|Equipment||UWB Module with Parallel/Serial/USB Interface|
|Applicant Business||Alereon, Inc|
|Business Address||7600-C Capitol of Texas Highway Suite 200, Austin,Texas United States 78731|
|TCB Scope||A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz|
|TCB Email||[email protected]|
|Applicant||David M Dickson – Sr. Principal Engineer |
|Applicant Phone|| 2137|
|Applicant Fax||512 345 4201|
|Applicant Email||[email protected]|
|Test Firm||MiCOM Labs|
|Test Firm Contact||Gordon Hurst|
|Test Firm Phone|| |
|Test Firm Fax||925-462-0306|
|Test Firm Email||[email protected]|
|Certified By||Parmveer Singh – Director of Systems Applications, Alereon Inc.|
Comment [tSZf07VqRspcpcVbNNXwfQ==]: Single module approval.
This device is approved under Part 15.519 for handheld use.
The use of antennas mounted on outdoor structures, e.g., antennas mounted on the outside of a building or on a telephone pole, or any fixed outdoors infrastructure is prohibited. Antennas may be mounted only on the hand held UWB device.
UWB devices may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited.
This device and its antennas must not be co-located or used in conjunction with any other antenna or transmitter except under the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.
OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.
OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.