RF Test Report -BLE

FCC ID: UAY-W8997-M1216

Test Report

Download: PDF
FCCID_4449480

FCC Test Report (BT-LE) Report No.: RF161216E08H-4 FCC ID: UAY-W8997-M1216 Test Model: W8997-M1216 Received Date: Aug. 15, 2019 Test Date: Sep. 06 to 07, 2019 Issued Date: Sep. 16, 2019 Applicant: Marvell Semiconductor, Inc. Address: 5488 Marvell Lane, Santa Clara CA95054 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location : E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / 723255 / TW2022 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF161216E08H-4 Page No. 1 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT (BT-LE) ................................................................................................... 6 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal .................................................................................................................. 10 3.4 Description of Support Units .............................................................................................................. 11 3.4.1 Configuration of System under Test .................................................................................................. 12 3.5 General Description of Applied Standards ........................................................................................ 13 4 Test Types and Results ...................................................................................................................... 14 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 14 4.1.2 Test Instruments ................................................................................................................................ 15 4.1.3 Test Procedures ................................................................................................................................. 16 4.1.4 Deviation from Test Standard ............................................................................................................ 17 4.1.5 Test Setup .......................................................................................................................................... 17 4.1.6 EUT Operating Conditions................................................................................................................. 18 4.1.7 Test Results (PCB antenna) .............................................................................................................. 19 4.1.8 Test Results (Dipole antenna) ........................................................................................................... 24 4.2 Conducted Output Power Measurement ........................................................................................... 29 4.2.1 Limits of Conducted Output Power Measurement ............................................................................ 29 4.2.2 Test Setup .......................................................................................................................................... 29 4.2.3 Test Instruments ................................................................................................................................ 29 4.2.4 Test Procedures ................................................................................................................................. 29 4.2.5 Deviation from Test Standard ............................................................................................................ 29 4.2.6 EUT Operating Conditions................................................................................................................. 29 4.2.7 Test Results ....................................................................................................................................... 30 5 Pictures of Test Arrangements .......................................................................................................... 31 Appendix – Information of the Testing Laboratories ................................................................................. 32 Report No.: RF161216E08H-4 Page No. 2 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

Release Control Record Issue No. Description Date Issued RF161216E08H-4 Original release. Sep. 16, 2019 Report No.: RF161216E08H-4 Page No. 3 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

1 Certificate of Conformity Product: IEEE 802.11 2X2 MU-MIMO ac/a/b/g/n Wireless LAN + Bluetooth NGFF Module Brand: Marvell Test Model: W8997-M1216 Sample Status: ENGINEERING SAMPLE Applicant: Marvell Semiconductor, Inc. Test Date: Sep. 06 to 07, 2019 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Sep. 16, 2019 Wendy Wu / Specialist Approved by : , Date: Sep. 16, 2019 May Chen / Manager Report No.: RF161216E08H-4 Page No. 4 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

Eooert venitas 2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (SECTION 15.247) FCC Test Item Result Remarks Clause Meet the requirement of limit. 15.205 & 209 Radiated Emissions & Band Edge PASS Minimum passing margin is —7.6dB at & 15.247(d) Measurement 4960.00MHz. 15.247(b) Conducted power PASS Meet the requirement of limit. Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16—4—2: Expanded Uncertainty Measurement Frequency (k=2) (©) 9kHz ~ 3OMH 3.0 dB Radiated Emissions up to 1 GHz * * 30MHz ~ 1GHz 5.1 dB 1GHz ~ 6GHz 5.1 dB Radiated Emissions above 1 GHz 6GHz ~ 18GHz 5.0 dB 18GHz ~ 40GHz 5.2 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF161216E08H—4 Page No. 5 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

3 General Information 3.1 General Description of EUT (BT-LE) IEEE 802.11 2X2 MU-MIMO ac/a/b/g/n Wireless LAN + Bluetooth NGFF Product Module Brand Marvell Test Model W8997-M1216 Status of EUT ENGINEERING SAMPLE Power Supply Rating DC 3.3V from host equipment Modulation Type GFSK Modulation Technology DTS Transfer Rate Up to 1Mbps Operating Frequency 2402MHz ~ 2480MHz Number of Channel 40 Output Power 2.748mW Antenna Type Refer to Note Antenna Connector Refer to Note Accessory Device NA Data Cable Supplied NA Note: 1. This report is prepared for FCC class II permissive change. The difference compared with the Report No.: RF161216E08C-4 as the following:  Add new antennas as following table: Original Frequency Antenna Antenna Net. Antenna Connector Cable Brand Model Chain No. range Set. Gain(dBi) Type Type Length (MHz) 2.98 2400~2500 Chain 0(Aux) 15cm 5.16 4900~5900 1 MAG.LAYERS MSA-4008-25GC1-A1 PIFA i-pex(MHF) 2.98 2400~2500 Chain 1(Main) 15cm 5.16 4900~5900 1.9 2400~2500 Chain 0(Aux) 120mm 3.6 4900~5800 2 Bondale G-RA0K10090176-1436B Dipole RP-SMA 1.9 2400~2500 Chain 1(Main) 120mm 3.6 4900~5800 2.4 2400~2500 Chain 0(Aux) 120mm 4.4 4900~5800 3 San Jose UEN-201 Dipole RP-SMA 2.4 2400~2500 Chain 1(Main) 120mm 4.4 4900~5800 Newly Antenna Net Antenna Gain(dBi) Frequency Antenna Connector Cable Brand Model chain no. Set. included range Type Type Length cable loss 1.6 2400-2500 Chain 0(Aux) PCB I-pex 100±5mm 4.8 5150~5850 4 Unictron H2B1PC1A1C175L 1.6 2400-2500 Chain 1(Main) PCB I-pex 100±5mm 4.8 5150~5850 2 2400-2500 5 LSR 001-0012 Chain 0(Aux) Dipole RP-SMA 100mm 2 5150~5850 Report No.: RF161216E08H-4 Page No. 6 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

2 2400-2500 Chain 1(Main) Dipole RP-SMA 100mm 2 5150~5850 2.4 2400-2500 Chain 0(Aux) Dipole RP-SMA 100mm 3.4 5150~5850 6 Laird MAF94051 2.4 2400-2500 Chain 1(Main) Dipole RP-SMA 100mm 3.4 5150~5850 2.86 2400-2500 Chain 0(Aux) Dipole RP-SMA 100mm 4.74 5150~5850 7 Taoglas GW.59.3153 2.86 2400-2500 Chain 1(Main) Dipole RP-SMA 100mm 4.74 5150~5850 2.85 2400-2500 Chain 0(Aux) Dipole RP-SMA 100mm 2.17 5150~5850 8 Chang Hong DA-2458-02-SMR 2.85 2400-2500 Chain 1(Main) Dipole RP-SMA 100mm 3.13 5150~5850 2.8 2400-2500 Chain 0(Aux) PCB I-pex 100mm 4.2 5150~5850 9 Unictron H2B1PD1A1C385L 2.8 2400-2500 Chain 1(Main) PCB I-pex 100mm 4.2 5150~5850 2.562 2400-2500 Chain 0(Aux) PCB I-pex 100mm 3.094 5150~5850 10 Molex 2042811100 2.562 2400-2500 Chain 1(Main) PCB I-pex 100mm 3.094 5150~5850 1.829 2400-2500 Chain 0(Aux) PCB I-pex 100mm 2.485 5150~5850 11 Molex 1461531100 1.829 2400-2500 Chain 1(Main) PCB I-pex 100mm 2.485 5150~5850 2.98 2400-2500 Chain 0(Aux) PIFA i-pex(MHF) 5.16 5150~5850 12 MAG.LAYERS MSA-4008-25GC1-A2 NA 2.98 2400-2500 Chain 1(Main) PIFA i-pex(MHF) 5.16 5150~5850 Note: 1. Max. gain was selected for Antenna Port Conducted Measurement test. 2. Antenna Set. 4, 7 were selected for radiated emissions test. 2. According to above condition, all test items (Except AC Power Conducted Emissions and Frequency Stability) need to be performed. And all data weres verified to meet the requirements. 3. There are WLAN, BT technology used for the EUT. 4. Simultaneously transmission condition. Condition Technology 1 WLAN (2.4GHz) Bluetooth 2 WLAN (5GHz) Bluetooth Note: The emission of the simultaneous operation has been evaluated and no non-compliance was found. 5. The above EUT information is declared by manufacturer and for more detailed features description, please refers to the manufacturer's specifications or user's manual. Report No.: RF161216E08H-4 Page No. 7 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

3.2 Description of Test Modes 40 channels are provided to this EUT: FREQ. FREQ. FREQ. FREQ. CHANNEL CHANNEL CHANNEL CHANNEL (MHz) (MHz) (MHz) (MHz) 0 2402 10 2422 20 2442 30 2462 1 2404 11 2424 21 2444 31 2464 2 2406 12 2426 22 2446 32 2466 3 2408 13 2428 23 2448 33 2468 4 2410 14 2430 24 2450 34 2470 5 2412 15 2432 25 2452 35 2472 6 2414 16 2434 26 2454 36 2474 7 2416 17 2436 27 2456 37 2476 8 2418 18 2438 28 2458 38 2478 9 2420 19 2440 29 2460 39 2480 Report No.: RF161216E08H-4 Page No. 8 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

3.2.1 Test Mode Applicability and Tested Channel Detail EUT Configure Applicable To Description Mode RE1G RE<1G APCM 1 - - √ PIFA antenna 2 √ √ - PCB antenna 3 √ √ - Dipole antenna RE1G: Radiated Emission above 1GHz RE<1G: Radiated Emission below 1GHz APCM: Antenna Port Conducted Measurement NOTE: The EUT’s PCB antenna had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on X-plane. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE DATA RATE (Mbps) 0 to 39 0, 19, 39 GFSK 1 Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE DATA RATE (Mbps) 0 to 39 0 GFSK 1 Antenna Port Conducted Measurement: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE DATA RATE (Mbps) 0 to 39 0, 19, 39 GFSK 1 Test Condition: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER (System) TESTED BY RE1G 24deg. C, 65%RH 120Vac, 60Hz Nelson Teng RE<1G 22deg. C, 67%RH 120Vac, 60Hz Tom Yang APCM 25deg. C, 60%RH 120Vac, 60Hz Jyunchun Lin Report No.: RF161216E08H-4 Page No. 9 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

3.3 Duty Cycle of Test Signal Duty cycle = 0.383 ms/0.625 ms = 0.613 , Duty factor = 10 * log( 1/Duty cycle) = 2.1 Report No.: RF161216E08H-4 Page No. 10 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

Eooert venitas 3.4 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. ECC ID Remarks A. Laptop DELL E6420 482T3R1 FGC DaG Provided by Lab B. USB Dongle AzureWave USB Dongle NA NA Supplied by client C. PCIE Card AzureWave PCIE Card NA NA Supplied by client D. Test Tool AzureWave Test Tool NA NA Supplied by client E. Adapter DELL LAGSNS2—01 NA NA Provided by Lab F. Laptop DELL Peso GIWJL42 PD93165NG Provided by Lab Note: 1. All power cords of the above support units are non—shielded (1.8m). ID Descriptions Qiy. Length (m) (S‘:I:s‘/dl\‘lzg); Cores (Qty.) Remarks 1. RJ—45 Cable 1 10 No 0 Provided by Lab 2. DC Cable 1 1.8 No 1 Provided by Lab 3. AC Cable 1 1 No 0 Provided by Lab 4. Type C Cable 1 1.5 Yes 0 Provided by Lab Report No.: RF161216E08H—4 Page No. 11 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

3.4.1 Configuration of System under Test Report No.: RF161216E08H-4 Page No. 12 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

3.5 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF161216E08H-4 Page No. 13 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power: Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF161216E08H-4 Page No. 14 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

4.1.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY50010156 July 17, 2019 July 16, 2020 Agilent Pre-Amplifier EMC001340 980142 May 30, 2019 May 29, 2020 EMCI Loop Antenna EM-6879 264 Jan. 22, 2019 Jan. 21, 2020 Electro-Metrics RF Cable NA LOOPCAB-001 Jan. 14, 2019 Jan. 13, 2020 RF Cable NA LOOPCAB-002 Jan. 14, 2019 Jan. 13, 2020 Pre-Amplifier ZFL-1000VH2B AMP-ZFL-05 Apr. 30, 2019 Apr. 29, 2020 Mini-Circuits Trilog Broadband Antenna VULB 9168 9168-361 Nov. 22, 2018 Nov. 21, 2019 SCHWARZBECK RF Cable 8D 966-3-1 Mar. 18, 2019 Mar. 17, 2020 RF Cable 8D 966-3-2 Mar. 18, 2019 Mar. 17, 2020 RF Cable 8D 966-3-3 Mar. 18, 2019 Mar. 17, 2020 Fixed attenuator UNAT-5+ PAD-3m-3-01 Sep. 27, 2018 Sep. 26, 2019 Mini-Circuits Horn_Antenna BBHA9120-D 9120D-406 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK Pre-Amplifier EMC12630SE 980384 Jan. 28, 2019 Jan. 27, 2020 EMCI RF Cable EMC104-SM-SM-1200 160922 Jan. 28, 2019 Jan. 27, 2020 RF Cable EMC104-SM-SM-2000 180601 June 10, 2019 June 09, 2020 RF Cable EMC104-SM-SM-6000 180602 June 10, 2019 June 09, 2020 Spectrum Analyzer N9030A MY54490679 July 17, 2019 July 16, 2020 Keysight Pre-Amplifier EMC184045SE 980387 Jan. 28, 2019 Jan. 27, 2020 EMCI Horn_Antenna BBHA 9170 BBHA9170519 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK RF Cable EMC102-KM-KM-1200 160924 Jan. 28, 2019 Jan. 27, 2020 RF Cable EMC102-KM-KM-1200 160925 Jan. 28, 2019 Jan. 27, 2020 Software ADT_Radiated_V8.7.08 NA NA NA Antenna Tower & Turn Table MF-7802 MF780208406 NA NA Max-Full Boresight Antenna Fixture FBA-01 FBA-SIP01 NA NA Spectrum Analyzer FSV40 100964 June 04, 2019 June 03, 2020 R&S Power meter ML2495A 1014008 May 13, 2019 May 12, 2020 Anritsu Power sensor MA2411B 0917122 May 13, 2019 May 12, 2020 Anritsu Fixed Attenuator MDCS18N-10 MDCS18N-10-01 Apr. 15, 2019 Apr. 14, 2020 Mini-Circuits Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in 966 Chamber No. 3. 3. Loop antenna was used for all emissions below 30 MHz. 4. Tested Date: Sep. 06 to 07, 2019 Report No.: RF161216E08H-4 Page No. 15 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. Report No.: RF161216E08H-4 Page No. 16 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

4.1.4 Deviation from Test Standard No deviation. 4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable EUT& 3m 10m Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF161216E08H-4 Page No. 17 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Connected the EUT with the Laptop Computer which is placed on remote site. b. Controlling software (DUT labtool (1.0.0.109)) has been activated to set the EUT under transmission condition continuously at specific channel frenquency. Report No.: RF161216E08H-4 Page No. 18 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

4.1.7 Test Results (PCB antenna) Above 1GHz Data: CHANNEL TX Channel 0 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 49.7 PK 74.0 -24.3 1.13 H 198 51.7 -2.0 2 2390.00 39.4 AV 54.0 -14.6 1.13 H 198 41.4 -2.0 3 *2402.00 100.4 PK 1.13 H 198 102.4 -2.0 4 *2402.00 99.7 AV 1.13 H 198 101.7 -2.0 5 4804.00 48.6 PK 74.0 -25.4 1.44 H 208 46.3 2.3 6 4804.00 44.7 AV 54.0 -9.3 1.44 H 208 42.4 2.3 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 45.9 PK 74.0 -28.1 2.82 V 351 47.9 -2.0 2 2390.00 33.9 AV 54.0 -20.1 2.82 V 351 35.9 -2.0 3 *2402.00 95.3 PK 2.82 V 351 97.3 -2.0 4 *2402.00 94.6 AV 2.82 V 351 96.6 -2.0 5 4804.00 43.8 PK 74.0 -30.2 1.64 V 161 41.5 2.3 6 4804.00 37.1 AV 54.0 -16.9 1.64 V 161 34.8 2.3 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF161216E08H-4 Page No. 19 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

CHANNEL TX Channel 19 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 100.4 PK 1.16 H 200 102.5 -2.1 2 *2440.00 99.2 AV 1.16 H 200 101.3 -2.1 3 4880.00 48.5 PK 74.0 -25.5 1.53 H 211 46.2 2.3 4 4880.00 44.5 AV 54.0 -9.5 1.53 H 211 42.2 2.3 5 7320.00 43.9 PK 74.0 -30.1 1.68 H 166 35.7 8.2 6 7320.00 33.0 AV 54.0 -21.0 1.68 H 166 24.8 8.2 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 95.4 PK 2.93 V 354 97.5 -2.1 2 *2440.00 94.4 AV 2.93 V 354 96.5 -2.1 3 4880.00 43.9 PK 74.0 -30.1 1.58 V 177 41.6 2.3 4 4880.00 37.1 AV 54.0 -16.9 1.58 V 177 34.8 2.3 5 7320.00 42.9 PK 74.0 -31.1 2.14 V 156 34.7 8.2 6 7320.00 31.4 AV 54.0 -22.6 2.14 V 156 23.2 8.2 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF161216E08H-4 Page No. 20 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

CHANNEL TX Channel 39 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 100.5 PK 1.15 H 203 102.7 -2.2 2 *2480.00 99.6 AV 1.15 H 203 101.8 -2.2 3 2483.50 49.5 PK 74.0 -24.5 1.15 H 203 51.7 -2.2 4 2483.50 39.2 AV 54.0 -14.8 1.15 H 203 41.4 -2.2 5 4960.00 48.8 PK 74.0 -25.2 1.55 H 224 46.3 2.5 6 4960.00 45.2 AV 54.0 -8.8 1.55 H 224 42.7 2.5 7 7440.00 43.9 PK 74.0 -30.1 1.62 H 172 35.5 8.4 8 7440.00 33.3 AV 54.0 -20.7 1.62 H 172 24.9 8.4 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 95.8 PK 2.84 V 349 98.0 -2.2 2 *2480.00 94.8 AV 2.84 V 349 97.0 -2.2 3 2483.50 46.5 PK 74.0 -27.5 2.84 V 349 48.7 -2.2 4 2483.50 34.3 AV 54.0 -19.7 2.84 V 349 36.5 -2.2 5 4960.00 44.3 PK 74.0 -29.7 1.62 V 160 41.8 2.5 6 4960.00 37.3 AV 54.0 -16.7 1.62 V 160 34.8 2.5 7 7440.00 43.1 PK 74.0 -30.9 2.10 V 151 34.7 8.4 8 7440.00 31.6 AV 54.0 -22.4 2.10 V 151 23.2 8.4 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF161216E08H-4 Page No. 21 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

Below 1GHz Data: CHANNEL TX Channel 0 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9KHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 48.73 30.2 QP 40.0 -9.8 1.00 H 282 38.8 -8.6 2 72.67 25.3 QP 40.0 -14.7 2.00 H 203 36.6 -11.3 3 180.53 29.3 QP 43.5 -14.2 1.50 H 20 38.6 -9.3 4 260.86 29.5 QP 46.0 -16.5 1.00 H 255 37.4 -7.9 5 418.92 27.7 QP 46.0 -18.3 2.00 H 20 31.4 -3.7 6 491.44 28.1 QP 46.0 -17.9 1.50 H 5 29.8 -1.7 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit of frequency range 30MHz~1000MHz. 5. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF161216E08H-4 Page No. 22 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

CHANNEL TX Channel 0 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9KHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 30.45 31.5 QP 40.0 -8.5 1.50 V 309 40.9 -9.4 2 93.91 28.8 QP 43.5 -14.7 1.50 V 250 41.7 -12.9 3 137.87 26.8 QP 43.5 -16.7 2.00 V 215 35.1 -8.3 4 193.24 24.8 QP 43.5 -18.7 1.50 V 315 34.8 -10.0 5 257.35 30.0 QP 46.0 -16.0 1.50 V 203 38.1 -8.1 6 363.41 26.3 QP 46.0 -19.7 3.00 V 360 31.3 -5.0 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit of frequency range 30MHz~1000MHz. 5. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF161216E08H-4 Page No. 23 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

4.1.8 Test Results (Dipole antenna) Above 1GHz Data: CHANNEL TX Channel 0 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 47.1 PK 74.0 -26.9 1.30 H 225 49.1 -2.0 2 2390.00 35.1 AV 54.0 -18.9 1.30 H 225 37.1 -2.0 3 *2402.00 96.5 PK 1.30 H 225 98.5 -2.0 4 *2402.00 95.8 AV 1.30 H 225 97.8 -2.0 5 4804.00 45.0 PK 74.0 -29.0 1.05 H 309 42.7 2.3 6 4804.00 38.3 AV 54.0 -15.7 1.05 H 309 36.0 2.3 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 50.9 PK 74.0 -23.1 1.14 V 108 52.9 -2.0 2 2390.00 40.6 AV 54.0 -13.4 1.14 V 108 42.6 -2.0 3 *2402.00 101.6 PK 1.14 V 108 103.6 -2.0 4 *2402.00 100.9 AV 1.14 V 108 102.9 -2.0 5 4804.00 49.8 PK 74.0 -24.2 2.78 V 168 47.5 2.3 6 4804.00 45.9 AV 54.0 -8.1 2.78 V 168 43.6 2.3 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF161216E08H-4 Page No. 24 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

CHANNEL TX Channel 19 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 96.6 PK 1.28 H 212 98.7 -2.1 2 *2440.00 95.6 AV 1.28 H 212 97.7 -2.1 3 4880.00 45.1 PK 74.0 -28.9 1.04 H 312 42.8 2.3 4 4880.00 38.3 AV 54.0 -15.7 1.04 H 312 36.0 2.3 5 7320.00 44.1 PK 74.0 -29.9 2.99 H 198 35.9 8.2 6 7320.00 32.6 AV 54.0 -21.4 2.99 H 198 24.4 8.2 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 101.6 PK 1.08 V 118 103.7 -2.1 2 *2440.00 100.4 AV 1.08 V 118 102.5 -2.1 3 4880.00 49.7 PK 74.0 -24.3 2.76 V 159 47.4 2.3 4 4880.00 45.7 AV 54.0 -8.3 2.76 V 159 43.4 2.3 5 7320.00 45.1 PK 74.0 -28.9 2.84 V 142 36.9 8.2 6 7320.00 34.2 AV 54.0 -19.8 2.84 V 142 26.0 8.2 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF161216E08H-4 Page No. 25 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

CHANNEL TX Channel 39 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 97.0 PK 1.24 H 213 99.2 -2.2 2 *2480.00 96.0 AV 1.24 H 213 98.2 -2.2 3 2483.50 47.7 PK 74.0 -26.3 1.24 H 213 49.9 -2.2 4 2483.50 35.5 AV 54.0 -18.5 1.24 H 213 37.7 -2.2 5 4960.00 45.5 PK 74.0 -28.5 1.02 H 332 43.0 2.5 6 4960.00 38.5 AV 54.0 -15.5 1.02 H 332 36.0 2.5 7 7440.00 44.3 PK 74.0 -29.7 3.01 H 214 35.9 8.4 8 7440.00 32.8 AV 54.0 -21.2 3.01 H 214 24.4 8.4 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 101.8 PK 1.13 V 103 104.0 -2.2 2 *2480.00 100.8 AV 1.13 V 103 103.0 -2.2 3 2483.50 50.7 PK 74.0 -23.3 1.13 V 103 52.9 -2.2 4 2483.50 40.4 AV 54.0 -13.6 1.13 V 103 42.6 -2.2 5 4960.00 50.0 PK 74.0 -24.0 2.71 V 163 47.5 2.5 6 4960.00 46.4 AV 54.0 -7.6 2.71 V 163 43.9 2.5 7 7440.00 45.1 PK 74.0 -28.9 2.89 V 141 36.7 8.4 8 7440.00 34.5 AV 54.0 -19.5 2.89 V 141 26.1 8.4 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit. 5. " * ": Fundamental frequency. Report No.: RF161216E08H-4 Page No. 26 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

Below 1GHz Data: CHANNEL TX Channel 0 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9KHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 31.90 30.0 QP 40.0 -10.0 1.50 H 50 39.4 -9.4 2 49.35 29.5 QP 40.0 -10.5 1.00 H 272 38.1 -8.6 3 146.63 26.7 QP 43.5 -16.8 1.50 H 173 34.4 -7.7 4 249.15 30.0 QP 46.0 -16.0 1.50 H 72 38.4 -8.4 5 363.75 28.5 QP 46.0 -17.5 1.00 H 191 33.5 -5.0 6 457.54 27.8 QP 46.0 -18.2 2.00 H 37 30.5 -2.7 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit of frequency range 30MHz~1000MHz. 5. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF161216E08H-4 Page No. 27 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

CHANNEL TX Channel 0 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9KHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 49.91 31.0 QP 40.0 -9.0 1.50 V 214 39.6 -8.6 2 94.13 28.5 QP 43.5 -15.0 1.50 V 283 41.4 -12.9 3 149.55 26.7 QP 43.5 -16.8 2.00 V 79 34.3 -7.6 4 257.26 29.9 QP 46.0 -16.1 2.00 V 180 38.0 -8.1 5 364.31 27.7 QP 46.0 -18.3 1.50 V 284 32.6 -4.9 6 477.76 28.9 QP 46.0 -17.1 2.00 V 179 31.1 -2.2 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit of frequency range 30MHz~1000MHz. 5. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF161216E08H-4 Page No. 28 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

4.2 Conducted Output Power Measurement 4.2.1 Limits of Conducted Output Power Measurement For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30dBm) 4.2.2 Test Setup EUT Power Sensor Power Meter Attenuator 4.2.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.2.4 Test Procedures A peak power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak power sensor. Record the power level. Average power sensor was used to perform output power measurement, trigger and gating function of wide band power meter is enabled to measure max output power of TX on burst. Duty factor is not added to measured value. 4.2.5 Deviation from Test Standard No deviation. 4.2.6 EUT Operating Conditions The software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel frequencies individually. Report No.: RF161216E08H-4 Page No. 29 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

4.2.7 Test Results FOR PEAK POWER Peak Power Peak Power Channel Frequency (MHz) Limit (dBm) Pass/Fail (mW) (dBm) 0 2402 2.748 4.39 30.00 Pass 19 2440 2.46 3.91 30.00 Pass 39 2480 2.518 4.01 30.00 Pass FOR AVERAGE POWER Frequency Average Power Average Power Channel (MHz) (mW) (dBm) 0 2402 2.547 4.06 19 2440 2.564 4.09 39 2480 2.415 3.83 Report No.: RF161216E08H-4 Page No. 30 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF161216E08H-4 Page No. 31 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03

Appendix – Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Lin Kou EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF161216E08H-4 Page No. 32 / 32 Report Format Version: 6.1.1 Reference No.: 190815E03


Document Created: 2019-09-19 11:05:15
Document Modified: 2019-09-19 11:05:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC