Limit Margin Result
(MHz) µV)
(dBµ µV)
(dBµ (dB)
0.213 Neutral 23.4 53.1 29.7 Complied
1.950 Neutral 13.6 46.0 32.4 Complied
2.949 Neutral 15.6 46.0 30.4 Complied
4.205 Neutral 22.6 46.0 23.4 Complied
4.920 Neutral 26.9 46.0 19.1 Complied
5.177 Neutral 27.7 50.0 22.3 Complied
5.573 Neutral 28.3 50.0 21.7 Complied

Page 12 of 30 UL VS LTD

TEST REPORT SERIAL NO: UL-RPT-RP90385JD12A V2.0

VERSION 2.0 ISSUE DATE: 18 JUNE 2015

5.2.2. Receiver/Idle Mode Radiated Spurious Emissions
Test Summary:

Test Engineer: Nick Steele Test Dates: 11 November 2012 &
17 November 2012
Test Sample IMEI: 353740050011927

FCC Reference: Part 15.109
Test Method Used: As detailed in ANSI C63.10 Sections 6.3, 6.4 and 6.5
referencing ANSI C63.4
Frequency Range: 9 kHz to 1000 MHz

Environmental Conditions:

Temperature (°C): 23 to 26
Relative Humidity (%): 33 to 34

Note(s):

1. Limits below 30 MHz are specified at a test distance of 30 metres, whilst below 0.49 MHz they are
specified at a test distance of 300 metres. However, as specified by FCC Section 15.31 (f)(2),
measurements may be performed at a closer distance and the measured level corrected to the specified
measurement distance by using the square of an inverse linear distance extrapolation factor
(40dB/decade).
2. A transducer factor on the measuring instrument was used to extrapolate the results at 3 metres to a
distance of 30 metres where required. A distance extrapolation factor of 40 dB was used.
3. Final measurement values include corrections for antenna factor and cable losses.
4. All emissions on the 9 kHz to 150 kHz plot were investigated and found to be radiating from the test site
turntable.
5. All other emissions shown on the pre-scan plots were investigated and found to be >20 dB below the
applicable limit or below the measurement system noise floor.
6. Measurements in the range 30 MHz to 1 GHz were performed in a semi-anechoic chamber (RFI Asset
Number K0001) at a distance of 3 metres. The EUT was placed at a height of 80 cm above the reference
ground plane in the centre of the chamber turntable. Maximum emission levels were determined by
height searching the measurement antenna over the range 1 metre to 4 metres

Results: Quasi Peak

Frequency Antenna Level Limit Margin Result
(MHz) Polarity µV/m)
(dBµ µV/m)
(dBµ (dB)
30.986 Vertical 20.2 40.0 19.8 Complied
36.115 Vertical 14.8 40.0 25.2 Complied
50.848 Vertical 10.9 40.0 29.1 Complied
127.430 Vertical 11.1 43.5 32.4 Complied
142.693 Vertical 9.9 43.5 33.6 Complied
956.932 Vertical 24.6 46.0 21.4 Complied

Page 14 of 30 UL VS LTD

TEST REPORT SERIAL NO: UL-RPT-RP90385JD12A V2.0

VERSION 2.0 ISSUE DATE: 18 JUNE 2015

Receiver/Idle Mode Radiated Spurious Emissions (continued)
Marker 1 [T1] RBW 300 Hz RF Att 10 dB Marker 1 [T1] RBW 10 kHz RF Att 10 dB
Ref Lvl 5.16 dB V/m VBW 1 kHz Ref Lvl -10.18 dB V/m VBW 30 kHz
70 dB* 15.72727148 kHz SWT 8 s Unit dB V/m 70 dB* 187.46845177 kHz SWT 760 ms Unit dB V/m
70 70
10 kHz 1 [T1] 1005.16
kHz dB V/m 1 MHz 1 [T1]10 MHz
-10.18 dB V/m
A007FCC A A
15.72727148 kHz 187.46845177 kHz
60 60 A007FCC
2 [T1] -20.33 dB V/m
892.86691082 kHz
50 50

40 IN1 40 IN1
1MAX 1MA 1MAX 1MA

30 30

20 20

TDF TDF
10 10
1

0 0

1
-10 -10

2
-20 -20

-30 -30
Start 9 kHz Stop 150 kHz Start 150 kHz Stop 30 MHz

Title: 90385 Title: 90385
Comment A: RECEIVER RADIATED EMISSIONS Comment A: RECEIVER RADIATED EMISSIONS
Date: 17.NOV.2012 10:24:14 Date: 17.NOV.2012 10:32:50

FCC Part 15.109 Radiated Emissions Class B 30MHz-1GHz 3m

80

75

70

65

60

55 FCC Part 15 Class B Field Strength QP 3M

50

45
Level in dBµV/m

40

35

30

25

20

15

10

5

0
30M 50M 60M 80M 100M 200M 300M 400M 500M 800M 1G

Frequency in Hz

Note: These plots are pre-scans and for indication purposes only. For final measurements, see accompanying
table.

UL VS LTD Page 15 of 30

TEST REPORT SERIAL NO: UL-RPT-RP90385JD12A V2.0

VERSION 2.0 ISSUE DATE: 18 JUNE 2015

5.2.3. Transmitter AC Conducted Spurious Emissions
Test Summary:

Test Engineer: Nick Steele Test Date: 21 November 2012
Test Sample IMEI: 353740050011927

FCC Reference: Part 15.207
Test Method Used: As detailed in ANSI C63.10 Section 6.2 referencing ANSI C63.4

Environmental Conditions:

Temperature (°C): 19
Relative Humidity (%): 46

Results: Live / Quasi Peak

Frequency Line Level Limit Margin Result
(MHz) µV)
(dBµ µV)
(dBµ (dB)
0.150 Live 58.2 66.0 7.8 Complied
0.213 Live 54.6 63.1 8.5 Complied
0.227 Live 53.9 62.6 8.7 Complied
0.245 Live 53.3 61.9 8.6 Complied
0.254 Live 52.7 61.6 8.9 Complied
0.267 Live 52.2 61.2 9.0 Complied
0.290 Live 50.9 60.5 9.6 Complied
0.303 Live 50.6 60.2 9.6 Complied
0.330 Live 49.4 59.5 10.1 Complied
0.425 Live 46.8 57.4 10.6 Complied
13.560 Live 48.5 60.0 11.5 Complied

Results: Live / Average
Frequency Line Level Limit Margin Result
(MHz) µV)
(dBµ µV)
(dBµ (dB)
0.204 Live 30.6 53.4 22.8 Complied
0.254 Live 28.9 51.6 22.7 Complied
0.308 Live 28.6 50.0 21.4 Complied
0.465 Live 28.4 46.6 18.2 Complied
4.578 Live 28.2 46.0 17.8 Complied
13.560 Live 47.1 50.0 2.9 Complied

UL VS LTD Page 17 of 30

TEST REPORT SERIAL NO: UL-RPT-RP90385JD12A V2.0

VERSION 2.0 ISSUE DATE: 18 JUNE 2015

Transmitter AC Conducted Spurious Emissions (continued)
Results: Neutral / Quasi Peak

Frequency Line Level Limit Margin Result
(MHz) µV)
(dBµ µV)
(dBµ (dB)
0.159 Neutral 55.5 65.5 10.0 Complied
0.245 Neutral 51.5 61.9 10.4 Complied
0.416 Neutral 45.1 57.5 12.4 Complied
0.731 Neutral 38.5 56.0 17.5 Complied
1.275 Neutral 33.6 56.0 22.4 Complied
4.673 Neutral 33.4 56.0 22.6 Complied
4.920 Neutral 34.7 56.0 21.3 Complied
13.560 Neutral 48.9 60.0 11.1 Complied

Results: Neutral / Average

Frequency Line Level Limit Margin Result
(MHz) µV)
(dBµ µV)
(dBµ (dB)
0.204 Neutral 31.6 53.4 21.8 Complied
0.209 Neutral 31.1 53.3 22.2 Complied
0.470 Neutral 23.2 46.5 23.3 Complied
4.821 Neutral 24.4 46.0 21.6 Complied
5.361 Neutral 24.9 50.0 25.1 Complied
13.560 Neutral 46.5 50.0 3.5 Complied

Page 18 of 30 UL VS LTD

TEST REPORT SERIAL NO: UL-RPT-RP90385JD12A V2.0

VERSION 2.0 ISSUE DATE: 18 JUNE 2015

5.2.4. Transmitter Fundamental Field Strength
Test Summary:

Test Engineer: Nick Steele Test Date: 17 November 2012
Test Sample IMEI: 353740050011927

FCC Reference: Part 15.225(a)(b)(c)(d)
Test Method Used: ANSI C63.10 Section 6.4

Environmental Conditions:

Temperature (°C): 26
Relative Humidity (%): 34

Note(s):

1. The limit is specified at a test distance of 30 metres. However, as specified by FCC Section 15.31 (f)(2),
measurements may be performed at a closer distance and the measured level corrected to the specified
measurement distance by using the square of an inverse linear distance extrapolation factor
(40dB/decade).
2. A transducer factor on the measuring instrument was used to extrapolate the results at 3 metres to a
distance of 30 metres. A distance extrapolation factor of 40 dB was used.
3. Pre-scans were performed with a peak detector. Final measurements were performed with a quasi-peak
detector.
Note: An additional 20 dB has been added to attain the final value shown in the table; this is to account
for a transducer factor that was not included during the original measurement.
i.e.: -2.9 dBuV/m + 20 dB = 17.1 dBuV/m

Results: Quasi Peak
Frequency Antenna Level Limit at 30 m Margin Result
(MHz) Polarity µV/m)
(dBµ µV/m)
(dBµ (dB)
13.56 90° to EUT 17.1 84.0 66.9 Complied

Marker 1 [T1] RBW 10 kHz RF Att 10 dB
Ref Lvl -2.90 dB V/m VBW 30 kHz
60 dB* 13.56300601 MHz SWT 25 ms Unit dB V/m
60
1 [T1] -2.90 dB V/m A
13.56300601 MHz
50

40

30 15225BE IN1
1MAX 1MA

20

10

TDF
0 1

-10

-20

-30
F2
F1
-40
Start 13.06 MHz 100 kHz/ Stop 14.06 MHz

Title: 90385
Date: 17.NOV.2012 09:16:31

Page 20 of 30 UL VS LTD

TEST REPORT SERIAL NO: UL-RPT-RP90385JD12A V2.0

VERSION 2.0 ISSUE DATE: 18 JUNE 2015

5.2.5. Transmitter Radiated Spurious Emissions
Test Summary:

Test Engineer: Nick Steele Test Date: 17 November 2012
Test Sample IMEI: 353740050011927

FCC Reference: Parts 15.225(d) & 15.209(a)
Test Method Used: As detailed in ANSI C63.10 Sections 6.3, 6.4 and 6.5 referencing
ANSI C63.4
Frequency Range: 9 kHz to 1000 MHz

Environmental Conditions:

Temperature (°C): 26
Relative Humidity (%): 34

Note(s):
1. Limits below 30 MHz are specified at a test distance of 30 metres, whilst below 0.49 MHz they are
specified at a test distance of 300 metres. However, as specified by FCC Section 15.31 (f)(2),
measurements may be performed at a closer distance and the measured level corrected to the specified
measurement distance by using the square of an inverse linear distance extrapolation factor
(40dB/decade).
2. A transducer factor on the measuring instrument was used to extrapolate the results at 3 metres to a
distance of 30 metres where required. A distance extrapolation factor of 40 dB was used.
3. Final measurement values include corrections for antenna factor and cable losses.
4. The emission shown at approximately 13.56 MHz is the fundamental.
5. All emissions on the 9 kHz to 150 kHz plot were investigated and found to be radiating from the test site
turntable.
6. All other emissions shown on the pre-scan plots were investigated and found to be >20 dB below the
applicable limit or below the measurement system noise floor.
7. Measurements in the range 30 MHz to 1 GHz were performed in a semi-anechoic chamber (RFI Asset
Number K0001) at a distance of 3 metres. The EUT was placed at a height of 80 cm above the reference
ground plane in the centre of the chamber turntable. Maximum emission levels were determined by
height searching the measurement antenna over the range 1 metre to 4 metres.

Results: Quasi Peak

Frequency Antenna Level Limit Margin Result
(MHz) Polarity µV/m)
(dBµ µV/m)
(dBµ (dB)
244.092 Vertical 14.5 46.0 31.5 Complied
257.622 Vertical 17.7 46.0 28.3 Complied
271.210 Vertical 14.2 46.0 31.8 Complied
284.741 Vertical 16.4 46.0 29.6 Complied

Page 22 of 30 UL VS LTD

TEST REPORT SERIAL NO: UL-RPT-RP90385JD12A V2.0

VERSION 2.0 ISSUE DATE: 18 JUNE 2015

5.2.6. Transmitter Band Edge Radiated Emissions
Test Summary:

Test Engineer: Nick Steele Test Date: 17 November 2012
Test Sample IMEI: 353740050011927

FCC Reference: Parts 15.225(c)(d) & 15.209(a)
Test Method Used: As detailed in ANSI C63.10 Section 6.9.2

Environmental Conditions:

Temperature (°C): 26
Relative Humidity (%): 34

Note(s):
1. A transducer factor on the measuring instrument was used to extrapolate the results at 3 metres to a
distance of 30 metres where required. A distance extrapolation factor of 40 dB was used.
2. The band edge emission plot shown below is low by a factor of 20 dB, due to the absence of a
transducer factor at the time of measurement. An additional 20 dB was subsequently added to any band
edge measurements, for comparisons with the limit, when determining compliance.

Results: Quasi Peak / Lower Band Edge

Frequency Level Limit Margin Result
(MHz) µV/m)
(dBµ µV/m)
(dBµ (dB)
13.11 -3.8 29.5 33.3 Complied

Results: Quasi Peak / Upper Band Edge

Frequency Level Limit Margin Result
(MHz) µV/m)
(dBµ µV/m)
(dBµ (dB)
14.01 -5.2 29.5 34.7 Complied

Marker 1 [T1] RBW 10 kHz RF Att 10 dB
Ref Lvl -23.83 dB V/m VBW 30 kHz
60 dB* 13.11000000 MHz SWT 25 ms Unit dB V/m
60
1 [T1] -23.83 dB V/m
A
13.11000000 MHz
50 2 [T1] -25.24 dB V/m
14.01000000 MHz

40

30 15225BE IN1
1MAX 1MA

20

10

TDF
0

-10

-20 1
2

-30
F2
F1
-40
Start 13.06 MHz 100 kHz/ Stop 14.06 MHz

Title: 90385
Comment A: TRANSMITTER RADIATED EMISSIONS
BAND EDGE
Date: 17.NOV.2012 09:15:25

Page 24 of 30 UL VS LTD

TEST REPORT SERIAL NO: UL-RPT-RP90385JD12A V2.0

VERSION 2.0 ISSUE DATE: 18 JUNE 2015

5.2.8. Transmitter Frequency Stability (Temperature & Voltage Variation)
Test Summary:

Test Engineer: Andrew Edwards Test Date: 28 November 2012
Test Sample IMEI: 353740050011927

FCC Reference: Part 15.225(e)
Test Method Used: As detailed in ANSI C63.10 Section 6.8.1 and 6.8.2

Environmental Conditions:

Temperature (°C): 23
Relative Humidity (%): 32

Results: Maximum frequency error of the EUT with variations in ambient temperature

Time after Start-up
Temperature (°°C)
0 minutes 2 minutes 5 minutes 10 minutes
-20 13.560249 MHz 13.560251 MHz 13.560251 MHz 13.560250 MHz
20 13.560126 MHz 13.560121 MHz 13.560119 MHz 13.560118 MHz
50 13.559980 MHz 13.559974 MHz 13.559971 MHz 13.559970 MHz

Frequency with Worst Frequency Error Frequency Limit (%) Margin (%) Result
Case Deviation (Hz) Error (%)
(MHz)
13.560251 251 0.001851 0.01 0.008149 Complied

Results: Maximum frequency error of the EUT with variations in nominal operating voltage
at an ambient temperature of 20°°C

Supply Nominal Measured
Frequency Frequency
Voltage Frequency Frequency Limit (%) Margin (%) Result
Error (Hz) Error (%)
(VDC) (MHz) (MHz)
3.4 13.56 13.560111 111 0.000819 0.01 0.009181 Complied
3.7 13.56 13.560126 126 0.000929 0.01 0.009071 Complied
4.2 13.56 13.560117 117 0.000863 0.01 0.009137 Complied

UL VS LTD Page 27 of 30

TEST REPORT SERIAL NO: UL-RPT-RP90385JD12A V2.0

VERSION 2.0 ISSUE DATE: 18 JUNE 2015

6. Measurement Uncertainty
No measurement or test can ever be perfect and the imperfections give rise to error of measurement in the
results. Consequently the result of a measurement is only an approximation to the value of the measurand
(the specific quantity subject to measurement) and is only complete when accompanied by a statement of
the uncertainty of the approximation.
The expression of uncertainty of a measurement result allows realistic comparison of results with reference
values and limits given in specifications and standards.
The uncertainty of the result may need to be taken into account when interpreting the measurement results.
The reported expanded uncertainties below are based on a standard uncertainty multiplied by an appropriate
coverage factor such that a confidence level of approximately 95% is maintained. For the purposes of this
document “approximately” is interpreted as meaning “effectively” or “for most practical purposes”.

Confidence Calculated
Measurement Type Range
Level (%) Uncertainty
AC Conducted Spurious Emissions 0.15 MHz to 30 MHz 95% ±3.25 dB
20 dB Bandwidth 13 MHz to 14 MHz 95% ±0.92 ppm
Frequency Stability 13 MHz to 14 MHz 95% ±0.92 ppm
Radiated Spurious Emissions 9 kHz to 30 MHz 95% ±3.53 dB
Radiated Spurious Emissions 30 MHz to 1000 MHz 95% ±2.94 dB
Transmitter Fundamental Field Strength 13 MHz to 14 MHz 95% ±3.53 dB

The methods used to calculate the above uncertainties are in line with those recommended within the
various measurement specifications. Where measurement specifications do not include guidelines for the
evaluation of measurement uncertainty the published guidance of the appropriate accreditation body is
followed.

UL VS LTD Page 29 of 30

TEST REPORT SERIAL NO: UL-RPT-RP90385JD12A V2.0

VERSION 2.0 ISSUE DATE: 18 JUNE 2015

7. Report Revision History
Version Revision Details
Number Page No(s) Clause Details
1.0 - - Initial Version
2.0 20 & 24 - Corrected previously reported emissions levels by +20 dB

--- END OF REPORT ---

Page 30 of 30 UL VS LTD

Document Created: 2015-06-18 15:13:06
Document Modified: 2015-06-18 15:13:06

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC